Gun Cleaning Tips - Cleaning the M&P Shield
Вставка
- Опубліковано 11 жов 2024
- Just showing how I clean my handguns. I clean the M&P Shield, but I clean every other gun the same way. It's important to maintain the gun your going to carry.
Holsters:
www.warthoggear.com
Enter BTBLADES in the coupon code during checkout and receive an extra 20% off!
Thanks for watching!
BT Blades: Thanks for a very helpful video. You made this video almost 6 years ago, and it is still helping people like me.
Thank you, just bought my first gun. Easy to follow video. Love my shield.
Same as you friend. I agree simple instructions
Ahhh, a clean and happy gun!! I never get tired of gun cleaning videos.
Great video. One suggestion - something I do as the last measure of cleaning - lightly wipe down your Talon grip with rubbing alcohol and a clean patch or rag. It cleans the grip, plus renews that original feel to the rubber.
I just bought the ported 9mm shield last night. This is my first pistol and I'm going to clean it before I take it to the range so this helps! thank you!
A little tip when putting the slide back on. Don't leave the takedown lever fully out. Move it a tiny bit inwards, so that when you rack the slide it automatically locks in the take down lever. It's a bit easier than locking the slide back first, locking the takedown lever, and then releasing the slide. Hope this makes sense!
Makes perfect sense. I tried it and it worked perfectly.
I also tried that. Good tip, thanks!
I appreciate that you filmed this video in nice, bright light. easier to see what's going on. thank you.
i really appreciated this video. shows a lot more detailing in cleaning than most videos ive seen and the emphasis on metal on metal oil application was something i was looking for.
Ballistol is great on leather and I use it on my guitar necks too, preserves these things amazingly.
Got mine a month ago, this was one of the first videos I watched, really helpful!
Thanks so much. I was able to follow your instructions step by step to clean my new gun. I read the booklet several times and could not figure out what the hell I was doing wrong to get the slide off. It was so over due for a cleaning but I couldn't take it apart. Now I can disassemble and reassemble in a snap. You rock.
This video taught me how to clean my gun.
THANK YOU!
This is very helpful! I just laid away two Shields at my local gun store. One for me and one for my wife (with laser).
Built in laser?
Big Mistake!!!
Thanks! Easy to follow. Fairly new to pistols and bought my M&P Shield a few weeks ago.
Usually don't like these videos but I must say I did enjoy this one. Nice cleaning job !
Great video very informative. Cool demeanor, thanks for hanging out a cleaning guns with me man
Patrick Murphy No problem! :)
I traded up to a 9mm EZ , had to 76 years old hands shot. Love the EZ great to load ammo also but also loved my shield.🙂
thanks for the video. im a gun novice and just purchased a shield.
Great video. Definitely helped me on what products to get and how to clean my new Shield 9!
Great video--thank you. I just bought my shield and appreciate this walk-through.
Thank you for the video! Even though it's been over three years now. It helped me a lot.
No problem! I'm glad it helped! :)
thank you, thank you for such detail, we just purchased our first Shield and this was very helpful!!!!
Thanks for the video, my gun is clean and ready to go.
Thanks for explaining how to clean my new m&p 😀
Good video. I have an 11 round 40. Cleaning is a little different and it would be great to see a deep clean which this gun needs. Spent a lot of time however and wow was it dirty.. great instruction. I wish someone would do a video that shows this much slower and in greater detail. Thanks
I spray a little clp down into the barrel of the of the recoil spring and on the outside of it also since the springs slide on it.
Thanks, I just bought mine today and found your breakdown useful.
My opinion? A little extra oil is a good thing!! Metal on metal, needs lube to protect from friction and premature failure!
Frog lube and a heat gun, works miracles on my knives!
Thanks for your easy way to clean the gun !!! You was very helpful
great video. im waiting for my first gun ever to arrive and it is a 9mm shield! im gonna clean it like you do.
I use Tri-flow to lube my guns, works best for anywhere metal touches metal. Locks, hinges, bike chains, gun rails etc...
I have the .40 Shield, I've read the manual about cleaning and lube. I understand not to use a massive amount, and I understand that carbon is the enemy or semi-autos. But, not having enough oil in the rails, front top portion of the barrel, top front portion of the chamber housing, and some oil in the inside slide near the safety plunger area could cause some issues. Gun create a lot of friction when used, and, due to the recoil and forces exerted by the handgun, oil does come out of the firearm during use due to friction and force. It seems to me that applying an amount of oil that seems like it could barely keep anything properly lubed seems like it would be hard on the gun in the long run. It almost seems like you used none at all. Heat and carbon are enemies of all firearms, but, thats just how I clean and oil my guns. Not too much, not too little.
Very informative. Thank you for taking the time to post this.
Have you tried using the printer foam cleaning “q-tips” instead of cotton : ) they don’t tear apart at all and work great!
Good basic video but carbon builds up by the striker as well and left unchecked eventually you could have serious issues. People should not avoid that area all together thats a area that say every 3rd cleaning should get some birchwood casey " gun scrubber " down it than a little dry lube so it does not attract any fouling just my 2 cents.great vid other than that.
Chris Cochrane Thanks for the tip! I think you're right. I was just showing a basic cleaning. I do fully disassemble my guns and clean every peace of it when it needs to be done.
Wait.......did you just take a cleaning patch to the dirty inside portion of the lower and then wipe it on the outside of your weapon?
Not judging but only curious, will that do anything to the polymer potion of the weapon?
Clean the breach face upside down to prevent solvents and debris from entering the firing pin channel.
Nice video. Simple and straight to the point. Shalom.
Qtips are good at times, but fir a good cleaning, nylon picks are key
wtf i just bought a shield and i was showen that the only way to take apart the gun was to pull the slide back drop the slid release and pull down that little yellow lever in the magazine channel and all you did was just pulled the trigger doing it that way is so much easier than fighting to catch that stupid little lever
+Evak Blades they have that lever in there so you dont have to dry fire it. But ya its easier just to dry fire it. Its just a way for s&w to cover there asses if someone shoots themselves while disassembling it.
+Brian J Yaap. Dry firing to take it down is just like how a Glock works.
Haha! The first I thing I noticed was how he was able to do that. Unfortunately, my version of the Shield has a magazine safety. You cannot fire it without a magazine in there.
If you hate having to find a tool to pull down that lever, you can:
1. Clear the pistol
2. Insert an EMPTY magazine
3. Rack and close the slide
4. Point in a safe direction
5. Pull the trigger
6. Release the magazine
You should be able to move the slide forward at this point. Please note the emphasis on having an empty magazine in there. Please note my emphasis on making sure your pistol does not get a live round in the chamber (steps 1 & 2).
Mel C That's weird. Mine says, 'Caution - capable of firing with magazine removed' right on the slide. Mine is a 9mm w/o a thumb safety. The first time I took it down I used the yellow lever. Once I figured out it works just like a Glock, I've never touched that yellow lever since. Lol.
vanslem6 I live in California. That says it all.
Love the Shield 9mm. Never failed me yet
Throw down a lot, do ya?
Thanks. Bought one today. I noticed you didn't use a screw driver to push the yellow pin down inside the chamber. Should you?
Very good video. Easy to follow, good tips. Placed an order for the holster before finishing the video. Promo Code was a plus. Thanks
Thanks for the informative video! I love the shield!
Wow - great tutorial. Thank you for sharing this - it has been very helpful.
20% is a legit discount!! Thanks for sharing!!
No Problem! Thanks for watching! :)
Clean after every time out on the range or not? It's not absolutely necessary, especially if the weapon is just to have around or for show. Personally, I don't want to rely on a dirty weapon when I need it the most, in a defensive situation.
Wat
You say most other websites to buy holsters from say they ship in 8-12 weeks?? Can you please provide some links? I have never seen a website say it would take that long
only thing is though for me anyway the dirtiest spot always seems to be around the firing pin. lots of carbon on my shield and 1911. i use hoppes solvent around it and no oil.
Question - does the steel on the bore snake not damage the barrel?
Just thinking since it’s metal on metal, might cause an issue?
Great cleaning tips, thank you for sharing!
I use clp for the solvent and lube. Would you say clp is an adequate lube?
Weapons Shield grease, the best!
the sound of that qtip is brutal
I was thinking the same thing. had to turn the volume way down lol
+Josh 72 triggered my ASMR.
Should be using lubrication when doing that
Like nails on a chalk board.
Made me cringe lol
Thanks, Very informative.
Awesome video, thank you
Curious why you did not move the sear deactivation lever downward 90 degrees like it says in the M&P manual (page 24)? That's the little yellow piece you can see when you look down into the mag well after locking the slide back. I always do that to mine, but wonder if it makes any difference on reassembly?
Sidney Patin Not all Shield's have the take down lever for some reason. My wife and I have both had ours for about 3 years and neither one has the lever. My guess is maybe his doesn't either. Not sure, like I said just a guess.
His gun has the yellow takedown lever. If you watch closely around 2:40 to 2:45 in slow motion you will see it. Watch how he does it. After flipping the slide lock lever he lets the slide almost all the way back down while pulling the trigger and when it dry fires the slide will then come off because the pistol has been decocked, which is the function of the yellow decocking lever.
Joe H I just recently bought one and I would like to know this, is there a trick around it the yellow lever?
Just let the slide back down after you flip up the take down lever, then move the slide into firing position and pull the trigger as if you were dry firing it. I keep my hand on the slide and when I feel it released I just slide it off. It makes no difference when you reassemble it.
He has done it! He has embraced who he is and ascended to memedom. I'm so proud of you young Dillon. May you take your seat alongside the other meme gods.
I love how people cluck on how to clean gun video, only to make sure it's done right.
Great video. Thank you!
Do you not find using so much CLp to clean leaves everything overly oily? The only time I attempted to use a CLP for cleaning it left massive oil
Great video thanks for making it! Great tips
Question. My california compliant sheild doesn't dissassemble without pushing the damn seer down first. I need to sell it and get me a non-compliant sheild. That seer thing is b.s.
I see now that the trigger disconnect is the source of the problem. Because of that trigger disconnect damn "feature" of the california compliant version you have to push the seer down first to take the slide off. That sux
ZFlyingVLover I have a CA compliant shield as well... Didn't understand how easy it was for BT... I just insert an empty magazine and then it slid off just like BT showed it... CA compliant weapons need to have the magazine installed.
Its easier than trying to push down the seer....and you save your fingers from getting pinched....
Try it...
Really enjoyed the video.
Thanks! I hope it helped! :)
We're can I order the holster. What website, please send me the link. And what is the coupon code. Thanks
And I'm surprised you dont lube the top of the 4 slide rails.
eXCELLLENT !!! video what do you like for a cleaning kit?
Good video and information. Thank you.
I'm just curious, but can you also lubricate the recoil spring or would you just leave that dry after you have cleaned it?
+Joshua Jacob I wipe it down, but I don't put any additional lubrication on it. Usually whatever I wipe it down with has a little on it.
Just went to clean my new Shield 9, but I cannot set the slide stop, I push it up, but it won't latch. Sure could use some help.!
the slide has to be pulled back further than expected, just keep going you'll see
Excellent video....btw looks like you have Talon grips on your gun. How do you like them? I am considering installing Talon's on my Shield as well.
+nordic27 I like them a lot! I prefer the rubber ones for carry guns. I had the granulate ones, but it kept sticking to my shirt so I switched them out for the rubber ones.
Thanks for the response. Talons on the way to my house. Happy New Year!
Try a houge slip grip love the finger grooves
is that a talon grip you have ? i ordered one too is that grip better then the hogue grip?
Nice Video! Thanks for the upload!!
Yes this vid is still up!
thanks so much for the help
warthog is just a glok fan boy site. couple for the 1911. but nothing for the m&p shield.
can i get the names of the different oils and items you use to clean your gun please! much appreciated!
Informative. Thanks.
Can I use that Ballistol eco skin safe to clean and lube it? And not use the 9 line or the CLP?at all?
This is helpful thanks, however after I took mine apart and put it back together while the slider was locked back I noticed the barrel seemed loose. Is this normal and I just didn't notice it before or did I put it back together incorrectly
The barrel will be a little loose. That's okay. If you notice, it actually will move and angle down when you rack the slide, in order to help chamber the next round. Unlike a Hi-Point, the barrel is not pinned to the receiver.
Great thanks!
The shield is a glock interior with a S&W exterior.. Don't know how they got around glock's patents
Great vid bro ... have you ever had any problems with the recoil spring ? I’ve seen some vids where the spring pops off the guide rod and was wondering if that’s common or not. Thank you !
access oil removed
strayed cat 😂
Thanks for the video.
I took my shield to the range today and shot 200 rounds. When i cleaned it i did oil the striker pin and the slide. Would that be a problem??
I don't know if anyone has ever answered you...but it just seems to be the place with the most buildup....so oiling it would catch more...in return having to deep clean it more often....in the owners manual it has seven contacts to oil...two spots front and back on the barrel, two spots on the front rails, two spots on the back rails, one spot where the trigger mechanism initiates the pin....there's like a swivel hinge in there..
Kenyon Murphy all I have is CLP,is that good enough to clean everything?
never oil the firing pin!
I noticed, you didn't lower the sear deactivation lever prior to rotating the take down lever and removing the slide, as is recommended in the manual. Your reason for this, please? Also, you lubed the sides of the rails, but not the tops, where the coating is worn off. Again, your reason for this. Any thoughts welcome.
And thanks for the discount code for the holsters!
Own the same gun as well as the compact version. The sear deactivation is a pain in the ass. The Dude safety checked the pistol twice. Much easier to just pull the trigger to release the slide. Just like him I'm a trigger puller as well.
Manual states that only for safety reasons. My then M&P9c came with a tool, but not the shield so it's easier to just pull the trigger, just make sure it's safety checked first. As far as lubrication, it doesn't take much lube to lube the gun and the coating on the rail will wear off regardless of how much lube you put on there.
Philip Beal Get with the current times and for safety reasons you are NEVER better off having to pull the trigger. It's violating the safety rules and invites a ND, ask any Glock-fool. Pulling the trigger to strip is rapidly becoming a thing of the past unless you are a Glockhole. And it's not a PITA at all to use the sear deactivation lever- you just need an adequate tool to assist in the process.
brentfoto Thanks for your reply, but I guess I'll stick to being a trigger puller...as I have been doing for the past 15 years...
Philip Beal {Philip- It only takes once! Anyway, that type of attitude is for the old. No offense, but are you an old man? If so, get with it, dinosaur!!! haha
Nice video , I'm a new mp shield owner.. Took to range once only put 50 rounds through it .. Is it overkill to clean it after every use ?
They should work even if they are dirty correct ? All the stories about glocks working well when tortured just seems like overkill to polish after every use but I'm no expert just a thought ?
+efthimios Yes it should work after use, but you spent the money and bought it. So far I have had no problems with my Shield, but I still like to take care of it and clean it.
Herakles
that is the next thing about shooting a gun is cleaning it!
It’s a machine clean it and lube, Weapons Shield grease or Ballistol!
Might be a stupid question but Im new to guns... Why are you so concerned about oil near the striker pin? Wouldnt oil help keep it moving smoothly?
because the oil attracts carbon build up
Ah gotcha thanks
Nice video!
I have the same exact gun for some reason it’s not firing I believe the fire pain is not protruding Is it possible something is wrong with the striker block?
Reem M could be some oil clogging or even a small piece of debris.The American Gun Institute cleans guns with Simple Green And hot water. Take the gun apart and toss all the parts in. Let it soak for 5/10 minutes. Take it out scrub with tooth brush. Rinse with hot water and dry with clean towel and hair dryer. Guns do not need a lot of oil.
Thank you for your video.
U R a PRO.
should I clean my guns after everytime at the range
Cant you just use CLP to lube the rails, since CLP is also made to lubricate?
SergiuM42 I could, but I always like to mix it up.
Could one use fully synthetic motor oil for general lubing - something like Mobil 1? To my mind if its made for high end engines it should be more than enough for a firearm slide?
At the end do you need to move the yellow lever back from the magazine well?
No, that automatically gets put back up when you put a mag back in.
Good clear well done video- thanks.
Neil @ TNK
nice, thank you!
Thanks !!! Great vídeo