I have an older version of same exact unit except I removed that junk 8hp Briggs replaced it with a 9hp vanguard engine much better yes much better & reliable engine...
I have a question. I had a 4000 watt generator from harbor freight and a small welder with a cord that converts it from 220 to 115v. The thing is, the generator couldn't hang at even 90amps, it kept turning off. So Im Wondering why a 4k watt welder generator would be any different
This welder was made to provide 4000watts ac or 125 watts ac for welding, the breaker on your welder isn't rated at high enough, get a inverter welder VS I'm assuming a transformer ac flexcore hf welder and run on 220, look at my channel I made a video talking about this and the nice dc welder I bought on Amazon for $150/160 it's "klutch welder review"
hi. i need some help with my lincoln Arc power 5500. when i start stick welding. the power goes suddenly down. it doesn't, turn off but the engine start going Up and down. thanks.
If it surges like that with no load it could be a dirty carb or just bad gas , drain the bowl for 10 seconds if it has a screw in the bottom of it otherwise take the bowl off , but thats not your problem your governor spring is not tight enough or maybe to loose go a 1/4 at a time one way and see how it is under load if it gets worse go the other ! Count the turns so you have a referance point !
Eh 125 amps ac 1/8 6011 rod can weld 3/16-1/4 one pass but with a few passes or z weave with 7018ac you can weld some pretty thick metal but in the welding would 125amps max for a welder is really low.
Vendamela
Alguien que venda una de estad
I have the same one. Upgraded it to electric start, much more user friendly. But it’s not neighbor friendly.
Precio
I have an older version of same exact unit except I removed that junk 8hp Briggs replaced it with a 9hp vanguard engine much better yes much better & reliable engine...
john siira please tell me what engine you used, I was told I couldn't use diff engine, my 8hp blew a rod last week
Hi John Siira could you tell me what model series you had set on you machine
Briggs & Stratton 9 HP ES Vanguard Engine
what is the model number for the gas tank cant find it on my manual. can anyone help me? mine caught fire trying to fix
I have a question. I had a 4000 watt generator from harbor freight and a small welder with a cord that converts it from 220 to 115v. The thing is, the generator couldn't hang at even 90amps, it kept turning off. So Im Wondering why a 4k watt welder generator would be any different
This welder was made to provide 4000watts ac or 125 watts ac for welding, the breaker on your welder isn't rated at high enough, get a inverter welder VS I'm assuming a transformer ac flexcore hf welder and run on 220, look at my channel I made a video talking about this and the nice dc welder I bought on Amazon for $150/160 it's "klutch welder review"
hi. i need some help with my lincoln Arc power 5500. when i start stick welding. the power goes suddenly down. it doesn't, turn off but the engine start going Up and down. thanks.
Sounds like your main jet in carb is dirty. Try cleaning it out good. It's surging cause it's not getting enough fuel.
Ricardo Matheus the governer spring needs to be adjusted a little
If it surges like that with no load it could be a dirty carb or just bad gas , drain the bowl for 10 seconds if it has a screw in the bottom of it otherwise take the bowl off , but thats not your problem your governor spring is not tight enough or maybe to loose go a 1/4 at a time one way and see how it is under load if it gets worse go the other ! Count the turns so you have a referance point !
Price
Will the older units run like a hot water heater and a/c
How thick of steel can this machine weld? In 1 pass?
Eh 125 amps ac 1/8 6011 rod can weld 3/16-1/4 one pass but with a few passes or z weave with 7018ac you can weld some pretty thick metal but in the welding would 125amps max for a welder is really low.
Max amps my Lincoln ranger 8 was 210dc and 375 amps dc with my 72 sa 200
For alot of things 100 or 125 amps will do to be far for like around the house or Fences but you would limit yourself badly with a welder like this.
Show me in the box
Can these handle 4.00 mm rods?.
Generator welding machine ki kimat kitni hai
Quirosaver a donde conseguir refacionne
Napa auto parts
Replace the engine
Will only weld DC rods?