I just got this from the Play Store for free using my Play Pass subscription and I'm still not quite sure how to set it up... I will have to watch your video again and see if I can figure something out. Thanks for posting this! Cheers mate! Although my last name is Cornwall, im not from the UK or anywhere near there. US based Cornwall lol
I use Torque Pro to monitor the DPF level in my Hilux, it’s one of the hundreds of sensors you can scan. I added a few custom PID codes to watch the auto converter and pan temps of the transmission.
i got myself one of these but have ended up going to a scan gauge 3. i just found my iphone didnt like working on both the odb2 and carplay at the same time. now i have both and ended up mounting to the pillar using a scrub king mount
Gday Adam, installed and all working fine. Reason for install is to monitor trans temps prior to and after install lock up converter kit. One thing that caught my eye in the vid was the dual usb on the right side of the column, where can i get one of these please?
Great instructional video, I am struggling to get transmission temp on any App I try. I think your video may hold the key. Please tell me (TCM)ATF TEMPERATURE, is that available on the standard App of Car Scanner or did you upgrade to a Pro level. Cheers Mike
Adam, have you found a scanner for Isuzu Dmax's that can do the DPF resets and forced regeneration etc yet? I have been searching for ages. I have had no issues in the nearly 3 years I have had mine. Actually no issues at all. Touch wood. Just be nice to know if it does happen in the middle of TimBuckToo you can do something. Hope your good mate.
Hi great Video. I have a 2024 Dmax and the Trans temp comes up on Car Scanner standard version but no engine oil temp. What is the PID to get the EOT? Thanks
I purchased a mid range mini tablet that i use just for this and so i can still use phone etc through the stereo. Is there anyway we can find a list of what is considered normal values so then we can see if things like boost, fuel pressures etc are low or high readings. Thanks Adam 👍🏻
Very helpful! I just got a quick question, i have the wiring connection using an Els27 instead of an Obd2 wireless, do u know how to connect it so the car scanner app can talk to the car mate?
Hi Adam, got all the gear you recommend, set up the screen just like you have done. My question is how do I find out what parameters I need to set each sensor too( highs and lows)? I have a current model MUX so engine is the same as the Dmax. I will be towing so coolant temp and transmission temp are what I really want to monitor. Cheers Jeff
Yeah I've been trying to find something from isuzu to specifiy this but no go so far. If it helps, I've got both my trans and coolant set at 100 as you should really start backing off once off this
Good timing. I've been using car scanner pro as I find it picks up more sensors than torque. However, when it's running, android auto grinds to a halt on my phone/head unit. At least it seems to be related. I think I've just reached the limit of the handset as it does get pretty hot. Might need to use a separate handset for each task. FLM
@@VideoShowMeHow I have a OnePlus 8T which is a couple of years old now. I presume it's related to the multitasking as it only seems to be a problem when running car scanner. I will report back once I've done more testing, but I do love being able to keep an eye on temps etc
Very insightful video! We have a DMAX as well and were about to tow a big boat interstate. We want to be able to check the ATF Temp by ourselves, we have the torque app pro at the moment but we got no luck with knowing the right codes to add a PIDS for the ATF temp. In car scanner pro, will you be able to read the transmission temp right away or is it same with the torque app that you need to input some codes to add the ATF temp? I hope you'll notice this comment thank you
Hi I got obd2 just wondering how did you set up the costumes you dash bord with the automatic transmission if you can let me become I am towing a carvan cheers Goran
Mate, Firstly love the videos. I purchsed the Obd2 and car scanner app but cant get the trans temp to operate, everything else connected no problems. Any tips? Cheers Paul
Hey Paul, I had the same problem. (2022 XT) It's all in the "Connection Profile". Open the app, Go settings...Connection Profile, scroll down to Isuzu. Then hold or double tap Isuzu and you'll come up with a couple of model options. Pick the D-Max Gen 3 and the transmission temps will be available.
@@mustangdude11 Juat had a look at the settings and definitely have the gen 3 dmax ticked. Even deeper on the settings it wont list the transmission. Its like its not fitted
@@paulhead7630 I contacted the app developer, he's a Russian smart ass but I put up with it to get the app working. Do it through the play store. That's how I found him.
Great video! Trying this method but what we have is a wired elm327 not the wireless. Im just wondering if you know how to connect it so that the car scanner will talk to the car? I’ve tried tinkering around it theres two options via wifi or bluetooth but i cant seem to find the elm327 obd2 on both even if the phone and car is already connected tru the wired obd2. Hoping you know something about it. Thank you
Just bought myself one of the recommended OBD2 ones below for TF bt50, mainly wanting trans temps. When I select TCM 1 or 2 I don't get any data. Did you have to do anything else to get the data ? Wondering if because it's the eBay one it doesn't recognise, or maybe the Bt don't have that temp sensor
Another great video Adam. Fortunately, this one didn't tempt me to buy a new expensive farnarkle! I've been using Car Scanner Pro (Apple) for a while but cannot locate the TCM ATF in the sensor list. Is that a special addition only on Android? Or did you create a special PID?
Hi mate from what I understand only the android head units can use the app directly from the source. The Kenwood's have a screen mirroring function which would work I'm sure the alpines would as well which could be an option? Also i did see somewhere someone putting a PID code for trans temp with the torque pro not sure if it is possible or not?
Nice video question will this rest my tire pressure light 2021 Volkswagen Jetta I have an aftermarket radio I used to be able to rest it trough that I also took it in to the dealership they couldn’t scan it either they said only trough the factory stereo?
Hey Adam fantastic video. I did the update but can’t seem to find the trans temp on the list. Has it got a special name or did you have to enter a code. Also which ones do the burn temps. Any help would be appreciated
I had the same problem. (2022 XT) It's all in the Connection Profile. Go settings...Connection Profile. Here your scroll down to Isuzu. Then hold or double tap Isuzu and you'll come up with a couple of model options. Pick the D-Max Gen 3 and the transmission temps will be available.
I had the same problem. (2022 XT) It's all in the Connection Profile. Go settings...Connection Profile. Here your scroll down to Isuzu. Then hold or double tap Isuzu and you'll come up with a couple of model options. Pick the D-Max Gen 3 and the transmission temps will be available.
@@brendanperrett4438 my understanding is for the fruit phones you need a wifi obd module as I don't think the Bluetooth versions work with that platform
I OWN A 2018 VW AMAROK ULTIMATE. I HAVE JUST INSTALLED A SONY HEAD UNIT BUT IT NOT CAPABLE OF READING OBD2 SO WOULD CONNECT READER TO SAMSUNG ANDROID. CAN YOU ADVISE WHERE I MIGHT BUY A QUALITY READER. IM LOCATED IN BRISSY. (SORRY ABOUT CAPS---- NOT SHOUTING AT YOU YOUR ASSISTANCE WOULD BE APPRECIATED.
I bought this just so I can read the transmission temperature because I'm towing a 10,000 lb camper a paid for scanner pro but I can't find a transmission temperature option..?
I just tried this on a new 2023 D-Max and unfortunately the transmission temp does not work!, everything else does! :-(. Transmission temp was all I actually wanted!
I'd love to be able to see my trans temps but i get no readout on those guages. Other telemetry works fine but can't get trans temp any ideas? Using Car Scanner Pro wirh android and the mini OBDII reader in your list.
@@VideoShowMeHow yep i ordered it straight from your links. Thanks so much for providing such good content too I've applied many of your mods to my dmax.
Adam, I went into my settings on Torque and I have no PID settings for the 2021 Dmax. Where do you get them from? I purchased both the Torque Pro and the OBD2 Aust device (from your link). Can you advise please mate?
If you watch the video from 4:48 I show the 'Car Scanner' app, this has the trans temp PID etc all built in, you can just select like any other sensor and display how you want This is the app I run now.
yep, pretty well exactly the same way, only issue is I think toyota only started moving to the obd2 standard from 1996, so pre that you may not have a port :( It will look the same, try the fuse box in foot well and engine bay to see if there's one there
its on google play store not Apple store, the one on apple is a scam and ask for subscription. just let your followers know and delete the apple link its incorrect , thanks Bro +
@@VideoShowMeHow yeah im using the dashboard that I created. I double tap and define my own gauges. The atf 1 or 2 will appear. But won’t record anything. It doesn’t even record on the live page.
Hello. Do you know if there is an option to change/set up a clock time in the car? I removed the stock radio from my car and putted in a chines one, and i need to set up correct time now
@@VideoShowMeHow Thank You🙂👍and what about service date? Can i delete/set a new one? And bleeding ABS pomp? I have a few cars and in every one i have something to do😄
CHECK-OUT THE FULL ISUZU D-MAX BUILD HERE -> ua-cam.com/play/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB.html
Every time I watch your videos it cost me money haha
@billyray4272 tell me about it I pick my new dmax this Wednesday and I'm already 3k in his easy modifications
I just got this from the Play Store for free using my Play Pass subscription and I'm still not quite sure how to set it up... I will have to watch your video again and see if I can figure something out. Thanks for posting this! Cheers mate! Although my last name is Cornwall, im not from the UK or anywhere near there. US based Cornwall lol
Got myself an OBD2 reader and the car scanner app because of you. Thanks Adam. 👌👌
Thought of getting one of these. Now at least when I do get one I know what I'm looking at. Well done King
I use Torque Pro to monitor the DPF level in my Hilux, it’s one of the hundreds of sensors you can scan. I added a few custom PID codes to watch the auto converter and pan temps of the transmission.
Yeah I used torque for ages, but no trans temp for the dmax :( Car scanner updated to include it so I switched :)
I use car scanner too. But it picks up two ATF Temps 1 and 2. And Temp too fluctuate more frequently than Temp 1. Do you get the same?@@VideoShowMeHow
Awesome vid, great insight into this tool. Just ordered one so pretty excited now. Cheers, pls keep up great work 🎉
i got myself one of these but have ended up going to a scan gauge 3. i just found my iphone didnt like working on both the odb2 and carplay at the same time. now i have both and ended up mounting to the pillar using a scrub king mount
Good explanation, we got a reader, but no instructions with it, 👍
Gday Adam, installed and all working fine. Reason for install is to monitor trans temps prior to and after install lock up converter kit. One thing that caught my eye in the vid was the dual usb on the right side of the column, where can i get one of these please?
There's a few brands, the one I've installed is from Stedi
What a great soft ware add on ,using your phone i-phone or Android ,Good1 Adam 👍
Great instructional video, I am struggling to get transmission temp on any App I try. I think your video may hold the key. Please tell me (TCM)ATF TEMPERATURE, is that available on the standard App of Car Scanner or did you upgrade to a Pro level. Cheers Mike
Went the Pro version to get the trans temps
Adam, have you found a scanner for Isuzu Dmax's that can do the DPF resets and forced regeneration etc yet? I have been searching for ages. I have had no issues in the nearly 3 years I have had mine. Actually no issues at all. Touch wood. Just be nice to know if it does happen in the middle of TimBuckToo you can do something. Hope your good mate.
Great vid as always, does the phone still work in conjunction with this feature,cheers Craig
Yep sure does, just like any other app 👍
Hi great Video. I have a 2024 Dmax and the Trans temp comes up on Car Scanner standard version but no engine oil temp. What is the PID
to get the EOT? Thanks
I haven't been able to get either, unsure if there's a sensor?
I purchased a mid range mini tablet that i use just for this and so i can still use phone etc through the stereo.
Is there anyway we can find a list of what is considered normal values so then we can see if things like boost, fuel pressures etc are low or high readings.
Thanks Adam 👍🏻
Have been looking for some data like this but yet to find any unfortunately
Very helpful overview!
Hi Adam ,Great vid , can i be rude and ask a quick question with your egt setting have you adjusted the range ?
hey there, asking q's ain't rude, fire away :) No I left the range on auto but I think you can set custom min/max in the app
Very helpful! I just got a quick question, i have the wiring connection using an Els27 instead of an Obd2 wireless, do u know how to connect it so the car scanner app can talk to the car mate?
Hi Adam, got all the gear you recommend, set up the screen just like you have done. My question is how do I find out what parameters I need to set each sensor too( highs and lows)? I have a current model MUX so engine is the same as the Dmax. I will be towing so coolant temp and transmission temp are what I really want to monitor. Cheers Jeff
Yeah I've been trying to find something from isuzu to specifiy this but no go so far. If it helps, I've got both my trans and coolant set at 100 as you should really start backing off once off this
Thanks Adam, also purchased the ram and wireless quad lock gear as well. Love your vids. Cheers Jeff
Cheers mate!
Good timing. I've been using car scanner pro as I find it picks up more sensors than torque. However, when it's running, android auto grinds to a halt on my phone/head unit. At least it seems to be related. I think I've just reached the limit of the handset as it does get pretty hot. Might need to use a separate handset for each task. FLM
Oh interesting,, which phone? I run a pixel6pro and runs no probs?
@@VideoShowMeHow I have a OnePlus 8T which is a couple of years old now. I presume it's related to the multitasking as it only seems to be a problem when running car scanner. I will report back once I've done more testing, but I do love being able to keep an eye on temps etc
Very insightful video! We have a DMAX as well and were about to tow a big boat interstate. We want to be able to check the ATF Temp by ourselves, we have the torque app pro at the moment but we got no luck with knowing the right codes to add a PIDS for the ATF temp. In car scanner pro, will you be able to read the transmission temp right away or is it same with the torque app that you need to input some codes to add the ATF temp? I hope you'll notice this comment thank you
Yep the scanner pro has it built in out of the box 👍
Hi I got obd2 just wondering how did you set up the costumes you dash bord with the automatic transmission if you can let me become I am towing a carvan cheers Goran
Mate, Firstly love the videos. I purchsed the Obd2 and car scanner app but cant get the trans temp to operate, everything else connected no problems. Any tips?
Cheers
Paul
Does it show in the list? A few people have commented, I think you might need the pro version of the app (is a couple bucks)
Hey Paul, I had the same problem. (2022 XT) It's all in the "Connection Profile". Open the app, Go settings...Connection Profile, scroll down to Isuzu. Then hold or double tap Isuzu and you'll come up with a couple of model options. Pick the D-Max Gen 3 and the transmission temps will be available.
@@mustangdude11 Juat had a look at the settings and definitely have the gen 3 dmax ticked. Even deeper on the settings it wont list the transmission. Its like its not fitted
@@paulhead7630 I contacted the app developer, he's a Russian smart ass but I put up with it to get the app working. Do it through the play store. That's how I found him.
Hi Adam, any luck getting this onto the factory head unit?
@@MichaelMirosevich yes! This and torque are now available on Android Auto 👌
Great video! Trying this method but what we have is a wired elm327 not the wireless. Im just wondering if you know how to connect it so that the car scanner will talk to the car? I’ve tried tinkering around it theres two options via wifi or bluetooth but i cant seem to find the elm327 obd2 on both even if the phone and car is already connected tru the wired obd2. Hoping you know something about it. Thank you
Hmmmm unsure, maybe message the developer?
Can you adjust the TPMS pressure settings with the OBD reader??
Not as far as I know
Which EGR sensors are you using, can’t quite tell from the video.
Just bought myself one of the recommended OBD2 ones below for TF bt50, mainly wanting trans temps. When I select TCM 1 or 2 I don't get any data. Did you have to do anything else to get the data ? Wondering if because it's the eBay one it doesn't recognise, or maybe the Bt don't have that temp sensor
Need the pro version of the car scanner app I found
Another great video Adam. Fortunately, this one didn't tempt me to buy a new expensive farnarkle! I've been using Car Scanner Pro (Apple) for a while but cannot locate the TCM ATF in the sensor list. Is that a special addition only on Android? Or did you create a special PID?
Hmm unsure don't have an apple device to test with. Maybe uninstall reinstall to see if it appears as was in the latest update?
@@VideoShowMeHow Turns out to be a failure by the organic element - I had selected the wrong DMax model. D'oh!
Hi mate from what I understand only the android head units can use the app directly from the source. The Kenwood's have a screen mirroring function which would work I'm sure the alpines would as well which could be an option? Also i did see somewhere someone putting a PID code for trans temp with the torque pro not sure if it is possible or not?
Yeah I've tried all sorts of PID codes since I got my dmax but none worked. Must be a new one I'd say
Nice video question will this rest my tire pressure light 2021 Volkswagen Jetta I have an aftermarket radio I used to be able to rest it trough that I also took it in to the dealership they couldn’t scan it either they said only trough the factory stereo?
That's your TPMS light, you should be able to reset this yes
Hi, may i know why i purchased full version also cant detect the atf temp? Need add pid manual?
Thank you😅
@@junweilim9768 hmmm no should just be listed as one of the options? Mine shows directly in the list?
Hey Adam fantastic video. I did the update but can’t seem to find the trans temp on the list. Has it got a special name or did you have to enter a code. Also which ones do the burn temps. Any help would be appreciated
No was just in the list for me? You may need the pro version?
I had the same problem. (2022 XT) It's all in the Connection Profile. Go settings...Connection Profile. Here your scroll down to Isuzu. Then hold or double tap Isuzu and you'll come up with a couple of model options. Pick the D-Max Gen 3 and the transmission temps will be available.
I had the same problem. (2022 XT) It's all in the Connection Profile. Go settings...Connection Profile. Here your scroll down to Isuzu. Then hold or double tap Isuzu and you'll come up with a couple of model options. Pick the D-Max Gen 3 and the transmission temps will be available.
So the Car Scanner App is the best one then?
As of right now, yes imo.
Looks like the OBD2 reader isn’t compatible with IPHONE, do you know of one that is ?
@@brendanperrett4438 my understanding is for the fruit phones you need a wifi obd module as I don't think the Bluetooth versions work with that platform
How about hybrid battery detials for honda vehicle
I OWN A 2018 VW AMAROK ULTIMATE. I HAVE JUST INSTALLED A SONY HEAD UNIT BUT IT NOT CAPABLE OF READING OBD2 SO WOULD CONNECT READER TO SAMSUNG ANDROID. CAN YOU ADVISE WHERE I MIGHT BUY A QUALITY READER. IM LOCATED IN BRISSY. (SORRY ABOUT CAPS---- NOT SHOUTING AT YOU YOUR ASSISTANCE WOULD BE APPRECIATED.
Have what I used linked in the description if that helps
Is it possible to read the ABS codes with the app?
Unsure sorry, not usually via these OBD readers, usually need the dealer type units. Haven't tested on the DMAX though
I have one of these and have added the PID codes for transmission temp and can see the dial in the dashboard but cant get it read the temp. Any clues?
I've only been able to get it working on the paid version of the car scanner app
Hello there can I use it on a 80series petrol 4wd if so how
How can I get one of does is great 😮
Linked in video description 👍
Hi Adam, how do you get the dials up like you have? Cheers Jeff
Is via the app, I've used custom dials, I show this in the video
Thanks Adam, found it
Hi Adam, the blue screen that you have set up, are all the red zones set up as you prefer them? Cheers Jeff
Yeah, you can set max and min to where you like etc
I bought this just so I can read the transmission temperature because I'm towing a 10,000 lb camper a paid for scanner pro but I can't find a transmission temperature option..?
I have it listed as [TCM] ATF temperature #1?
I just tried this on a new 2023 D-Max and unfortunately the transmission temp does not work!, everything else does! :-(. Transmission temp was all I actually wanted!
With the pro version of car scanner?
@@VideoShowMeHow no, standard version.
Yeah need the pro version for trans temps. There is no change to the drive line etc for 21+ D-Max to date so will work the same as my 21
@@VideoShowMeHow Thanks mate appreciate it. Funny that I tried it on a Mitsubishi ASX and I could read the trans temp.
Is the Pro version at a cost?@@simonmaton
I'd love to be able to see my trans temps but i get no readout on those guages. Other telemetry works fine but can't get trans temp any ideas? Using Car Scanner Pro wirh android and the mini OBDII reader in your list.
Hmm def running the latest version? Mine just appears in the list, there's 2x different types
@@VideoShowMeHow yeah i can see them in the list CTM transmission temp 1 and 2 but no readout. Yours works?
Yeah works fine, can see in the vid. You've got the same reader as me? In a dmax?
@@VideoShowMeHow yep i ordered it straight from your links. Thanks so much for providing such good content too I've applied many of your mods to my dmax.
Hmm so weird. Able to try a different phone at all? Shouldn't make a difference but worth a shot?
How do you add auto temp to the main screen
I used the paid android version of Car Scanner
Adam, I went into my settings on Torque and I have no PID settings for the 2021 Dmax. Where do you get them from? I purchased both the Torque Pro and the OBD2 Aust device (from your link). Can you advise please mate?
Are you using the car scanner app? That's the one that has the auto temps
@@VideoShowMeHow Only the two above. Torque Pro. Is there another app I need?
Car Scanner is the app you need like in the vid. Had the trans temps built in
@@VideoShowMeHow Adam, is that where I get the PID codes from? OBD2 Aust won't help.
If you watch the video from 4:48 I show the 'Car Scanner' app, this has the trans temp PID etc all built in, you can just select like any other sensor and display how you want
This is the app I run now.
Why do you say that the OBD port is "literally" under the driver's seat? It is really "literally" under the dash.
Hello can I fit to a 80 series landcruser petrol
yep, pretty well exactly the same way, only issue is I think toyota only started moving to the obd2 standard from 1996, so pre that you may not have a port :( It will look the same, try the fuse box in foot well and engine bay to see if there's one there
its on google play store not Apple store, the one on apple is a scam and ask for subscription. just let your followers know and delete the apple link its incorrect , thanks Bro +
Thanks for the heads up, will check. There is a pro subscription though?
Cant get the ATF Temp to work for the life of me. 🤦🏻♂️
Are you using car scanner pro?
@@VideoShowMeHow yeah mate
@@norris75 add a new dashboard (if you haven't already), double tap to add new sensor, and the '[TCM] ATF temperature #1] is the one you're after
@@VideoShowMeHow yeah im using the dashboard that I created. I double tap and define my own gauges. The atf 1 or 2 will appear. But won’t record anything. It doesn’t even record on the live page.
@@norris75 hmm unsure about the record function, I just go into the 'dashboard' and set it up from there
Great Video - please remove the gloves!!!!
Only on special occasions 😁
@@VideoShowMeHow LOL Stay Safe
Hello. Do you know if there is an option to change/set up a clock time in the car? I removed the stock radio from my car and putted in a chines one, and i need to set up correct time now
Yep in the HUD menu
@@VideoShowMeHow Thank You🙂👍and what about service date? Can i delete/set a new one? And bleeding ABS pomp? I have a few cars and in every one i have something to do😄