Great info Chris! Thanks. Built my manometer and used 2-stroke oil for the fluid. Figured if it flowed into the engine it couldn't hurt anything. Keep smiling, wrenching and RIDING!
hey my brother..fantastic job and explanation. as a 60 year old south shore boy living in germany it was nice to watch the explanations in a more civilized accent. i'm the current owner of three machines in germany (BMWs 97 r1100gs, 2001 r1200c and a 2004 r1150 rockster) ond one yamaha fjr 1300 stateside. I sync my twins with vinyl tubing with at fluid, works fine but you convinced me with the boneyard syncer for my fjr as they sell the 4 cylinder model for just over a hundred and with the homemade thingy the process is simply too laborious, first set sync, second pair sync, then one of each and hope for the best. thanks for the wisdom from down east.
I wasn't looking for how to sync my bodies, I always figured I'd leave that to my highly respected BMW mechanic. But now I've got a Carbtune Pro on order from BeemerBoneyard and looking forward to tuning. I used to tune my R/100RS "on the fly" so I'm pretty confident, especially with this video I'll be dialing it in. My current R1100RT runs great now, but I figure since I'm in the middle of the clutch job (again, thanks, great video on that subject!) I will need to be seeing about my cables since they've probably gotten stretched a bit in the process of lifting the sub-frame.
I have a 99 RT 1100. I want to mount 2 large round & somewhat heavy PIAA lights on the bike, just as I see you did on this bike. Where do I get these brackets ? I don't want to drill into the tuberware. Thank you.
I'll be checking my throttle sych today. I have Twinmax and Carbtune. i plan on verifying the results on both. I first bought the Carbtune from Beamer Boneyard. Then I saw the Twinmax on a video. It looked cool so I had to have it as well. Chris, I would love it if you made a more detailed video about throttle bodies including when and how to rebuild them.
Choke (Fast idle) only pulling one side.. Pull the other one. On the original single wire models; yes. With the cable box; no. The choke cable pulls on a wedge which turns the wheel which both cables are connected to. That said, glad your back. :-D.
i have an 02 and i can get it to run without advancing the throttle position sensor (turning it counter clockwise) then it only idles and there are deadspots in the powerband its hard to keep it running.. help please
Hi Chris I'm an owner of a 11:50 and I see you synchronize the carbs using the throttle on top and the screw on the side and I'm going to synchronize mine but what is the difference between those screws and thank you for all the videos they are good.
l watched all the episodes of this series.... OMG.. you are rock and top man...!!..Thank you for sharing your precious knowledge and advice with us. BTW l have r1150 r rockster and l have a tips for the boxer riders too, l replace the primary stick coils with the classic ones. more stable and far from overheat . No more melted coils or open risk to the side crash . So l hope that you will keep adding your videos on you tube forever .cheers..:-)
I have a BMW R1150rt in blue, (basically this model shown in this video) my bike fell on its side one day and when I picked it back up my bike wouldn’t start anymore… I checked the engine starter and it was cracked where it rounds out so I replaced it.. my bike still won’t start… any ideas?? Thank you for these videos though, without these videos you provided I would have been fucked .
Things to check after dropping one of these: Fuel connection at the quick disconnects if fitted with such. Stick coils can fail from a drop - test for spark. Good luck to you, Chris
Great video as usual, Chris. I just finished up a valve adjust & tb sync on my 2000 RT this weekend. Bike is running great but now I have a ticking coming from what appears to be my right throttle body. Bike only has 54k miles and did not have the noise prior to the work performed this weekend. And thoughts??
Check your throttle shaft bushes on that side for excessive wear. You might even see the shaft moving and jumping around if it's really bad and it's that movement that causes the ticking sound. Hope that helps.
Good on ya cob. Just what I needed to see, seeing as I just replaced the throttle cable on my GS & its running like crap. Idles nice but open the tap & ... fuck ! Been thinking this might be the issue. Thanks heaps mate.
@@ChrisR.Harris Thanks. I thought so. I've gone through this thing. Spline lube new clutch. Flushed clutch and brake system. New injectors. Now it's running like "poo"😂 Idle problems. Twinmax says its synchronized anywhere above 2k rpms but idle is fuckin horrible. Left side 🤷♂️ . Air screw doesn't do shit. Cables are seated properly with good free play. I'm stumped 🤦♂️
I've got it running well. I think I had a bit of an air leak. Thanks for all your videos, Chris. Couldn't have done it without you. ;) Riding this thing from Richmond Va To the Pacific Ocean in the spring.
Well after adjusting valves and syncing throttle bodies for the 3rd time I could get it running right. I bought a GS911 and my TPS is fucked. Another $200. Fuckin BMW. 🤦♂️
Awesome work. I can imagine his joy of riding a well tuned oil head. Glad to see you posting Chris.
Thanks Sunny!
Great info Chris! Thanks. Built my manometer and used 2-stroke oil for the fluid. Figured if it flowed into the engine it couldn't hurt anything.
Keep smiling, wrenching and RIDING!
Good work, Kevin!
hey my brother..fantastic job and explanation. as a 60 year old south shore boy living in germany it was nice to watch the explanations in a more civilized accent. i'm the current owner of three machines in germany (BMWs 97 r1100gs, 2001 r1200c and a 2004 r1150 rockster) ond one yamaha fjr 1300 stateside. I sync my twins with vinyl tubing with at fluid, works fine but you convinced me with the boneyard syncer for my fjr as they sell the 4 cylinder model for just over a hundred and with the homemade thingy the process is simply too laborious, first set sync, second pair sync, then one of each and hope for the best. thanks for the wisdom from down east.
Thanks
I wasn't looking for how to sync my bodies, I always figured I'd leave that to my highly respected BMW mechanic. But now I've got a Carbtune Pro on order from BeemerBoneyard and looking forward to tuning. I used to tune my R/100RS "on the fly" so I'm pretty confident, especially with this video I'll be dialing it in. My current R1100RT runs great now, but I figure since I'm in the middle of the clutch job (again, thanks, great video on that subject!) I will need to be seeing about my cables since they've probably gotten stretched a bit in the process of lifting the sub-frame.
Nah, your cables are worn out from use; 25 000 miles at best. Good luck with your new carbtune ;)
I have a 99 RT 1100. I want to mount 2 large round & somewhat heavy PIAA lights on the bike, just as I see you did on this bike. Where do I get these brackets ? I don't want to drill into the tuberware. Thank you.
Good to see you back with a bike , take it easy and enjoy !
Thanks Paul, more soon.
I'll be checking my throttle sych today. I have Twinmax and Carbtune. i plan on verifying the results on both. I first bought the Carbtune from Beamer Boneyard. Then I saw the Twinmax on a video. It looked cool so I had to have it as well. Chris, I would love it if you made a more detailed video about throttle bodies including when and how to rebuild them.
Great to see you at work again, Chris. Most interesting and helpful. Many thanks.Hope all is well in Maine. Keep it up.
Hey, it's always up in Maine!
Choke (Fast idle) only pulling one side.. Pull the other one. On the original single wire models; yes. With the cable box; no. The choke cable pulls on a wedge which turns the wheel which both cables are connected to. That said, glad your back. :-D.
Pulls on a wedge that opens one side.
Hallo, sehr interessant ihre Arbeiten 👍
i have an 02 and i can get it to run without advancing the throttle position sensor (turning it counter clockwise) then it only idles and there are deadspots in the powerband its hard to keep it running.. help please
Priceless Chris good to see you will the tools again. Alex
Thanks Alex.
Thanks, Synchronisation done with a touch of humour.
Doh, it was supposed to be humor with a bit of work, damn it! ;) More soon, Stephen, more soon.
Hi Chris I'm an owner of a 11:50 and I see you synchronize the carbs using the throttle on top and the screw on the side and I'm going to synchronize mine but what is the difference between those screws and thank you for all the videos they are good.
Difference between which screws? You have a brass airscrew in each throttle body to set your idle. Set the cable freeplay and balance the cylinders.
Chris Harris thanks man
l watched all the episodes of this series.... OMG.. you are rock and top man...!!..Thank you for sharing your precious knowledge and advice with us. BTW l have r1150 r rockster and l have a tips for the boxer riders too, l replace the primary stick coils with the classic ones. more stable and far from overheat . No more melted coils or open risk to the side crash . So l hope that you will keep adding your videos on you tube forever .cheers..:-)
Yes, revert back to the old better way!! Good for you, take care, Chris
I have a BMW R1150rt in blue, (basically this model shown in this video) my bike fell on its side one day and when I picked it back up my bike wouldn’t start anymore… I checked the engine starter and it was cracked where it rounds out so I replaced it.. my bike still won’t start… any ideas??
Thank you for these videos though, without these videos you provided I would have been fucked .
Things to check after dropping one of these: Fuel connection at the quick disconnects if fitted with such. Stick coils can fail from a drop - test for spark. Good luck to you, Chris
Have you done a video on R1100 throttle cable replacement?
Excellent, thanks Chris
You're welcome Ray.
Like all your videos
Can’t find one on rear brakes change
On a r1150 Rf
Legendary!
Thank you!
Great to see you back at it! I'm about to do this on my R1100rs this weekend with my Twinmax. It would appear the Carbtune is a little more accurate?
It would appear so! Good luck Rodney.
Great video as usual, Chris. I just finished up a valve adjust & tb sync on my 2000 RT this weekend. Bike is running great but now I have a ticking coming from what appears to be my right throttle body. Bike only has 54k miles and did not have the noise prior to the work performed this weekend. And thoughts??
Check your throttle shaft bushes on that side for excessive wear. You might even see the shaft moving and jumping around if it's really bad and it's that movement that causes the ticking sound. Hope that helps.
Good on ya cob. Just what I needed to see, seeing as I just replaced the throttle cable on my GS & its running like crap. Idles nice but open the tap & ... fuck ! Been thinking this might be the issue. Thanks heaps mate.
SOunds like it. Good luck Stuart.
✌🏿😜 VAS-Y MON CHRIS
T'ES BON BON BON 💪😜
🏍 🏁 🏍️ 🏁 🏍️ 🏁 🏍️ 🏁 🏍️
Hey Chris.
When I'm doing this on my 02 R1150RS my RID shows 3 bars and the headers are freakin red hot.
Is that normal? Freaks me the fuck out.
No, that's not normal. Make sure there is free-play at each throttle body cable.
@@ChrisR.Harris Thanks. I thought so. I've gone through this thing. Spline lube new clutch. Flushed clutch and brake system. New injectors. Now it's running like "poo"😂
Idle problems. Twinmax says its synchronized anywhere above 2k rpms but idle is fuckin horrible. Left side 🤷♂️ . Air screw doesn't do shit. Cables are seated properly with good free play. I'm stumped 🤦♂️
I've got a GS911 coming so hopefully I can get some codes off of it. 🤷♂️Oh. I replaced the 02 sensor as well.
I've got it running well. I think I had a bit of an air leak. Thanks for all your videos, Chris. Couldn't have done it without you. ;)
Riding this thing from Richmond Va To the Pacific Ocean in the spring.
Well after adjusting valves and syncing throttle bodies for the 3rd time I could get it running right. I bought a GS911 and my TPS is fucked.
Another $200. Fuckin BMW. 🤦♂️
Cool video
Thanks Dick.
Thanks
Hi Zane!
Be nice if ALL mechanics were as cool to work with as you... good video thks
Thanks! You are invited to visit my Patreon page where my new material is posted.
www.patreon.com/user?u=25101320
You are the man! You should tattoo a big S on your chest.
No!