added to bios with the xeon mod, flashed. Clean installed windows 11 pro x64 Uefi mode video on uefi only enabled 4G decoding on asus strix x99. Xeon mod works perfect but rebar ant working with bios patch and running the rebar .exe @32 Running on x99 strix E5-2696 V3 , nvidia rtx 3060 ti. Any idea's? would be great
X99 QD4 Not working with resize bar with the -100mv patch for it, disabled CSM completely enabled 4g but not allowing resize in bios. Running 22H2 ghost spectre 10 windows
@@Miyconstwow what a niche, very cool! I’d love your opinion. I am considering upgrading a x99 sabertooth that worked very well since I built it 2015ish. The past year it’s had driver update issues. Recently nearly died, after driver wipe, gpu running but not well. The system ran 5k monitor, (which I thought died) graphics tablet & did lots of rendering, good life for gtx 980. The cpu is 5820k, overall system used as a editing/graphics workstation. In a funny spot, new gpu considering A5000 or 4090 more expensive than entire x99 pc. & I’m not Pixar. Anyway, what gpu/cpu would you suggest? With this cpu the 1080 ti looks promising and it appears some bios wizardry can help newer gpu cards? It would be kinda cool to get fancy Xeon in it too. Thank you & stay safe!
Maan I really do love your videos. I'm always looking forward to the next one. You are THE X99 authority on youtube and deserve many many more subscribers!
Just enabled mine on machinist x99 RS9 works flawlessly. running a rx 6600 8gb GPU and fully overclocked using your tool -70/50mv xeon 2640 v3 and is stable
It is amazing to see how x99 keeps on ticking. Intel must really hate these developments. It is crazy to think that one can now use an Intel desktop graphics card with an 8 year old CPU. Rebar was the only thing preventing that. I can't imagine how it would perform though. I would love to see some stats on that. These videos are really top notch. You always exceed my expectations. Keep up the good work! I can see your channel growing into something great one day. Your vids are amongst the few I watch all the way through.
Just tested with an a750 and went for a stuttery mess to a locked +60 fps at least on halo infinite, haven't tested much yet but this is absolutely amazing, a couple of things just in case someone finds the same issues, I had to do a MBR to GPT conversion to enable UEFI on my windows installation but other than this worked flawlessly. My system: Huananzhi x99 f8 with latest bios, turbo boost unlocked and this driver 2678v3 16gb 2133 MT/s Intel a750
This worked with my MACHINIST RS9 & RTX A2000 6GB! Time to benchmark with BF2042. E5-2640 V3 Turbo Unlocked (-50mv), 32GB Ram. Thank you for always giving us great info for the X99 platform!
It working very well here, Xeon E5 2666 V3 Unlocked + X99-F8 + RX 6600M 8 GB + 64 GB DDR4 2133 MHz (quad channel) I've gained 5~10% FPS in Ghost Recon Wildlands, playing at 1440p Ultra settings at 60 FPS and the best off all, LAG SPIKES HAS STOPPED AT ALL! I had a lot of problems with Lag Spikes in many games and ReBAR solved it. BUT..... Nothing is perfect... I'm Hackintosh user (i work with video editing, Adobe, Davinci Resolve, etc...), i have two separate SSDs for each system (Asgard AN3 NVMe 512 GB each), and Windows 11 worked very fine, but, Hackintosh cannot initialize with Above 4G Decoding habilited and I need to disable whenever I'm going to use macOS. If u are Windows user and wanna improve your performance and stop lag spikes, i will recommend ReBAR for you!
Interesting findings, overall is safe to comment there is no consistent effort in all hw and sw platforms to achieve such feature. I also wonder what is the degree of maturity of each of these.
@Muesolito Macos only support up to 512mb of rebar from the Apple side, if you set the value of rebar to 2^8 Or Just 8, it Will boot with and without 4g enabled.
Yah! Thanks for the very useful information. I immediately incorporated this DXE driver into the BIOS of my X99-G7. (It used to work with the X99-8M-F mod BIOS provided by Mi899 Tool. My X99-G7 uses the C226 chipset. Thanks again !!!) This DXE driver seems to work very well. My machine has an RX580, so I don't expect a very high performance gain, but I did see a clearly frame rate increase in some games. I was also surprised to see a clearly performance boost in Unigine's Heaven/Valley graphics benchmark. With the price of graphics cards coming down, I am planning to replace mine with a better one. I think this trick will help me then as well.
@@brianwong6562 I think it’s under the PCIE options but not sure. I am not around my pc at the moment as I am travelling. It’s definitly in there though the bios on that mainboard can be confusing. Also note that for me it was stock in CSM mode and I had to disable that I believe.
@@BertM3 Still didn't see it. Maybe my bios is just too old. Purchased Mobo on 2020 April, might need to get latest bios through Mi899. Thank you for the reply and Happy Holidays.
Very interesting and as usual...a clear, concise, and professional delivery by Miyconst! Not sure I am ready to do this one...mostly because I have the GTX 1080Ti and it likely will not be a significant benefit for my particular use-case. Secondly, not sure I have settled on the optimal voltage offset / optimal (Mi899 implemented) BIOS with E5-2696v3 + X99TF (v1). Currently running the TU PEI -50/50 BIOS with stability. Might go lower...not sure yet. Also installed THROTTLESTOP (v.8.7) and am playing with this at the moment, setting mult limit to 38x and observing max number of cores getting to this max multiplier (14~15). So far, this program looks to be delivering some good results. Temps are SAT too.
@@totembarada6900 я тоже тестировал, но повышения фпс на видеокарте rx 580 2048sp вообще не заметил, а еще перед загрузкой все время появляется экран с миллионами цветных точек из-за отключения SCM (или как он там назывался), поэтому решил вернуть все обратно)
I just recently heard that certain workstation cards required this years before anyone thought of using it for gaming, and was curious if that meant it would work with modern gaming cards. Very cool you just made a video on it.
Hello, that rebar mod works in an x79 platform with the motherboard machinist x79 v2.09 (the only x79 in your program) and can drive an Intel arc a770 to score 12500-13100 in 3dmark, with a xeon 2650 v2
Hi I have Atermiter x79 mainboard and rx 6600xt gpu. And it has option to enable 4g decoding. I did and after reboot there was no display. I reset bios through cmos reset. But there was no display. I changed gpu everything ok exept my rx 6600xt. I tried to check my RX6600XT on othere working system it doesnt give display anymore. Please advice.
Vou esperar a galera fazer em suas próprias mainboards antes de eu fazer na minha, uso meu computador pra trabalho e não tenho regravador de BIOS! hahaha Xeon E5 2666 V3 + X99-F8 + RX 6600M
ATT: Fiz aqui e funcionou perfeitamente! Muito fácil de fazer, ganhei pouco FPS mas ganhei MUITA estabilidade, e estou conseguindo rodar o Ghost Recon Wildlands a mais de 60 FPS em 1440p no Ultra, coisa que estava atingindo patamar abaixo de 60 e com stutterings, recomendo MUITO!
Hello Miyconst, I recently purchased the Qiyida E5-A99 motherboard and I'm using it with a 2680v4 without any issues. However, I would like to unlock the memory timings and activate SAM (I'll also set it up with UTB in case I decide to test it with a v3 CPU). I found the procedures to modify UTB and SAM on your channel and on the Russian website xeon-e5450. However, I couldn't find the procedure to unlock the memory timings (and I'm hesitant to use BIOS from other brands on this motherboard). Could you guide me on how to do this? (As mentioned, I'd like to perform the procedures based on the original dump of my motherboard, if possible).
Hey man, I remember you had a friend that made custom bios for some of the chinese motherboards and I was just thinking maybe it's possible to add an old ASRock hack in x99 motherboards? Back in 2015-2016 ASRock launched a feature called Sky oc that allowed to overclock non k intel chips ( 6th generation- z170 chipset I think ) and it worked changing the base multiplier but then intel changed microcode on the non k processors and ASRock stopped trying to use it. I don't think that the xeon v3 series had a microcode change, but the v4 might even also not be affected because of launch dates mostly. Perhaps this can be custom made for xeon? You are the x99 scientist after all haha
the truth is that it surprises me! a good low cost v3 system with polaris/vega/rdna/ graphics cards and their drivers modified by the community capable of enabling SAM on these cards, you could build a good pc!
As always very informative and helpefull. I ignored your warnings and bricked my motherboard, now i just bought ch341a to fix it. That's a one way to learn new stuff. ;)
It's hard to say why. Try to run the tool as admin, check if it's disabled for other DXE entries or only for the last one. What motherboard is it and how did you obtain the BIOS?
@Miyconst I also see that option grayed out with the UEFITool_NE_A61 and A62 version from the linked repo, with an older version that came with the original x99 ffs modification I could insert it but AfuEFI won't recognize the file when I tried to flash it. This was with the CX99DE26 from iBiosEngineer for the Huananzhi X99 TF. Edit: The insertion at least works with 0.28.
Got it to work, you need UEFITool 0.28 though, the other issue was that AfuEFI expected the BIOS files from a ../bios directory. Many thanks for providing this feature, miyconst!
Report: Worked perfectly on modded BIOS for Machinist MR9A PRO V2(B85 chipset), Xeon 2666v3 and JieShuo RX 580(using modded drivers to allow REBAR) hahaha somehow all this worked, subscribed!
If I perform the unlock turbo boost with DXE driver, did I inject the ReBar DXE driver after the unlock turbo boost one? Thank you and congratulations for the wonderful job.
Hey Miyconst, I hope you can help me understand what's going on with my 2666v3 please. I bought an x99 kit from Ali with a k9 and the 2666v3, which came from the store with turbo boost unlocked. In both HWMonitor and AIDA64, the power consumption is shown only "package" and never exceeds 16W at full stress. My hypothesis is that the sensors are misconfigured and that 16W that I see as a "package", is actually the consumption of one of the 10 physical cores, totaling 160W. And the VID Max during the stress test is 0.990V, but in iddle it reaches 1.059V. What do you think? Thank you for your excellent work!
The power consumption sensor is simply broken and there is no logic behind this value. If you want to know the actual power consumption - use an external wattmeter.
I had the same issue and HWMonitor will show incorrect info, just a few watts for cpu usage but using HWinfo showed the correct values and wattage. I tested via an external power meter and compared it to hwinfo information. Also compared to TDP levels min and max
Hello Miyconst. I recently purchased the 2024 version of the Huananzhi X99 QD4 motherboard that came with a E5 2666 V3 CPU, the one with 3 NVME slots. Is this motherboard considered LGA 2011-3 and will resizable bar work with it? Thanks.
Greetings, I can confirm that it's working on my asus x99-m ws. Injected the driver manually with uefitools on the original cap file from the asus site. Also needed to apply uefipatches othervise I could not activate rbar, took me a couple tries but finally rbar is working with xeon e5 2699v4 an intel ark 750. For all asus users, only usb flashback works with the modified file easiely. Thanks for your guide and greetings from germany.
Tried this on my Asus X99 Deluxe II. Downloaded the cap file from asus website. Injected the driver with uefitools on the original cap but when I attempt to flash the modded cap the flash utility says "Selected file is not a proper BIOS!" The unmodified cap will install just fine. Somehow the flash tool is seeing that the cap was modded and refusing to flash it. Any ideas on how to get around this?
@@otumseh4256 Asus refuses to flash modified BIOS, they have a security check for that, you need to either try to hack it with AfuWin or use an external flash programmer.
@@Miyconst I appreciate your response and suggestion. With it I was able to successfully install the modified bios by using AfuWin64 on a ROM that had its header removed and after applying UEFIPatches. Arc A770 is now working like it should. Thanks!
You are a star, thank you for the video and the Mi899 tool.. I used AfuWin to dump & flash my "Asrock x99m Fatal1ty", script/tool froze during first attempt at "Erasing NVRAM Block" but luckily MB has dual bios chips, quick recovery flash and then it worked perfectly second try. Using a E5-2695 v3, 64GB ECC with an RTX4090 on an Asrock x99m Fatal1ty, Bios P3.30, with 'Unlocked Turbo all cores' & now 'Resizeable BAR'. I can upload/send my bios if anybody wants it.
I also have a computer with a HUANANZHI X99-TF-Q motherboard. With a graphics card MSI GeForce GTX 1660 Gaming X 6Gb Resizable BAR worked fine. I changed the graphics card to Asus Dual GeForce RTX 3060 Ti V2 Mini OC 8GB GDDR6 and the card only starts in Legacy mode. In UEFI mode the computer does not start, and because of that I cannot turn on Resizable BAR mode!!!!
@@KRIS5112-ABC I enabled rebar with RTX 3060 12gb and it showed that it’s working. So maybe you did something wrong? I’m still waiting for my Intel Arc a750 gpu which will arrive in 2 weeks.
Hi, I'm from Brazil and your videos are really helpful around here. I wanted to ask for your help in my situation: I have a Kllisre X99 V201 with the C612 chipset. All the information I could find about this board says that it is compatible with the X99 8M-F BIOS, but the 8M-F uses the B85 or C226 chipset. Which BIOS can I use in this case? Maybe the X99 8M (non F)? Thank you very much in advance and I hope you continue with your excellent work!
I have never had a V201 with C612 chipset, but I can say for sure that B85 BIOS won't work on your motherboard. X99-8M BIOS might work, but not likely. If you don't have a programmer, I wouldn't risk trying it.
@@Miyconst yeah, it's really strange. In AIDA 64 it shows "Intel Wolfsburg C612", the stability test doesn't freeze and the sleep state works fine, so it's not a B85/H81 for sure. I bought it in late 2020, so maybe they still used better chipsets on these boards back then. However it doesn't have above 4G decoding on BIOS, do you think I can enable it somehow? Also if you want more information about this board so you can update it in your software and channel I can send it to you
@@rodrigovhn5479 most likely your Above 4G Decoding option is simply hidden in the BIOS. Create a BIOS dump and then open it with Amibcp tool, explore the BIOS settings and see if you can find Above 4G Decoding. If yes - set visibility to User then save and flash the modded BIOS. Remember to always keep a copy of the original BIOS and a CH341A by your hand.
You're enabling resizable bar, not overclocking. This may improve performance of your GPU but isn't in itself overclocking. If your motherboard has an overclock section and you can't find it, the chances are that you are in so called Ezmode and you need to be in Advanced Mode. Select Advanced Mode and then look for the overclocking section. Be very careful. Since you don't know that much yet about the BIOS and options there, do things one step at a time, in very small steps. I would recommend not trying to add resizable bar support until you are more comfortable with the functions and options in your BIOS.
@@ZenAndPsychedelicHealingCenter My Reasoning was, if we can add that in the bios, maybe we can also add more things.. overclocking, memory parameters, etc... I already added ReBAR. Works great.
An update of me here: i've managed to increase the bar from my rx570 from 256mb to 1gb on my plex hd(x79 turbo) motherboard but only without 4g decoding, anything more than 1gb and the computer won't post only with reflashing the bios to solve on that particular motherboard. My p9x79 by the other hand i've managed to put 256mb on my rtx2060 that was only 128mb, but it seems that this gpu's bios doesn't permit the gpu to go over 256mb! So actually i am quite happy with the results, and i hope this information could be relevant for you and your channel.
@@gui.giuliano2k21 Eu consegui com o rebarstate, ele ativou 256mb mas eu não vi diferença de desempenho, o resizable bar segue desativado, mas ainda assim a barra aumentou para 256mb, tem que cuidar pois o Pc pode não iniciar se mexer errado nisso aí, tem que pôr no máximo 256mb no rebarstate, e não mexe nas outras coisas.
Question from MIYCONST. I have a computer: with a HUANANZHI X99-TF-Q motherboard, 4 DDR 4 RAM modules, and an Intel Xeon E5 2696 V3 processor. The computer also included a graphics card MSI GeForce GTX 1660 Gaming X 6Gb and a 512 Gb NVMe drive. I recently bought a new Asus Dual GeForce RTX 3060 Ti V2 Mini OC 8GB GDDR6 graphics card and I started having problems starting the computer. The board display shows the message "d4" and 8 beeps from the speaker on the board. Then the message "A6" is displayed and nothing happens and the monitor screen has not displayed an image since turning on the computer. Only after enabling the CSM function in the board's BIOS and in it "Video" to "Legacy" instead of "UEFI" did the graphics card start displaying an image and the computer starts properly but the PCI-Express Resizable BAR does not work. Can this problem be solved? Regards.
Jay, is your motherboard that one with 4 RAM slots with 2 being orange and 2 being black ones? im waiting for my x99 atermiter to arrive,i couldnt find yours to compare
Ainda tem a necessidade de sempre desativar para poder tirar a bateria da BIOS? Ou corrigiram isso? Estou pensando em fazer ba minha 8 mf com rx6600 porem se ticer q necessidade de sempre desativar, nsl irei fazer, poderia testar?
Hi, thank you for your effort on making this video. I'm currently on Gigabyte X99-Gaming G1 with E3 1660v2, I followed the instruction and inserted the ReBarDxe.ffs and flash the Bios. Everything works fine, I even verify that the installed bios has the new dxe driver. However I cannot find the option in the bios to enable above 4g. Could you please help me shed some light as what I may did wrong?
Hello, I have a question please, are the VRMs of atermiter x99 d4 enough for the e5 2670 v3 or at least will it work good with r5 2620 v3? If not what is the best budget x99 now?
Hi there. I can suggest you these two videos that should answer all your questions: ua-cam.com/video/7Pyef_ySHwo/v-deo.html and this one ua-cam.com/video/AW0QgQNbBwA/v-deo.html
@@Miyconst Thank you very much Can you just please tell me what do you think about the e5 2667 v4 QS it has 3.6ghz boost clock and 8c and its only for about 56€ is it good or will an r5 2643 v4 or e5 2678 v3 or 2666 v3 be better?
ASUS X99-DELUXE II + Saphire RX 5700 XT Nitro+ SE (410/Samsung) Is it possible to add? Resizable BAR. If possible, explain step by step. Tried to take ready from your link, refusal, "The file is not compatible". I tried installing the utility in the middle of the bios and from a 32GB fat 32 USB drive.Thank you.
I have a Huananzhi X99-P4 , this is not in the list. Which one can I pick alternatively? It has an Intel H81 chipset I found, there's one mobo in the list called 'Kllisre X99 V201' with H81
How can i flash my bios if my motherboard is a GIGABYTE Z170N-WIFI ? I did all the steps but when i save the file i have a .rom file. My motherboard has a Z17NWIFI.20i file. If i try to add the ReBarDxe.ffs driver in the Z17NWIFI.20i file, it won't work since when i try to update it in the bios it says "invalid bios image". I tried saving it with the same name and it didn't work. It seems like my motherboard doesn't take files with .rom at the end ? Or do i need another program to be able to flash the bios ? Edit: The file can be edited and it does work to be saved, i just can't flash the bios with the saved file that contains the ReBardDxe.ffs , it tells me "invalid bios image" when i click on it.
I'm using rx 6500 xt, xeon e5-2640 v3 (not on turbo), 16 gb ram and a atermiter x99 motherboard. After doing everything like in a video it shows in gpu z that resizable bar is still disabled. I tried to update vbios but it said i have the newest version.
I am currently trying to insert a file in UEFITool but it is not letting me do so anywhere. I have the same motherboard as in this video, used the same Mi899 tool but am now stuck. What could be the issue?
Very interesting. Oh though concerning the Intel Arc series, the software dashboard doesn't play nicely with systems below 11th gen. I try this on my 9900KS it wouldn't open unless I had 11th gen or above.
@@Miyconst it still ran Cyberpunk and Skyrim. I just have no control over the card. I do have an 11th Gen intel cpu I look forward to testing it there.
@@Miyconst It works! Definitely had a modest performance boost on my 6850K / 7900 XT rig. Thanks for taking the time to make this tutorial, i really appreciate it!
not help, my x99 board have rebar on it, but gpu-z say Resizable BAR enabled in BIOS - No and CSM disabled - No. but I did everything as it was in the video. dislike
Any idea if the Qiyida V205 motherboard has A4GD to affect this mod? I'm looking at getting an A770 for my Linux daily driver (ole 580 died, RIP), but I need to know if I can turn on ReBar first
Interesting. It looks like adding a nvme driver into uefi bios. So LGA1155 ivy bridge might be benefited from the re-bar. Also thanks for supporting Ukraine !
hi! i'm done the turbobust unlock mod on the d8 motherboard like you explain in your another video, but now i can't find anymore the "above 4g" in the bios. do you know were is? or can you suggest another bios with the "above 4g" in the option?
Ok i find out what you mean, I've already done all the bios modification and now I've all core turbo bust e resizable bar enabled thanks you very for your help and for the amazing guide you made!
Just tried this with a X99-TF Gaming (C612), E5-2678v3, 32GB Corsair DDR4 3200 memory, and a Radeon Pro W5700. I used the latest "TV30.bin" bios from Huananzhi and modified it to use the turbo unlock (left C6 enabled), performed "rebar" on that modified bios (inserted after my V3 line) and it all worked perfectly. Still testing uplift in games however. I wonder if anyone knows how to get the Corsair memory RBG function to work with the ICUE software. On the TF, Icue sees memory but does not list any way to control the RBG settings. Tired of the rainbow!!! 😁 Thanks again!!!
Can you send me your bios? I have the same card as you did in the video but the gpuz says you need to activate it in the bios I have the 4g decode activated already
@@vinisampaio4254 Bios flashing is a tricky business. Hopefully you will have the same success I have had following the steps outline by Miyconst. I have uploaded a folder and files required to duplicate my process. Good luck. drive.google.com/drive/folders/10___M5UbA9owTx5Xn7uI995I7COMhaZS?usp=share_link
@@Miyconst I am not trying to control the Ram's RBG with the board. I am trying to use Corsairs ICUE software to control the ram installed on the board. The software does see my keyboard and mouse and allows for control of the RBG. But.... It does give me any option to control the RAM although it clearly lists information for it. I have heard that there's an option called "speed write" when enabled helps from forums, but I do not see any option for that in the bios. I guess I am out of luck. I also posted the bios I modified to google for those who wish to follow my setup. Cheers.
Hi, im new to bios modding but is there an easy way to force flash this onto an Asus X99-WS USB 3.1? I modded the bios as shown in the video, but when i try to reflash using asus ez flash it says its not a valid file
Hi. I have 5960x cpu with Asus rampage v edition 10 motherboard. Is there any way I can apply resizable bar on my mobo as chinese mobos with 0 issue? Thanks.
@@Miyconst Ok. But not sure why I could not find 4G decoding in the bios Advanced tab. I have no PCI Subsystem category also. Hence, I will try to flash the bios using your -70/50mV bios ROM. However, I am not sure which one to use, the V3 Payne or the S3Turbo V0.2 for my X99 F8 which was purchased in 2020. I wish to have your kind advice, thank you.
the x99 mainboard encountered a pretty big problem. It was taking too long to post ram! the code on the main says code 79 takes about 12 seconds for it to recognize that there are 2 sticks of ram plugged in it would be better to ignore
i have injected on the last line of DXE drivers the TU drivers to undervolt the cpu and this line to enable REBAR must be in last line or before the undervolt line ? i did on before the undevolt line and when i go on windows to install gives me an error saying its not enble on UEFI bios
Im trying it now with the dual socket F8D. But the regions on UEFITool is not showing so I dont know where to insert the rebar ffs file. Really liked your detailed review of the F8D. Im planning to get the F8D Plus withe 3 pcie x16 and 3 pcie x8
@@Miyconst it was there all along lol, guys in discord help me. Now, however I dont get any display when I change bios Video Settings for CSM to "UEFI", OS works just no display, can even access bios again to change it bak to legaccy
buddy, it turned out, but everything in the bios became enlarged healthy X 99-TF 1.1 bios from Koshak 25.05.2020 v11 The Huananzi logo has also become healthy after returning the settings, he refused to start at all, only the battery had to be thrown off.
This worked on MSI X99a Pro carbon gaming and 6700k. And since I used a dump all my bios settings remained. If you would like me to send you the latest one from msi with resizable bar (not a dump) I gotchu.
@@danielkumm5288 thank for your replying I tried to find this video so I could leave a second comment. Doing this ended up breaking my computers ability to handle a bios, so all the settings I had were there in “lock” when I would turn on the computer it would go straight to windows no way of getting to bios. I had to trick the computer into re-flashing it was this entire thing freaking awful.
@@Miyconst Thank you! My x99 mobo is on it's way i will try to set it up with both. Last question, where might i find your discord channel? I'd like to join if possible!
I am going to do this on t5810 using CH341A for read and write bios, are they any extra steps I need to take for this workstation? or just extract bios from capsule and modify it using tool then write it using flasher.
❗UEFITool must be non-NE version - link in the video description updated.
added to bios with the xeon mod, flashed. Clean installed windows 11 pro x64 Uefi mode video on uefi only enabled 4G decoding on asus strix x99. Xeon mod works perfect but rebar ant working with bios patch and running the rebar .exe @32 Running on x99 strix E5-2696 V3 , nvidia rtx 3060 ti. Any idea's? would be great
@@superslotheroes7649 it's hard to say what's wrong, but you can join my Discord and ask for some help from the ReBarDxe author.
X99 QD4 Not working with resize bar with the -100mv patch for it, disabled CSM completely enabled 4g but not allowing resize in bios. Running 22H2 ghost spectre 10 windows
@@Miyconstwow what a niche, very cool! I’d love your opinion. I am considering upgrading a x99 sabertooth that worked very well since I built it 2015ish. The past year it’s had driver update issues. Recently nearly died, after driver wipe, gpu running but not well.
The system ran 5k monitor, (which I thought died) graphics tablet & did lots of rendering, good life for gtx 980. The cpu is 5820k, overall system used as a editing/graphics workstation. In a funny spot, new gpu considering A5000 or 4090 more expensive than entire x99 pc. & I’m not Pixar.
Anyway, what gpu/cpu would you suggest? With this cpu the 1080 ti looks promising and it appears some bios wizardry can help newer gpu cards? It would be kinda cool to get fancy Xeon in it too.
Thank you & stay safe!
@@superslotheroes7649 hi! i have the same problem! did you solve it ?
The X99 community never stops surprising me !
Just did that on Z97-P
Maan I really do love your videos. I'm always looking forward to the next one. You are THE X99 authority on youtube and deserve many many more subscribers!
I appreciate that!
Just enabled mine on machinist x99 RS9 works flawlessly. running a rx 6600 8gb GPU and fully overclocked using your tool -70/50mv xeon 2640 v3 and is stable
Awesome! Now you can enjoy some extra free frames.
i have the exact same specs as you, gonna try this today
It is amazing to see how x99 keeps on ticking. Intel must really hate these developments. It is crazy to think that one can now use an Intel desktop graphics card with an 8 year old CPU. Rebar was the only thing preventing that. I can't imagine how it would perform though. I would love to see some stats on that. These videos are really top notch. You always exceed my expectations. Keep up the good work! I can see your channel growing into something great one day. Your vids are amongst the few I watch all the way through.
Thank you for the support, if I get enough spare money, I will buy an Intel A750 to test with Xeons, but can't guarantee that.
Just tested with an a750 and went for a stuttery mess to a locked +60 fps at least on halo infinite, haven't tested much yet but this is absolutely amazing, a couple of things just in case someone finds the same issues, I had to do a MBR to GPT conversion to enable UEFI on my windows installation but other than this worked flawlessly.
My system:
Huananzhi x99 f8 with latest bios, turbo boost unlocked and this driver
2678v3
16gb 2133 MT/s
Intel a750
This worked with my MACHINIST RS9 & RTX A2000 6GB! Time to benchmark with BF2042. E5-2640 V3 Turbo Unlocked (-50mv), 32GB Ram. Thank you for always giving us great info for the X99 platform!
Is the performance difference huge with the A2000? I'm looking at quite literally the same setup..
Thank you Konstantin , you are the reason of my being x99 user . I'm not willing to give up x99 platform.
Hangi işlemciyi kullanıyorsun?
DITTO!
It working very well here, Xeon E5 2666 V3 Unlocked + X99-F8 + RX 6600M 8 GB + 64 GB DDR4 2133 MHz (quad channel)
I've gained 5~10% FPS in Ghost Recon Wildlands, playing at 1440p Ultra settings at 60 FPS and the best off all, LAG SPIKES HAS STOPPED AT ALL! I had a lot of problems with Lag Spikes in many games and ReBAR solved it.
BUT..... Nothing is perfect...
I'm Hackintosh user (i work with video editing, Adobe, Davinci Resolve, etc...), i have two separate SSDs for each system (Asgard AN3 NVMe 512 GB each), and Windows 11 worked very fine, but, Hackintosh cannot initialize with Above 4G Decoding habilited and I need to disable whenever I'm going to use macOS.
If u are Windows user and wanna improve your performance and stop lag spikes, i will recommend ReBAR for you!
Interesting findings, overall is safe to comment there is no consistent effort in all hw and sw platforms to achieve such feature. I also wonder what is the degree of maturity of each of these.
Did you have the above 4g decoding available in your BIOS before the injection? The setting is nowhere to be found with premoded F8 BIOS from miyconst
Will it work on latest official AMD driver? I am using RX6600XT.
Thanks
@Muesolito Macos only support up to 512mb of rebar from the Apple side, if you set the value of rebar to 2^8
Or Just 8, it Will boot with and without 4g enabled.
Yah! Thanks for the very useful information.
I immediately incorporated this DXE driver into the BIOS of my X99-G7.
(It used to work with the X99-8M-F mod BIOS provided by Mi899 Tool. My X99-G7 uses the C226 chipset. Thanks again !!!)
This DXE driver seems to work very well.
My machine has an RX580, so I don't expect a very high performance gain, but I did see a clearly frame rate increase in some games.
I was also surprised to see a clearly performance boost in Unigine's Heaven/Valley graphics benchmark.
With the price of graphics cards coming down, I am planning to replace mine with a better one. I think this trick will help me then as well.
Great tutorial. I used it on my Huananzhi F8 and it works flawless, I ran the CoD MW2 benchmark and I saw a few percent improvement with RX6700XT.
awesome ty, I was looking to see someone with an F8 post it worked well, time to try it out myself.
I did not see the above 4g decoding in my F8 bios, not sure why....where did you find it? Thanks
@@brianwong6562 I think it’s under the PCIE options but not sure. I am not around my pc at the moment as I am travelling. It’s definitly in there though the bios on that mainboard can be confusing. Also note that for me it was stock in CSM mode and I had to disable that I believe.
@@BertM3 Still didn't see it. Maybe my bios is just too old. Purchased Mobo on 2020 April, might need to get latest bios through Mi899. Thank you for the reply and Happy Holidays.
You never cease to surprise me. Love everything you do
Very interesting and as usual...a clear, concise, and professional delivery by Miyconst! Not sure I am ready to do this one...mostly because I have the GTX 1080Ti and it likely will not be a significant benefit for my particular use-case. Secondly, not sure I have settled on the optimal voltage offset / optimal (Mi899 implemented) BIOS with E5-2696v3 + X99TF (v1). Currently running the TU PEI -50/50 BIOS with stability. Might go lower...not sure yet. Also installed THROTTLESTOP (v.8.7) and am playing with this at the moment, setting mult limit to 38x and observing max number of cores getting to this max multiplier (14~15). So far, this program looks to be delivering some good results. Temps are SAT too.
Я выражаю чрезваычайную благодарность за проделанную работу, огромное спасибо вам! Проверю на своём 2666v3!
Как прошла проверка? Стоит это делать?
@@khanlar.8323 нет. В файлах хохловирус. Комп превратился в желтосинюю свинью и начал хрюкать
@@Человек-м1н8д неожиданно как, теперь точно иду делать это!
@@khanlar.8323 Я потестил всё работает, единственное с включённым ребаром тест видеопамяти не пройдёт если что не знаю с чем это связано.
@@totembarada6900 я тоже тестировал, но повышения фпс на видеокарте rx 580 2048sp вообще не заметил, а еще перед загрузкой все время появляется экран с миллионами цветных точек из-за отключения SCM (или как он там назывался), поэтому решил вернуть все обратно)
Great vid, this is only for gpu performance right? If its a work station that wont use any grafic computing, this isnt needed right?
That is correct, it's only for GPU performance in gaming.
Great video as always!, worked great on Huananzhi x99 BD4 alongside an rx 5700 xt and xeon 2666v3 cpu.
Perfect! Worked on my old MSI x99a Raider. Solved my issues with A380 and new drivers that requiers rebar. Tyvm!😊
Thanks, your tool didn't have my old x79-ZD3 but this worked well. ❤
I just recently heard that certain workstation cards required this years before anyone thought of using it for gaming, and was curious if that meant it would work with modern gaming cards. Very cool you just made a video on it.
I did what you said with a jingsha-x99m-g2 motherboard. It works! Thank you very much!
Damm it was a flawless process. rebar is on now thx a lot
Hello, that rebar mod works in an x79 platform with the motherboard machinist x79 v2.09 (the only x79 in your program) and can drive an Intel arc a770 to score 12500-13100 in 3dmark, with a xeon 2650 v2
Is this a question or a statement?
@@Miyconst statement, in your discord I post some images about it, sorry for bad redaction x.x
@@zatkiel311 thank you for the update then, hopefully it will help other X79 users.
можно ссылку на статью?@@zatkiel311
Just got my first X99 motherboard, a Machinist brand...I definitely noticed that 4G setting but had no clue what it was. Gonna give this a shot.
Hi
I have Atermiter x79 mainboard and rx 6600xt gpu. And it has option to enable 4g decoding. I did and after reboot there was no display.
I reset bios through cmos reset. But there was no display.
I changed gpu everything ok exept my rx 6600xt.
I tried to check my RX6600XT on othere working system it doesnt give display anymore.
Please advice.
Vou esperar a galera fazer em suas próprias mainboards antes de eu fazer na minha, uso meu computador pra trabalho e não tenho regravador de BIOS! hahaha
Xeon E5 2666 V3 + X99-F8 + RX 6600M
Fala meu brother!
Já estou querendo testar em minha Motherboard essa técnica do Resizable Bar.
Eu tb tenho essa mesma config. Queria ver se dá pra fazer...
ATT: Fiz aqui e funcionou perfeitamente! Muito fácil de fazer, ganhei pouco FPS mas ganhei MUITA estabilidade, e estou conseguindo rodar o Ghost Recon Wildlands a mais de 60 FPS em 1440p no Ultra, coisa que estava atingindo patamar abaixo de 60 e com stutterings, recomendo MUITO!
@@Moesuito show irmão. Vou fazer tb. Vi no canal do Mario Mazzotti, ele ensina direitinho tb. Muito bom!
Fiz certinho e brickou minha bios, no último processo habilitando no Windows. Quando reiniciei, pá!
This worked for me. Jyginue X79, Xeon 2690 v2, Intel Arc A770.
Thank you for the confirmation that it works with Intel Arc GPUs.
So your seeing the expected FPS and performance out of the A770 now? I know it suffers greatly without rebar.
@@ibbobud I was using this in my server which runs Linux. I was using the card for things other than gaming.
Hello Miyconst, I recently purchased the Qiyida E5-A99 motherboard and I'm using it with a 2680v4 without any issues. However, I would like to unlock the memory timings and activate SAM (I'll also set it up with UTB in case I decide to test it with a v3 CPU). I found the procedures to modify UTB and SAM on your channel and on the Russian website xeon-e5450. However, I couldn't find the procedure to unlock the memory timings (and I'm hesitant to use BIOS from other brands on this motherboard). Could you guide me on how to do this? (As mentioned, I'd like to perform the procedures based on the original dump of my motherboard, if possible).
Hey man, I remember you had a friend that made custom bios for some of the chinese motherboards and I was just thinking maybe it's possible to add an old ASRock hack in x99 motherboards? Back in 2015-2016 ASRock launched a feature called Sky oc that allowed to overclock non k intel chips ( 6th generation- z170 chipset I think ) and it worked changing the base multiplier but then intel changed microcode on the non k processors and ASRock stopped trying to use it. I don't think that the xeon v3 series had a microcode change, but the v4 might even also not be affected because of launch dates mostly. Perhaps this can be custom made for xeon? You are the x99 scientist after all haha
Maybe it's possible, maybe it's not possible. My friend lost his laboratory and had to run because of ruzzian invasion.
the truth is that it surprises me! a good low cost v3 system with polaris/vega/rdna/ graphics cards and their drivers modified by the community capable of enabling SAM on these cards, you could build a good pc!
Successfully done with Jinsha X99 Dual F2 BQ31 v1.1. Corrected the stuttering, easy with uefi mod and FTPW flash. Impressionant ! ✌🏾
Works on X99-F8 with RTX3070FE
Works on X99-QD4 with RX6700Pulse
Many thanks !!!!!
Thanks! I have a QD4 too
Gtx 1060 can be Support for resizeble bar? Thanks for keeping x99 alive!
As always very informative and helpefull.
I ignored your warnings and bricked my motherboard, now i just bought ch341a to fix it. That's a one way to learn new stuff. ;)
It's hard to say why. Try to run the tool as admin, check if it's disabled for other DXE entries or only for the last one. What motherboard is it and how did you obtain the BIOS?
@Miyconst I also see that option grayed out with the UEFITool_NE_A61 and A62 version from the linked repo, with an older version that came with the original x99 ffs modification I could insert it but AfuEFI won't recognize the file when I tried to flash it. This was with the CX99DE26 from iBiosEngineer for the Huananzhi X99 TF. Edit: The insertion at least works with 0.28.
Got it to work, you need UEFITool 0.28 though, the other issue was that AfuEFI expected the BIOS files from a ../bios directory. Many thanks for providing this feature, miyconst!
Report: Worked perfectly on modded BIOS for Machinist MR9A PRO V2(B85 chipset), Xeon 2666v3 and JieShuo RX 580(using modded drivers to allow REBAR) hahaha somehow all this worked, subscribed!
Welcome, and thanks for the update!
Tnks a lot. Few hours of work and I have a new bios with turbo boost unlock and bar. Amazing!!
Thank you so much! It worked perfectly
Obrigado! Obrigado! Obrigado!👏👏👏
what the heck, i got 145 fps from 60fps in some games..you are amazing mate. Appreciate your research.
Could you please share your PC specs? 60 to 145 FPS jump sounds rather unbelievable. 😀
If I perform the unlock turbo boost with DXE driver, did I inject the ReBar DXE driver after the unlock turbo boost one? Thank you and congratulations for the wonderful job.
It doesn't matter when to add a driver as long as you add each driver into their respective places.
Hey Miyconst, I hope you can help me understand what's going on with my 2666v3 please. I bought an x99 kit from Ali with a k9 and the 2666v3, which came from the store with turbo boost unlocked.
In both HWMonitor and AIDA64, the power consumption is shown only "package" and never exceeds 16W at full stress. My hypothesis is that the sensors are misconfigured and that 16W that I see as a "package", is actually the consumption of one of the 10 physical cores, totaling 160W. And the VID Max during the stress test is 0.990V, but in iddle it reaches 1.059V. What do you think?
Thank you for your excellent work!
The power consumption sensor is simply broken and there is no logic behind this value. If you want to know the actual power consumption - use an external wattmeter.
@@Miyconst
Thank you very much! I'm going to buy one to take measurements.
I had the same issue and HWMonitor will show incorrect info, just a few watts for cpu usage but using HWinfo showed the correct values and wattage. I tested via an external power meter and compared it to hwinfo information. Also compared to TDP levels min and max
Hello Miyconst. I recently purchased the 2024 version of the Huananzhi X99 QD4 motherboard that came with a E5 2666 V3 CPU, the one with 3 NVME slots. Is this motherboard considered LGA 2011-3 and will resizable bar work with it? Thanks.
Please watch the review: ua-cam.com/video/o0jH2ormcSE/v-deo.html
@@Miyconst So I can flash the MACHINIST E5-RS9 BX99DA08 GAMERS BIOS to it then?
When it comes to the Chinese motherboards I can guarantee absolutely nothing but it should work.
Greetings, I can confirm that it's working on my asus x99-m ws. Injected the driver manually with uefitools on the original cap file from the asus site. Also needed to apply uefipatches othervise I could not activate rbar, took me a couple tries but finally rbar is working with xeon e5 2699v4 an intel ark 750. For all asus users, only usb flashback works with the modified file easiely. Thanks for your guide and greetings from germany.
Thanks for the info and greetings back from Sweden.
Tried this on my Asus X99 Deluxe II. Downloaded the cap file from asus website. Injected the driver with uefitools on the original cap but when I attempt to flash the modded cap the flash utility says "Selected file is not a proper BIOS!" The unmodified cap will install just fine. Somehow the flash tool is seeing that the cap was modded and refusing to flash it. Any ideas on how to get around this?
@@otumseh4256 Asus refuses to flash modified BIOS, they have a security check for that, you need to either try to hack it with AfuWin or use an external flash programmer.
@@Miyconst I appreciate your response and suggestion. With it I was able to successfully install the modified bios by using AfuWin64 on a ROM that had its header removed and after applying UEFIPatches. Arc A770 is now working like it should. Thanks!
E5 2666v3 X99QD4 RX6600 Works! Thank you
You are a star, thank you for the video and the Mi899 tool..
I used AfuWin to dump & flash my "Asrock x99m Fatal1ty", script/tool froze during first attempt at "Erasing NVRAM Block" but luckily MB has dual bios chips, quick recovery flash and then it worked perfectly second try.
Using a E5-2695 v3, 64GB ECC with an RTX4090 on an Asrock x99m Fatal1ty, Bios P3.30, with 'Unlocked Turbo all cores' & now 'Resizeable BAR'. I can upload/send my bios if anybody wants it.
Please join my Discord and send me the BIOS so I can upload it to my OneDrive.
I recently got Huananzhi X99-TF-Q after watching your review. Will Re-bar work on it? I want to pair it with intel arc gpu so I’m not sure. Thanks!
I see no reason why it should not work. If you do everything right your Arc should get ReBar.
@@Miyconst I just finished all the steps and in GPU-Z its Shows Resizable BAR is Enabled!
I also have a computer with a HUANANZHI X99-TF-Q motherboard. With a graphics card
MSI GeForce GTX 1660 Gaming X 6Gb Resizable BAR worked fine.
I changed the graphics card to Asus Dual GeForce RTX 3060 Ti V2 Mini OC 8GB GDDR6
and the card only starts in Legacy mode. In UEFI mode the computer does not start,
and because of that I cannot turn on Resizable BAR mode!!!!
@@KRIS5112-ABC I enabled rebar with RTX 3060 12gb and it showed that it’s working. So maybe you did something wrong? I’m still waiting for my Intel Arc a750 gpu which will arrive in 2 weeks.
Hi is a nice alternative but what about the CPU temperatures? . And when are you going to review the Huananzhi X99-QD4. Thank You
ReBar makes no difference for the CPU temperature, X99-QD4 is currently being tested.
Hi, I'm from Brazil and your videos are really helpful around here. I wanted to ask for your help in my situation: I have a Kllisre X99 V201 with the C612 chipset. All the information I could find about this board says that it is compatible with the X99 8M-F BIOS, but the 8M-F uses the B85 or C226 chipset. Which BIOS can I use in this case? Maybe the X99 8M (non F)? Thank you very much in advance and I hope you continue with your excellent work!
I have never had a V201 with C612 chipset, but I can say for sure that B85 BIOS won't work on your motherboard. X99-8M BIOS might work, but not likely. If you don't have a programmer, I wouldn't risk trying it.
@@Miyconst yeah, it's really strange. In AIDA 64 it shows "Intel Wolfsburg C612", the stability test doesn't freeze and the sleep state works fine, so it's not a B85/H81 for sure. I bought it in late 2020, so maybe they still used better chipsets on these boards back then. However it doesn't have above 4G decoding on BIOS, do you think I can enable it somehow? Also if you want more information about this board so you can update it in your software and channel I can send it to you
@@rodrigovhn5479 most likely your Above 4G Decoding option is simply hidden in the BIOS. Create a BIOS dump and then open it with Amibcp tool, explore the BIOS settings and see if you can find Above 4G Decoding. If yes - set visibility to User then save and flash the modded BIOS. Remember to always keep a copy of the original BIOS and a CH341A by your hand.
Man! It worked on my Machinist MR9A Pro Max! Many thanks!! :) Anyway i could access overclock menu now?
No, overclocking has nothing to do with Resizable Bar.
You're enabling resizable bar, not overclocking. This may improve performance of your GPU but isn't in itself overclocking. If your motherboard has an overclock section and you can't find it, the chances are that you are in so called Ezmode and you need to be in Advanced Mode. Select Advanced Mode and then look for the overclocking section. Be very careful. Since you don't know that much yet about the BIOS and options there, do things one step at a time, in very small steps. I would recommend not trying to add resizable bar support until you are more comfortable with the functions and options in your BIOS.
@@ZenAndPsychedelicHealingCenter My Reasoning was, if we can add that in the bios, maybe we can also add more things.. overclocking, memory parameters, etc... I already added ReBAR. Works great.
@@Miyconst I still have both flash file on my desktop if you want it. MR9A Pro Max, 5.11, UEFI 2.4, Pi 1.3 with and without ReBAR.
An update of me here: i've managed to increase the bar from my rx570 from 256mb to 1gb on my plex hd(x79 turbo) motherboard but only without 4g decoding, anything more than 1gb and the computer won't post only with reflashing the bios to solve on that particular motherboard. My p9x79 by the other hand i've managed to put 256mb on my rtx2060 that was only 128mb, but it seems that this gpu's bios doesn't permit the gpu to go over 256mb! So actually i am quite happy with the results, and i hope this information could be relevant for you and your channel.
Como você colocou 256mb nela amigo? agradeço pela resposta :)
@@gui.giuliano2k21 Eu consegui com o rebarstate, ele ativou 256mb mas eu não vi diferença de desempenho, o resizable bar segue desativado, mas ainda assim a barra aumentou para 256mb, tem que cuidar pois o Pc pode não iniciar se mexer errado nisso aí, tem que pôr no máximo 256mb no rebarstate, e não mexe nas outras coisas.
@@fluthyer4362 Entendi. então no lugar de 32 que voce coloca no rebarstate como no tutorial, voce coloca 256 ao invés de 32?
@@gui.giuliano2k21 É outro número bem abaixo de 32, se botar 32 dá 16gb ou mais se não me engano.
Thank you man! We from Brazil really love your content about x99 kits! Congratulations!!
Question from MIYCONST.
I have a computer: with a HUANANZHI X99-TF-Q motherboard, 4 DDR 4 RAM modules,
and an Intel Xeon E5 2696 V3 processor. The computer also included a graphics card
MSI GeForce GTX 1660 Gaming X 6Gb and a 512 Gb NVMe drive.
I recently bought a new Asus Dual GeForce RTX 3060 Ti V2 Mini OC 8GB GDDR6 graphics card and I started having problems starting the computer. The board display shows the message "d4" and 8 beeps from the speaker on the board. Then the message "A6" is displayed and nothing happens and the monitor screen has not displayed an image since turning on the computer. Only after enabling the CSM function in the board's BIOS and in it "Video" to "Legacy" instead of "UEFI" did the graphics card start displaying an image and the computer starts properly but the PCI-Express Resizable BAR does not work. Can this problem be solved?
Regards.
Will this work on OEM workstations based on x99? Something like the HP Z440 or the dell precision workstation lineup?
It's hard to say before testing, Dell should work, HP - unsure.
@@Miyconst If possible, do try to test it out and share the results with us.
Also I appreciate your content, keep up the good work!
@@AbeelSiddiqui I have an HP z440 and I can't find the option in the BIOS to enable Above 4G decoding which is required for this so IDK
Hello there Myconst!, got it working on Z170 Gaming PRO Aura with laptop QTJ2, thank you! :D
You are welcome and thanks for the feedback!
thanks Miyconst . from Brazil
It works remarkably well. Free performance : ) Xeon E5 2640v3, Atermiter x99 v1.3, 16Gb DDR4, RX6600. Thanks so much.
Same configuration as mine, only changes that mine is RX 6600M. Is it still working normally?
@@Shadow-lq8vh Yup. I had the memory overclock bios at 0ne point but it reduced the CPU boost clocks to 2.8Ghz max.
@@jayming5565 This is bad, I want to try to do the tutorial.
Jay, is your motherboard that one with 4 RAM slots with 2 being orange and 2 being black ones? im waiting for my x99 atermiter to arrive,i couldnt find yours to compare
@@brehh1337 my x99 atermiter has 2 slots on the left orange and black, and on the right with orange and black too
thank you! ur great. that worked for me
Thanks, from Brazil. 🇧🇷
Ainda tem a necessidade de sempre desativar para poder tirar a bateria da BIOS? Ou corrigiram isso? Estou pensando em fazer ba minha 8 mf com rx6600 porem se ticer q necessidade de sempre desativar, nsl irei fazer, poderia testar?
Do these Huananzhi and Machinist motherboards you listed all have 4g Decoding in BIOs?
No, some have it, others don't.
Successfully installed on a x79 dual cpu motherbord with e5-2689 i hope it helps my radeon 6600 :)
helped?I have the same thing with only one e5 2689 and x79 turbo
@@ustrnge i can't say if i gained fps... for sure i didn't loose any... 😊
Hi, thank you for your effort on making this video. I'm currently on Gigabyte X99-Gaming G1 with E3 1660v2, I followed the instruction and inserted the ReBarDxe.ffs and flash the Bios. Everything works fine, I even verify that the installed bios has the new dxe driver. However I cannot find the option in the bios to enable above 4g. Could you please help me shed some light as what I may did wrong?
It doesn't seem like you did anything wrong, your motherboard probably doesn't have the Above 4G decoding feature.
Hello, I have a question please, are the VRMs of atermiter x99 d4 enough for the e5 2670 v3 or at least will it work good with r5 2620 v3?
If not what is the best budget x99 now?
Hi there. I can suggest you these two videos that should answer all your questions: ua-cam.com/video/7Pyef_ySHwo/v-deo.html and this one ua-cam.com/video/AW0QgQNbBwA/v-deo.html
@@Miyconst Thank you very much
Can you just please tell me what do you think about the e5 2667 v4 QS it has 3.6ghz boost clock and 8c and its only for about 56€ is it good or will an r5 2643 v4 or e5 2678 v3 or 2666 v3 be better?
ASUS X99-DELUXE II + Saphire RX 5700 XT Nitro+ SE (410/Samsung) Is it possible to add? Resizable BAR. If possible, explain step by step. Tried to take ready from your link, refusal, "The file is not compatible". I tried installing the utility in the middle of the bios and from a 32GB fat 32 USB drive.Thank you.
It works for me! I have the same Motherboard
I have a Huananzhi X99-P4 , this is not in the list. Which one can I pick alternatively? It has an Intel H81 chipset I found, there's one mobo in the list called 'Kllisre X99 V201' with H81
I didn't test X99-P4 thus I don't know what BIOS is compatible.
Thanks for this 🥰
How can i flash my bios if my motherboard is a GIGABYTE Z170N-WIFI ?
I did all the steps but when i save the file i have a .rom file. My motherboard has a Z17NWIFI.20i file. If i try to add the ReBarDxe.ffs driver in the Z17NWIFI.20i file, it won't work since when i try to update it in the bios it says "invalid bios image". I tried saving it with the same name and it didn't work.
It seems like my motherboard doesn't take files with .rom at the end ? Or do i need another program to be able to flash the bios ?
Edit: The file can be edited and it does work to be saved, i just can't flash the bios with the saved file that contains the ReBardDxe.ffs , it tells me "invalid bios image" when i click on it.
Working fine with ASRock X99, MSI X99 Motherboards. (not even Chinese X99 Motherboard)
How did you get it to work on AsRock X99? I have a Taichi and would like to try it.
I tried this tutorial on my Asus X99 Pro/USB 3.1, but it didn't work. Is there any way to activate it on this motherboard?
I'm using rx 6500 xt, xeon e5-2640 v3 (not on turbo), 16 gb ram and a atermiter x99 motherboard. After doing everything like in a video it shows in gpu z that resizable bar is still disabled. I tried to update vbios but it said i have the newest version.
Now this is some good stuff!
I am currently trying to insert a file in UEFITool but it is not letting me do so anywhere. I have the same motherboard as in this video, used the same Mi899 tool but am now stuck. What could be the issue?
Very interesting. Oh though concerning the Intel Arc series, the software dashboard doesn't play nicely with systems below 11th gen. I try this on my 9900KS it wouldn't open unless I had 11th gen or above.
That's so shitty. Intel screw up this launch so hard. 😢
@@Miyconst it still ran Cyberpunk and Skyrim. I just have no control over the card. I do have an 11th Gen intel cpu I look forward to testing it there.
What is the Mother board selection in the mi899.exe list of motherboards? I could not find X99-A (ASUS) in the list
Does this work on reputable brands, or just specifically designed for Chinese off brands? I have an Asrock Taichi i'd like to enable rebar on.
It's supposed to work with all X99 boards, as long as you can flash the modded BIOS.
@@Miyconst You think its worth picking up a CH341A for ease of flashing? At a glance it appears this board has the removable modules.
@@GeneralLee131 yes, if your motherboard has removable BIOS, then the BIOS flash with a CH341A is really easy, and I would recommend that.
@@Miyconst It works! Definitely had a modest performance boost on my 6850K / 7900 XT rig. Thanks for taking the time to make this tutorial, i really appreciate it!
not help, my x99 board have rebar on it, but gpu-z say Resizable BAR enabled in BIOS - No and CSM disabled - No.
but I did everything as it was in the video.
dislike
What is your GPU?
@@Miyconst 6600
Then you either did something wrong or your BIOS doesn't properly support UEFI boot.
Any idea if the Qiyida V205 motherboard has A4GD to affect this mod? I'm looking at getting an A770 for my Linux daily driver (ole 580 died, RIP), but I need to know if I can turn on ReBar first
I know I'll have to boot into Windows to use most of the tools for this, but that's not an issue for me
Where is Mi899 1.2.9? In GitHub only have 1.2.8
It's not released yet.
Interesting. It looks like adding a nvme driver into uefi bios. So LGA1155 ivy bridge might be benefited from the re-bar. Also thanks for supporting Ukraine !
Yes, it's very similar to NVMe hack, the hardware is compatible, the software was not updated.
hi! i'm done the turbobust unlock mod on the d8 motherboard like you explain in your another video, but now i can't find anymore the "above 4g" in the bios. do you know were is? or can you suggest another bios with the "above 4g" in the option?
Apparently the BIOS you have doesn't expose the settings. You can mod it with Amibcp.
@@Miyconst what do you mean?
Ok i find out what you mean, I've already done all the bios modification and now I've all core turbo bust e resizable bar enabled thanks you very for your help and for the amazing guide you made!
@@Nekovocal great job learning something new!
@@Miyconst thanks
Just tried this with a X99-TF Gaming (C612), E5-2678v3, 32GB Corsair DDR4 3200 memory, and a Radeon Pro W5700. I used the latest "TV30.bin" bios from Huananzhi and modified it to use the turbo unlock (left C6 enabled), performed "rebar" on that modified bios (inserted after my V3 line) and it all worked perfectly. Still testing uplift in games however. I wonder if anyone knows how to get the Corsair memory RBG function to work with the ICUE software. On the TF, Icue sees memory but does not list any way to control the RBG settings. Tired of the rainbow!!! 😁 Thanks again!!!
As far as i know, Chinese X99 boards are missing some hardware features to control the RAM RGB lights.
Can you send me your bios? I have the same card as you did in the video but the gpuz says you need to activate it in the bios I have the 4g decode activated already
@@vinisampaio4254 Bios flashing is a tricky business. Hopefully you will have the same success I have had following the steps outline by Miyconst. I have uploaded a folder and files required to duplicate my process. Good luck. drive.google.com/drive/folders/10___M5UbA9owTx5Xn7uI995I7COMhaZS?usp=share_link
@@Miyconst I am not trying to control the Ram's RBG with the board. I am trying to use Corsairs ICUE software to control the ram installed on the board. The software does see my keyboard and mouse and allows for control of the RBG. But.... It does give me any option to control the RAM although it clearly lists information for it. I have heard that there's an option called "speed write" when enabled helps from forums, but I do not see any option for that in the bios. I guess I am out of luck. I also posted the bios I modified to google for those who wish to follow my setup. Cheers.
@@anthonyslaughter1728 I flash Rtx 3070 Bios sucess Rebar On THX man
I can't do the step of inserting "ReBarState" in "UEFITool" I don't see the option available.
My motherboard is Machinist X99-RS9...
Exited would be an understatement
Hi, im new to bios modding but is there an easy way to force flash this onto an Asus X99-WS USB 3.1? I modded the bios as shown in the video, but when i try to reflash using asus ez flash it says its not a valid file
You need this to flash the BIOS: m.ua-cam.com/video/4qX2zihB6UE/v-deo.html
Hi. I have 5960x cpu with Asus rampage v edition 10 motherboard. Is there any way I can apply resizable bar on my mobo as chinese mobos with 0 issue? Thanks.
It's totally possible, but you need to flash the modified BIOS with an external flash programmer, Asus flashing tool won't accept modified BIOS.
Hi Miyconst, will it work on my Huananzhi X99 F8 which was purchased on year 2020 April? Thanks
Yes, I see no reason why it should not.
@@Miyconst Ok. But not sure why I could not find 4G decoding in the bios Advanced tab. I have no PCI Subsystem category also. Hence, I will try to flash the bios using your -70/50mV bios ROM.
However, I am not sure which one to use, the V3 Payne or the S3Turbo V0.2 for my X99 F8 which was purchased in 2020. I wish to have your kind advice, thank you.
Great Many Thanks :)
Помогите пожалуйста, сделал все по инструкции, но в gpu z написано Resizable BAR enabled in BIOS - NO
Do you think that is RX480/580 will be better after this mod?
It would, a tiny bit.
I'm using Parsec on the baremetal, will this still work if I then run the rebar.exe on my gaming VM?
the resizable ffs drive have turbo boost unlock?
No. These are two different.
@@Miyconst Ok. Thanks 🫡🤝
the x99 mainboard encountered a pretty big problem. It was taking too long to post ram! the code on the main says code 79 takes about 12 seconds for it to recognize that there are 2 sticks of ram plugged in it would be better to ignore
i have injected on the last line of DXE drivers the TU drivers to undervolt the cpu and this line to enable REBAR must be in last line or before the undervolt line ? i did on before the undevolt line and when i go on windows to install gives me an error saying its not enble on UEFI bios
Im trying it now with the dual socket F8D. But the regions on UEFITool is not showing so I dont know where to insert the rebar ffs file. Really liked your detailed review of the F8D. Im planning to get the F8D Plus withe 3 pcie x16 and 3 pcie x8
It's impossible to guess what is wrong, thus I would recommend you to join my Discord and send some screenshots there.
@@Miyconst it was there all along lol, guys in discord help me. Now, however I dont get any display when I change bios Video Settings for CSM to "UEFI", OS works just no display, can even access bios again to change it bak to legaccy
@@AgentDonnutte you can clear CMOS to restore the BIOS settings and then it will go back to CSM.
Hey :) I got it working. I forgot that I did a fresh format to win 11 and that made my drive MBR thats why eufi boot is not working
buddy, it turned out, but everything in the bios became enlarged healthy X 99-TF 1.1 bios from Koshak 25.05.2020 v11
The Huananzi logo has also become healthy
after returning the settings, he refused to start at all, only the battery had to be thrown off.
good video. thank you 😁👍
performing this procedure is relevant to make video encoder using obs Studio whith a GPU AMD RX5700XT ?
Most likely not, but I am not sure.
This worked on MSI X99a Pro carbon gaming and 6700k. And since I used a dump all my bios settings remained. If you would like me to send you the latest one from msi with resizable bar (not a dump) I gotchu.
Hi Nicolas, I also own this motherboard, how did I reach out to you so that I can obtain this BIOS file? Many thanks in advance for your assistance.
@@danielkumm5288 thank for your replying I tried to find this video so I could leave a second comment. Doing this ended up breaking my computers ability to handle a bios, so all the settings I had were there in “lock” when I would turn on the computer it would go straight to windows no way of getting to bios. I had to trick the computer into re-flashing it was this entire thing freaking awful.
does thus work with the turbo boost unlocking and in what order should i do both? Turbo boost unlock first or the resisable bar first? Thanks!
Yes, it does work together and the order makes no difference.
@@Miyconst Thank you! My x99 mobo is on it's way i will try to set it up with both. Last question, where might i find your discord channel? I'd like to join if possible!
@@chiari4833 the link is available on my UA-cam channel's page, it's the small icons in the top right corner.
I am going to do this on t5810 using CH341A for read and write bios, are they any extra steps I need to take for this workstation? or just extract bios from capsule and modify it using tool then write it using flasher.
I have never tried it with T5810 but according to others it's exactly the same procedure just need to use CH341a to read/write BIOS.
@@Miyconst thank you I'll try it
@@MrSteel-e4q did you create a dump of existing bios or just downloaded new bios to modify and flash on chip? I have trouble creating dump.
Great work!