Great job one of the better videos I've seen for the A-10 mini pro suggestion would like to see may be an actual mock up of having an interview with someone at exactly how you set up and do it on the Internet.
We use a HDMI splitter on the laptop connected to the HDMI 4 input . Then we use the second output to connect to the "house" monitors (large TVs). We run our PowerPoint slides on the laptop and then we can select the HDMI 4 input as appropriate for the live cast.
So... can you use the Network cable to stream the Program on UA-cam while using the HDMI Out to preview a MultiView while also recording to an SSD using the USB-C?
How do you connect PTZ controller for every camera with this setup? and If the USB C useable as a web Cam is it means this is a 5 Channel vedio mixer? is it possible to select and playback each captured video clips from external storage toward HDMI out again? Tnx
Well done Kennis for getting your head around this tech. Got mine waiting to go. Normally see you demonstrating the Roland GR55. You can use a hub I think out of your USB-C port and have multi memory cards ready to go.
This was such a fantastic training. You are an Excellent Teacher!!!! I am a beginner and you just helped me learn faster and avoid a lot of confustion!
Subscribed so I can view later videos on this and have my assistant also watch them. I will be receiving an Atem Min Pro ISO soon and have a Mini Extreme ISO on back order (hopefully, that arrives sometime in May or early June).
In our church, we currently only have a single PTZ camera. The audio from the board is going directly in to the camera and then I'm using the HDMI output of that camera to feed the audio/video of our live stream. I did this so it was all in sync at the source. So I'm curious how you can control the audio settings if the audio is coming in over the HDMI cable and not an actual mic/audio input.
late to the party here, but thx for all this training, much appreciated. Question: how can i use a still in a pic to pic? It seems it won't allow me to do this. I suppose the only way is to put a camera on the still and work that way? Also, it is not possible yet to change a scene and revert back to the enlarged pic in pic? Hope they addressed this in new software.
A little confusing at times, but you answer a lot of questions that I had about using the switcher without a computer...Bought the basic mini. - it is with a friend in CA. Should have bought the mini pro...🙄
Hi Kennis, Thanks for this Tutorial! Well done! I have a question: We have Midas air 18 digital mixer in our Church. I get digital sound from mixer through USB. How to turn this sound into audio input of ATEM Mini Pro for live streaming? Thanks
For monitoring audio, many monitors (atomos for example) have a headphone jack. If using a gopro. Put it on a tripod or some sort of fixed support and turn off stabilization, or else you will have a one second delay in video. Now for my question. The mic / line input Jack's. Are they stereo or mono? This will determine if I get a y splitter or 2 seperate cables when connecting to soundboards or other audio devices.
Thank you so much for these videos. Can you record four cameras via the USB drive at the same time? Done without streaming just as a dedicated recorder?
Kennis can you have the laptops webcam under one of the buttons. Plus can I not have the multi view on my laptop screen (not a small monitor like you have). Plus - if I want plug in a SSD to record - I can't then use the USBC out to a laptop (do I then have to use the ethernet)
1. Cannot use the laptop webcam as a camera. 2. No multiview on laptop. Only external monitor. 3. Usb can act as a webcam and record to ssd. You have to choose one or the other.
Did I understand you correctly that the usb only records the program out and the hdmi has either mulit view or program. So am I thinking correctly that I can have the multi view on the hdmi, hit record and the final output would be recorded to a USB ssd?
great video mate, thanks. just a quick question about the mic and audio... How do you hear yourself and if your audio sound and level is good or not? I dont see a headphone jack on the atem
I'm going to be feeding the ATEM digital audio (as a mix). Could I simply run it into one of the HDMI ports and select that source's audio as the only audio? I only need 3 of the 4 HDMI inputs for video. I feel that would be better than running the mix into the Mic input. I'll be running RJ45, so I'll need an adapter. Thanks!
Hi Kennis, we use this in church along with Restream, but we have a background squeak on our streams, but not live in church. Any idea what may be causing this? Thanks, Mark
Curious. Some sort of audio feedback. Do you have a dedicated mic? Might have to play with your audio/audio input selection, etc? Could two audio sources be competing? I didn't help at all, let us know how you get on!
I’ve noticed that the pre gain on atem is set at 0 which pretty high, especially depending on the input. When you turn it down it’s much better try -10 to start, we settled on -15 for now. Load up Atem Software control so you can see the audio knob at top, drag left to decrease gain
Can i just use this to record my phones display using a hdmi adapter plugged into the hdmi in on the yolo box...not interested in streaming just recording my favorite shows off my phone
Yes. It’s called a tally light. There is not a simple cheap way to do it. Here is one option I have found, though I have not tested. github.com/AronHetLam/ATEM_tally_light_with_ESP8266
Yes. It takes some figuring out. But yes you can use the picture in picture and resize an input to be half screen size. What context are you trying to do that?
@@KennisRussellTech I'll be running a video on the left and a livestream from my UA-cam channel on the right. The video will come from my Atem Shuttle and the livestream off UA-cam will come from my computer....both hdmi into the switcher of course.
hello, can you tell us whether these audio inputs 1 and 2 are stereo or mono? 1 left channel, 2 right channel, or they are mono, 1 and 2 bouth mono channels left and right together ?
If PiP is camera 1 and is on; Im on camera 2 with PiP on, I switch to camera 3 PiP is still on. When I switch to camera 1 PiP is still on (of camera 1). Is there a way for the Atem Mini to turn off the PiP when switching to itself automatically? Bonus points if switching back to cameras 2 or 3 and PiP is back up??
In my setup I would like to send the cameras to OBS on my PC and the PC screen (I would like to loop in) to a 2nd screen I have. But I don't want to send the PC screen to OBS.
Could you please let me know if we can plug a hdmi splitter at the hdmi output in order to get a second screen whom will act as control monitor (dog house)?
@@IvyPoisongood question about format, I’ll be testing this for the first time today. As far as pre setup, not sure but I expect not much as I imagine it would just output to a video and an audio folder, then you match them in post production. But we’ll see
Do I have to set the camera to 1080p60 if that is what I'm streaming, or can I leave them in 4k mode as they are for normal shooting? Will the atem capture at 1080p60 regardless of camera settings?
Have you experienced audio drift when using the USB as your livestream output? We have to use the HDMI as our main output which unfortunately removes our ability to use the Multi cam view and making it pretty impossible to have a floor cam at my church. I'm not sure if there's been an update to correct this or not but I have seen other people talk about having the same problem.
Great video. On ‘The Joe Rogan Experience ’ Young Jamie his producer is able to pull up information on the computer and have it on the screen within a camera shot, I was wondering if that can be achieved on the atem mini pro or is this something that’s achieved in post production / video edit? Thanks,
Not sure if you are still asking. But you can connect a computer with hdmi to the atem mini pro. form the computer you can select if you want to duplicate your screen, or project it.
I ordered the ATEM mini pro, but before it arrived I found out, that you cannot both record to a harddrive AND use the usbc-out as as webcam, which is what I need for streaming Zoom meetings. So I actually canclled the order again. Any solution or workaround to this issue ?
I really wish they could make it to both too. There are a couple ways. There is a program called OBS that people use to stream. You can use that program to record your the zoom meetings. Also, have you tried the built in recorder in zoom?
hi! mine LED DISK is lght up, but theres no disk appear at multi view. i use OTG to convert connector usb type c to external drive type a. can you show how to fix it? thank you..
Hey man, are your subtitles turned off or youtube is doing something weird? I'm noticing a lot of videos with automatic generated subtitles unavailable.
Can be but if you use onboard audio inputs it limits it tremendously. We used to output audio from a mixer to OBS, and then stream, but using the hardware to do it all plus encoding has helped so much. Night and day
I have Atem mini pro but when I plug in my inputs sometimes I don't get signals. wanted to know if it's the type of HDMI I'm using. I have this cable If I don't plug it in HDMI port 1 it doesn't give a signal. whats the best HDMI cables to use?
I'm interested in getting the Atem, but I came across a so called competitor. I've been watching your videos and trust your opinion, so if I may ask you what do you think of this. 🎥A True Atem Competitor ⌨Osee GoStream Deck - Your ultimate live streaming video switcher ⭐Stream Directly to 3 Destinations Simultaneously ⭐Internal Video Recording and Playback by SD Card ⭐8 Macro Memory Buttons ⭐Super Source ⭐2 HDMI Out and 2 Type-C Ports ⭐PGM and PVW 2 Bus Buttons ⭐Power Button and Headphone Jack ⭐T-bar Fader ⭐Built-in UI system ⭐Additional NDI functionality that only cost $69! This is what they claim. Looking forward to what you have to say. Appreciate you.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
This is why I love UA-cam. I learned so much from one video. Thanks for the great content.
You simplified this excellently. I would NEVER have understood how to use this on my own.
Awesome. Glad to help.
Can you use the USB-C port on the ATEM mini pro as a webcam though it's not labelled as webcam out?
Great job one of the better videos I've seen for the A-10 mini pro suggestion would like to see may be an actual mock up of having an interview with someone at exactly how you set up and do it on the Internet.
The AFV function described at 4:40 - thanks for the info, Kennis!
Thank you very much for your Atem mini Pro Tutorial show!
Thank you so much for the knowledge much love from Africa 🇳🇬
your the first ever to go over video set ups, cool product
Thanks
Thank you Kennis for the tutorial.
You’re like the nerdy tech version of Blake Shelton
😆
😂😂😂this guy
We use a HDMI splitter on the laptop connected to the HDMI 4 input . Then we use the second output to connect to the "house" monitors (large TVs). We run our PowerPoint slides on the laptop and then we can select the HDMI 4 input as appropriate for the live cast.
So... can you use the Network cable to stream the Program on UA-cam while using the HDMI Out to preview a MultiView while also recording to an SSD using the USB-C?
Extremely well explained, understood all its functionality in one shot, thank you!
How do you connect PTZ controller for every camera with this setup? and If the USB C useable as a web Cam is it means this is a 5 Channel vedio mixer? is it possible to select and playback each captured video clips from external storage toward HDMI out again? Tnx
Do I need a 'special' monitor for multi view? Or I can use HDMI output to any monitor and see all camera?
Most monitors that take hdmi inputs should work. However, computer monitors that only take dvi or vga do not usually work.
Can one use just a regular TV HDMI to output as a Monitor .
Short and complete video! Thank you! Blessings
awesome video - do you know why i lose the PIP when i make a transition? thanks
Appreciate your efforts. Thanks for sharing. Helped me alot.
One of the clearest explanations I’ve seen on the Atem Mini Pro great job thank you liked and subscribed 😀
Awesome. Thanks for the encouragement and sub.
Well done Kennis for getting your head around this tech. Got mine waiting to go. Normally see you demonstrating the Roland GR55. You can use a hub I think out of your USB-C port and have multi memory cards ready to go.
bro thank you! you save me tons of time!
Thank you so much, by other than your side monitor what would you connect the HDMI out to?
This was such a fantastic training. You are an Excellent Teacher!!!! I am a beginner and you just helped me learn faster and avoid a lot of confustion!
I just got an ATEM Mini Pro and it works great. Is there any way to get a different image on the Preview screen than the Program screen in Multiview?
how did you connected gopro to that HDMI input?
Absolutely fantastic and informative! Thanks man!
Subscribed so I can view later videos on this and have my assistant also watch them. I will be receiving an Atem Min Pro ISO soon and have a Mini Extreme ISO on back order (hopefully, that arrives sometime in May or early June).
i have a roland v-1hd and it has preview and monitor output
way better than having to push the PRO button to switch back and forth
Why did it take you until 17:38 to say you were using a GoPro Hero 3, just the camera I am adding to my setup. What do you use for a mount?
Just a basic GoPro mount.
Absolutely awesome presentation 👍👍👍
Thanks. Have you made a video on the on air function? I applied stream key but only get on air flashing on and off.
This is not explained much anywhere, but go to connections in the software control, connect first, then push fader all the way to top, then hit on air
Thank you this was really helpful
thanks for a great intro vid, looking forward to more - love the ATEM Mini pro
thanks man
Great Video! Thanks for putting this together. Been using ATEM Mini Pro for a while still learned a lot watching you vid.
In our church, we currently only have a single PTZ camera. The audio from the board is going directly in to the camera and then I'm using the HDMI output of that camera to feed the audio/video of our live stream. I did this so it was all in sync at the source. So I'm curious how you can control the audio settings if the audio is coming in over the HDMI cable and not an actual mic/audio input.
Thank you for breaking it all down
Awesome overview. do you know of a good reference on how to guessstimate the ssd size requirements for length of time recording? Required GB per hour?
A 2tb ssd will give you hours of 4k footage.
To be certain, you'll have to check your camera/input rate, bitrates, etc.
great overview!!!
Question sir, can I take the output from the atem mini pro via usb c and send to a hdmi hub to feed my screens and use atem as a swither?
late to the party here, but thx for all this training, much appreciated. Question: how can i use a still in a pic to pic? It seems it won't allow me to do this. I suppose the only way is to put a camera on the still and work that way? Also, it is not possible yet to change a scene and revert back to the enlarged pic in pic? Hope they addressed this in new software.
There’s stills you can store in the device using media using the software , and switch as needed
Yes, but it cannot save an enlarged pic when changing cameras. reverts back to small
Excellent tutorial. I have the Atem mini and love it!
Thanks. It really is a great product.
Great video overview! I just received the ATEM Mini Pro today and I'm looking forward to learning more about it's capabilities. Liked and subscribed!
A little confusing at times, but you answer a lot of questions that I had about using the switcher without a computer...Bought the basic mini. - it is with a friend in CA. Should have bought the mini pro...🙄
How did you connect the monitor and also is it possible to have the monitor on multi- view while the output is on program out?
You didn’t ask me but I believe this is possible. In one of my church setups I monitor the multi view, but what is sent to zoom is the program view
@@musiciansfriend2 thank you
Can the ATEM do a three view split screen? As in three cameras at once?
Hi Kennis, Thanks for this Tutorial! Well done! I have a question: We have Midas air 18 digital mixer in our Church. I get digital sound from mixer through USB. How to turn this sound into audio input of ATEM Mini Pro for live streaming? Thanks
Hi, how did you adjust your lighting so everything matches if you have different cams? does the software do that for you on the fly?
It color matches with BlackMagics pricey cameras only. Yours you’ll have to match yourself if they’re different brands
For monitoring audio, many monitors (atomos for example) have a headphone jack.
If using a gopro. Put it on a tripod or some sort of fixed support and turn off stabilization, or else you will have a one second delay in video.
Now for my question. The mic / line input Jack's. Are they stereo or mono? This will determine if I get a y splitter or 2 seperate cables when connecting to soundboards or other audio devices.
Can you stream directly to Streamyard with this or do you still need a capture card. Great video!
Can you use a t.v. or computer monitor for the hdmi out or do you have to use something like a Ninja ATOMOS?
Thank you so much for these videos. Can you record four cameras via the USB drive at the same time? Done without streaming just as a dedicated recorder?
Kennis can you have the laptops webcam under one of the buttons.
Plus can I not have the multi view on my laptop screen (not a small monitor like you have).
Plus - if I want plug in a SSD to record - I can't then use the USBC out to a laptop (do I then have to use the ethernet)
1. Cannot use the laptop webcam as a camera.
2. No multiview on laptop. Only external monitor.
3. Usb can act as a webcam and record to ssd. You have to choose one or the other.
Is the second monitor essential or can I manage to do this without. I am trying to set this up for my church. Please let me know. Thanks.
Also, I cannot record via Samsung t7 using the Atem Mini Pro.
Have noticed issues with that external hard drive and the Atem Mini Pro.
Did I understand you correctly that the usb only records the program out and the hdmi has either mulit view or program. So am I thinking correctly that I can have the multi view on the hdmi, hit record and the final output would be recorded to a USB ssd?
Excuse my question, do we need a computer beside to record or we can do it with only the Atem mini pro, a disk and a monitor ? Thanks
great video mate, thanks.
just a quick question about the mic and audio... How do you hear yourself and if your audio sound and level is good or not? I dont see a headphone jack on the atem
Hi! Thank you for this video. What mic were you using? Thanks.
I'm going to be feeding the ATEM digital audio (as a mix). Could I simply run it into one of the HDMI ports and select that source's audio as the only audio? I only need 3 of the 4 HDMI inputs for video. I feel that would be better than running the mix into the Mic input. I'll be running RJ45, so I'll need an adapter. Thanks!
Yes, be sure to adjust pregain down via the software under Audio. It’s located at top
How is your microphone routed? To a mixer and then line level in. Or is it mic in?
Awesome! Thank you!
Hi Kennis, we use this in church along with Restream, but we have a background squeak on our streams, but not live in church. Any idea what may be causing this? Thanks, Mark
Curious.
Some sort of audio feedback.
Do you have a dedicated mic?
Might have to play with your audio/audio input selection, etc? Could two audio sources be competing?
I didn't help at all, let us know how you get on!
I’ve noticed that the pre gain on atem is set at 0 which pretty high, especially depending on the input. When you turn it down it’s much better try -10 to start, we settled on -15 for now. Load up Atem Software control so you can see the audio knob at top, drag left to decrease gain
Can i just use this to record my phones display using a hdmi adapter plugged into the hdmi in on the yolo box...not interested in streaming just recording my favorite shows off my phone
Hi there, do you know if there's any kind o light to id witch camera is on that I can use with this Mini PRO?
Yes. It’s called a tally light. There is not a simple cheap way to do it. Here is one option I have found, though I have not tested. github.com/AronHetLam/ATEM_tally_light_with_ESP8266
Can I do Left/Right Split screen with this?
Yes. It takes some figuring out. But yes you can use the picture in picture and resize an input to be half screen size. What context are you trying to do that?
@@KennisRussellTech I'll be running a video on the left and a livestream from my UA-cam channel on the right. The video will come from my Atem Shuttle and the livestream off UA-cam will come from my computer....both hdmi into the switcher of course.
Just one question: is it necessary to have wifi for using the ATEM Mini Pro? Or is it also possible to use the ATEM Mini Pro without wifi?
You do not need WiFi.
In fact. There is no WiFi on the Atem mini pro, only Ethernet.
Can I connect the Atem Mini Pro to my computer via Ethernet and not have to connect the USBC to the computer?
I’m curious about your audio chain. How do get pc audio AND your mic audio at the same time?
hello, can you tell us whether these audio inputs 1 and 2 are stereo or mono? 1 left channel, 2 right channel, or they are mono, 1 and 2 bouth mono channels left and right together ?
Both stereo
How did you get the gopro to work in your setup?
Hdmi mini to hdmi cable.
Is this how you make all your videos? Can you record and change cameras and levels afterwards?
I cannot change cameras afterward. Not with the Atem mini pro. I may get the Atem mini ISO, which records all camera for later editing.
Can I use USB-C to HDMI adaptor to have webcam output of ATEM Mini Pro to HDMI display with direct live streaming on simultaneously?
If PiP is camera 1 and is on; Im on camera 2 with PiP on, I switch to camera 3 PiP is still on. When I switch to camera 1 PiP is still on (of camera 1). Is there a way for the Atem Mini to turn off the PiP when switching to itself automatically? Bonus points if switching back to cameras 2 or 3 and PiP is back up??
May I ask which mic you are using? I have been trying to use an inexpensive lavalier mic and I get zero sound. Any suggestions would help.
In my setup I would like to send the cameras to OBS on my PC and the PC screen (I would like to loop in) to a 2nd screen I have. But I don't want to send the PC screen to OBS.
Could you please let me know if we can plug a hdmi splitter at the hdmi output in order to get a second screen whom will act as control monitor (dog house)?
great not many go into this
Quick question.. is there noticeable lag between the audio going to the Mic port versus the Video input you did?
In which format does it record to SSD drive (when hitting the "record" button ?
Thx
also how much of software configuration it takes or installation before it can be used (other than plugging all the devices in respective ports) ?
@@IvyPoisongood question about format, I’ll be testing this for the first time today. As far as pre setup, not sure but I expect not much as I imagine it would just output to a video and an audio folder, then you match them in post production. But we’ll see
Can you use this to record shows/movies on Netflix, HBO, Hulu etc ..?
Do I have to set the camera to 1080p60 if that is what I'm streaming, or can I leave them in 4k mode as they are for normal shooting? Will the atem capture at 1080p60 regardless of camera settings?
Have you experienced audio drift when using the USB as your livestream output? We have to use the HDMI as our main output which unfortunately removes our ability to use the Multi cam view and making it pretty impossible to have a floor cam at my church. I'm not sure if there's been an update to correct this or not but I have seen other people talk about having the same problem.
I’m not sure what you mean by audio drift. Do you mean it slowly getting out of sync?
Any help lately my mini pro when plugged in comes on at higher volumes then when I turned it off.?.
Great video. On ‘The Joe Rogan Experience ’ Young Jamie his producer is able to pull up information on the computer and have it on the screen within a camera shot, I was wondering if that can be achieved on the atem mini pro or is this something that’s achieved in post production / video edit? Thanks,
Not sure if you are still asking. But you can connect a computer with hdmi to the atem mini pro. form the computer you can select if you want to duplicate your screen, or project it.
@@josiahurban That’s awesome, thanks for replying dude. 🙌🏾
What is the atmos monitor
I ordered the ATEM mini pro, but before it arrived I found out, that you cannot both record to a harddrive AND use the usbc-out as as webcam, which is what I need for streaming Zoom meetings. So I actually canclled the order again. Any solution or workaround to this issue ?
I really wish they could make it to both too. There are a couple ways. There is a program called OBS that people use to stream. You can use that program to record your the zoom meetings. Also, have you tried the built in recorder in zoom?
hi! mine LED DISK is lght up, but theres no disk appear at multi view. i use OTG to convert connector usb type c to external drive type a. can you show how to fix it? thank you..
Cheers! ❤
Hey man, are your subtitles turned off or youtube is doing something weird? I'm noticing a lot of videos with automatic generated subtitles unavailable.
Interesting. Not sure.
How about lip sync issues? Is that a problem?
Can be but if you use onboard audio inputs it limits it tremendously. We used to output audio from a mixer to OBS, and then stream, but using the hardware to do it all plus encoding has helped so much. Night and day
I have Atem mini pro but when I plug in my inputs sometimes I don't get signals. wanted to know if it's the type of HDMI I'm using. I have this cable If I don't plug it in HDMI port 1 it doesn't give a signal. whats the best HDMI cables to use?
What device are you hooking up?
@@KennisRussellTech DSLR canon 80D
I would try a different cable and see if that works. Sometimes hdmi can be pretty picky.
Try another hdmi port. I heard sometimes certain devices don’t like that first port. Hope this helps.
I’ve read reviews indicating that this is not compatible with Zoom. What experience do you have using this with Zoom?
That is not true. I have used it with zoom since April at least a couple dozen times.
How many outputs does it have because I want to send 1 output to our church TV screens, then 1 for the live streaming pc
That’s what I’m trying to find out also.
I thought the difference between the mini and the pro was that the pro could output a separate multiview.
Hi. Can I use my phones (samsung s10 and s 20) like the cameras ?
Yes. As long as it can send it’s feed via hdmi.
ok but how do i get it to automatically switch between my cameras without me manually pressing on the board?
I'm interested in getting the Atem, but I came across a so called competitor. I've been watching your videos and trust your opinion, so if I may ask you what do you think of this.
🎥A True Atem Competitor
⌨Osee GoStream Deck - Your ultimate live streaming video switcher
⭐Stream Directly to 3 Destinations Simultaneously
⭐Internal Video Recording and Playback by SD Card
⭐8 Macro Memory Buttons
⭐Super Source
⭐2 HDMI Out and 2 Type-C Ports
⭐PGM and PVW 2 Bus Buttons
⭐Power Button and Headphone Jack
⭐T-bar Fader
⭐Built-in UI system
⭐Additional NDI functionality that only cost $69!
This is what they claim. Looking forward to what you have to say. Appreciate you.
WEBCAM OUT! FPS & Res Scaling! Yeah!
They should've had a seperate HDMI output for multi-view.