You rock! there are lots of videos on YT that suggest how to live stream to UA-cam, but none show how to connect ATEM to network! the most important part!
I've come to the party a little late, Alex, but finding your series on the ATEM Mini / Pro super useful, especially the level of detail, clarity and tying up loose ends. You mention using mobile apps as software controllers, also mobiles over wifi. I wonder if you could do an episode specifically on this topic?
This is really helpful! So in theory, instead of buying the network switch, can I just use my orbi router which has multiple ports to do everything you are doing? You only are using the switch to allow for one less cable running across your desk is that correct?
Hey Matt, yes if your router has multiple Ethernet ports in it, just connect one up to your ATEM and then other to your computer. Or connect one to your ATEM and then connect your Mac/PC via WiFi to your router. Both will work fine, and you will be able to control your ATEM over the network :)
I like I like!!! The option to use many devices to control it is extra cool, having a wireless option but phone is dope if doing solo live and setting up away from the computer setup is fantastic.
Great video Alex, but our church uses ProPresenter-7 on a iMac in another room. How do I get the Atem’s final Broadcast into the ProPresent-7??? Thanks
Did you mean spliter or swither? And what is the different between getting network via ethernet cable direct from the router or modem and do the network from a swither or spliter?
At last, a worthy instructional video on setting up the Ethernet/network side of things. I actually returned my AMP, as I thought it was faulty, and it may well have been. I received my new one today and thought, 'let me check out that Alex P fella'. The one thing I didn't do was connect my Imac and macbook pro via Ethernet along with the AMP. The diagram made things much clearer. My only question, 'Shouldn't the AMP be able to connect to the internet via the ethernet without having the imac and macbook pro connected via ethernet cable?
Exactly. This is what I wrote to Black Magic. You should be able to stream to the internet without having both PC/Mac and AMP connected to the same network (either through router). I have to bridge connection when I connected my AMP to my laptop direct without router before I was able to stream on to the internet. Shouldn't the AMP automatically use my laptop's internet when connected to it through Ethernet port. You wouldn't take the router to the field if you have to stream an event, would you?
@@ayodaramola7986 I take my own router so that I can control the network on site. All I need then is a network feed from the host LAN, and I'll know than everything within my portable LAN is pre-configured and ready to go.
Hi Alex, Thank you for all the helpful videos! I have my laptop and ATEM Mini Pro hard wired to my LAN as you suggested. I want to have a live ZOOM meeting, however, with this configuration ZOOM will not recognize the ATEM Mini Pro as the video and audio source. If I use the USB-C connector it will recognize the ATEM Mini Pro but then I lose the ATEM Mini Pro’s ability to record. Any work-arounds?
Really glad you're finding the videos useful :) You are correct. The ethernet port on the ATEM Mini only allows for control and does not send a video feed to your control device. The same applies for the ATEM Mini Pro, except it uses the internet connection you provide via the ethernet port to live stream at an RTMP destination. So, with that being said, you're correct that for something like ZOOM you would need to use the USB-C as a webcam output, and therefore can't record from the USB-C at the same time sadly. BUT, you could run something like OBS on that same computer and record the feed in that! Re Workarounds - I wonder if you you to live stream from the ATEM Mini Pro via RTMP to an RTMP Server running on your computer, and then use a virtual webcam to get that into Zoom. It's total overkill and I wouldn't recommend it, because USB-C would be easier...but it might work!
@@AlexPettitt I got it to work in a round about way. I have the USB C out of the ATEM Mini Pro going into the Mac USB-C. The second port from the Mac (sadly it only has two ports) has a USB C multi port adapter. Plugged into the adapter I have the AC charger, and USB 3 to ethernet to the LAN. When I launch ZOOM it now recognizes the ATEM Mini Pro video and audio. I have a second laptop going into the ATEM Mini Pro (HDMI 2) running a Keynote presentation. As you said I still can’t record directly from the ATEM Mini Pro but I can record into ZOOM. Thanks again Alex!
I love your videos; they are incredibly helpful. I've often wondered though, why you don't do something more to prevent all the plosives throughout your videos. Every other aspect of your videos are perfectly done except that. At any rate, LOVE what you are doing - thanks so much for doing it.
Thanks for the comment and really glad you're enjoying the videos. Funny you should mention that, it's been really bugging me too lately, so I'm going to be trying a few new mic setups going forward :) The Rode NT-USB is a fantastic mic, think I might just need to add a foam shield to it to try and reduce lose plosive sounds :)
Very helpful information. Thank you. I have a problem I do not know whether you can help? I have two Canon EOS Rebel cameras - SL3 and T5. I have a problem with the Face Detection box just showing on the video in the ATEM Mini Pro - spoiling the output. Do you know HOW I can totally get rid of that box on the output video?
Hi Alex, Great channel, its really been helping me out alot with my camera network but am having a few issues pulling up my network cameras in OBS without an Atem Mini switcher. Also am considering getting an Atem Mini Pro, I see you connected yours in this video without connecting any HDMI cables, will that setup allow me to operate my cameras on the network? Hoping you can help me.
Dear Alex, thank you for your valuable guidance. I'm a Canon user and with extreme regret only after buying the Mini Pro I realized that the two Rebel T3i (Magic Lantern installed for clean Hdmi out, but video output with crop) and even the 6D mkII (No clean Hdmi) do not work properly with the Mini Pro. Now I have to buy proper cameras. I wonder if it makes sense for streaming to switch to Blackmagic 6K or if with two Canon Eos RP I could use all my lenses and spend the right amount. I'd like to have a video that explains in more detail the multiview and any interventions we can do on this part of the software.
Alfio, double check what camera mode you are in, it sounds like you might be in photo mode. I was pretty sure Canons are able to do full clean 1920x1080p output from the HDMI
But, to answer you question the Blackmagic PCC6K would be a great fit for you as it has a canon EF mount, so you should be able to use your existing lenses
Alex Pettitt It does work with Canon. I have a 7 year old 700D and it does export clean HDMI in HD through the HDMI cable, however with black bars top and bottom... working on it...
I do have a question I downloaded the software control on my laptop and ran an Ethernet cable from my router to my ATEM mini and my laptop, so everything is running from the same network, when I went to connections on my software my ATEM mini did pop up but when I hit connect the software says no device found ?
@@colossians1_27 because I do not have any hdmi cameras, I only have 2 zoom q2n 4K cameras- I could not figure out how to use the ATEM mini with them I tried extender cables converting Mico usbc to hdmi - plus I tried to use my laptop by connecting hdmi to hdmi uhg
hey there, thanks for these instructions, great short and to the point tutoprial. I just bought the ATEM mini ISO and trying to connect it! My Question is does is it necessary for both the ATEM and laptop to be connected via ethernet, or can the ATEM be on Ethernet and Laptop on the wireless network? Right now this is how I have it connected and I do not see anything in the ATEM connection panel (both manual IP address and ATEM switchers list underneath is empty.. any help from anyone is welcome. thanx
Hi sir. I like your video. I am learning about atem mini and you explained it very well. Just have a question, do you really need the internet connected to atem mini.l evenn if you have internet on you laptop. I am planning to use the atem mini buttons. Thanks
Thanks for your video. I have a question: I don't have access to an ethernet cable nearby so, can i directly connect to a PC, then make some setting changes, then disconnect the PC then connect a SSD to record? will it keep the settings after disconnecting the PC?
Now if you connect it over ethernet, not USB to the computer, can you use software like Wirecast to see it as a camera source if you want to use Wirecast as the streaming app? Or to see the ATEM Mini Pro as a camera source for the likes of Wirecast do you have to use the USB connection to the computer? Thank you!
Thank you for all the helpful content you make. I’m wondering this. Example, you want to take the ATEM Mini Pro and Hyperdeck Mini to an event that only has WiFi. How do you hardware the devices to a network where you only have access to the WiFi and not the router itself? Many thanks!
I can’t find the video but you have a video that you use a usb-c to ethernet adapter and use your computers WiFi. I’m trying to do that and my atem connects fine, I see it in the atem control software but when I hit go live the on air button flashes red which usually means network issue. Any experience with that or know how to fix? I have gone into my settings and enabled WiFi sharing as well.
Hey Alex, GREAT work.Thank you. I remember you mentioning a specific hub that you used to allow the ATEM to record the program output while passing the USB-C into the laptop so programs like Zoom can still see the ATEM as a webcam. Where can I get that? None of my hubs work. Either the HD is visible in Software Control but the ATEM is not visible in Zoom, or the reverse happens where the HD mounts to the desktop and SC cannot see the HD! Any advise would be much Appreciated!
What's the answer? I have this issue too. I want to use record the program and use the USB-C to send the program feed to a computer so Zoom can see the ATEM as a webcam.
Hi from Puerto Rico! I learn this from you some month ago and now I can use the USB from the Atem Mini Pro to record in a SSD drive and can use an Atem Streaming Bridge to hava an extra HDMI OUT for other things. However, I try to do this same network using a ATT Netgear HotSpot (that has a LAN connector) instead the home router and does not work. I want to have the option to creat a network on location. Is that possible?
regarding the network connection via ethernet from the router to the atem: why does the laptop needs to be connected to the router via cable so the software can recognize the atem? Shouldn´t be the wifi-connection to the laptop be sufficient since both machines are on the same IP this way already?
Alex! Was wondering if you had any insight on adding ethernet cameras on the network to Atem Mini camera inputs as sources that are switchable. Thanks for your help and insight!
Great video! It worked wired and wirelessly, but i am not getting no internet connection nomore. My switch is getting internet from my router so im trying to figure out why it isnt working. Or its not possible to do this along with getting internet connection?
Once I've setup the Atem mini pro iso on the network switcher can I connect NDI cameras to the switcher and connect/control them without using the hard wired HDMI inputs
Hey Alex, great video thank you. Atem mini pro on the network and a client with one computer who wants to be able to use the control software and program view. Possible?
Using ethernet instead of USB-C, does it recognize the Atem as an external webcam... for using in a Skype or Zoom call? Thanks for the vídeo... much clear using a switcher!!!
Hey good question. Unfortunately not, the ethernet port on the ATEM Mini only allows for control and does not send a video feed to your control device. The same applies for the ATEM Mini Pro, except it uses the internet connection you provide via the ethernet port to live stream at an RTMP destination. PS Glad you liked the video!
Like your videos, very clear and concise. You should do a video on how to live stream with the mini pro, and make it clear that this is the main difference between the mini and mini pro's ethernet port. The plain mini will not live stream on ethernet
4:27 Atem Mini shows but does not connect. ATEM and Mac Book (Pro M1) are connected to the same network via Ethernet (no Wifi). An ideas for trouble shooting?
LOVE your videos friend. Since you're asking for video suggestions, I'm wondering if you could make a SUPER simple for absolute beginners, best practices kind of video.
You can add four HDMI Embedders which gives you 6 stereo Audio inputs or four mono + 4 stereo inputs. In combination with one of the cheap multichannel Behringer mixers with line out option it is not only a pretty powerful little camera switcher but also a powerful audio tool.
The Black Magic connected to Canon 800d any help connecting the devices and will different cannon cameras like 800d and 750d work with the mini at the same time please ...
can you use the webcam posibility of the atem on your macbook, when it‘s connected over the lan cable to your network. and use then the usb-c port on the atem to record on an external ssd drive?
Hi alex I have the atem mini and I wanted to set it up through obs I tried to do this following your video but I'm getting nothing at all ? 2 webvam cameras and a soundsource from my dj controller but no sound and no picture? If I use the webcam on there own and my soundsource direct into my laptop all work fine! Obviously it must not br setup properly but I'm not having any luck at all....can you help? 😢
Any way to use the atem as a webcam througgh Ethernet? Or does it have to be the usb c to see it in OBS. And can you stream with it but also use it as a webcam
Thanks for the content! I have an Atem Mini and will be connecting it via my local network. Do I still need the usb connection for streaming software like vmix?
How can I see the multi camera view on the Mac book ?! Do I need to use a separate Mac book for it ?! Or can use the same one for the software control as well as multi view ?
Two main season I recommend using the network for control rather than USB-C: 1) Flexibility and redundancy as with the network you can have multiple devices control the ATEM at once. 2) For ATEM Mini Pro users, it free's up the USB-C port for recording to an external hard drive. I really hope this video has helped! Any questions, just put them below :)
@@Snailmale7 There is, but it would require taking the HDMI output from the ATEM Mini Pro into a capture card on another computer and then bringing that into something like Zoom for example. Bit janky, but would technically work
@@AlexPettitt I wonder if there's a device you can get that would take that feed and broadcast it over the network? Kinda like via NDI. Maybe that could work. Or maybe create a video feed visible over a web browser through say "[your IP]/ndi.html" - any ideas on those?
Thank you, Alex. I learn a lot from you videos recently. I am using ATEM Mini Pro with the ethernet. The connection was good, but when I tried to do UA-cam livestream, it still remained as offline. I am using Window 10. Using it with Macbook Pro has no problem though.
The device you use to control the ATEM Mini Pro with will have no impact on the RTMP stream output as this is handled on the ATEM Mini Pro itself. So I’d say the issue may be with your internet’s upload speed or your live stream settings maybe? Hope this helps
Thanks @AlexPettitt for this. I've tried the workflow with my AMP ISO and is working but I can't connected to OBS via ethernet, and I need the usb to record the ISO channels. Any tip on how to connect the atem mini pro iso via ethernet to obs? thanks
The Atem doesn't like some computers and the program has a flicker when the computer is switched to . Can I use ethernet from the computer to have a full screen on the Atem without the flicker? thanks in advance!!
I'm struggling with the ethernet connection. (1) I have an unmanaged Netgear switch but can't connect; i don't really want a router because someone else is leading the Zoom Meeting on their laptop, (2) does it need to use CAT 6? thank you
There is POE splitter and power that is connected to POE switch... can i use that and power the ATEM with it instead using the power supply adapter? ...
Have you tried using laptop internet to use to live stream? Also have you tried using the phones internet to hotspot on laptop then using the atem to stream?
Do you have any recommendation to be able to connect long distance cameras to the Atem mini? We're struggling with hdmi long cables. The Atem just detect 1 50ft hdmi cable.
I was wondering if I could direct connect from the Atem Mini Pro Ethernet port to a USB Ethernet adapter to my MacBook Pro. I was shocked I could do this and the Software Control recognized it. Frees up my USB C port on the Atem for a SSD for recording.
I play Drums and do multicam. So can I just connect a SanDisk SSD Eternal drive to the Atem mini pro iso directly ? Then after recording my drum song, disconnect the SanDisk drive from ATEM , then connect SanDisk to my Apple M2 Mac Mini to use Black Magic software to edit my angles , etc ?
Hello Alex I'm new to streaming. My ATEM Mini Extreme Iso works ok at home with my router, but I did a test at a customer site and could not connect to their network. I had the ATEM, and Macbook Pro all connected through a switcher to their network and we accessed the network from my Laptop entering the network details with password. Can you advise on the correct way to do this? Many thanks Peter
Alex, fantastic video, one of the best I've seen . You obviously know your stuff and you articulate it very well, congrats! My question is a bit off topic, so no pressure if you can't answer, but I'd be interested to know your thoughts about hardware switchers (like the ATEM Mini Pro) versus a software solution like vMix, for example. Any insights you may have would be greatly appreciated, cheers mate!
Is there anything you have to do in the network settings? Also, if you are not at home or location with a dedicated router, could you use a hotspot that has an Ethernet port in place of the router? Thank you. Your video was very informational and much needed. I did a search just to get this information. The diagram you had was also five star.
Ok this is great but... If I don't need an Internet connection and I want to connect straight computer to ATEM to control through the software and have the usb c port recording to an external hard drive, can I do that? If yes how? I tried but didn't work. I need to record an orchestra and I will not have the need of internet to bring my router. In the other had, if this just work that way, can I use the router just for connection even if doesn't have internet? Thanks!!!
Alex RE: 4:08 I had 3 locations where the automatic DHCP saw and connected to the control software. But I had one location that didn't see it, how do I get that manual IP - ive not got it to work when it doesn't see the device name. Is it my computer's IP address or the AMP address I need to imput. How do I get the proper IP number. Is there a standard IP number I should be typing in.
Alex, thanks for your vídeos. I conect the atem to the router but i cant see it in my laptop thru wifi, it is necessary to connect both atem and laptop by cable to a Network switch?
Hi. My setup is the same as yours , but with Desktop/windows 10. I use a streaming service (StreamYard). It seems that if we Bring up streamyard it recognizes the blackmagic fine. I there are not issues. However (on same computer)if I then start the ATEM PRO software it steps on the Streamyard connection and I get something like rolling video as if the configuration has been hosed. Nut if start the ATEM MINI Pro software on a separate computer there are no issues with my streaming connection. Any suggestions?
Is it possible to use ethernet port as webcam in pro version? I want to use usb c port for recording and ethernet as webcam for streaming via computer app.
Hey Alex, I've recently bought the ATEM Mini Pro and I'm loving your videos, including the one on adding graphics. One thing that I'd love to understand better (and see a video on) is upstream vs downstream, DVE, why is the Stinger greyed out - and can it be used, and generally using 'native' graphics (rather than with Singular Pro) as I've been hitting some snags when trying to use PNG or TGA files with alpha channels.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
You rock! there are lots of videos on YT that suggest how to live stream to UA-cam, but none show how to connect ATEM to network! the most important part!
Short, simple to understand video. Brilliant
I've come to the party a little late, Alex, but finding your series on the ATEM Mini / Pro super useful, especially the level of detail, clarity and tying up loose ends. You mention using mobile apps as software controllers, also mobiles over wifi. I wonder if you could do an episode specifically on this topic?
I'm even later, but I second this!!! I guess I should search first though huh?! Dooooh!
Thank You, awesome job. One thing that stood out, using diagram to explain is powerful. Thanks
This is really helpful feedback. Thanks!
Your the best man I’ve sit here already and watch 5 of your videos very very interesting
This is really helpful! So in theory, instead of buying the network switch, can I just use my orbi router which has multiple ports to do everything you are doing? You only are using the switch to allow for one less cable running across your desk is that correct?
Hey Matt, yes if your router has multiple Ethernet ports in it, just connect one up to your ATEM and then other to your computer. Or connect one to your ATEM and then connect your Mac/PC via WiFi to your router. Both will work fine, and you will be able to control your ATEM over the network :)
Great work! Your video is 100% more informative than black magics videos and websites combined. Thank you!
Thank you. I've watched about 10 videos on this hookup and this was the first I understood.
Awesome video! Straight to the point, organized, and simple👍Well done sir
I like I like!!! The option to use many devices to control it is extra cool, having a wireless option but phone is dope if doing solo live and setting up away from the computer setup is fantastic.
Nicely done. I actually got it worked out prior to watching but your presentation is EXCELLENT.
exactly what I needed to know...whew! took a while to get here :)
Great video Alex, but our church uses ProPresenter-7 on a iMac in another room. How do I get the Atem’s final Broadcast into the ProPresent-7??? Thanks
Luv to see a quick video like this expanded to live stream hook up AtEM mini pro...FB and YT
I have the same chair in orange! Excellent tutorial! Now all that I've got to do is find an ATEM Mini Pro in stock somewhere.
Did you mean spliter or swither?
And what is the different between getting network via ethernet cable direct from the router or modem and do the network from a swither or spliter?
Alex.. your vids are truly great. Thanks!
Thanks very much...appreciate that a lot 🙌
You take the time to fully explain things, then often expand on concepts. We old guys need this!
That was a great breakdown. Thanks for that.
At last, a worthy instructional video on setting up the Ethernet/network side of things. I actually returned my AMP, as I thought it was faulty, and it may well have been. I received my new one today and thought, 'let me check out that Alex P fella'. The one thing I didn't do was connect my Imac and macbook pro via Ethernet along with the AMP. The diagram made things much clearer. My only question, 'Shouldn't the AMP be able to connect to the internet via the ethernet without having the imac and macbook pro connected via ethernet cable?
Exactly. This is what I wrote to Black Magic. You should be able to stream to the internet without having both PC/Mac and AMP connected to the same network (either through router). I have to bridge connection when I connected my AMP to my laptop direct without router before I was able to stream on to the internet. Shouldn't the AMP automatically use my laptop's internet when connected to it through Ethernet port. You wouldn't take the router to the field if you have to stream an event, would you?
@@ayodaramola7986 I take my own router so that I can control the network on site. All I need then is a network feed from the host LAN, and I'll know than everything within my portable LAN is pre-configured and ready to go.
Thank you Alex, I've really liked all your work, there's great value in your videos. Thank you so much.
your videos have been super helpful, nice work
Hi Alex,
Thank you for all the helpful videos! I have my laptop and ATEM Mini Pro hard wired to my LAN as you suggested. I want to have a live ZOOM meeting, however, with this configuration ZOOM will not recognize the ATEM Mini Pro as the video and audio source. If I use the USB-C connector it will recognize the ATEM Mini Pro but then I lose the ATEM Mini Pro’s ability to record. Any work-arounds?
Really glad you're finding the videos useful :) You are correct. The ethernet port on the ATEM Mini only allows for control and does not send a video feed to your control device. The same applies for the ATEM Mini Pro, except it uses the internet connection you provide via the ethernet port to live stream at an RTMP destination.
So, with that being said, you're correct that for something like ZOOM you would need to use the USB-C as a webcam output, and therefore can't record from the USB-C at the same time sadly. BUT, you could run something like OBS on that same computer and record the feed in that!
Re Workarounds - I wonder if you you to live stream from the ATEM Mini Pro via RTMP to an RTMP Server running on your computer, and then use a virtual webcam to get that into Zoom. It's total overkill and I wouldn't recommend it, because USB-C would be easier...but it might work!
@@AlexPettitt
I got it to work in a round about way. I have the USB C out of the ATEM Mini Pro going into the Mac USB-C. The second port from the Mac (sadly it only has two ports) has a USB C multi port adapter. Plugged into the adapter I have the AC charger, and USB 3 to ethernet to the LAN. When I launch ZOOM it now recognizes the ATEM Mini Pro video and audio. I have a second laptop going into the ATEM Mini Pro (HDMI 2) running a Keynote presentation. As you said I still can’t record directly from the ATEM Mini Pro but I can record into ZOOM. Thanks again Alex!
I love your videos; they are incredibly helpful. I've often wondered though, why you don't do something more to prevent all the plosives throughout your videos. Every other aspect of your videos are perfectly done except that. At any rate, LOVE what you are doing - thanks so much for doing it.
Thanks for the comment and really glad you're enjoying the videos. Funny you should mention that, it's been really bugging me too lately, so I'm going to be trying a few new mic setups going forward :) The Rode NT-USB is a fantastic mic, think I might just need to add a foam shield to it to try and reduce lose plosive sounds :)
Thanks for your videos man ! They helped me a lot !! 😭
Very helpful information. Thank you. I have a problem I do not know whether you can help? I have two Canon EOS Rebel cameras - SL3 and T5. I have a problem with the Face Detection box just showing on the video in the ATEM Mini Pro - spoiling the output. Do you know HOW I can totally get rid of that box on the output video?
Hi Alex,
Great channel, its really been helping me out alot with my camera network but am having a few issues pulling up my network cameras in OBS without an Atem Mini switcher.
Also am considering getting an Atem Mini Pro, I see you connected yours in this video without connecting any HDMI cables, will that setup allow me to operate my cameras on the network?
Hoping you can help me.
Thanks for this. I'm interested in trying to connect an iPhone wirelessly to the Atem to use as a camera. Is this possible do you think?
Dear Alex, thank you for your valuable guidance. I'm a Canon user and with extreme regret only after buying the Mini Pro I realized that the two Rebel T3i (Magic Lantern installed for clean Hdmi out, but video output with crop) and even the 6D mkII (No clean Hdmi) do not work properly with the Mini Pro. Now I have to buy proper cameras. I wonder if it makes sense for streaming to switch to Blackmagic 6K or if with two Canon Eos RP I could use all my lenses and spend the right amount. I'd like to have a video that explains in more detail the multiview and any interventions we can do on this part of the software.
Alfio, double check what camera mode you are in, it sounds like you might be in photo mode. I was pretty sure Canons are able to do full clean 1920x1080p output from the HDMI
But, to answer you question the Blackmagic PCC6K would be a great fit for you as it has a canon EF mount, so you should be able to use your existing lenses
Alex Pettitt It does work with Canon. I have a 7 year old 700D and it does export clean HDMI in HD through the HDMI cable, however with black bars top and bottom... working on it...
I do have a question I downloaded the software control on my laptop and ran an Ethernet cable from my router to my ATEM mini and my laptop, so everything is running from the same network, when I went to connections on my software my ATEM mini did pop up but when I hit connect the software says no device found ?
@@colossians1_27 I found out that my ATEM mini will not work properly with a Windows 7 Pc uhg
@@colossians1_27 because I do not have any hdmi cameras, I only have 2 zoom q2n 4K cameras- I could not figure out how to use the ATEM mini with them I tried extender cables converting Mico usbc to hdmi - plus I tried to use my laptop by connecting hdmi to hdmi uhg
hey there, thanks for these instructions, great short and to the point tutoprial. I just bought the ATEM mini ISO and trying to connect it! My Question is does is it necessary for both the ATEM and laptop to be connected via ethernet, or can the ATEM be on Ethernet and Laptop on the wireless network? Right now this is how I have it connected and I do not see anything in the ATEM connection panel (both manual IP address and ATEM switchers list underneath is empty.. any help from anyone is welcome. thanx
Hi sir. I like your video. I am learning about atem mini and you explained it very well. Just have a question, do you really need the internet connected to atem mini.l evenn if you have internet on you laptop. I am planning to use the atem mini buttons. Thanks
Perfect work 👍. can i connect the mini pro from ethernet to type c of mobile phone with some adapter? I want the type c free to record in ssd. Thanks
Really straightforward and helpful, thanks
Thanks very much helping me the setup. Excellent content.
Thanks for your video. I have a question: I don't have access to an ethernet cable nearby so, can i directly connect to a PC, then make some setting changes, then disconnect the PC then connect a SSD to record? will it keep the settings after disconnecting the PC?
Now if you connect it over ethernet, not USB to the computer, can you use software like Wirecast to see it as a camera source if you want to use Wirecast as the streaming app? Or to see the ATEM Mini Pro as a camera source for the likes of Wirecast do you have to use the USB connection to the computer? Thank you!
Thank you for all the helpful content you make. I’m wondering this. Example, you want to take the ATEM Mini Pro and Hyperdeck Mini to an event that only has WiFi. How do you hardware the devices to a network where you only have access to the WiFi and not the router itself? Many thanks!
Thank you Alex, this help me solved the issue too
I can’t find the video but you have a video that you use a usb-c to ethernet adapter and use your computers WiFi. I’m trying to do that and my atem connects fine, I see it in the atem control software but when I hit go live the on air button flashes red which usually means network issue. Any experience with that or know how to fix? I have gone into my settings and enabled WiFi sharing as well.
Brilliant excellent run through
It solve the issue I have been battling with for about three weeks. Thanks Alex
Really glad this helped!!
This helped a lot, thanks!
Thanks for helpful demo. Lot's more flexibility with Network set up.
Hey Alex, GREAT work.Thank you. I remember you mentioning a specific hub that you used to allow the ATEM to record the program output while passing the USB-C into the laptop so programs like Zoom can still see the ATEM as a webcam. Where can I get that? None of my hubs work. Either the HD is visible in Software Control but the ATEM is not visible in Zoom, or the reverse happens where the HD mounts to the desktop and SC cannot see the HD! Any advise would be much Appreciated!
What's the answer? I have this issue too. I want to use record the program and use the USB-C to send the program feed to a computer so Zoom can see the ATEM as a webcam.
@@nancyandrews7429 I don't think this is possible which is really annoying as I brought the ISO on the assumption I could do this.
I been researching for 6 hours before I buy.. doesn't look like the hardware supports USBC recording & PC connection at the same time at this stage
Hi from Puerto Rico! I learn this from you some month ago and now I can use the USB from the Atem Mini Pro to record in a SSD drive and can use an Atem Streaming Bridge to hava an extra HDMI OUT for other things. However, I try to do this same network using a ATT Netgear HotSpot (that has a LAN connector) instead the home router and does not work. I want to have the option to creat a network on location. Is that possible?
regarding the network connection via ethernet from the router to the atem: why does the laptop needs to be connected to the router via cable so the software can recognize the atem? Shouldn´t be the wifi-connection to the laptop be sufficient since both machines are on the same IP this way already?
I have the same question?
Alex! Was wondering if you had any insight on adding ethernet cameras on the network to Atem Mini camera inputs as sources that are switchable. Thanks for your help and insight!
Hey Raymond, sadly this isn't a feature with the ATEM Mini yet. You're only able to bring cameras in over HDMI / SDI at this time. Hope this helps
Great video! It worked wired and wirelessly, but i am not getting no internet connection nomore. My switch is getting internet from my router so im trying to figure out why it isnt working. Or its not possible to do this along with getting internet connection?
Once I've setup the Atem mini pro iso on the network switcher can I connect NDI cameras to the switcher and connect/control them without using the hard wired HDMI inputs
Hey Alex, great video thank you.
Atem mini pro on the network and a client with one computer who wants to be able to use the control software and program view. Possible?
Using ethernet instead of USB-C, does it recognize the Atem as an external webcam... for using in a Skype or Zoom call? Thanks for the vídeo... much clear using a switcher!!!
Hey good question. Unfortunately not, the ethernet port on the ATEM Mini only allows for control and does not send a video feed to your control device. The same applies for the ATEM Mini Pro, except it uses the internet connection you provide via the ethernet port to live stream at an RTMP destination.
PS Glad you liked the video!
@@AlexPettitt I am having a problem with this. Could you please walk through for me on this. Thanks Alex
Like your videos, very clear and concise. You should do a video on how to live stream with the mini pro, and make it clear that this is the main difference between the mini and mini pro's ethernet port. The plain mini will not live stream on ethernet
4:27 Atem Mini shows but does not connect. ATEM and Mac Book (Pro M1) are connected to the same network via Ethernet (no Wifi). An ideas for trouble shooting?
Great Video and Explanation. May I ask what the tool for the presentation (mind map) you used was?
LOVE your videos friend. Since you're asking for video suggestions, I'm wondering if you could make a SUPER simple for absolute beginners, best practices kind of video.
You can add four HDMI Embedders which gives you 6 stereo Audio inputs or four mono + 4 stereo inputs. In combination with one of the cheap multichannel Behringer mixers with line out option it is not only a pretty powerful little camera switcher but also a powerful audio tool.
The Black Magic connected to Canon 800d any help connecting the devices and will different cannon cameras like 800d and 750d work with the mini at the same time please ...
can you use the webcam posibility of the atem on your macbook, when it‘s connected over the lan cable to your network. and use then the usb-c port on the atem to record on an external ssd drive?
I can see the ATEM mini listed on the software, but it won't connect to it as you show in the video. Any thoughts or fixes.
Does one need a network switcher to power this whole setup effectively with ethernet? and if so, which network switcher do you recommend?
Hi alex I have the atem mini and I wanted to set it up through obs I tried to do this following your video but I'm getting nothing at all ? 2 webvam cameras and a soundsource from my dj controller but no sound and no picture? If I use the webcam on there own and my soundsource direct into my laptop all work fine! Obviously it must not br setup properly but I'm not having any luck at all....can you help? 😢
Any way to use the atem as a webcam througgh Ethernet? Or does it have to be the usb c to see it in OBS. And can you stream with it but also use it as a webcam
I was about to ask the same question
Thanks for the content! I have an Atem Mini and will be connecting it via my local network. Do I still need the usb connection for streaming software like vmix?
How can I see the multi camera view on the Mac book ?! Do I need to use a separate Mac book for it ?! Or can use the same one for the software control as well as multi view ?
Two main season I recommend using the network for control rather than USB-C: 1) Flexibility and redundancy as with the network you can have multiple devices control the ATEM at once. 2) For ATEM Mini Pro users, it free's up the USB-C port for recording to an external hard drive. I really hope this video has helped! Any questions, just put them below :)
Thank you !!!
Quick question ? Is there an a way to view Multi-view through an app via the Internet ?
@@Snailmale7 There is, but it would require taking the HDMI output from the ATEM Mini Pro into a capture card on another computer and then bringing that into something like Zoom for example. Bit janky, but would technically work
Alex Pettitt Thanks ! I’ll stay with plan A - hdmi into a TV
@@AlexPettitt I wonder if there's a device you can get that would take that feed and broadcast it over the network? Kinda like via NDI. Maybe that could work. Or maybe create a video feed visible over a web browser through say "[your IP]/ndi.html" - any ideas on those?
Thank you, Alex. I learn a lot from you videos recently. I am using ATEM Mini Pro with the ethernet. The connection was good, but when I tried to do UA-cam livestream, it still remained as offline. I am using Window 10. Using it with Macbook Pro has no problem though.
The device you use to control the ATEM Mini Pro with will have no impact on the RTMP stream output as this is handled on the ATEM Mini Pro itself. So I’d say the issue may be with your internet’s upload speed or your live stream settings maybe? Hope this helps
Much appreciated Alex, great explanation thanks
Hi, is there a way to get the Atem Mini Pro iso into OBS over the network connections. Thanks
@alex pettitte
Hi I like your video, please can you send me a link to the lights you used in the background.
Thanks in advance
Thanks @AlexPettitt for this. I've tried the workflow with my AMP ISO and is working but I can't connected to OBS via ethernet, and I need the usb to record the ISO channels. Any tip on how to connect the atem mini pro iso via ethernet to obs? thanks
Will using the Ethernet cable method allow OBS to communicate with the ATEM mini PRO like the USBC method does?
The Atem doesn't like some computers and the program has a flicker when the computer is switched to . Can I use ethernet from the computer to have a full screen on the Atem without the flicker? thanks in advance!!
I'm struggling with the ethernet connection. (1) I have an unmanaged Netgear switch but can't connect; i don't really want a router because someone else is leading the Zoom Meeting on their laptop, (2) does it need to use CAT 6? thank you
There is POE splitter and power that is connected to POE switch... can i use that and power the ATEM with it instead using the power supply adapter? ...
Awesome video :) Can it be like this.... ATEM mini Pro is connected via Ethernet cable & your Macbook is connected to the router via wifi ?. Thanks :)
Great question
Looking to make this purchase and needing to know about connectivity with NDI devices over the network
Hi Patrick, it's not possible unless you look to purchase NDI to HDMI decoders. The ATEM Mini has no NDI capabilities built in. Hope this helps
great help thanks Dave
Have you tried using laptop internet to use to live stream?
Also have you tried using the phones internet to hotspot on laptop then using the atem to stream?
Hi Alex, thanks for the video! What ports does the ATEM Mini Extreme SDI use? Is it UDP9910?
Whoa! great.
Do you have any recommendation to be able to connect long distance cameras to the Atem mini? We're struggling with hdmi long cables. The Atem just detect 1 50ft hdmi cable.
Cheers (again) Alex!
I was wondering if I could direct connect from the Atem Mini Pro Ethernet port to a USB Ethernet adapter to my MacBook Pro. I was shocked I could do this and the Software Control recognized it. Frees up my USB C port on the Atem for a SSD for recording.
I play Drums and do multicam. So can I just connect a SanDisk SSD Eternal drive to the Atem mini pro iso directly ? Then after recording my drum song, disconnect the SanDisk drive from ATEM , then connect SanDisk to my Apple M2 Mac Mini to use Black Magic software to edit my angles , etc ?
Thanks Alex! which app do you use on iPhone to control the Mini Pro?
I'm pretty sure Strata can, although I will point out I haven't tested this yet...but I see no reason why it shouldn't
I use atemosc on the mac and TouchOSC on the iPhone. Works Fine.
Hello Alex
I'm new to streaming. My ATEM Mini Extreme Iso works ok at home with my router, but I did a test at a customer site and could not connect to their network. I had the ATEM, and Macbook Pro all connected through a switcher to their network and we accessed the network from my Laptop entering the network details with password. Can you advise on the correct way to do this?
Many thanks
Peter
Alex, fantastic video, one of the best I've seen . You obviously know your stuff and you articulate it very well, congrats! My question is a bit off topic, so no pressure if you can't answer, but I'd be interested to know your thoughts about hardware switchers (like the ATEM Mini Pro) versus a software solution like vMix, for example. Any insights you may have would be greatly appreciated, cheers mate!
Is there anything you have to do in the network settings?
Also, if you are not at home or location with a dedicated router, could you use a hotspot that has an Ethernet port in place of the router? Thank you. Your video was very informational and much needed. I did a search just to get this information. The diagram you had was also five star.
Ok this is great but... If I don't need an Internet connection and I want to connect straight computer to ATEM to control through the software and have the usb c port recording to an external hard drive, can I do that? If yes how? I tried but didn't work. I need to record an orchestra and I will not have the need of internet to bring my router. In the other had, if this just work that way, can I use the router just for connection even if doesn't have internet? Thanks!!!
Good video, well explained! Thank you!
Glad it was helpful! :)
Alex RE: 4:08
I had 3 locations where the automatic DHCP saw and connected to the control software. But I had one location that didn't see it, how do I get that manual IP - ive not got it to work when it doesn't see the device name.
Is it my computer's IP address or the AMP address I need to imput. How do I get the proper IP number.
Is there a standard IP number I should be typing in.
Alex, thanks for your vídeos. I conect the atem to the router but i cant see it in my laptop thru wifi, it is necessary to connect both atem and laptop by cable to a Network switch?
How is the Atem getting that Manual IP? How do we ensure that it is on the same subnet as the computer and router?
Hey Alex do you have any idea on the ATEM TV Studio HD and Strata Lite control? I do get my ATEM Mini Pro to work but the TV Studio just won’t budge!
Hi. My setup is the same as yours , but with Desktop/windows 10. I use a streaming service (StreamYard). It seems that if we Bring up streamyard it recognizes the blackmagic fine. I there are not issues. However (on same computer)if I then start the ATEM PRO software it steps on the Streamyard connection and I get something like rolling video as if the configuration has been hosed. Nut if start the ATEM MINI Pro software on a separate computer there are no issues with my streaming connection. Any suggestions?
Is it possible to use ethernet port as webcam in pro version? I want to use usb c port for recording and ethernet as webcam for streaming via computer app.
Thanks man! Great advice.
Thanks for the diagram! It really helped me quickly understand your setup! 🥳
Thanks so much for making my life easier. Such a clear and concise job! awesome explanation!
Hey Alex, I've recently bought the ATEM Mini Pro and I'm loving your videos, including the one on adding graphics. One thing that I'd love to understand better (and see a video on) is upstream vs downstream, DVE, why is the Stinger greyed out - and can it be used, and generally using 'native' graphics (rather than with Singular Pro) as I've been hitting some snags when trying to use PNG or TGA files with alpha channels.