How to install door latch and handle How to fit door handle and lock
Вставка
- Опубліковано 5 жов 2024
- Hi . This video is about how to fit a door latch and door handle in an interior door. Tools needed for this job: tape measure, pencil , flat drill bit for wood {size 25 }, electric drill, screwdriver. Hope it helps in your DIY projects. Please Subscribe Thanks
A nice tip I learned years ago when marking the face plate on lock and also the receiver, screw them on and use a Stanley knife to mark around the edges instead of the pencil. That way you get super accuracy and no need to chisel pencil lines, just clear out inside the Stanley lines. Same works great with hinges.. Nice work..
Nice prompt, thanks)
Also why not to cut latch and face plate while door isn't hanged yet?
Always do this very good
He didn't just butcher the door with the chisel because "you wont see it anyway" like most would, very careful and precise with the chisel, respect mate!
Brilliant video. Just bought a house that's a doer-upper. Everything is from the 70s - so having to replace doors and handles and such. Don't have the money for a pro, but I'm fairly handy with DIY. But had no idea how to put a door handle on! This video was a perfect demonstration! Thank you :)
Pretty much the same for me! I’m just doing things bit by bit one step at a time. We will get there
@@Alexander_l322how's it going now or have you finished
Same
Same....again! And mines from the 70s, too.
whole 12 minutes i was hooked up without ever once thinking of leave the video. if only movies could hook you that much 😃
Nicely done. I appreciated your attention to detail with the chisel.
Thanks you so much almighty Allah swt bless you brother!!!🤲🤲🤲
Brother, only Jesus saves. I pray that you may seek Him and find Him. GOD BLESS 🙌 🙏 ❤
Da vinci code
@@btbro5172😂 Jesus couldn’t save himself forget forget humanity ..
Thank you so much for the video. Very good demonstration, exactly what I needed!
Always love watching a pro do their thing!
Top tip - when you decide where you're going to put the fixings on the door - just check that where it's going to meet up with the catch plate on the frame there's not a bloody great knot!
Great job bro.. I'm confident watching this video that I can do the same ... never done it before, but I'm good with chissles ...
I'm so glad you showed the door closing afterward, just for - pardon the pun - closure xD Only the living room door in my new flat closes, so I'm looking at tweaking every other existing latch :P
You're simply the best. I love all your videos.
thank you for making this video, extremely useful!
Very informative and helpful video 👍🏻🇵🇱
Thanku for this video
I'm on my doors this week
Till this day we still look up things like this THANK YOU , Because I sure was just staring at this door knob 😂😂😂🤣🤣🤣
Easiest tutorial I’ve found! Thanks man🫡
Hi. Great stuff. Nice job. 👍. Thank you for sharing. 👌
Brilliant, thank you. 👍
Very good video.. explained well and as previous viewer said great clean work with the chisel
Nice.. Very comprehensive video. Thanks
Your the man, keep up the good work, thanks
Very good .now let's see if I can do !!😁
Brilliant just got to do this for my brother tomorrow.
Great. Wanted to see the chisel part
Many many thanks, very good instructions and nicely shown. 😎👍🏻👍🏻
Great demo 🙂
beautifully done how to video. thank you
Brilliant video, thanks!
Really nice video , thanks for taking the time to do these.
What size drill bit did you use for the hole for the handle?
dani ribero 20mm
Thank you so helpful us all.
Just what I need not know for this weekends door fest 😅
So helpful, thank you!
who knew sped up chiselling would be so satisfying to watch 😂
Use a trim router for my recessing of latch plates etc and I fit my door stops last, but nice video
Thanks you made it easy for me
Thanks for this, is there a reason why the curved part of the latch 'tongue' has to go on the side that closes?
Nice music soundtrack 😀
Nice tips
Thanks for sharing your knowledge mate 👍👍👍
Great video my friend. 👍
This is great video...thank you!
Brilliant informative video Thankyou!
I like ur tools
Good job 👍
Annoying how those latches have go so many curved corners, you'd think they would design them with square corners to make it easier to chisel. Good job though :)
Jamie Roberts that actually makes them easier to install in mass quantities, as you can make a jig and just use a small router, similar to radius hinges
nice guy nice video
Such a good video thanks for the help!
Really good
Good vid cheers mate
Very informative as always 👍
How do you keep your chisels so sharp?
It is a brand new chisel
@@how2d223 niemożliwe:)
Sharpen it when it gets blunt
thank you it was very interesting
Thank you
what about the spindle rod that goes in??
loved the video.
Thank God for you showing how to do this. May I suggest safety goggles and gloves next time. Don't want you hurting yourself in any way.
Cindy Mc Pherson ahahahaha
This gentleman is not english and that why he is not obsessed about health and safety.
I still don’t understand why the make these latches so wide that makes is more difficult to chisel out around the plate, or they should make the thickness of doors to a standard that will make it easier
Nooice!
А как на счет фрезера?
Bravo
You didn't mention the "Block" and to make sure it's on the correct side. Otherwise the handle screws do not have anything to grip!
👍👍👍
Gdzie masz kontownik.
There are many similar projects in Woodglut's plans.
Not that easy,the latch cover was thicker than the original so the handle didnt fit,so necessitated chiselling it larger.
You need to do the work more professionally.
I'd love to see it done professionally by yourself.
....waiting.🙄
freak
dude, awesome brilliant, simple, complete. thank you