6 years ago I started going to Florida for the winter's. One of the things I miss most is moving snow, cleaning up the woods and making bonfires. Hopefully you were using diesel to get the fire going and not gasoline. Happy New Year.
@@mikethetrucknut I haven't had it long, it's a generation 1, T1N, with the inline 5 turbo. It gets great fuel mileage, but it's cost me an arm and a leg to get going. Leaking injectors cost $4500 to fix. I'm hoping it'll pay itself off soon.
I’m sure you know this, but just a little shoveling in front of the cab and Kenny would have driven right out of there no problem. I’ve done what you did many times in Minnesota during the winter. Good to see the old boy moving again!
Great truck. Can you re-do the back end like you did with Stubby - air ride but very moderate stretch? That turned out really good. Is this the start of work to make room for a truck nest?
Does that have diff locks? I heard from a person that It's not "good" to engage the diff locks during a time your experiencing loss of traction. You should stop motion wheel axles vehicle slowly engage until u feel traction lock engage and then begin to attempt to move the vehicle with tl engaged. The person also indicated that spinning wheels on ice at extreme wheel speeds and then moving to a dry sold surface causing or resulting in the drivetrain or drivelive to stop suddenly in an instant was not good for the traction or differential locks. You being a Truck Expert//Nut was that an accurate statement ?😊
That is 100% accurate. If you put a locker in when ones spinning even a small amount it can break the shift fork. It's also not good to spin one wheel at a high rpm bec it can blow up the squirl cage. Usually see these failures in Alison autos when it's slippery bec drivers stand on it and spin the tires excessively
Seventy five now, started smoking around eight or nine years of age.... quit smoking on 21st of sept., this year. Feels strange not having that cancer stick in my mouth.... still reach for them but if ya quit, then dang it... QUIT or get off of the wagon. I feel a tad better but no cough or other issues. Cummins will usually start all the way down to our usa temps of zero to about ten.. fifteen below without either or other start aids. Lots of people have their favorite... Cat, or Detroit... Cummins, Mack. They all seem to be a lot easier as they improved over the years.... You just might need a woodmizer to cut some of your own boards for temp roofing... thats a hard game of its own. I see and listen to the news and hear them yelling for Trudeau to step down. Its a little late but if your tax situation did happen to take a huge step down, things might not look so bleak
Happy new year , mike and I can look at that truck all day Adeline it looked so cool man I love those trucks.You're here such a lucky man Well keep the videos coming and I'll keep watching happy new year Do you and your family and hope?You'll have a better year and twenty twenty five God bless you in your family❤❤😊😊😊😊 Your friend gypsy jim Detroit michigan
Lets get smokey done and out the into the new rear end in kenny you have two good drivers then shift that old peterbuilt on to someone else the money it cost to get done is it worth it in my opinion k 2 be a better option if the peterbuilt engine and other components can be used for it be the way if mine would be going that way have a go9d 2025 to
6 years ago I started going to Florida for the winter's. One of the things I miss most is moving snow, cleaning up the woods and making bonfires. Hopefully you were using diesel to get the fire going and not gasoline. Happy New Year.
You need to show Kenny more love he feels forgotten about. Happy New Year’s from New Jersey
Happy New Year. Definitely not forgotten when i drive by him everyday on my way to work 🤗
Happy New Year from Oz!!
GO Kenny!!
Happy New Year
HAPPY NEW YEAR MIKE, ANDREA and DAD! From Long Island!! Keep up the good work!!
Happy New year, thank you for the support it means alot. 🙏
happy new year 😊🎉
Happy new year
Happy New Years Mike! This is the year to fix all of your project trucks !!!!
Happy New Year
Nice tire spin! Happy new year from Finland!
Happy New Year
Happy New Year Mike, Andrea, Dad abd all the Others here!!!
Happy New Year
Love the way you bulldozer out of the snow. Happy New Year! Kenny is to nice to live out of door in the winter in his retirement.
Happy new year!
Great video. Mike always enjoy a cold start with Kenny. Happy New Year Mike, Andrea, Dad and Family.
Happy new year!
Happy New Year!
Happy New Year!
Happy New Years from Puerto Rico 🇵🇷
Happy New Year
Sounds good! Happy New Year!
Happy new year!
Now that looks like a fun carnival ride! Happy New years eve, Mike, Andrea, and dad.
Happy New Year's Eve to you too!
Happy new year to you and all of your family Mike.
Happy new year!
I love cold starts. It looks cold there today.
A little chilly
@@mikethetrucknut It's 20F here in Colorado today. My diesel Sprinter didn't want to start at all. Ha
@@ridethroughlifertl those sprinters are pretty awesome
@@mikethetrucknut I haven't had it long, it's a generation 1, T1N, with the inline 5 turbo. It gets great fuel mileage, but it's cost me an arm and a leg to get going. Leaking injectors cost $4500 to fix. I'm hoping it'll pay itself off soon.
She sounds great!! Happy New Year to you,your dad and your family!!
Happy New Year
Good truck
Happy New Years Mike! All the best to you and Andrea and family in 2025!
Happy New Year
Happy new year Mike and family and your dad
Happy New year 🎉
Mike, happy new year to you and your family! I'm hoping that 2025 will be a better year for everyone.
I hope so too
Happy New Year Mike and Family!
Happy New Year! 🎉
I’m sure you know this, but just a little shoveling in front of the cab and Kenny would have driven right out of there no problem. I’ve done what you did many times in Minnesota during the winter. Good to see the old boy moving again!
You are 💯 right
Sounds good for a cold start
Happy New Year to you, Dad, and Andrea 🥳🥳
Happy New Year
Did you spray some starting fluid in there before you started it
Nope.
Happy New Year from New Hampshire ..
Happy New year
Happy new year Mike
Happy New Year
Happy new year to you and your family Mike🎉
Happy new year!
Happy new year mike 😁 from the uk.
Kenny always sounds good on start up
Happy New Year
Great truck. Can you re-do the back end like you did with Stubby - air ride but very moderate stretch? That turned out really good. Is this the start of work to make room for a truck nest?
You betcha i have the diffs and suspension to get it done
Happy new year from Ontario my man
Happy New Year!
Happy New Year 2025 from Germany
Happy new year!
Happy New Year Mike
Happy New Year
Happy new year from Wisconsin
Happy New Year!
Happy New Year Mike🙂 Were down to 27drgrees here in eastern Oregon........cold😁
Yikes stay warm
Happy new year mike🎉🎉
Happy new year!
Does that have diff locks? I heard from a person that It's not "good" to engage the diff locks during a time your experiencing loss of traction. You should stop motion wheel axles vehicle slowly engage until u feel traction lock engage and then begin to attempt to move the vehicle with tl engaged. The person also indicated that spinning wheels on ice at extreme wheel speeds and then moving to a dry sold surface causing or resulting in the drivetrain or drivelive to stop suddenly in an instant was not good for the traction or differential locks.
You being a Truck Expert//Nut was that an accurate statement ?😊
That is 100% accurate. If you put a locker in when ones spinning even a small amount it can break the shift fork. It's also not good to spin one wheel at a high rpm bec it can blow up the squirl cage. Usually see these failures in Alison autos when it's slippery bec drivers stand on it and spin the tires excessively
Happy New Year! Cool trucks, great videos sir. Please dont let your dad live in some stupid bus.
He's wanting to travel again it's all good
Low and slow needs a new interior!
Seventy five now, started smoking around eight or nine years of age.... quit smoking on 21st of sept., this year. Feels strange not having that cancer stick in my mouth.... still reach for them but if ya quit, then dang it... QUIT or get off of the wagon. I feel a tad better but no cough or other issues.
Cummins will usually start all the way down to our usa temps of zero to about ten.. fifteen below without either or other start aids. Lots of people have their favorite... Cat, or Detroit... Cummins, Mack. They all seem to be a lot easier as they improved over the years.... You just might need a woodmizer to cut some of your own boards for temp roofing... thats a hard game of its own. I see and listen to the news and hear them yelling for Trudeau to step down. Its a little late but if your tax situation did happen to take a huge step down, things might not look so bleak
Put the chains on the tires
Happy new year , mike and I can look at that truck all day Adeline it looked so cool man I love those trucks.You're here such a lucky man Well keep the videos coming and I'll keep watching happy new year Do you and your family and hope?You'll have a better year and twenty twenty five God bless you in your family❤❤😊😊😊😊 Your friend gypsy jim Detroit michigan
Happy New Year Jim
Put on bricks underneath the tires stop that from recurring 4 inches thick every perfect for the truck's 😎😎😎
That's what a truck should look like and smell like on a cold start. You can't get that with
any of the newer trucks.
Rocking the truck out from its spot… can’t do that with an automatic. Sometimes us drivers have no choice but to drive those awful things. lol.
That baby needs some Rotela t6 in her
chain time
Typical Cummins
Lets get smokey done and out the into the new rear end in kenny you have two good drivers then shift that old peterbuilt on to someone else the money it cost to get done is it worth it in my opinion k 2 be a better option if the peterbuilt engine and other components can be used for it be the way if mine would be going that way have a go9d 2025 to
Yeah the 359 needs ALOT!