After pressing the 1,2,3 buttons three times I had to push the soil button to get me too 050 to start the reset process. Just thought you should know and thank you!
Thsnks! Had to.read the correction update on the Spin Speed button instead of the Cycle Signal button. Thus recalibration corrected an issue when i just wanted to spin dry the clothes without rinsing them.
You stated after the 123,123,123, process to hit Cycle Signal once an turn Dial to 050, but in the video you hit SPIN SPEED not Cycle Signal I am saying this because I hit the cycle signal first and nothing happened but then I went back and did it over again and I hit SPIN SPEED. Then I was able to turn the dial to 050 then the process continued.
1 of 3 problems Power supply problems unplug the unit for a couple of minutes that should reset itself. 2. Lid lock: make sure the lid lock is connected properly to ensure it is working properly if it is connected properly and still doesn't work replace it. 3. Inspect the temperature sensor make sure it is not damaged if so replace it.
Can take it all huh..? Anybody ever tell you that your a real life version of cleveland? Kinda.. lol. Sorry.. keep doing you dude.. wish i could figure out how to get into the business of appliance repair and reselling.. cant get any client base. But thats my dream i guess., that or an independent contractor remodeling bathrooms and kitchens myself.. cant build any client base.. i only got 4 or 5 people who have asked for big jobs and never get any calls back from them cus nothing ever breaks.. and guess their friends and family dont ever need anything done or they just dont tell em.. all of em were happy because i charged half of what any other company would have and kept all the detail in it.. dunno.. guess im just not lucky enough to get what i want.. never have.. good to see others doing it though..
Please help, my spin cycle isn’t working. I tried recalibrating but my options are E9 & F7. I smell an odor as well please help if you can I have the Kenmore Elite Quad Technology
Hi I went through the video and the 888 showed up 1x after multiple tries. I then lost it because it went over to an e2 but not 050. I tried again with multiple tries to redo things with no luck.
@@applianceflipper8590 Hi I do not know what's going on with my machine. I went through the three steps and I tried it with the correction, and I get the 888s but I cannot get it to calibration mode. By fiddling around with the buttons I was actually able to run the machine through a couple of cycles but then it just goes back to showing me the er and f6 code. It does kind of appear as though your video might have got me onto somewhat of a right track it think, but it is still not working right now.
I understand to unplug it 2 mins.. but then what, plug it back in ,then you hit the Power button ..it doesn't look like your blue light is on in your video.. I hit the 3 buttons and it doesn't do anything. if it does it just scrolls through the different settings.
The reason it didn’t work was that you need to unplug 2min do the 123,123,123 step (DONOT PRESS POWER BUTTON first or anytime ) then you’ll see 888 then press SPIN SPEED (NOT CYCLE SIGNAL) like he states and goes on to press spin speed the dial 050 and it will proceed
They're called inlet valves just turn off water valves hot and cold going to the washer unscrew the hoses going to the washer clean the valves the the hoses were screwed into. First use your hands to clean any debri then get a vacuum and suck the area off the screens.
After pressing the 1,2,3 buttons three times I had to push the soil button to get me too 050 to start the reset process. Just thought you should know and thank you!
Followed his instructions and was able to calibrate and reset our kenmore washer which works properly again. Thanks
Thsnks! Had to.read the correction update on the Spin Speed button instead of the Cycle Signal button. Thus recalibration corrected an issue when i just wanted to spin dry the clothes without rinsing them.
Your the only one that knows this ? Very good info saving me having to get another washer … again .
Very informative
YOURE AWESOME MAN THANK YOU!!!
My washer runs regular wash cycles for hours longer than its supposed to. Will this fix it?
Calibration? Do I need that after replacing the gearcases? I have some drops leaking at the bottom by rear legs.
Thank you for ur videos
Thank you for the information. Are the noises on the video part of the calibration process? Thank you
No this particular washer needs a washplate
Thanks for the video
You stated after the 123,123,123, process to hit Cycle Signal once an turn Dial to 050, but in the video you hit SPIN SPEED not Cycle Signal I am saying this because I hit the cycle signal first and nothing happened but then I went back and did it over again and I hit SPIN SPEED. Then I was able to turn the dial to 050 then the process continued.
Thank you Maria you are correct I noted that mistake in the description.
How can i do this if my washers power button keeps blinking with the f5?? Even when ive unplugged it 😣
1 of 3 problems Power supply problems unplug the unit for a couple of minutes that should reset itself. 2. Lid lock: make sure the lid lock is connected properly to ensure it is working properly if it is connected properly and still doesn't work replace it. 3. Inspect the temperature sensor make sure it is not damaged if so replace it.
Ur lid lock is faulty. Had the F5 error code and replaced it myself today costs like $50 off amazon for a new one. Fixed the problem right away!
My load failure got when clothes were in it, will it calibrate with those clothes still in?? Fix this for me, I'll show some love.
Can take it all huh..? Anybody ever tell you that your a real life version of cleveland? Kinda.. lol. Sorry.. keep doing you dude.. wish i could figure out how to get into the business of appliance repair and reselling.. cant get any client base. But thats my dream i guess., that or an independent contractor remodeling bathrooms and kitchens myself.. cant build any client base.. i only got 4 or 5 people who have asked for big jobs and never get any calls back from them cus nothing ever breaks.. and guess their friends and family dont ever need anything done or they just dont tell em.. all of em were happy because i charged half of what any other company would have and kept all the detail in it.. dunno.. guess im just not lucky enough to get what i want.. never have.. good to see others doing it though..
I somehow synchronized the washer in the video and the washer in my house to do the process at the same time😅
Please help, my spin cycle isn’t working. I tried recalibrating but my options are E9 & F7. I smell an odor as well please help if you can I have the Kenmore Elite Quad Technology
Hi I went through the video and the 888 showed up 1x after multiple tries. I then lost it because it went over to an e2 but not 050. I tried again with multiple tries to redo things with no luck.
I am getting a E1 F2 code, what dies it mean and do i press power button to exit
“Then you wanna tap cycle signal” *taps spin speed lol
Did again now I’m getting F2 and E1
Where is his link I need to buy parts and stuff
what if it doesn’t let you push anything because the F5 code keeps beeping
Im getting an er and f6 code and cannot get to 050.
Take a note of the correction I made in the description.
@@applianceflipper8590 Hi I do not know what's going on with my machine. I went through the three steps and I tried it with the correction, and I get the 888s but I cannot get it to calibration mode. By fiddling around with the buttons I was actually able to run the machine through a couple of cycles but then it just goes back to showing me the er and f6 code. It does kind of appear as though your video might have got me onto somewhat of a right track it think, but it is still not working right now.
@@timyoung5230 Good chance your board is bad.
Error codes F8 and E6 flashing! I need help?!?
What do you do after it’s done calibrating and u see the 3 8s???
Just power off thats it.
What does it mean when this washer stops mid cycle
if you can't calibrate then it could possibly be board problems.
It cuts off as soon as I do the steps. Also my washer stop filling water
Sounds like possible board problem.
Just like the Kenmore washer series 600 this video doesn't work
What’s the purpose of the calibration?
Sets it back to factory settings and re adjust washer when it gets out of whack.
I understand to unplug it 2 mins.. but then what, plug it back in ,then you hit the Power button ..it doesn't look like your blue light is on in your video.. I hit the 3 buttons and it doesn't do anything. if it does it just scrolls through the different settings.
The reason it didn’t work was that you need to unplug 2min do the 123,123,123 step (DONOT PRESS POWER BUTTON first or anytime ) then you’ll see 888 then press SPIN SPEED (NOT CYCLE SIGNAL) like he states and goes on to press spin speed the dial 050 and it will proceed
How do you clean the filter on this machine
They're called inlet valves just turn off water valves hot and cold going to the washer unscrew the hoses going to the washer clean the valves the the hoses were screwed into. First use your hands to clean any debri then get a vacuum and suck the area off the screens.
When I held cycle signal the 888 returned and a ding sounded
Did you see the correction I noted in the description?
My washer works the same after replacing parts, so I don't know what this Calibrates for. I did nothing and it work perfectly
My washer now throws 2 codes F5 and E3 and won’t do anything else?
Take a note of the correction I made in the description.
Mine won’t go into this mode it is completely dead no power no modes
Take a note of the correction I made in the description.
It doesn't show the 050
Did you red the correction?
I was able to follow the process but then it showed dr on screen with a sound like a small motor running
Possible clogged drain or drain pump
Thank you ! Is it easy to repair ? Also how much does it cost to have someone fix it ?
@@urielcampos685 What state are you in?
Doesnt work. Mine won't turn on anymore and customer support is a bunch of idiots.
Not working