I built a pair of saw horses using the metal things from the hardware store where you just cut your 2X4s and insert them. Doesn't fold and I want them to so I'll built new horses like yours. Nice, easy and better than what I have now.
Alphabeticalise in addition, genius, my mind has been regained at just the prospect🤣🤔Great video rich with tips & entertainment, what a great neighbour having Gandalf at hand.
Ok Tony I decided to build a set of your sawhorses.i spent 40 yers plus as a maintenance and Construction mill wright. I have to admit that by looking at your plan and completed product I’m impressed at the design.and after working my way through the process I wonder if you did this video for you and your buddy’s entertainment? I enjoyed working through the dimensions and watching the video many times to catch each location of the hinges and braces and details. But this is not for someone who is not stubborn there more complex than they look for location of the tips of the boards on the hinges what part to put on when and all I have to say is don’t be in a hurry and it could be the funnest but perhaps frustrating project. I have much more time on the first set than I saw coming just stopping and evaluating the next step. But all in all a very fun and rewarding project.
Thanks for your feedback Lance. Glad you got your sawhorses done but sorry to hear it was a complicated process. Did you use the plans and instructions provided with the link in the video description ?
Great! Simple construction without the need for large, expensive tools. Simple, readily obtained materials. Basic woodworking skills even I have. I think I'll make me a pair. Now, all I need is a source of doggy treat jars. 😉
I have several pairs of saw horses that I store hanging from the rafters in my garage. I am always afraid to get them down, cause as soon as a new horizontal surface appears junk collects on it and then I need to get another pair down. Nice looking saw horses though, good work!
Excellent design. One change I would make, the reinforcement piece on the hinge side (at 5:25 in the video) should be mounted on the inside face of the legs. That way the shelf is supported on both sides and not reliant on the hinges.
Hi Tony.I loved your sawhorses and will make a copy of they.Unfortunately I can't read/see clearly the dimensions at 03:00 minutes video.Can you help me please with this information? Thank You!
Hi Steve - Figure out the leg angle from the vertical (around 16 degrees), and use that to set the saw angle when cutting both the bottom and the top of each leg. HTH
Steve I just rewatched the video and noticed I mentioned "30 degrees"... that's the angle between the legs, so 15 degrees from the vertical for each cut.
@@ConnectVideo That was the only and the important thing to ask but somebody had asked early. So 75 degrees for cut and maybe 1 mmdistance chamfer to hide the hinges' circular bottom, right?
@@palio78ful yes Ahmet. Approximately 15 degrees. I say approximately because it can be a little more if you prefer, as long as you use the same angle for the tip and bottom of the legs, and adjust the width of the shelf accordingly.
I had a pair of those I made years ago, but they were just too heavy to lug around. There's another video here that shows the new ones I made, which are alot lighter and hold a couple tons, so they are strong enough for my work!
Comments from local woodworkers... 1. Thanks for the saw horse video. One detail not discussed was attaching the top to the legs. Was it just a screw through the top and into the top of the leg? A good video just the same. - Ron Response: Hi Ron - Yes, screws (and glue) connect the rail to the top of one leg at each end. And the other leg is attached via the hinge for each pair of legs. - Tony 2. Well done and very professional. You obviously used a tripod and the results are excellent. Great initiative. Cheers! - Roy 3. Terrific job. I'm very impressed, much better than most if the UTube stuff I watch. - Ken 4. I took the liberty of posting it on our Workers of Wood website. - Dan... workersofwood.com/viewtopic.php?p=2212#p2212 5. Excellent! Both the video and the sawhorses; well done You Guys. These videos you two are making are very entertaining and informative. Cheers, - Dan 6. Good job you guys! That was very well done. - George 7. Thanks Dan and Toni. Well done and very useful. - Tom 8. The video is EXCELLENT!! You two guys are pros!!!!!!!!!!! Cheers - Len 9. One word: Fantastic!! - Rick 10. Very good, Dan!!! - Brian 11. Thank you Dan and Tony, an excellent video. - Robert 12. Brilliant,.....well done you two !!!!!! - Tim
@@russellkendall7055 good question. I'd say that 350 lbs would be no problem, likely more... but haven't confirmed that. Would depend on the size of the item as well (i.e. if it was distributed across the top runners, and ideally close to or over the vertical supports. No problem with the legs spreading under load.
Clear instructions , great design. Thank you.
I built a pair of saw horses using the metal things from the hardware store where you just cut your 2X4s and insert them. Doesn't fold and I want them to so I'll built new horses like yours. Nice, easy and better than what I have now.
great project and design! Thank you for sharing.
Excellent design - I'm going to use it....
Alphabeticalise in addition, genius, my mind has been regained at just the prospect🤣🤔Great video rich with tips & entertainment, what a great neighbour having Gandalf at hand.
Thank you, this is very well done
Very well thought out design
Thanks Toni . Great Job help a lot
Fantastic love your attitude and skills there the best on you tube
I think that these are the best saw horses iv seen on UA-cam yet thanks kev
Thank you for this. It was excellent. And educational. I will co co build one.
Glad it was helpful! I will be posting sketches and instructions in the next day or two.
Ok Tony I decided to build a set of your sawhorses.i spent 40 yers plus as a maintenance and Construction mill wright. I have to admit that by looking at your plan and completed product I’m impressed at the design.and after working my way through the process I wonder if you did this video for you and your buddy’s entertainment? I enjoyed working through the dimensions and watching the video many times to catch each location of the hinges and braces and details. But this is not for someone who is not stubborn there more complex than they look for location of the tips of the boards on the hinges what part to put on when and all I have to say is don’t be in a hurry and it could be the funnest but perhaps frustrating project. I have much more time on the first set than I saw coming just stopping and evaluating the next step. But all in all a very fun and rewarding project.
Thanks for your feedback Lance. Glad you got your sawhorses done but sorry to hear it was a complicated process.
Did you use the plans and instructions provided with the link in the video description ?
Hi, great video. I’d love to make these. Can you share a cut list
Thanks. Working on detailed specs and sketch now… will post here when ready. Likely next week.
@@ConnectVideo That's great. Thank you!
That shelf is brilliant, thanks for sharing
Geat design! Thanks making these.😄
Great! Simple construction without the need for large, expensive tools. Simple, readily obtained materials. Basic woodworking skills even I have. I think I'll make me a pair. Now, all I need is a source of doggy treat jars. 😉
Very good working! It looks like i can do it too 😁! Thanks for sharing 👍
Great job!
Great idea for sawhorses, tnx for the tip! 👍
They are great thanks for the very good demo and instructions il make some soon
I have several pairs of saw horses that I store hanging from the rafters in my garage. I am always afraid to get them down, cause as soon as a new horizontal surface appears junk collects on it and then I need to get another pair down. Nice looking saw horses though, good work!
It was like Thunderbirds for older people without music just a squeaky door lol
thank you for sharing
Great video. Thanks
Good jobs 👍👍
you have a beautiful place..
Хорошая работа.
Спасибо.
Россия, Санкт-Петербург.
Good job.
Thanks.
Russia, St.Peterburg.
Excellent design. One change I would make, the reinforcement piece on the hinge side (at 5:25 in the video) should be mounted on the inside face of the legs. That way the shelf is supported on both sides and not reliant on the hinges.
That’s a good idea but it would mean the legs don’t fold right up against each other.
Hi Tony.I loved your sawhorses and will make a copy of they.Unfortunately I can't read/see clearly the dimensions at 03:00 minutes video.Can you help me please with this information?
Thank You!
This video is kind of fun...
Very nice set of sawhorses. Can you tell me the angle for bottom of legs. Thanks, Steve
Hi Steve - Figure out the leg angle from the vertical (around 16 degrees), and use that to set the saw angle when cutting both the bottom and the top of each leg. HTH
Steve I just rewatched the video and noticed I mentioned "30 degrees"... that's the angle between the legs, so 15 degrees from the vertical for each cut.
@@ConnectVideo That was the only and the important thing to ask but somebody had asked early. So 75 degrees for cut and maybe 1 mmdistance chamfer to hide the hinges' circular bottom, right?
@@palio78ful yes Ahmet. Approximately 15 degrees. I say approximately because it can be a little more if you prefer, as long as you use the same angle for the tip and bottom of the legs, and adjust the width of the shelf accordingly.
@@palio78ful the 1mm chamfer sounds about right too, but will leave that to your judgement.
I had a pair of those I made years ago, but they were just too heavy to lug around. There's another video here that shows the new ones I made, which are alot lighter and hold a couple tons, so they are strong enough for my work!
Link to the video...
Perfect fr small boat repairs but you have more shoes than Imelda Marcos. 🇦🇺🍺👍
Comments from local woodworkers...
1. Thanks for the saw horse video. One detail not discussed was attaching the top to the legs. Was it just a screw through the top and into the top of the leg?
A good video just the same.
- Ron
Response: Hi Ron
- Yes, screws (and glue) connect the rail to the top of one leg at each end. And the other leg is attached via the hinge for each pair of legs. - Tony
2. Well done and very professional. You obviously used a tripod and the results are excellent.
Great initiative. Cheers! - Roy
3. Terrific job.
I'm very impressed, much better than most if the UTube stuff I watch. - Ken
4. I took the liberty of posting it on our Workers of Wood website. - Dan...
workersofwood.com/viewtopic.php?p=2212#p2212
5. Excellent! Both the video and the sawhorses; well done You Guys. These videos you two are making are very entertaining and informative.
Cheers, - Dan
6. Good job you guys!
That was very well done. - George
7. Thanks Dan and Toni. Well done and very useful.
- Tom
8. The video is EXCELLENT!! You two guys are pros!!!!!!!!!!! Cheers - Len
9. One word: Fantastic!!
- Rick
10. Very good, Dan!!! - Brian
11. Thank you Dan and Tony, an excellent video. - Robert
12. Brilliant,.....well done you two !!!!!!
- Tim
Maybe I missed this one: What is the max weight can 'carry' on the horse?
@@russellkendall7055 good question. I'd say that 350 lbs would be no problem, likely more... but haven't confirmed that. Would depend on the size of the item as well (i.e. if it was distributed across the top runners, and ideally close to or over the vertical supports. No problem with the legs spreading under load.
Should have shown how you cut and put it together.
Gostei,vou fazer 🙏
I liked it, I will do it
Not to bad.
Hello Mr Tony why you no like to come in Africa to help and traine peaples by charity ?