How to install a graphics card with power cable adapter
Вставка
- Опубліковано 3 жов 2020
- How to install a graphics card with power cable adapter?
Installation of the PCI-E graphics card isn't difficult, but when you have an old power supply, you may run into the problem of missing the right connectors.
I my video I have shown how to solve the problem, I used the graphics card with an 8 pin power connector. You can use an adapter for Molex connectors that are in every PC. It's not the best solution; replacing the power supply is a much better idea, so do it if you can.
Adapters can be poor quality and so make sure that all Molex pins are well connected. It is a good idea to check that the connections between the Molex and the 8-pin connector are correct before you start the installation. I've heard that the computer was damaged when the cables were swapped in adapter.
------------------------------------------------------------------------------
Amazon USA:
amzn.to/3OceWuG
Amazon UK:
amzn.to/42IAW4Y
------------------------------------------------------------------------------
I'd love to hear your thoughts. Please comment, like and let me know what you'd like to see next.
Subscribe for the latest videos:
ua-cam.com/users/knemo?sub_confir... - Навчання та стиль
this is literally the only video i could find showcasing this thankyou
Hey man I have a question. Can you test the small 2 pin pcie cable if it shows voltage? Or resistance or anything like that. When I put in a Multimeter into both the pins i dont have any current. Great Vid!
thank you, the one person that can show the 2 molex pins into 1 8 pin connector, makes sense how it works now.
Great, thanks for watching
@@k-nemo i have 450 watt psu which has 2x moles pins can i use them to connect my gtx 1060 6gb with 2x 3pin molex to 6 pin pcie adapter.
please tell me
@@promovies9355 you need a better psu for that
@@promovies9355do you do that?
@@promovies9355did u do it?
Hey Man can i ask what type of psu you use at the videocard at the end?
danke man du hast mir echt geholfen, dachte man braucht unbedingt einen 8pin stecker aber ich sehe gerade du hast 1mal den 6pin stecker genommen und denn 2 pin stecker und das geht also auch , danke like und abo sind da. kuss
Lmao, when that molex pin fell out - I felt that... Molex is so crap 🤣
It's only a temporary solution
@@k-nemo Using that exact 2x molex to PCI-E adapter you used, could I fulfill a third 8 pin connector on an Asus Strix 3080 safely? (The other 2 8 pins will be single 8 pin PCI-E cables from the 2 VGA ports on my PSU)
P.S : It's a 750w PSU
I have a 480w psu with only one pci-e
Can I use the adapter to run rtx 3060 ti, or at least with limit?
Cara, você foi o único que conseguiu tirar minha dúvida. Muito obrigado!!!!!! Já deixei meu like!!!
Obrigado por assistir e deixar um comentário legal
Hi, so my gpu has 2x6pin as the 1st or 2nd gpu in your video, but my psu has 8pin cable, how can i find the adapter and where, pls help i can't find it on internet :c
I have 450W psu and i planning to get GTS450, is it safe to use the 2 molex to 6 pin ??
Hey I just bought a rx 6500xt but I don't have a external power cord.Any suggestions?
I have a p450B psu
Kann man für eine Grafikkarte einen Adapter mit von 6 auf 8 Pin verwenden?
Oder erschießt man damit die Grafikkarte?
Die Grafikkarte (GTX 1660 hat 8 Pin und das Kabel vom Netzwerk leider nur 6 Pin.
An dem Kabel mit den 6 Pin ist noch ein Nebenkabel mit 2 Pin angebunden….
Ist das für eine Grafikkarte mit 8 Pin vorgesehen?
Im late lol but would 2x molex to 8pin be ok for rx 480? I have a 560w psu.
My gtx 960 requires a 6pin which is connected to a 6pin to 2x4pin molex adapter. The problem is that my 4pin molex connects right into my Mainboard and not psu. Would that still work?
Do those piggytail half the power of the pcie like 75 to the one and 75 to to the other one? Then what if my gpu has only 8pin slot then it only uses 75 watts. Please answer me thanks
Cara, valeu em, tava com a dúvida e você foi o único que ajudou kkkkj obrigado viu!
Where do i find the vga cables in my pc
Bro, I have an Omega ax800.n 800w power supply and I want to use my RX 570, can I bought this adapter?
if you are here and don't have 6/8 pins in gpu, don't worry low gpu's does not have pins to connect to psu as pcie slot itself provides the power.
yep
Yeah this is me, my problem is that I am upgrading my gpu and my old gpu didn’t need any cables. However, my new gpu needs a 6 pin adapter but there isn’t already one in the pc since my old one didn’t need it (i bought a prebuilt). Do u know what i am supposed to do??
@@kfyaspace987any updates I have the same exact issue
@@kfyaspace987the only options are either buy a new power supply or use the dual molex to 6 pin adapter
@@kfyaspace987same here! Can’t figure it out
Hey! One question, i have a MSI GTX 1650 Aero ITX that needs a 6 pin power connector, but i dont have the power connector and i am planning to buy an adapter like this, my psu has 500w and the minimum amount for the graphics card is 300w (the graphics card only uses 75w). How long should i use this adapter until i upgrade my psu? (upgrading my psu will be hard because i never built a pc before,but i think i have decent knowledge of pc tech)
Bro You can go with this connector it's perfect as the pcie express slot itselft provides 75 w of power and it only consumes 75w power so you are safe to go even in long term and your psu is also fine for this gpu
A 75W gpu is not even supposed to have pin connectors , only a few has .
@@pacif3rbolte yo beo i go a question i bought a gtx 660 it has psu power slot but do i need to connect to the external psu power cable or can i just connect staright to the motherboard and will it work
Bro my gold pins in the left side cant go all the way inside but when i turn the pc on the gpu work . But still the gold pins not all the way down . So how can i fix it and btw i tried to push it inside but doesnt work !...
Thank you for information ❤
My pleasure 😊
thank you for the video, you got a new subscriber!
Awesome, thank you!
E quando tem dois q sai do mesmo cabo pode coloca o adaptador tbm
is 2 molex to pice safe?
Does a ryzen 5 pro come with a pci e cable? Cause i cant find mine
Very Good Video!!! But I have a question. My GPU uses TWO 6 pins but my PSU only has two Molex. Can I use a TWO single molex to 6 pin for each of the 6 pins?
yep
Thanks for a comment
isso daria algum problema tenho uma Fonte de Alimentação ATX Nox Urano SX 500W 80?
Nice video! I have a question, I've bought a gtx 1650 (75w), I ordered the one without the 6pin connector but I received the one with it, my psu is 300w and it doesn't have the 6pin but only the 2 molex, is it safe for such a wattage to use the adapter?
Make sure 300W is not too little? The bigger, newer power supply will have different connectors.
@@k-nemo As for the whole wattage my psu can run the gpu and everything I have, simply I know that it's usually not suggested to use the adapter so Idk if it's better to buy the adapter or return the gpu
@@nier576 Im having the same Dilemma right now. Can I ask what did you do?
@@JNY_32 I used the 6pin 2 molex and it works perfectly, because the motherboard can stand already 75w so if your gpu is the same I have, or one that uses not much more than 75w it will work, just be sure that the psu has enough power for your gpu and use a 2molex and not 1molex because it will split the wattage between the two cables so it's safer
@@nier576 My PSU is also 300w and the GPU I ordered needs 75w ( also a 1650). The adapter I was looking to get has 2 molex to 1 6pin PCIe. I'm just afraid that the adapter turns out to be flammable
Hey someone plz help
I have 450w psu but it has only 6pin and i need 6 and 8 both pins for the rx 580
Should i buy 6 pin female to dual 8 pin males is it safe
I have only one molex cable fron my PSU, can i plug in the 2 molex to 6 pins adapter to the same "line" of molex? Or it has to be in a separate line from the PSU?
I mean, i have 2 molex but in series, from the same cable.
Had it worked?
IMPORTANT In the moment with u install the molex to 8 pin, start to Saving money for new power supply 80 plus, and very very important making a undervolt in you graphic,for avoid fire in u pc... And 300w is very low capacity, me recommend 500w or more
I wrote about it in the description of the video. The adapter is usually of low quality.
i have 2 x 6 pins so, can i use 2 x 6pins to 8pin cable for my rx 580 8gb? and is it safe ? i have a antec truepower trio 550w psu
I have the same problem because of my 2x6 pin and I buy a GTX 1070 1x8 pin only I ordered adapter but I don't know it's safe or not 😬
is this long lasting?
Does the gpu pin shape matter? Please someone help
hey, I'm new to PC only been a month since I joined but I have a tv as a monitor on my wall (less expensive than a real monitor) could you still install the card without buying other components?
Yes. No problem. Use HDMI to connect the PC to the TV.
@@koagulasepositiv i figured it out earlier i meant to edit this comment but i forgot.about this
Спасибо, помогло
i had a loose connection in my 6 pin connector thus i had issues with auto off on problem like in the video
can i use atx 12v cpu 8 pin to graphic card ? or need adapter 8pin to pcie 6+2 and molex to 6+2? still confuse wire
Am asking this question too
Is it safe to use two molexes to power up a 6pin pcie to gpu? My psu is a generic 750W psu and it has 2 free molex cables
An adapter is not an ideal solution. I wrote in the description.
@@k-nemo what description? '¿Una solucion buena?', a eso te referis como descripcion?
What a coincidence that 6870 is my old card and the 1660 is actually my new one
Who knew
whats the best motherboard for gtx 970?
ينفع اركب وصلة 6 PIN2 +PIN لكارت شاشة محتاج 6 PIN
i have a question. I have a 400w sfx psu but she didnt come with 6+2 pci pin, its safe to use 2 molex to 6+2 connectors? my setup is i3 12100(65w),RX 6600( is consuming 105w in games).
Acho que não tem problema
Help me, I have a new graphics card that needs 8, and I have a wire in the power supply that only has 6, and when I installed it, the screen was black. Is this because of the graphics card, or is 6 not enough?
Hey there. Got any solutions?
@@JackSparrow-ww1rx Yes . I bought a cable that connects bin 6 to bin 8 🙂
what is the white slider at 0:24 and at 0:37 ???
Is you have a 2 pins you have to plug in can it be two different cables?
So i have a 6 pin but im unsure what slot i plug it into in the power supply
Hello, I have a loose 2 pin and two 6 pin. One 6 pin is installed at my current GPU. Im upgrading to a new GPU which has 8 pins. Is it safe to plug the loose 6pin and 2pin in the 8 pin socket? Also the 6 pin one which is linked to the current GPU has all the cables colored black but the loose 6 pin one has the cables in different colors (Brown, black, white etc.), are both 6 pin PCI-E the same or they differ?
Compare the shape of pins 1:56
This comment may be offtopic from this video but, i have a graphics card with 16x pcie pin socket, but my 750w psu only has 14x pcie pin socket. Will it work with the new graphics card?
PCIe is the name of the data connector. The PSU has power connectors. You need to compare the power socket on the graphics card with the plug from the PSU
where can i find the adapter that you put an the last card ? and can put in my rx 570
I bought mine on British ebay
I have a Question.
how long temporary use 2molex - 6pin?
Until you buy a proper PSU.
i have 450 watt psu which has 2x moles pins can i use them to connect my gtx 1060 6gb with 2x 3pin molex to 6 pin pcie adapter.
Yes bro you can
Does it have to be on separate Molex rails? or can it be on the same rail that has multiple Molex connectors?
Molex and Sata usually share a rail. You would want want one from each chain if you could. And this is only sort of safe for cards that draw 120w or less. If it needs 2 8 pins or 2 6 pins, your going to start a fire if you try using 2 of these adapters and 4 molex or sata connections.
@@mattdudley3789 I'm trying to power my Lian Li TL Fans that require a 6 pcie to power the fan connector hub, so i don't think i will be drawing as much as needed for a card. Roughly 60ish W or so if i added them all together... =X So seems like if i just use the molex cable + adaptor 2molex conenctors> 6Pcie power ... it should be safe is what it sounds like since i'm not gonna be pushing it anywhere near that high. (Only reason is my PSU already has 3 used for my GPU and 2 for my CPU/MOBO and there isn't any spares left)
Hello I have an 700watts PSU but it only have 2x molex like in you video, and can it be used on a AMD RX 580?
Did it work?
My gtx 770 have one 8pins and one 6pins can i use the 6pins only??
No.
I don't have 6 pin what I have to do
is the dual sata adapter to 8 pin is that same as dual molex to 8 pin in terms of power draw !
Yes
How do I know if the psu supply i want to buy will work with my graphics card?
You should ask in the shop or any computer forum which power socket the model you have chosen has.
@@k-nemo what do you mean?
@@allenthomas914 Different graphics cards have different commectors. You mast check what connectors you have in PSU supply. Even similar graphics cards can have differents sockets.
Check the GPU power requirements (watts) at techpowerup.com and make sure it meets the PSU power output (also in watts. It should be written on the PSU itself) For example a GPU with power requirement of 300W will work no problem with, for example, 350 or 400W PSU
Check how much amperage can be delivered on the 12V rail.
Moço preciso de uma ajuda sua urgente tem o geito certo de colocar o pino branco ou vc pode colocar de qualquer geito ajuda ?????
Can I use both moment inputs in the adapter of the same molex relays? Or must i use a separate molec
it's better to use 2 separate Molex connectors for more power delivery because if you connect that adapter to the same Molex combine cable it would not make any difference like if you connect only one of them. Hope this makes sense.
does the adaptor work with XFX AMD Radeon RX 5700 XT 8GB GDDR6 THICC II Ultra?
Please don't doed that, this is only for gpu with maximum 120w tdp
(I know your comment is old, but I write this for if anyone ask the same)
Definitely NO
What is the cable you connect the molex into
power cable adapter
Hi. I am planning to install the GPU myself and I can only see 1 molex that I can connect to my GPU. Is this safe with 1 molex connected? 6 pin pcie to 1 molex power cable connecting to 1 female molex from my PSU. It is just one and there no other molex.
Which GPU is it??
If it's GTX 1650 or lower then you can go with it but higher than 1650 then DO NOT TAKE THE RISK
thank you, very nice, my psu doesn't have 8 pin.
You're welcome!
Hello, I have an asus s-30fp 300w psu. 288W max. There is no video card power cable in the psu. I bought one HD 6790 and 2 2xmolex to 6 pin cables. Is the psu enough, will the converters cause fire?
In the moment with u install the molex to 8 pin, start to Saving money for new power supply 80 plus, and very very important making a undervolt in you graphic,for avoid fire in u pc... And 300w is very low capacity
@@YoSoyGeoffy I've already bought a new 600W psu man. I'm using 1080 now.
I'm upgrading from a RTX 2080S to an RTX 3090 and note that the 2080 had an 8 and 6 pin power setup whereas the 3090 has two 8 pin for power. I also know the 3090 has accessory cables (2x 6 to 8 pin adapters).
Do I simply use the adapter for one of the existing 6 pins?
Thank you
Yes is the answer.
I answered it yesterday myself.
It's good you've solved the problem. Well done:)
I have a Raidmax 530ss 80+ and it comes only with 6 + 6 PCI Express. But the GTX 970 requires one 8 + 6. So can I use a molex safely?
It should work. Read the description to the video.
@@k-nemo Yeah, it did work.
I am using a molex of 8 pins PCI Express for my GTX 970 and it works just fine.
My PSU is good enough because its an 80+ bronze Raidmax 530ss.
Thank you
Is it save to use dual molex connector for GTX 1060 3g and it have 6 pin
Is safe but it is only temporary solution. I wrote in the description.
what cable are you using there? (power supply 1)
PCIE from PSU
Thanks
I have only 1 molex, can i split it with 1 molex to 2 molex and then use 2 molex to 8 pin
I wouldn't risk it. I suggest replacing the PSU.
@@k-nemo okay, i will
Hallo,
Von wo hast du den Adapter?
eBay
I have a question. My power supply doesn't have a cable for the gpu. What are the possible solutions I can do to connect my gpu to the power supply?
Change PSU or use adaptor to Molex.
Kalo tanpa kabel adapter gmna om?
So i have the same but one the 4 pin is a normal graph 4 pin connector and i bought it at a computer shop soo
not a big fan of "speechless" vids as a rule, but thank you for showing the grace & good breeding to use a pleasant & somewhat neutral music track instead of bombing your audience with obnoxious rap/hiphop. It really increased the viewability factor by leaps & bounds.
Thanks for watching and leaving a lovely comment.
What happens if you force the 8 pin down ? And if you dent it will it still work I force mine then I didn't turn it on yet?
If it does not fit, do not press, 2:09
So I just got a gpu that needs an 8pin cable. I have no clue how to get that cable and where to connect it. My PC has the right power and everything. Just not that cable
We bought adapters for my computer
Same, I got everything but the knowledge of where to start and where to end, seems like the tutorials are just for those who already have the cables installed and ready to use. But I don’t.
Bro I have a gigabyte1650 oc version can I use dual molex to 8 pin adapter my mobo is b450m and psu is 450w
Check in Power Supply calculator.
@@k-nemobro I was asking if it is safe to use dual molex to 8 pin for gtx 1650 windforce oc rev3.0 as its tdp is not mentioned but it has 8pin
@@user-qg2pz9uv6w I wrote in the description. This is not a perfect solution. It is better to replace the PSU with a new model with the appropriate plugs.
Yes. 1650 in vanilla form is a 75w slot powered card. The 8 pin gives it the ability to use more than factory TDP and overclock it a bit. The bios will have more headroom than one without the connector.. so if you run the graphics card at +0% power, it’s literally slot powered
Hi my psu is generic atx 700w, is this safe to use?
You can check in Power Supply calculator. Adapters are only temporary solutions.
Can 500w igmax psu power system with gtx 1070?
Since GTX 1070 requires at least 450W PSU, 500W PSU should work just fine
Check how much amperage the 12V Rail delivers.
thanks bruuh
A minha placa e de dois pinos de 6 comprei esse adaptador e nada da imagem por 1 minuto e desliga
how long will it last? 2molex to 8pin.
can you estimate. months?
There is no rule. It can work even for many years. But it's not a perfect solution. That's why I warn in the description. I installed a PSU with the appropriate plug after a year. The adapter was no longer needed.
In the moment with u install the molex to 8 pin, start to Saving money for new power supply 80 plus, and very very important making a undervolt in you graphic,for avoid fire in u pc...
What about 6 pin
Its same
2 molex on 2 rail line right?
I'm not sure what you mean
Is it safe to use 2molex to 8pin?
Hi, it'a a very good question, I have explained it in the video description. It's not the best solution; replacing the power supply is a much better idea, so do it if you can.
Adapters can be poor quality and so make sure that all Molex pins are well connected. It is a good idea to check that the connections between the Molex and the 8-pin connector are correct before you start the installation. I've heard that the computer was damaged when the cables were swapped.
@@k-nemo I fried my cable and motherboard. Never using one of these cables ever again.
@@_nom_ bruh your 970 have 1x 8-pin, 1x 6-pin, how you expect molex to handle that ?
@@_nom_ when it's running your 970 require 314 watt to run. The pci e 16 will supply 75w that leave 239 watt that needed to be supple by the connector. The 8 pin will supply 150w and 6 pin will suplly 75w
I only have a 6 pin socket, But the graphics card has an 8-pin socket
Can I only connect the 6-pin socket?
No
Dude, you're asking for a fire. An 8 pin gpu power plug can draw up to 150W. Molex cannot handle 150W. Capiche?
Need to use 2 x Molex. Adaptor it is not a perfect solution.
What about 6pin?
@@k-nemo 2x molex provide upto 108 bro
@@m4rshal469 75 watts only are the needed wattage because the 75 watts are from the motherboard. But I don't trust this process(adapters) in long term use because this is the leading cause of shorts like in latest rtx 4090.
Bro worry about yourself
thanks man
No problem!
Like I tell my son, use your words!!
Thanks for advice :)
My rx 570 4gb 450w needs 8 pins... I have 500w and 2 molex?
The adapter should work. This is not a perfect solution. Rather temporary. They are usually of low quality. You need to make sure that all Pins are plugged in!!! 2:46
hey man, i have a gtx 1650 phoenix oc, and the proboem is that my psu (free silent 550w) doesnt have a pcie cable, can i use 2 molex to make it run?
Yes. 2:12
@@k-nemo thanks man you saved me 80$
Bro, is temporarily solution, and Very important is making a undervolt are u graphic card
What is the power supply cord name i need it for my graphics card
Links are provided in the description to the video.
Can someone help me please..
I have 600w psu and only 2x6 pin amd i need to know if I have gtx 1070 only which 1x8 pin connector it is safe solution to working fine or not ? 😢
Yes, you can because a 2molex can conduct 145 w and your graphics card need 70w it's safe.
Don't use graphics card that need higher than 140w with a molex
the best video
Merci t'ai le bosse
De rien
Sou muito leigo no assunto quero tirar umas duvidas, eu tenho um pc com ryzen 5 5600g (video integrado) estou pensando em dar um upgrade comprando uma placa de video, eu vi alguns videos sobre e sempre repete o mesmo padrão até ai tudo bem, você encaixa a placa de video coloca os parafusos e o principal conecta um cabo chamado PCIE esse cabo serve pra ligar a placa de video, até ai tudo bem, mas o meu pc ja veio montado e nunca mexi nas peças, fios enfim, eu não sei aonde está esse cabo PCIE e nem sei se veio dentro ou está conectado, como falei sou legio, mas eu reparei que tem um cabo muito parecido na placa mãe, então a minha duvida é todos os pc vem com esse cabo? esse cabo PCIE está conectado na placa mãe?
hola MATEO soy español espero q entiendas (SI YA DESALMASTE TU PC Y NO VES EL CABLE PCIE ES PORQUE TU FUENTE NO LA TRAE,
LO MAS RECOMENDO ES
1-COMPRAR UNA FUENTE DE 750W "SERTIFICADA" "BRONCE" "80PLUS" ETC
2-COMPRAR LA MISMA GRAFICA Q QUIERES, EN FORMATO PQUEÑO "OSEA LOW PROFILE"
PROBLEMA RESUERTO MATEO!!
obrigado pela ajuda
i believe my pcie cables are too short for my new gpu sadly...
Здравствуйте, а можно ли запитать 6 пин от 6+2 пин?
Я думаю, что вы можете, если у вас есть 6-контактный штекер