Got my 68 in-line six started a couple of weeks ago after years of sitting. Thinking I will check compression next weekend after seeing this. The motor is so silky smooth, but has no power. I have access to a 351 that I can build up.
Great to see a video. Thanks for satisfying my need .. haha I just recently purchased a 68 Mustang but was in pieces so starting with motor. I have 289.. Getting ready to put back together and paint. Enjoy your videos.
Thanks! Yeah I've got many more videos to come! That's awesome you are putting your 68 back together, best of luck to you. I've got a painting video coming up next. Just primed it this past weekend and now I'm about to start the filler/bodywork.
I feel your pain, take your time and pull the head off the low compression side and look you might be surprised and see it is just a head gasket. Best of luck and keep doing your best.
Thanks! Yeah I thought it would be fun to try, that way I wouldn't have to prep for spraying yet. I'll definitely be spraying the base coat and top coat!
I had many showing low compression. However, once you drive it regular and put it few some heat cycles with fresh fuel and spark. They have a tendency to come back. Kind of a self cleaning valves, and re seating the rings thing. So don’t worry about it yet until you have a few hundred miles on the motor.
Could have some stuck rings on cylinders 1-4. If the motor sat for a long time you can fill the top of those cylinders up with diesel or some other penetrating fluid and see if the rings will come loose.
Yeah I'm going to throw some oil in those cylinders to see if compression bumps up at all. I put marvel mystery oil in them and let it sit for a few days before starting the engine. It seemed to help it turn over much easier.
Enjoy watching your vids. Going through a similar journey with mine. It can definitely be frustrating at times but curve balls are part of the process. As others suggested did u end up redoing your test with oil? Also was your engine warm when you initially did ur test?
Most likely needs new rings. Take the 302 out of the Bronco and put it in the Mustang. You can probably do a budget rebuild on the 302 and put new crank and rod bearings in. Just need a good torque wrench to get bolts torqued to spec. The rebuild is easy but you do need an engine stand. Check out rookie pilot's videos on engine rebuilds. He does everything mostly right! LOL!
All should be within 20lbs of each other. You may have some burnt valves on 1-4. You might get away with some aluminum heads. They are fairly cheap these days. It’s an upgrade.
Looks like you have plenty more work to do on motor. Sounds like more videos.. On a serious note, bummer. I haven't tested mine yet and it's out of car.
Maybe pull the valve covers and see if there is a few stuck valves
Find you an early Explorer with a 5.0 and use the rear end as well. For the 8.8 and lsd.
Got my 68 in-line six started a couple of weeks ago after years of sitting. Thinking I will check compression next weekend after seeing this. The motor is so silky smooth, but has no power. I have access to a 351 that I can build up.
Love your Videos. Looking forward to every new one. Nice work. Thank you for putting out such an amazing series.
Thank you for the support!
Great to see a video. Thanks for satisfying my need .. haha I just recently purchased a 68 Mustang but was in pieces so starting with motor. I have 289.. Getting ready to put back together and paint. Enjoy your videos.
Thanks! Yeah I've got many more videos to come! That's awesome you are putting your 68 back together, best of luck to you. I've got a painting video coming up next. Just primed it this past weekend and now I'm about to start the filler/bodywork.
@@VanHoutenBuilds Can't wait. You are way to far ahead of me. lol
Swap with the bronco.
I feel your pain, take your time and pull the head off the low compression side and look you might be surprised and see it is just a head gasket. Best of luck and keep doing your best.
@@meek01__53 Yeah I'll definitely do that first. Fingers crossed that's all it is!
@sliverhorse good to hear and congrats on your purchase. Is it a fastback or coupe?
Glad to finally see another video!! Sucks about the compression….hope it’s not too serious…that roll on primer sounds interesting as all HELL!!
Thanks! Yeah I thought it would be fun to try, that way I wouldn't have to prep for spraying yet. I'll definitely be spraying the base coat and top coat!
You do need to do the "wet" compression test by adding some oil to rule out rings or valve train.
Im super interested in how the roll on primer comes out. Ive got space issues of my own when it comes time to paint
It seems to be setting up well so far. I'm still waiting on it to fully cure(4 days) before sanding and filling. Time will tell!
I had many showing low compression. However, once you drive it regular and put it few some heat cycles with fresh fuel and spark. They have a tendency to come back. Kind of a self cleaning valves, and re seating the rings thing. So don’t worry about it yet until you have a few hundred miles on the motor.
I'll drive it a bit first and see if it bounces back, thanks!
Could have some stuck rings on cylinders 1-4. If the motor sat for a long time you can fill the top of those cylinders up with diesel or some other penetrating fluid and see if the rings will come loose.
Yeah I'm going to throw some oil in those cylinders to see if compression bumps up at all. I put marvel mystery oil in them and let it sit for a few days before starting the engine. It seemed to help it turn over much easier.
Enjoy watching your vids. Going through a similar journey with mine. It can definitely be frustrating at times but curve balls are part of the process. As others suggested did u end up redoing your test with oil? Also was your engine warm when you initially did ur test?
Yeah I'm planning on retesting with oil to see if it's the rings. No, I tested it cold.
Most likely needs new rings. Take the 302 out of the Bronco and put it in the Mustang. You can probably do a budget rebuild on the 302 and put new crank and rod bearings in. Just need a good torque wrench to get bolts torqued to spec. The rebuild is easy but you do need an engine stand. Check out rookie pilot's videos on engine rebuilds. He does everything mostly right! LOL!
Yeah I love his videos! Angel is super talented. Space to do it is my main draw back, I need a bigger garage! haha
All should be within 20lbs of each other. You may have some burnt valves on 1-4.
You might get away with some aluminum heads. They are fairly cheap these days. It’s an upgrade.
If possible try and stay with that engine.might not be big problems with it.
when is the next video ?
Soon! Make sure to set your bell notification so you'll know when I post!
Looks like you have plenty more work to do on motor. Sounds like more videos.. On a serious note, bummer. I haven't tested mine yet and it's out of car.
Definitely more work to be done! Looking forward to learning more which will be good!
How you afford to live in southern Cali?
I have a day job haha. Doesn't matter where you live, it's expensive everywhere right now!
To bad about the motor!
swap the motor first , then paint , that way you can do the engine compartment while the motor is out