Awesome! I've ordered and put on the the Shock Skids, the Bronc Bushings and the Bronc Brace. Now I will be ordering the 1.5" Body lift set. Did not know I could do this myself. Thanks a ton for this video. You just saved me a ton of money.
I was there that day. Cool to meet you guys and even cooler to know that these awesome parts are being produced in my hometown. Thanks for letting me check it out for a bit. Keep those badass bronco parts comin.
Very cool. As soon as I get my build date I do plan on getting the tie rod braces , steering bushing and the body lift bushings. I was going to get the wheel spacers but now that you came out with the body lift I won’t need the wheel spacers , right? Or if I want my wheels to poke out 2 inches?
I remember all the body lifts back in the 80s and 90s. I thought they were a thing of the past. I'm surprised they are making a comeback. I just shiver thinking about it. Hahaha! I guess it's the hockey puck body lift that gave them a bad name.
I don't like the fact that you eliminate one of the factory mounting bolts on the lifting eyes. By using only the two lower holes you are side loading the mount because the lifting eye is above the two installed bolts I'd recommend coming up with a third bolt on top.
Rather than electrical tape for the harness, I recommend using harness tape, a cloth tape with stronger adhesive than electrical tape. Looks like this kit requires a specific front bumper? Is there a specific version of the bronco that this 3" lift is for?
Awesome! I was waiting for this video. I met Talon at super cel east and I walked away very impressed with their products. Definitely ordering parts from you guys. Keep ‘em coming 💪
So as we discussed on phone but I’ll put this response for others that are interested. As of right now we have it working with the modular bumper and non adaptive cruise control. Still working on non modular bumper options. Thanks for your help and support
I'm really excited about this! Just for clarification please, on a Badlands Sasquatch, will the 1.5" clear 37's or would I still need the 3"? Also, any problem with the adaptive cruise control or other tech on the Lux package? Also, please develop and offer a 2" receiver mount for the front bumper! That would solve the winch mounting problem for a lot of us!
1.5” on Sasquatch will clear 37’s but keep in mind depending on what wheel offset and width of tire you may need wheel spacers as well. Adaptive cruise is getting relocated due to current location it gets blocked by the bumper when relocated. All other tech is not affected. I’ll work on ideas for the winch
And yes, when I order my body lift kit from you guys I’d love to purchase your “Let’s Go Bronco” T-Shirts for my entire Famn Damily!! 😬😬 You guys are awesome, keep up the great work! WE BRONCO Folks Love & Appreciate you! 😉
I guess it was an oversight we are working on some new videos if you want to reach out to me through email go to our website and we will send you pictures
advice please i have 2021 black diamond 4dr with sasqaush and 2.7l i want to keep factory wheels at 0 offset i want 37" mickey thompsons baja at i already have your tie rod up grade and will get steering components asap i want a lift kit that will fit them about 1k keeping factory blistens as i like the ride for my use 80% street 20% pre run on tundra light crawl and mud ding thank you in advance as your videos are my bronco bible
Jeffrey, you are too kind! We have just released several new products for the body lift to make it look even that much better. If you want to send me an email with your information, I can share some of the photos and video of what we have to offer. I will still say 100% your best way to maintain your ride quality and fit 37 inch tires is the body lift! You will need our inch and a half wheel spacer as well. The factory wheels are a positive four offset. 1.5 inches will put you in a little further out than zero. Then it’s a matter of relocating your stock bumpers, or utilizing some of our newest products like the front and rear light bar filler. To me the light bar filler looks really the best. But we’ve also developed a front bumper that works with stock height , 1.5 inch body lift, and 3 inch body lift. Email Broncobuster1977@gmail.com and I can get you more information
wow looks like crap, Im sure youll sell a ton of them, this is the bad taste generation after all, Needs some skinny mall crawler wheels for the complete package
Just a bizarre and unnecessary nod at a political leaning on your clothing. Your own opinion is just not applicable to a product you're selling, and in this case is crass in origin and makes you look generally unprofessional. That lack of understanding from ANY company or product really knocks the shine off of your overall image and therefore pointlessly steers potential sales.
Out of all the good direction and awesome product, that’s what you took away from this video? Maybe if his “political nod” offends you un subscribe and move on. No one needs your whinny azz around anyway. Why is it that when people don’t like a style, product or persons belief they feel they must bash it. Just move on.
The point you're missing is that their beliefs have no connection to what they're selling. I don't want Trump OR Biden tie rod bolsters. The whole problem is the overlap and that reach for division, even if they don't know they're doing it and think they're just jollying along and joining in with something. I have no interest in the owners political affiliations to anything. It is absolutely irrelevant and tells me a lot about them, which will absolutely overlap into their product. The smart guys leave it out of the mix, because it doesn't aid anything. You think they have any pro life seat covers? How about an all lives matter gear shifter? Come on man, it cheapens the hell out of them in a market where's there's other options. An intelligent person should know that and understand that their beliefs are completely separate and entirely different subject matter, no matter if you agree or disagree with what they're into.
@@BroncBustertx I appreciate you saying it, man, but if you don't know the actual origin to "lets go Brandon", then you might want to read up on it by way of avoiding this connection that can only pointlessly cheapen your brand. You seem to have a good product here, and you guys are covered in wordage that links you to a highly political and crass thing, when it has no logical connection whatsoever, unless you want it to.
2" lift on my base and im clearing 37's. Rock sliders still installed, crash bars removed 👍
Awesome! I've ordered and put on the the Shock Skids, the Bronc Bushings and the Bronc Brace. Now I will be ordering the 1.5" Body lift set. Did not know I could do this myself. Thanks a ton for this video. You just saved me a ton of money.
We could use a before and after. I'd like to see a photo comparison. Should look pretty awesome.
I’ll work on that on the website here shortly
Let’s Go Bronco!
Glad to see the t-shirt now on your website 🇺🇸💪🏾
Ordered 3” today. Hopefully it’s as easy as you make it look!
ua-cam.com/video/eYnGE9-itfc/v-deo.html
I was there that day. Cool to meet you guys and even cooler to know that these awesome parts are being produced in my hometown.
Thanks for letting me check it out for a bit. Keep those badass bronco parts comin.
LMAO I had to double take at the Let's go Bronco shirt
Great video. You did a great job showing how easy it is to DIY this lift!
Thanks man!
Will the bumper brackets work on aftermarket bumpers? I have Havoc front and rear bumpers.
Very cool. As soon as I get my build date I do plan on getting the tie rod braces , steering bushing and the body lift bushings. I was going to get the wheel spacers but now that you came out with the body lift I won’t need the wheel spacers , right? Or if I want my wheels to poke out 2 inches?
It depends on your tires and whether they rub. I’d try without and then add if needed.
I remember all the body lifts back in the 80s and 90s. I thought they were a thing of the past. I'm surprised they are making a comeback. I just shiver thinking about it. Hahaha! I guess it's the hockey puck body lift that gave them a bad name.
Yes, this is the best way to lift an IFS vehicle for bigger tires without changing geometry. Well, I guess second-best portals are number one
What about the rear bumper and does it cause problem with the forward collision sensor
Curious to see where the shifter ends up on either lift
It’s not affected the shifter is a cable.
Is the manual Transmission a cable too?
@@Mike-wc9lg yes two cables. I know because I have changed the clutch out on mine four times. 😂 R&D for the aftermarket clutch we’re offering
I don't like the fact that you eliminate one of the factory mounting bolts on the lifting eyes. By using only the two lower holes you are side loading the mount because the lifting eye is above the two installed bolts I'd recommend coming up with a third bolt on top.
I agree and we are working on that! Thank you for your input!
@@BroncBustertx any luck on this as of yet?
@@trikstrfahey yes we have resolved this and are able to pick up the 3rd mounting point.
Will the relocation brackets work
If you have a winch installed on the front modular bumper?
Yes it will
Rather than electrical tape for the harness, I recommend using harness tape, a cloth tape with stronger adhesive than electrical tape.
Looks like this kit requires a specific front bumper? Is there a specific version of the bronco that this 3" lift is for?
We offer stock bumper relocate but currently there are a couple companies offering custom bumpers for the 3” lift Body Gaurd , and lifestyle off-road
Did you loosen the opposite side a bit 1st before jacking up? Wondering about flexing the mounts any
Yes we did
This doesn't affect any gas fill or brake lines etc or manual shift linkage or auto trans cable.? I plan on ordering the 3 inch
That’s correct it doesn’t affect either of those,
Awesome! I was waiting for this video. I met Talon at super cel east and I walked away very impressed with their products. Definitely ordering parts from you guys. Keep ‘em coming 💪
For those of us with the Base Sasquatch and factory plastic bumpers front & rear for now, do your bumper relocation brackets work for us? Thanks!
Yes they do!
That’s awesome!! You guys are making a Huge Impact with the new Bronc’s, thank you so much!
So as we discussed on phone but I’ll put this response for others that are interested. As of right now we have it working with the modular bumper and non adaptive cruise control. Still working on non modular bumper options. Thanks for your help and support
I'm really excited about this! Just for clarification please, on a Badlands Sasquatch, will the 1.5" clear 37's or would I still need the 3"? Also, any problem with the adaptive cruise control or other tech on the Lux package? Also, please develop and offer a 2" receiver mount for the front bumper! That would solve the winch mounting problem for a lot of us!
1.5” on Sasquatch will clear 37’s but keep in mind depending on what wheel offset and width of tire you may need wheel spacers as well. Adaptive cruise is getting relocated due to current location it gets blocked by the bumper when relocated. All other tech is not affected. I’ll work on ideas for the winch
@@BroncBustertx Thanks! Now if Ford will kindly build the Bronco I ordered a year ago I'll be in business lol!
@@northmantru6236 I actually have some really good ideas that I’m putting together to be able to mount a winch. Stay tuned
And yes, when I order my body lift kit from you guys I’d love to purchase your “Let’s Go Bronco” T-Shirts for my entire Famn Damily!! 😬😬
You guys are awesome, keep up the great work! WE BRONCO Folks Love & Appreciate you! 😉
I got your order what size shirts do you want I will provide you with some! 😃
Why wouldn't you show us the before and after comparison at the end.
I have a new video we are working on
Cleaning my glasses did not level the yellow Bronco out. Gentlemen, I lack the fortitude to attempt a parking maneuver like that.
One question does the body lift mess with the steering column and or steering shaft ?
It does not
I am planning a 2.5 lift on my Badlands Sasquatch. Will that be enough to clear the 37" tires?
Yes it is!
Will this work with the JKS max tire kit? or Do you have a simmilar answer?
They will work with the JKS tire Clarence
big fan of your products!
Thank you 😊
Show pic of 1.5. Vs 3.0 lift. Thanks
I will as soon as we get it on a bronco!
Our plan was to do that this last week but we got sidetracked with a bigger project that we had to handle
What flares are those?
Let's go Bronco... 😁
what about the adaptive cruise control sensor in the front, does that need to be relocated with the bumper?
Yes if you have adaptive cruise you’re going to need the adaptive cruise relocate bracket
Nice shirt, Talon🙌🏽 and sick video! You guys are killin it!
Thanks man!!
Are you planning on doing different heights of body lifts?
1.5” and 3”
@@BroncBustertx Awesome thanks I just saw it on your website!
Will the ground wire and wire harness need to be touched if I only do the 1.5” lift?
No it won’t
I want one any smaller lift size. Maybe 2 inch ? Pics after install.
The only two sizes that we will offer is inch and a half and 3 inch
When are you guys taking orders?
We have it listed for sale now but are still a couple weeks before they will ship out.
Will the bumper relocate work for the capable bumper?
Short answer yes! We are working on small modifications for non modular bumpers
So a few setbacks on the non modular bumper. As of right now will only work with modular bumper without adaptive cruise control.
Why don’t you show the vehicle after its lifted?
I guess it was an oversight we are working on some new videos if you want to reach out to me through email go to our website and we will send you pictures
Will this work with the stock plastic bumper?
Yes sir I’ll post up a short video for you to see.
What about steering wheel shaft
It telescopes plenty of length
@@BroncBustertx thanks for making these parts available. Still haven’t decided if I wanna sell the early one yet to get the new one.
Is there an LS swap yet ?
Not yet 😜
How to contact you?
Wow...body lift. Go bronco.
Sweet
Such a shame they went with ifs on these.
advice please
i have 2021 black diamond 4dr with sasqaush and 2.7l i want to keep factory wheels at 0 offset
i want 37" mickey thompsons baja at
i already have your tie rod up grade and will get steering components asap
i want a lift kit that will fit them about 1k keeping factory blistens as i like the ride for my use 80% street 20% pre run on tundra light crawl and mud ding
thank you in advance as your videos are my bronco bible
Jeffrey, you are too kind! We have just released several new products for the body lift to make it look even that much better. If you want to send me an email with your information, I can share some of the photos and video of what we have to offer. I will still say 100% your best way to maintain your ride quality and fit 37 inch tires is the body lift! You will need our inch and a half wheel spacer as well. The factory wheels are a positive four offset. 1.5 inches will put you in a little further out than zero. Then it’s a matter of relocating your stock bumpers, or utilizing some of our newest products like the front and rear light bar filler. To me the light bar filler looks really the best. But we’ve also developed a front bumper that works with stock height , 1.5 inch body lift, and 3 inch body lift. Email Broncobuster1977@gmail.com and I can get you more information
wow looks like crap, Im sure youll sell a ton of them, this is the bad taste generation after all, Needs some skinny mall crawler wheels for the complete package
Just a bizarre and unnecessary nod at a political leaning on your clothing.
Your own opinion is just not applicable to a product you're selling, and in this case is crass in origin and makes you look generally unprofessional.
That lack of understanding from ANY company or product really knocks the shine off of your overall image and therefore pointlessly steers potential sales.
Out of all the good direction and awesome product, that’s what you took away from this video?
Maybe if his “political nod” offends you un subscribe and move on.
No one needs your whinny azz around anyway.
Why is it that when people don’t like a style, product or persons belief they feel they must bash it.
Just move on.
The point you're missing is that their beliefs have no connection to what they're selling. I don't want Trump OR Biden tie rod bolsters. The whole problem is the overlap and that reach for division, even if they don't know they're doing it and think they're just jollying along and joining in with something.
I have no interest in the owners political affiliations to anything. It is absolutely irrelevant and tells me a lot about them, which will absolutely overlap into their product. The smart guys leave it out of the mix, because it doesn't aid anything.
You think they have any pro life seat covers? How about an all lives matter gear shifter?
Come on man, it cheapens the hell out of them in a market where's there's other options.
An intelligent person should know that and understand that their beliefs are completely separate and entirely different subject matter, no matter if you agree or disagree with what they're into.
@@breaddrinker I am sorry but you are reading way more into this than was ever intended by anyone! The intent of this shirt is let’s go bronco.
@@BroncBustertx I appreciate you saying it, man, but if you don't know the actual origin to "lets go Brandon", then you might want to read up on it by way of avoiding this connection that can only pointlessly cheapen your brand.
You seem to have a good product here, and you guys are covered in wordage that links you to a highly political and crass thing, when it has no logical connection whatsoever, unless you want it to.
@@BroncBustertx I’ll buy your Let’s go Bronco shirt and wear it proudly
Does it effect the steering any?
No not at all! This is one of the reasons this is the best mod for bigger tires