Husqvarna 350 Chainsaw Won't Start-Fixed!
Вставка
- Опубліковано 29 сер 2024
- In this video we will look at a Husqvarna 350 chainsaw that won't start. In this case I'll show you how to diagnose a bad fuel line and the steps involved in replacing that fuel line. #smallenginerepair
If you would like to support the channel by purchasing stickers, you can do that here: www.ebay.com/s...
If you would like to support the channel by purchasing a carburetor stand, you can find them here: www.ebay.com/s...
The one thing I have. Notice witch why like coming to you channel is you very helpful as you explain things very well scott regards Garry from Australia
Thanks Garry!
Es un placer verlo trabajar en los motores de 2 tiempos,con que profesionalidad trabaja usted !yNada que ver con un hombre de carolina del norte que veo en UA-cam llamado ( reparación de motores de jardinería) es un mecánico muy sucio ! Así que al verlo a usted da gusto ver cómo trabaja ! Siga así ! Un cordial saludo desde España 👍. PD:y en cuanto a la barbaridad que usted dijo ! En el vídeo no se aprecia nada !!
Thanks for watching and taking the time to comment!
Just replaced fuel lines in a few of my saws that all take the pigtail! They were all leaking where it goes into the tank. I probably could of pulled them up or down some and got more use but i like to do it right! See ya next time!
Another "cheat" that you can use in a pinch is sealing it with a drop or two of super glue.
Thanks Scott! I always learn from your videos
Thats what they're there for. Thanks for watching!
Excellent Repair Brother 😀😊😇👍🏼👍🏼👍🏼👍🏼
Thanks. Simple but effective.
Tks a million for your time and video 😊.
Thanks for taking the time to watch and comment!
Thanks for sharing Scott!
Thanks for watching!
Great work bro
Thanks for watching!
Super!!
Thanks for watching!
My very first 2 cycle project was my grandpas Poulan 2300 cva chainsaw. Yep I got burned on it, long story short I eventually discovered the badly scored piston & cylinder! I’d still like to have a nos top end for it!😂
Yep, lessons learned!
Would like to see how you get the fuel line through the upper casing.
The fuel line needs to be cut at an angle so some of it easily pushes through. Then just grab that end and pull.
where did you get the spark plug remover the plastic one looks handy
Google: Thexton spark plug remover.
@@TheGreasyShopRag Thank you
Nice repair. I have a Husqvarna 350. Leaks bar oil out as fast as you pour it in. Was a great saw.
What does the 45 on the cylinder head mean. ?
Have a great day. 👍🏻👍🏻👋👋
Never gave it much thought but it might be bore size.
👍🏻
Hey! You said schmutz without putting it up on the screen!
I noticed that too after editing was done and thought nobody would notice. I was wrong 🙂
Good find, easier to repair. Think it was from ethanol fuel? Hope ya feel better.
No, I don't think it was from ethanol. It was just an old line that cracked at a hard bend coming out of the tank.
Hi Scott. A lot of your repairs seem to be stiff diaphragms and broken/dissolved fuel lines. What's your opinion on alkylat fuels? Here in Sweden most people run their saws on Aspen 2 instead of mixing their own with fuel from the gas station. Is it better or worse for the fuel lines and carbs?
It seems to be better but there isn't any proof behind that statement. Just my gut feeling from observations.
🔥😁
OK, Scot; what movie freature character would describe your repair as; "Dat be ET"? Show your age by knowing.
Dunno. I must be young :-)
@@TheGreasyShopRag Our Gang or the Liggle Rascals character "Buvkwheat". "Teacher, dat be ET".
What Show Had a Skinny Guy Who Would Always Say “Dynamite” 😀
@@chrischiampo7647 JJ Walker on "Good Times". Kid Dyno-mite!
@@TheGreasyShopRag You Got It Brother 😊😀😎