FL5 Exhaust - WHICH HAS THE BEST SOUND ?

Поділитися
Вставка
  • Опубліковано 26 гру 2024

КОМЕНТАРІ • 44

  • @wcsoblake85
    @wcsoblake85 10 місяців тому +20

    It is amazing to me that you guys will continue to work/modify a vehicle until the customer is happy. There are not too many Mechanics left that have the same morals/ethics you two have. I just wish I lived in Florida near your shop or you guys had a shop here in Easter North Carolina. Anyways keep up the amazing work guys and I can't forget about Esther. I'm sure without her your books would be a nightmare lol.

    • @RICARD01
      @RICARD01 10 місяців тому

      You act like each round is free of charge. Lol.

  • @kalmtraveler
    @kalmtraveler 10 місяців тому +4

    At the end of the day if the customer/owner is happy, that's all that counts. Glad he is happy with where it's at now!

  • @tmango78
    @tmango78 10 місяців тому +2

    Wow. Sounds smooth! Good job.

  • @loulerg
    @loulerg 10 місяців тому

    I though I was finally decided in doing the front and mid resonator delete but now I saw this vid and I’m back to square one 🤣🤣 video I saw with both resonators removed showed some crackle and pops which was enticing but it makes sense to get rid of that mid muffler, not sure if going mid muffler and both resonators would be overkill.

  • @onnu2001
    @onnu2001 10 місяців тому +6

    I haven’t been able to figure out what it is about the CTR and ITS exhaust that causes them to sound so dramatically different from other cars. Whether a plain V6 Charger or the Hondas of old. The exhaust sounds come off as synthetic even outside the car. The best I can describe these cars exhausts is that they sound like blowing raspberries into a cardboard paper towel/toilet paper roll tubes. What the heck is it on these cars that causes that? Is it even the cars themselves or is it how the exhaust systems are engineered? I miss the authentic rumbles, roars, bass, and baritone. Today it seems we have a computer doing a bad impersonation of those sounds. I could fall asleep to the sweet sound of a Greddy Evo 2 on my old 99 Prelude. Especially with that autistic vtec engagement.

    • @LHTPerformance
      @LHTPerformance  10 місяців тому +8

      Yep. Unfortunately there’s not much we can do. Hence one of the reasons I sold mine. I’d love to put a high reving NA K24 into and bring back some sound and soul

    • @justinkhieu5104
      @justinkhieu5104 10 місяців тому

      Ever since the 9th gen civics they changed the cylinder head and manifold design and practically downgraded it to just a downpipe straight to the head that looks like an hdmi port. No more individual runners which explains the crappy exhaust sounds.

    • @ShaiyanHossain
      @ShaiyanHossain 7 місяців тому

      headifold turbo i4s all sound blegh unless you're hyundai who makes up for it with a loud ak47 tune from the factory

  • @darkproduce15
    @darkproduce15 10 місяців тому

    I would love to be able to have you guys modify or create a better sounding exhaust, for my 2018 2.0t 6MT Accord.

  • @beckymiller5951
    @beckymiller5951 10 місяців тому

    Wish they had a sound clip at "full song" at a drag strip or road race course

  • @alyxander8182
    @alyxander8182 3 місяці тому

    Was this with or withou tune?

  • @thomasking9229
    @thomasking9229 10 місяців тому

    Hi LHT from Australia! This may seem like a silly question but did you happen to get a sense of how much weight this saved? the reason is that alot of after market systems that are not titanium save only 2-4kg's and have not demonstrated a fundamental power gain. So I'm wondering if this is a better option!

    • @LHTPerformance
      @LHTPerformance  10 місяців тому +1

      Hi there. Between the two resonators removed I’d say around 3-4 lbs drop. Most aftermarket exhausts weigh more than this factory system.
      You see this
      Civic Type R AWE Exhaust and Swift Springs
      ua-cam.com/video/V4tOEjBKBEI/v-deo.html

    • @thomasking9229
      @thomasking9229 10 місяців тому

      Thanks very much for that! Seems to me titanium is completely necessary then. Not many stockists in Australia though so will keep on the look out, @@LHTPerformance

  • @902Boots
    @902Boots 10 місяців тому

    are you an George equal in welding skills? Did you teach him how to weld or was he welding before he joined LHT? Random question.. just curious :)

    • @LHTPerformance
      @LHTPerformance  10 місяців тому +2

      I went to college and became certified. George was taught at a previous job and I think honed his skills at LHT. Once you know the basics, the more you practice the better you get. When I don’t weld for a while, I get sloppy. Also depends how much coffee we drink. lol.

    • @902Boots
      @902Boots 10 місяців тому

      @@LHTPerformance nice!

  • @robertjordan9075
    @robertjordan9075 10 місяців тому

    Another beautiful job. I wish you could do my 2010 CRV 😊😊😊

  • @Brandondean614
    @Brandondean614 10 місяців тому

    How much does it cost to get something like this done?

  • @louKushh
    @louKushh 10 місяців тому

    still not the greatest sounding 4cyl., but i would say this modification was an improvement, in my opinion.

    • @LHTPerformance
      @LHTPerformance  10 місяців тому +1

      I think it’s the best compromise so far.

  • @prm5798
    @prm5798 10 місяців тому

    The changes you’re making are the same the Acura made on the integra type S

  • @fastminivan
    @fastminivan 10 місяців тому

    What wing risers are those?

    • @PIPE911
      @PIPE911 10 місяців тому +1

      Cusco High Position Rear Wing Brackets

    • @fastminivan
      @fastminivan 10 місяців тому

      @@PIPE911 they look good, wonder if they are same height as the upcoming prl ones

    • @PIPE911
      @PIPE911 10 місяців тому +1

      Not sure. These have a straight leg design, where the PRL one has more of an "s" design like the stock one, may push it further back.@@fastminivan

  • @louKushh
    @louKushh 10 місяців тому

    the only nice(sweet) sounding K-series engine was the Vtec FG/FA civic Si with the 8k redline (K20Z3), and the Acura RSX, especially the last year with the K20Z1.

  • @dakz8715
    @dakz8715 8 місяців тому

    Hows the drone?

    • @LHTPerformance
      @LHTPerformance  8 місяців тому

      Zero Drone.

    • @dakz8715
      @dakz8715 8 місяців тому

      @@LHTPerformance oh good because i was about to buy a AWE touring which is $4200aud and they sound very similar and this is cost effective.

    • @LHTPerformance
      @LHTPerformance  8 місяців тому

      @@dakz8715 I would consider removing the middle muffler ( the one with the valve) and increase the tip size. Like the one shown.

    • @dakz8715
      @dakz8715 8 місяців тому

      How do you differenciate between this mods vs AWE touring?

    • @LHTPerformance
      @LHTPerformance  8 місяців тому +1

      @@dakz8715 This one fits right and sounds better.

  • @rubenske091
    @rubenske091 10 місяців тому

    👍👍

  • @nickkochansky3498
    @nickkochansky3498 10 місяців тому

    Woo!

  • @usnmsc1801
    @usnmsc1801 10 місяців тому

    what is George doing to lose weight, he is looking very svelte!

  • @frieddayfriday
    @frieddayfriday 10 місяців тому

    i love the fl5 unfortunately this car will never sound good. if i have one id make the exhaust super quiet and just make all the turbo noises louder. flutter and t51r mod!

    • @ShaiyanHossain
      @ShaiyanHossain 7 місяців тому

      stock exhaust is super quiet lol

    • @frieddayfriday
      @frieddayfriday 7 місяців тому

      @@ShaiyanHossain well duuuhh?! 🤦🏻‍♂️🤦🏼 sound isn't the only reason why you're changing your exhaust. Most aftermarket flows better.

  • @BarbWaltersMusic
    @BarbWaltersMusic 10 місяців тому

    Almost sounds like the AWE

    • @louKushh
      @louKushh 10 місяців тому +1

      nothing sounds that bad! lol

    • @LHTPerformance
      @LHTPerformance  10 місяців тому

      This still uses the functionality of the valve. Wide open throttle its doesn’t sound bad. Medium throttle is where it needs to be quiet.