I CANNOT believe how well this worked. This thing is SO fun 🤣. Check out our Turbo install video here if you haven't seen it! ua-cam.com/video/IqAI8qHrZmI/v-deo.html
@itsmikelake 3d print a plastic or metal intake that will bolt up two carbs. Bolt two carbs to small y shaped plenum/intake. (• •) the carbs need to mount like the dots and put a line at top and bottom and that would look like your mounting surface and have a big y shaped chamber that narrows down to intake pipe connection. Try to have the narrow down part very close to block as you can get it, basically as little intake tube as possible. I guess another good way to describe shape would kinda look like vacuum cleaner tool piece for carpet🤷🤣 I know it's all jumbled up but if you build it like I said and put nitrous line somewhere in the plenum it won't really matter it's one cylinder. That dual carb design and intake alone will probably increase power to near nitrous level on very top end. Actually it will probably rev as high as it would with nitrous but not make the power, make that intake design for two regular carbs and nitrous I promise you won't be disappointed with power it will make.
As a two stroke owner i can say that the pipe makes a huge difference. My 50cc two stroke motorbike (I'm 15, in Finland we get to ride 50ccs at 15y) originally rode around 55km/h but after a pipe swap (lightly damaged voca chromed 50/70) it now goes 75km/h. I really recommend a good pipe, makes a huge difference. Love this series btw.
That clutch is probably slipping worse than the last one because of the later engagement. Probably needs lower gearing and a stock clutch to work better, pretty funny that the nos works
This clutch isn’t too bad. I have a few different gearing options also. The clutches are like $13 so I’ll grab a few different ones and give them a go haha
get yourself a 3 shoe adjustable clutch you'll be much happier with the performance also put a pipe with an expansion chamber back on it. on 2 strokes , the pipe is what makes the power especially on these engines! @@itsmikelake
A proply made exspantion chamber works like a turbo on a 2t all he's done is made it like a standard one with that off lol 😂😂 should get a liquid cooled blata and work out turbo in exhaust or fit not they do 60mph standard ... Or even work a way of fitting onse exhaust to this without compromising standard flow ... You can't just u bend it since it's hole purpose is to throw un burnt fule back in cylder
@@unfknknown9678 garentie you with the three peacie head since it's got better squish etc it runs about double hp than standard I bleav it's quoted at 4hp if he modded it by porting and polishing he could get 9 or 10bhp with the noss and a kx 65 exhaust it's got the cercular crank if it had that head original
I literally said about nos in the last video😊. Also another note. These engines come in two different sizes, 47cc and 49cc. There is a massive difference in power between the two. I would also recommend changing the reed valves and woodruff key. If you wanted even more power, a b1 rep engine is 39cc watercooled and are around twice the hp of an air cooled engine.
Thanks for the suggestion! I’m literally saving all of this advice so we can build an animal of an engine for this thing, although I’m tempted to put the 125cc 3 speed motor in this also 😅🤣
@@itsmikelake with 125cc it will be absolute beast, with 125cc the turbo will make more boost and you can propably make more power, But don't forget about cooling, I modified my two-stroke, and when driving fast I melted the engine😂😂
Go polini air cooled bzm etc keep it lightweight and simple the water cooled are far superior but require more space and setup etc polini or b1reps are cheap and can get you 50 mph easily they can flip you quck try looking for a quadard the proper blata ones
Somebody already mentioned it in the comments here but regearing it would probably save the clutch a little. Few more teeth on the rear sprocket would make some sort of difference in pickup and clutch longevity. Also a colder sparkplug. And of course a bigger nitrous bottle! Does anyone make a one pound bottle for nitrous? Maybe convert a propane cylinder if u could get it filled s.where? Enjoy your videos cuz u always seem to be enjoying making them
Yes clutch slip certainly is a problem! I did in fact change the gearing slightly in this video to make it all work, I just didn't film that part haha. I think a bigger engine is in need soon :)
Hopefully yall see this have just got into watching the drift kart series watched them all one after the other one last thing i could recomend yous try is the watercooled versions of them motors there actually bored out to like 66-77cc and are used in the adult pocket rockets they race i had one as a kid an they put out atleast 2-3x the power of them motors hopefully yous see this an try it out would me a mental little machine with the watercooled version of that motor
love the build, however if you run a two stroke without an exhaust for long you can burn the piston/kill the motor would love to see a proper expasion chamber on this build👍
lets goooo!!!! woooot! told ya they love NOS! hahahah thats what im talking bout! . also i wonder if the ceiling of the exhaust port has been raised in that new head... also.. raise the ceiling of the exh port in the old head! lol the nitrous with the turbo is a great combo. allows the turbo to spool harder and sooner. should suss what boost its pushing with the nos.
another thing to do for cheaps... before porting the ceiling on the exhaust side. run some nitro methane 20% for rc cars :) go half n half with ur 2 stroke petrol mix to start with.@@itsmikelake
You need to get an advanced timing key. You need to get a ported head and a windowed piston. You need to bore the inlet and the outlet and between in the the carby to flow more air. You need to also get a full circle crank as well. Once you do that it should fly..
Instead of the jet turn the high screw… if it’s a fuel metering screw loosen it if it’s an air screw tighten it but that’ll adjust fuel in the rev range not just constant
This is just like the bullet nitrous system for 5th scale rc cars. We run 23cc to over 100cc in our 5th scale rc cars. Maybe try the bullet system or even the RB innovations supercharger for 5th scale rc cars. I'm sure you can fab up something to make these work together since we use both on our rcs together depending on build 💯🏎️💨
I am only kinda aware of the nitrous wipe cream stuff but id not be surprised if i didn't but i remember like 10 years ago they sold a nitrous kit for stuff like that with the co2 size cartridges
I put one of these silly little engines on a mobility scooter, was a laugh until one of the 3 clutch springs broke... It ended up in a kids dirt bike with an upgraded Carb, Clutch & exhaust... poor kid was terrified of it lol.
I actually bought a solenoid to have it on a button on the steering wheel for this video, but the solenoid couldn't handle the nitrous pressure haha. I'll try and find a better solenoid!
Actually a turbo 2 stroke isn’t a good idea. It creates a pressure that slows the piston and the crank. But, i have to say, that’s a very cool build after all!!!!
You should put a bigger front sprocket that will give u a bit more zoom I had a pocket rocket with my weight I was doing 50km per hour down the road. Thank goodness I live out of town
You need good pipe for that engine, straight pipe is not good because 2stroke needs backpressure. Some 50cc scooter pipe or build own pipe, makes more power with expansion chamber
The clutch hasn't even engaged on the first run...it kinda did with the noz im surprised tbh.. I would find a longer road go flat out then press the noz
The gearing is way to high so the gravity clutch is nearly always slipping and the two stroke is never even hitting its powerband😅 But still great work, looks fun as hell👍🏻👍🏻
The turbocharger will always be better at any altitude and temperature. This video should have been more about boost with a smaller dose of nitrous for the time trial.
You need just a little bigger rear sprocket. The clutch is slipping a looooong time before it catches :) You can hear from the stable RPM's. Edit: Sorry I didnt check to see comments, someone else said the same thing abour gearing :D
I did play around with the sprocket size as I have 2 different front sprockets. The smaller front sprocket made it slip quite a lot more. The clutches are quite funny with these units thats for sure!
LAKE, literally made a Mario Kart....😂😂😂 next thing to make...? JUMP. aaaah maybe not. Prolly bust it in 2 bro. Killer idea though mate. Total how much you got into as it sits in this video? Love to know.
I CANNOT believe how well this worked. This thing is SO fun 🤣. Check out our Turbo install video here if you haven't seen it! ua-cam.com/video/IqAI8qHrZmI/v-deo.html
Amazing content! 😅😅 Love the lets just see what happens attitude and trying new stuff! 😍 pretty new to the channel but here's where its at!! 💯
@itsmikelake 3d print a plastic or metal intake that will bolt up two carbs. Bolt two carbs to small y shaped plenum/intake. (• •) the carbs need to mount like the dots and put a line at top and bottom and that would look like your mounting surface and have a big y shaped chamber that narrows down to intake pipe connection. Try to have the narrow down part very close to block as you can get it, basically as little intake tube as possible. I guess another good way to describe shape would kinda look like vacuum cleaner tool piece for carpet🤷🤣 I know it's all jumbled up but if you build it like I said and put nitrous line somewhere in the plenum it won't really matter it's one cylinder. That dual carb design and intake alone will probably increase power to near nitrous level on very top end. Actually it will probably rev as high as it would with nitrous but not make the power, make that intake design for two regular carbs and nitrous I promise you won't be disappointed with power it will make.
I put mine on my mine bike
Good luck
Where did you get the whipped cream bottle from and how much was it
As a two stroke owner i can say that the pipe makes a huge difference. My 50cc two stroke motorbike (I'm 15, in Finland we get to ride 50ccs at 15y) originally rode around 55km/h but after a pipe swap (lightly damaged voca chromed 50/70) it now goes 75km/h. I really recommend a good pipe, makes a huge difference. Love this series btw.
That clutch is probably slipping worse than the last one because of the later engagement. Probably needs lower gearing and a stock clutch to work better, pretty funny that the nos works
This clutch isn’t too bad. I have a few different gearing options also. The clutches are like $13 so I’ll grab a few different ones and give them a go haha
get yourself a 3 shoe adjustable clutch you'll be much happier with the performance also put a pipe with an expansion chamber back on it. on 2 strokes , the pipe is what makes the power especially on these engines! @@itsmikelake
@@itsmikelake havent seen the new videos but the clutch isnt engaging properly when you arent using no2
The nitrous will help the turbo spooling and it will be so much faster ,try the two together.
if hes scared with no turbo he'll be shitting himself with both 😂😂😂😂😂😂😂😂😂
You cant get enough power you always want more😂😂
A proply made exspantion chamber works like a turbo on a 2t all he's done is made it like a standard one with that off lol 😂😂 should get a liquid cooled blata and work out turbo in exhaust or fit not they do 60mph standard ... Or even work a way of fitting onse exhaust to this without compromising standard flow ... You can't just u bend it since it's hole purpose is to throw un burnt fule back in cylder
@@unfknknown9678 garentie you with the three peacie head since it's got better squish etc it runs about double hp than standard I bleav it's quoted at 4hp if he modded it by porting and polishing he could get 9 or 10bhp with the noss and a kx 65 exhaust it's got the cercular crank if it had that head original
Love seeing this build progress!
Thanks bro! Paint next 😈
@@itsmikelakeYou ever thought about injecting the nitrous directly into the turbo? seen it done on actual cars so dont see why it wouldn’t work here
THE NANG BUILD! Love this series so much!
Haha how good aye 🤣. Thanks!
I literally said about nos in the last video😊. Also another note. These engines come in two different sizes, 47cc and 49cc. There is a massive difference in power between the two. I would also recommend changing the reed valves and woodruff key. If you wanted even more power, a b1 rep engine is 39cc watercooled and are around twice the hp of an air cooled engine.
Thanks for the suggestion! I’m literally saving all of this advice so we can build an animal of an engine for this thing, although I’m tempted to put the 125cc 3 speed motor in this also 😅🤣
@@itsmikelake with 125cc it will be absolute beast, with 125cc the turbo will make more boost and you can propably make more power, But don't forget about cooling, I modified my two-stroke, and when driving fast I melted the engine😂😂
@itsmikelake 💪love it. Don't forget wheelie bars soon 🤣
Go polini air cooled bzm etc keep it lightweight and simple the water cooled are far superior but require more space and setup etc polini or b1reps are cheap and can get you 50 mph easily they can flip you quck try looking for a quadard the proper blata ones
@@itsmikelakei want to see the 39cc lc👀
Need to build 6 of these and have a little drift comp at a local cart track!!
Cam just bought another 2 👀
Bro I really injoy watching u build this
This should just be a series
Cheers! This pretty much is a series at this point haha
Are you going to try the turbo and nos ?
I’d like to! I want to refine the turbo setup first 😁
Cant wait to see whats next for this. This series is awesome
Thank you bro! Already filming the next vid 😛
Somebody already mentioned it in the comments here but regearing it would probably save the clutch a little. Few more teeth on the rear sprocket would make some sort of difference in pickup and clutch longevity. Also a colder sparkplug. And of course a bigger nitrous bottle! Does anyone make a one pound bottle for nitrous? Maybe convert a propane cylinder if u could get it filled s.where? Enjoy your videos cuz u always seem to be enjoying making them
Yes clutch slip certainly is a problem! I did in fact change the gearing slightly in this video to make it all work, I just didn't film that part haha. I think a bigger engine is in need soon :)
That is crazy dude!
i'd love to see this thing on a dyno at some point, see how much it makes (stock) and with the nitrous spray.
Thanks bro! I’ve got plans in place to make this happen 😈
Hopefully yall see this have just got into watching the drift kart series watched them all one after the other one last thing i could recomend yous try is the watercooled versions of them motors there actually bored out to like 66-77cc and are used in the adult pocket rockets they race i had one as a kid an they put out atleast 2-3x the power of them motors hopefully yous see this an try it out would me a mental little machine with the watercooled version of that motor
this is just pure genius !!!!
Thank you haha I appreciate that!
Wow amazing! can't wait for your future upgrades
love the build, however if you run a two stroke without an exhaust for long you can burn the piston/kill the motor would love to see a proper expasion chamber on this build👍
Cheers! I've got an expansion chamber on the way. I'm excited to see if it brings any extra power!
Where you get the bigger carb ??
lets goooo!!!! woooot! told ya they love NOS! hahahah thats what im talking bout! . also i wonder if the ceiling of the exhaust port has been raised in that new head... also.. raise the ceiling of the exh port in the old head! lol
the nitrous with the turbo is a great combo. allows the turbo to spool harder and sooner. should suss what boost its pushing with the nos.
Best combo! I'm keen to keep developing this setup to see where we can push it
another thing to do for cheaps... before porting the ceiling on the exhaust side. run some nitro methane 20% for rc cars :) go half n half with ur 2 stroke petrol mix to start with.@@itsmikelake
The bottle was too funny!!! :D You should try it without the plasti...YOU DID!! hahah NICEEE
Haha thank you bro! Throwing an expansion tank exhaust and putting it on the dyno tomorrow 🤣👌🏻
@@itsmikelake 😂😂love it!!!
You need to get an advanced timing key. You need to get a ported head and a windowed piston. You need to bore the inlet and the outlet and between in the the carby to flow more air. You need to also get a full circle crank as well. Once you do that it should fly..
Oh and you also need to get a fat boy exhaust with a nice big expansion chamber.
So many mods left to do! I'll keep pushing
You can also get a lightened fly wheel as well.
You can also get carbon fibre reeds as well.
How about a 10-speed chain sprocket then you'll have gears😊.
Use propane to richen up the fuel mixture during boost or when adding no2.
Instead of the jet turn the high screw… if it’s a fuel metering screw loosen it if it’s an air screw tighten it but that’ll adjust fuel in the rev range not just constant
This is just like the bullet nitrous system for 5th scale rc cars. We run 23cc to over 100cc in our 5th scale rc cars. Maybe try the bullet system or even the RB innovations supercharger for 5th scale rc cars. I'm sure you can fab up something to make these work together since we use both on our rcs together depending on build 💯🏎️💨
Love this thing so much 😭
It wasn't the nos that made it go fast, it was the red gloves!😂
I am only kinda aware of the nitrous wipe cream stuff but id not be surprised if i didn't but i remember like 10 years ago they sold a nitrous kit for stuff like that with the co2 size cartridges
This is sick !!!
Do turbo and nos put the turbo back on normally drill, a hole into the exhaust weld the nozzle for the nos in the hole
That's awesome brother i have to try it out on a two stroke RC car
Please do that haha
I put one of these silly little engines on a mobility scooter, was a laugh until one of the 3 clutch springs broke... It ended up in a kids dirt bike with an upgraded Carb, Clutch & exhaust... poor kid was terrified of it lol.
Mike, let's leave it alone 🤣🤣🤣🤣
🤣🤷🏻♂️
You should try to put some rags with gas in the whip cream canister. Surely it would grab some of the fumes to make the nitrous kick harder.
Nos and turbo now👀
Yo one of those $5 velocity stacks would fit right on the front of that turbo
So sick ! Should put a supercharger on it 😂😂
I just made me one and it's crazy power made my motor stream 😂
🤣 it’s so damn good!
The Nang Kart !💨
HAHAHA perfect 🤣👌🏻
what to do next? how about a 140cc pitbike engine?
yo u can put like 3 or 4 catridges in that whip cream canister
I need to see the turbo now
Soon 😁
I ran RC nitro fuel in my 2 stroke pocket rocket just did a 50/50 mix with the 2 stroke oil it was unreal so much more power and the smell ❤❤❤
How good is the smell! I’m buying some this week 👀
Love to see turbo with nitrous lmao
You know that's in the plans for sure haha
Day1 pls put twin turbo on it pls
Haha twin turbos?! I mean, I wouldn’t be against it…🤷🏻♂️
You should make some sort of wire connection to the nos so you dont have to reach done to use it make like a paddle shift for the nos?
I actually bought a solenoid to have it on a button on the steering wheel for this video, but the solenoid couldn't handle the nitrous pressure haha. I'll try and find a better solenoid!
Can crack at least 2 canisters into the creamer then have a spare loaded up ready to crack. I’ve whipped cream before 👀 😂
Hahaha you cream whipper you! 🤣👌🏻
Make one with a turbo and one with just nos
Brutha you’re gonna send the rod thro the roof
Probably 😅. Luckily they’re cheap haha 🤷🏻♂️
@@itsmikelake cheap like me brother man
Do a big bore kit for your 50cc
Actually a turbo 2 stroke isn’t a good idea. It creates a pressure that slows the piston and the crank. But, i have to say, that’s a very cool build after all!!!!
What did you put in this nitro botle except the compress air?
Try find a pipe with an expansion chamber for it
I’ve ordered one 😁
You should put a bigger front sprocket that will give u a bit more zoom
I had a pocket rocket with my weight I was doing 50km per hour down the road.
Thank goodness I live out of town
you should put 70cc 4t engine with that turbo on that thing
You need to install a sneaky Pete nitrous kit.
Would it work as a wet shot if you added fuel to the whipit canister?
I found one of these motors for 63$ on amazon i wouldent worry about blowing it up when their that cheap to replace
Combine the turbo and nitro!
Pro tip, you can charge 2-3 canisters at a time into the whipped cream dispenser.
Correct! I was running 2 at a time in this video :)
@@itsmikelake MMMaaad lol such fun , use da nos to spool the turbo with different gearing and do Burnouts ....
Wow cool, just tell me where you buy one please!,, pretty nice, you’re making that
Inject the nos into the turbo volute
Hey Mike would you like to do a Dyno video of your drift cart v my crazy cart. Every one will love it 😂
You need good pipe for that engine, straight pipe is not good because 2stroke needs backpressure. Some 50cc scooter pipe or build own pipe, makes more power with expansion chamber
Expansion chamber incoming! :)
Do Nos with the turbo, then the turbo would probably kick in more then previously
Not sure the poor wee 50cc motor would handle it too well 😅
The clutch hasn't even engaged on the first run...it kinda did with the noz im surprised tbh..
I would find a longer road go flat out then press the noz
where are you buy thet canister
Collecting green shrooms 🤣👍👍
Hahahaha DING!
@@itsmikelake boost mode brother 🚀🚀
Love the videos! So is that a 50 cc 2 stroke? I built a 50 cc mini n mine rumbles… maybe I’ll post a video of it
Thanks Paul! Yes that's correct. I think i'll make some modifications to the engine next to make her quicker!
@@itsmikelake can’t wait to see them! Mines a 50cc 4 stroke 4 speed dirt drifter… currently teaching my 5 year old how to drive it.
Thats so cool
Thank you bro!
The gearing is way to high so the gravity clutch is nearly always slipping and the two stroke is never even hitting its powerband😅
But still great work, looks fun as hell👍🏻👍🏻
Ohhhh so you think we should make the gearing shorter? That makes sense! I didn’t even think of that 😅 would that mean a smaller rear sprocket?
Should put nitro on with the turbo
AMR 500 supercharger from Temu
Hey bro would like to do a Dyno video with your drift cart v my crazy cart. I think it would be a sick video for your page 😂
Bro you know you can fill that canister will 3 cream chargers and you will last long and you can get a bigger one as well
Yep! I was running 2 canisters in the charger in this vid. Lasted ages!
You can fit 5 canisters in one whipper
Needs a bigger motor!😂
Put the turbo back on with the n2o then put it on the Dino
Soon my friend 😁
did you think of putting the JET in the drill and holding the bit in some vice grips?
I don’t really think, I just do haha
You are a pretty fart-smeller.
Dawaj załóż teraz chydrołape ale to jest tak bardzo zabawne jak to działa 😂
I wanna see you put the turbo back on and run it w nitro 🥺🥺
Coming soon!
What da heeeelllll 😮😮
😛
What about the turbo with nos
That’s next. RIP engine 🤣
now we need an engine swap!
Incoming!
how do u turn it off?
The turbocharger will always be better at any altitude and temperature. This video should have been more about boost with a smaller dose of nitrous for the time trial.
Put a exhaust on it then it will give you more power
I'd have mounted the NOS bottle so it can be triggered by your left foot.
The brake is at my left foot and throttle at my right haha so bit difficult!
@@itsmikelake Haha I didn't think it had brakes!
I would probably not be here if it didn't have brakes haha@@rtg0616
Modified Gas Bottles to fit next
😂 Mike Lakes Turbo Nos MiniMoto Kit available now $999.99 😂
🤣😂😂
Get a two stroke exhaust you Will get so much power😊
I’m on it 😁
You need just a little bigger rear sprocket. The clutch is slipping a looooong time before it catches :) You can hear from the stable RPM's.
Edit: Sorry I didnt check to see comments, someone else said the same thing abour gearing :D
I did play around with the sprocket size as I have 2 different front sprockets. The smaller front sprocket made it slip quite a lot more. The clutches are quite funny with these units thats for sure!
some people use it with balloons
👀 yes. Yes they do 🤣
both you need plsss
Yoo mike, what brand are those rear tires?
Yo! Just the eBay ones 😁
@itsmikelake thanks for the reply m8! I'm building a 125 4stroke 4 speed drift cart inspired by you!
doesnt the turbo just push out all the gas out of the cyilinder on a 2 stroke
Apparently. Though it definitely does give it more power. I'd say it's definitely not as effective as a 4 stroke turbo motor
turbo name??
LAKE, literally made a Mario Kart....😂😂😂 next thing to make...?
JUMP.
aaaah maybe not. Prolly bust it in 2 bro.
Killer idea though mate.
Total how much you got into as it sits in this video? Love to know.
Hahaha cheers homie! You best believe we’ll be jumping this at some point haha
that bottle can hold about two cartridges of nitrous. giving you probably about a 10 shot
I had 3 loaded in it at one point 😛
@@itsmikelake atta boi
😂😂 hahaha mike🤣🤣🤣 don't blow that engine 😁😁😁😁💪💪💪💪💪💪✌️
No promises! Haha
Is it actually nos or is it co2
It’s food grade nitrous oxide 😁