🤔 Want to perform suspension analysis in Adams car? (WATCH THIS) | MSC ADAMS CAR TUTORIAL
Вставка
- Опубліковано 11 лип 2024
- Chapter two in ADAMS CAR TUTORIALS series: ADAMS CAR overview.
What we gonna see here today:-
Adjusting Hardpoints for BAJA Suspensions
Edit Suspension Parameters
Providing Required Wheel Alignment
Performing Different Suspension Simulations
Animation of results
Post-Processing Graphs
A quick question you guys want us to make video series on Kiss-Soft software for Transmission design and Calculations, if we get good responses to this in the comment section below then we will make it.
which is suspension Hand calculation validation with Adams postprocessing graphs so if we get good responses to this in the comment section below then we will make it.
Like, Share, Subscribe to Our channel to motivate us for this kind of tutorials. And To follow us on various platform links have been provided below.
There are two more important suspension analysis is remaining, which we are going to cover in the next video and we will also see post-processing of results in the form of graphs. And in that video we will give you Baja And FSae full assembly templates.
✔ DOWNLOAD HERE LOTUS SUSPENSION SOFTWARE
imojo.in/LOTUS_SUSPENSION_SOF...
Get Free Certification of Completion after completing the Adams Car Tutorial Playlist Completion.
Mail us: atvcalculations@gmail.com
Software download link: -
getintopc.com/softwares/devel...
MSC Adams car download and Install:
• Video
Twitter community:
/ atvcalculations
Fb Page:
Automobile-T...
Instagram community:
/ automobiletech
Follow this link to join my WhatsApp group: chat.whatsapp.com/C2sPQDyHXks...
Thanks For Watching.
![🤔 How to perform FSAE SUSPENSION SIMULATION in Adams Car? | Watch This | [Adams Car Tutorials 2020]](http://i.ytimg.com/vi/VGFYXxme-NM/mqdefault.jpg)
![🤔 How to perform FSAE SUSPENSION SIMULATION in Adams Car? | Watch This | [Adams Car Tutorials 2020]](/img/tr.png)
![🔴 ADAMS CAR TUTORIALS [Chapter one - MSC Adams car Interface] (latest 2020)](http://i.ytimg.com/vi/w-srOwaUqDs/mqdefault.jpg)
Guys you are doing a great job . keep posting videos like this .👍
This tutorial video is great and spot on for beginners like me.. Thanks a lot.. Also, Regarding the Gearbox analysis, and suspension hand calculations, I request you to educate us by making those videos.. Thanks in advance.. I have a lot to check out in your channel. Keep up the great work.
nice job thanks!
Thanks man ❤❤
wow, what interesting is it!!!
the video is great and surely it will be very informative if you can compare hand calculations with Adams post-processing
Great! please make more videos on ADAMS!
Yep
Great video.. loved it ❤❤💕. But How to change the Shock mount position to the upper arm ?
Good stuff 👍😁. Was expecting simulation with frame (roll cage)
Coming soon!
Good job! A video on suspension calculations would be very useful. Kindly do a video on that.
One video I have made on it already you check out our Baja virtual presentation playlist.
What are the inputs,and outputs in Dynamic analysis of suspension?
What does the RPC3 file contains?
it would be very informative to compare hand calculation and post processing results.
Thank you
Its great for learning.
Can you make videos for baja transmission in adams please.
Okay I'LL surely do that.
Good one👍. Can you do for bus bus air suspension?
Informative video.
However, I can't find Adams/Car on my system after downloading MSC Adams 2019 Student Version. The only applications I can see are Adams View, Adams Flex and few others.
I request your help.
Hi. Do you have any recomendation to learn this? I am newly interest with vehicle especially an tubular offroad car. I just know the Fourlink Excel Calculation. Thats it
I really want to know more
Thanks
Sir, Is there any Video tutorial regarding the active suspension and interfacing with matlab?
As you mentioned in the video please make a video on suspension hand calculations and verification with Adams post processing graphs
Yep coming soon
@@atvcalculations4539 I'm so happy you guys are going to do it!
good work, i've fond some problems in adjusting hardpoints in leaf spring suspension, can you please make a video explaining it ?
Surely soon
Thanks for videos
Glad you like them! Any special video you want us to make?
@@atvcalculations4539 how to assemble special subsystems like for three wheeled vehicle configuration.
@@nikhilgurav2583 you want to assemble it in Adams software?
@@atvcalculations4539 yes, can't I ?
@@nikhilgurav2583 yes you can I'll one video on it. It's a complex thing but can be done.
Can you make a video on 'How to create custom templates for Adams car'...for example mounting the coilover on the upper arm.
I'll Make it soon.
What are the inputs,and outputs in Dynamic analysis of suspension?
What does the RPC3 file contains?
I couldn't find baja template
, Where should I download this additionally
post processing output of the analysis how to measure and do improvement after surf the graph
It could be helpful if you do a video on building template on pushrod type suspension....and saving it into the database
I try and make it as soon as possible.
@@atvcalculations4539 Importing the designed parts from softwares like catia , ansys , importing hard points from lotus
Good job, can you make a video about suspension with leaf spring ? it will be nice if you do it :) Thanks
Yes I can, I'll make it soon.
@@atvcalculations4539 thanks a lot 👏👏
Hi sir, adams default template isn't working itself
i can not buy the software it always tell me failed can you please help me
i wanna know what is the height reference i mean the height of that table
there was an error while modifying spring evenif file was present and the error was
Adams View could not open the file 'mdids://mini_baja/springs.tbl/baja_front_spring.spr' for reading.
Same here plzzz help 🙏🏽🙏🏻🙏🏻🙏🏻
How do you change caster angle?
Hey, Can you please also show analysis for rolling& vertical force?? I tried these values. Roll angle upper-= 4 degree, Roll angle lower= -4, Vertical force= 1000 N, Number of steps= 500. But there was error coming which said step size is small. What could be the issue ?? Or can you suggest me some values of above things
Mail Me your Query. atvcalculations@gmail.com
can u add more videos regarding suspensions module regarding baja
yes plse
where can I get BAJA Suspension template
Amazing video man! Unfortunately I have a problem with the Parallel wheel travel simulation, it gets me the following error: "A problem occurred while reading in the property files! Please verify the existance of the property files referenced in the assembly."
How can I fix it? Thanks
the same error for every simulation
Mail Me atvcalculations@gmail.com
Video on suspension calculations is also welcome....
👍
What are the inputs,and outputs in Dynamic analysis of suspension?
What does the RPC3 file contains?
I'll answer your query in upcoming video.
I'm getting error with output prefix when I try to simulate!
Simulation Failed (Program Error) !
Please review the message file 'xxx_crc.msg' for details.
Can you mail me file and screenshots.
atvcalculations@gmail.com
can you make a video on how to make a custom geometry template like h arms
Stick With us in this tutorial series you will see it coming soon.
Are the changing of hard points done{assigning new values} randomly?? How can I import/create a new hard point though.
I have used hard points which i have got from front view swing arm geometry graph.
Front view swing arm geometry you can learn from the book race car vehicle dynamics by milliken and milliken
In assembly name I don't have fsae and Baja files in search tab. What should I do?
In further videos I have provided download links of templates so go and download it.
Can you do a video for steering analysis that'd be grear of tour help
Exactly in which software you want me to do that? Can you please specify.
@@atvcalculations4539 adams and lotus
Could you tell how to install baja templates ?
ua-cam.com/video/VGFYXxme-NM/v-deo.html what this video till end you will get it.
Sir can u please explain dynamic analysis in detail? And what all u did?
I'll do it soon
Sir in my software i dont have baja subsystem template.Can you guide me regarding this.
It has been provided in the description below.
Sir,Could you provide that mini baja template ??
Double wishbone and H arm
how to get baja template
Wait in next video i'll provide you drive link to download it.
How did you get hardpoints
From swing arm geometry.
Read- race car vehicle dynamics by milliken and milliken
please use good audio delevered by an actual human..