Ford Focus Engine Air Filter Cold Intake mod for under $50 bucks
Вставка
- Опубліковано 6 жов 2024
- save gas, save money doing it yourself, save weight removing old housing
Ford Focus Engine Air Filter Intake mod for 2006 ZX4
tools needed:
T20 torx driver, Dremel cutter, Phillips screw driver, small sockets to remove some other screws.
here's the parts I used:
Spectre Performance Universal Clamp-On Air Filter: High Performance, Washable Filter: Round Tapered; 3 in/3.5 in/4 in Flange ID; 6.719 in (171mm) H; 6 in (152mm) Base; 4.75 in (121mm) Top,SPE-8136 Blue
amzn.to/37PCkv9
**FYI Amazon will say this wont fit, because you need the next coupler part and this doesn't come stock with Focus
Spectre Performance 8751 Black 3" to 2.5" Intake Coupler
amzn.to/3FV0m4K
As an Amazon Associate I earn from qualifying purchases. - Наука та технологія
Nice video, u made it look easy, I did mine and had to JB weld a piece of the pipe were the sensor goes since the tube/pipe was to long
i think i was fortunate to accidentally cut in the right spots
Any check engine lights pop up after awhile?
i've never had any error associated with filters come up. nice to have a permanent fix and increase performance.
What did you use for a shield on the bottom there
the ford focus has a metal platform where the old filter box used to sit/attach. the new filter simply lays/hangs on top of that metal platform. you can also take/cut a piece of the old filter housing and attach to the platform for an extra side guard in one of the bolt holes.