Can we get this grader cranked, so local farmer can fix his roads?
Вставка
- Опубліковано 3 чер 2022
- Galion motor grader PARKED 17 YEARS! Will it start?
▶️Watch us crank a Champion motor grader here: • Will it start? Motor G...
💁🏻♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
👕TRUEWERK CLOTHING: bit.ly/2M7wvyn
You'll automatically save 15% by using this link!
🎁 AMAZON STOREFRONT*: www.amazon.com/shop/hamiltonv...
🇺🇸HOMESTEAD IMPLEMENTS: bit.ly/2MsYVCC
🎧 Elgin USA: elginusa.com/ Save 10% with HF10
🥾Georgia Boots: www.georgiaboot.com/
👨🏻🌾 👩🏼🌾 Our website!
www.hamiltonvillefarm.com
🚜 TITAN ATTACHMENTS*: titanattachments.sjv.io/MXd13n
🔦OLIGHT: www.olightstore.com/s/L52J86
SAVE 10% with code: HF10
MAIL: P.O.BOX 183 VERNON FL 32462
-----------------------------------------------------------------------------------------------------------------------
INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission. - Авто та транспорт
While the starter was off you might have tried to hook jumper cables to the starter to see if the starter motor spins and the bendix drive fully engages.
I also agree with a post earlier to open the injector lines to make sure its not hydro locked and may help spin the engine.
Don't give up on it, you are close to success.
I love watching the videos and had high hopes for this one once it broke loose. One thing you may want to think about though is pulling the injectors to pour the marvel mystery oil into the cylinders that away you know for sure that all cylinders get oil into them and then leave them out until after you have spun the motor over a few times so that you do not hydro lock the motor.
Mad mad props to you Wiley. You falling on that piece of equipment could've been a lot worse sir!...please both of you be careful. I absolutely enjoy the videos you two put out, and always look forward to seeing what next adventure ya'll uncover, but please lets try to avoid hospital visits, okay? Keep the videos coming, and above all God bless you both.
Great effort Wiley and Hank. No one was killed in the making of this video. Stay safe you two, and God bless!
Good old Galion motor grader it will start and move just like the t 400 Galion motor grader be safe keep up the hard work.🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜
Those graders were running machines we had a couple 850s and used them year round in winter to plow roads. Great video.
Веселый дед и хитрый дед!)) Я рад, что вы находитесь в добром здравии и хорошем настроении!
Здоровья и процветания Вам и Вашим семьям!
Храни Господь!
Thanks for sharing Hank appreciate the hard work you guys put into this video GOD BLESS YOU GUYS
Wiley hope you're doing okay buddy, that was one heck of a battle bump you took to try and save this old iron! Hank, love both you guys and the laughs you bring us. Thanks for being yourselves....just two buddies having fun wrenching on old iron. God bess!
old guys rule! that was a tuff one, when he fell i went right into prayer im glad he's ok . you sure give what fur but well Hank can't win them all great video God bless
Could try pulling it to see if it wound turn over. Love watching you and Wiley doing you thing. Keep them coming.
Contact UA-camr Diesel Creek he might be looking for parts for his Galion grader
Pretty sure he’s finished with Cristine
and the only thing in common with diesel creek and this one is the company name
Probably diesel creek will be interested to buy this one
He finished his grader
This one is larger then his
I love that shirt Willey's wearing, this thing making oil🤣🤣
Thanks! Links to purchase is in video description
@@HamiltonvilleFarm thanks Hank, your awesome brother 👍👍👍
Thanks Hank and Wiley for a great job guys sometimes you win and sometimes you lose thanks again
Watching y'all two guys crank up old heavy equipment both of y'all do real good both of y'all know what y'all doing I'll do a good job at it you're always making me laugh what y'all say
Hank you have a great guy in Wiley - look after him well. Give the Galion another go - graders are a cool piece of equipment...
So grown up. Wow you guys always find the good ones. Just started watching it so I’ll have some more comments I’m sure
I know ALL about Marcell and his talking chain saw.😁👍
Marcel Ledbetter has 10 siblings...
Ardell, Bernell, Raynell, WL, Lanell, Odell, Udel, Marcel, Claude, Nugene, & Clovis.
Jerry Clower had clean HILARIOUS family stories about everyone of the Ledbetter's he grew up with, including Uncle Versy & Aunt Pet & his Jerry's brother Sonny
I miss Jerry Clower's CLEAN HUMOR, WIT, WISDOM, & HILARIOUS FAMILY STORYTELLING so much!!!
I probably have 10 or 15 CDs & probably 20 cassette tapes of his I used to take with me on the road when I was a truck driver. Listening to all his stories for some reason, always made me feel close to home, especially when I was gone for 2-3 weeks & got to missing home!!!
Much love from Mobile Alabama.
Aweeeeeee!!!!
I am sure that I, like MILLIONS of Hamiltonville-Berg-Township-Farm-Village-Hamlet viewers are wondering: after the last, loading disaster, video - is it "Will It Run?" OR "Will It Blow Up???"
Stay tuned for the shock ender where Wiley becomes a hero (yet again!)!
Seriously, looking forward - you guys always have interesting content! 😎
You may be able to turn the crank backward, away from the stuck point by using the fan, now that it is beginning to free up. If you Can turn it backward that way, it might just take several tries to get it past the tough part. Also, you might also try using more batteries to give that starter a little more punch.
Hank just a tip I hope might prove useful in the future is that each individual valve guide has a cup shaped seal with a hole in the center on it for the valve stem.
This stops oil from the rocker assembly and case migrating down the valve stems and getting burnt which can cause carbon build up and emission problems.
Because of that, if the valve stem seals are in half decent condition they should and probably will prevent any lubricating oil sprayed on them from penetrating into the guide much less down to the head of the valves so you probably wasted your time and some oil doing it.
The only place that lubricating oil should have gone is straight down the oil return drains into the sump.
Judging by the discoloration around the bottom of the hole corroded through the exhaust manifold, that engine was exposed to some water penetration so there probably wasn't a rain cover on the exhaust at some point.
If that is the situation it should be the exhaust manifold that gets removed rather than the intake because the exhaust is where the water would have entered.
Thank you for sharing and the appreciation
Do a voltage check when the starter is engaged. it may need the 3 batteries and clean connections to have enough power available for the starter to do its job. Great video, hope Wiley's back is not to sore. That fall could have been a lot more serious.
@RODALCO2007 I miss your wasp videos!!
Glad Wiley wasn't too bad in that fall. Great video. Sometimes you can't win them all.
G'day guys,I felt that fall Wylie take care please, keep up the great work and God bless you both.
Always love your videos, should look at maybe getting a extendable indexing prybar, gearwrench make a nice one. Can adjust the end of it to get different angles out of it. Keep the videos coming
Gee I do hope Wiley recovers well after that slip, I bet it left a bruise. As always it made a great video guys. Safe travels bro
Well you boys went above and beyond on this one I see the disappointment in Wally’s eyes I sure hope he is ok after the fall 👍👋🇨🇦
That jerry clowers reference probably went over most peoples head
lol. Probably
It's a early 80's Galion A550 it was discontinued in 1985. International Diesel DT466 Great work Wiley
Poor Wiley. Prayers your back heals fast. Sorry you got hurt.
Yes it will run if it’s got motor
That was great Hank and Whilley that was great loved it never miss a video and can't wait for next one Whilley you are a man's man I would have been cussing up a storm when I fell I would have put it in gear and pulled it with another pice of equipment on the farm. Thanks guys great job but a fail.
I was thinking as y’all were pouring the MMO into the intakes that y’all were going to hydro lock it. Next time pull the injectors out and try to spin it over which will blow any excess fluid out of the cylinders.
I’m glad that Wylie wasn’t seriously hurt during that fall.
👍 First thing anyone would do, I guess they never heard about that! 😅
Great effort guys!! Your success rate is still probably way up there.
They might give you the beer joint with that thing
Hank Wiley said no way no way no way maybe the next time another good videos can't wait for the next one
Great video new subscriber here.I love the fact that you are doing this to help out the gentleman that ownes this,for free,thats really kind of you both and it restores my faith in man kind..so a big thank you to you both for helping out this gentleman stay safe and see you in your next video.
Thanks much!
Your welcome.
A real country comedian Jerry Clower was. I still have his CD's
Thanks for another great video.
It was interesting and enjoyable.
Lots of hard work and a no go. Sorry Hank and Wiley.
You both try real hard but sometimes things just do not cooperate.
Wait for the next one and try again.
My compliments to both of you for always trying.
You both take care and be safe
Looking forward to the next video.
Thanks for everything.
The Iowa farm boy.
Steve.
My dad falls all the time when we’re working on equipment. Lol always makes me nervous, but he always pops back up and carry’s on like it didn’t even happen. 😂
Easiest un-stick I ever had was an Oliver 60 that sat several seasons with the exhaust uncovered. Couldn't budge that engine no matter what we tried. I bought a gallon can of CRC-556, used some vacuum tubing to siphon the cylinders full (nasty tasting stuff), gave it 24 hours. Next day, pulled the starter, put a bar in the flywheel and broke it loose with one hand. Worked it back and forth until I got a full turn on the crankshaft, and started putting it together. Drove it out of that farm lot that day, after cleaning the ignition components and de-gunking the carb. And replacing the oil in the crankcase. Drained about a gallon of 'clear' water off the bottom before getting any oil.
Those injectors look like they'd be easy enough to pull. I'd consider trying that approach again.
Gutted you guys didn't get this one working especially after Wiley got put on his backside by it glad he's ok tho 👍🏻thanks for sharing Hank best wishes to you both🙏
lol Hank n Wiley, we need to hear "more gooder"!
Those belts are in good enough shape to see if you can get it running, then if you get it running, then change or replace anything that needs it. Also take out the aircleaner to let it breath, as the ones in it are no good garranted. It's not like there is a huge dust problem to worry with. Then as with everything else that needs changing, get a set to put back in it.
Thanks for the great video again sorry that it didn't work out this time you're still the best one tip I can give you if you only put in the bolds of the starter and let them stick out a little and you're laying something across that little braker bar you move you're leverage point higher so wiley doesn't fall any more I hope he has no problems after the fall and also try to spray liquid wrench in ware it was hard to get the mystery oil in that stuff works on any thing Thanks Hank and Wiley for a other entertainment video can't wait to the next one
God bless 🙌
11:41 "scared me, and I ain't scared of nothin". 🤣 I'm gonna start using this one lol. Just wait till you accidentally hit that starter with the wrench on the right there.
Excellent video Hank :) & Wiley :) yes should have meal before you work on these big toys so carry batteries and fluids like fuel also oils jugs also cans that heavy duty weight ! Also big strong to too and strength too 💪 Lol ! Also this Golden Galion grader trade with that brand new shiny helps out plus when parked 18 years ago to means motor was in excellent shape plus well taken care of too!
Hope Wiley's ok. Ben there done that but atlases no one was there with a camera to see it, but I still jumped up and looked around to see if ant one saw me hit the dirt. lol
Don't u all ways look up to see if someone is looking /laughing I do
Appreciate you gentleman taking the time to make these Awesome Video's
We appreciate you taking the time to watch. Thank you.
Hank just get behind that Galion and have Wiley dump the clutch push the heck out of it, you can do it!
Its behaving like a tractor I acquired thats cyllinders were full of rainwater. Turn over a bit but then locked up TIGHT.I pulled the plugs and got a bath.Like the other comments say,pull the injectors and it'll likely spin over.Its not stuck. Most diesels have very little room to allow the lubricant to go.A tablespoon full might even be too much.The amount you put in? way too much.It will leak down but could take quite awhile.Pull the injectors and let er spit it out.I came out well with my tractor,its still running great.
Where the crankshaft pulley is bolted on, try to use an impact grade socket on a long breaker bar. I used that on a CJ-2A Jeep (1948) that was locked up, it freed it. (L- 134 ci cast iron flat head) and, Righty tightly turns it counter clockwise, the direction you want.
I look forward to getting home from work and hoping you posted a video, love your videos, actually just purchased a shirt
We appreciate that. Thank you
You two are a hoot to watch.Love your viedo's...
Y’all should invest in a borescope camera that you can Bluetooth to your phone . It’s a small camera that bends and flex’s so you could take out a fuel injector and point it in the cylinder and see if their is rust buildup in the cylinders . I got one you can Bluetooth to my phone camera for $20 off of Amazon.
Now were talking the dude is working, I love it.
Putting Marvel Mystery Oil in the cylinders is great for a gas engine, but may have a negative effect on a Diesel because of the compression being higher, you may have hydrolocked the cylinder that got the most. I wish you well guys, I hope Wiley isn't too badly hurt after falling onto that sharp corner, I know it was embarrassing for sure 🙂
Maybe water on top of the piston
Well, it looks like the rocker arm should come off, then the injectors. Squirt some mystery oil in injector pockets, and tap on each valve with a soft mallet to unstick any valve. Take the fan blade off, get an impact socket on the crankshaft bolt, and turn it clockwise with at least a 2-foot black iron cheater pipe. Repeat this until it moves somewhat freely. Soak injectors in clean fuel, take injector lines off blow them out with air, and spray some brake cleaner through them. Drain the fuel tank, replace fuel filters, and blow the line to the fuel tank out. Clean out the water separator if it has one. Look up the valve settings. Replace fan belts, and check the radiator for water, rust color, and oil traces. If ok then top it off if needed. Make sure all batteries are at full charge and load test them. Have some heavy-duty jump cables handy, and a can of good starting fluid too. Replace air filters, and check for critters in there. Give it another shot after all that.
Those DeWalt electric chain saws are so handy , had one for couple years , very good investment
Should have added that the line up of their other battery tools has given me very good service, the air compressor might of might not work for you as it has a ten minute on duty cycle time , but is so handy , I have several for my fleet
Ok damn you Wiley you got me in trouble with my mom now, she asks me the other day if the washer was full of water yet and I yell back at her "momma that thing making water" lol she so tired of me saying that sheet it's funny thanks for the laughs
😂
I'm so enjoy watching this video.
As many engines I have seen you guy try to bar over. You need the universal starter hole barring tool. It bolts in place of the starter and turns with socket
Love watching u and wiley doing will it starts
Dang it! Dam good try Boys. I know that IH Engine and they are pretty built proof. It may have grabbed the sleeve and moved the sleeve and hit the top of the Head or just more soaking and back and forth rocking and she will go I think, I hope you re visit this at some point I just have a feeling you are very close. It don't help Wiley any but I felt for ya man when the mule kicked you. You Boys stay safe your Fans need you!
Hello From Tennessee, I can't Believe it Started 😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮
Just think about this. How many tons of metal SCRAP do you get up and running again, sold to someone at a good price so they can get their work done. In this day when the blue collar are being squeezed for every penny, you guys are providing a HECK of a service. Thanks y'all.
Thank you.
Enjoyed the video Hank and Wiley. You can't win them all.
You could make a barring tool for turning over the engine using the Bendix of an old starter.
worked on galion motor graders in viet nam had the privaledge of putting one back together after it hit a land mine
blew battery, one wheel , chain drive air cleaner and misc stuff had a 4-71 detroit in it
That wire Wiley point out be glow plug cylinder warmer for cold starting up for easy starting up to and easy to prime motor to !
Y'all need one of those latus sticks with homemade markings on it for your fuel checking gauge measuring stick. For tank checking purposes.
Jerry clower always talked about marcel leadbetter and his whole family lol
Cut bottom of the bottle to make a funnel or gear lube bottle with a hose and it can also be a gravity feed for fuel too
Good video, got some stickers heading your way, hopefully it makes the toolbox wall of fame 😂
Good deal. Look forward to it
Yes sir I knew who Marcel Ledbetter was cause he run em out of that beer joint with that lightweight McCoullah chain saw (according to Jerry Clower )
Wiley is as tough as old shoe leather. He'll be fine!
You ain t no Marcel Ledbetter !!!!
LMAO !!!!!
KEEP THE VIDEOS COMING !!!!
🎶A little early birdy gave my head a squirrely whirly and asked me of I needed a ride!🎶
You gotta keep your Whiley in good working condition or else you won't be playing with anymore machines for a bit. :)
The Austin-Western Pacer 100 and 200 all wheel drive. It could drive straight up a vertical wall. They came with Detroit Diesel engines the 100 had a 4-71 & the 200 had a 6-71. ChiefD
With an open stack the odds are WAY against running without a LOT of work and worry. And Austin/Western was the only all wheel drive (including the front end) for a long time. Probably a lot more now. I'm out of the diesel loop and into shorter grass mode. Listen to Tommy, Gina and Wiley and GBWYall!
Hello Yankees under the fan where there are the 2 belts normally there is the big nut which holds the crankshaft pulley there I think that with the truck key you should be able to turn your engine Subject to try
Good luck boys
Hey hank I thought u were scared of snakes lol 😆
How about a shirt that says "I'm not a mechanic, I just play one on UA-cam" You guys are totally awesome!!
Those briers don’t look like they have been used before 🤣🤣
Take picture of what your doing before you take it apart,really helps when you put it back together
Your t shirt needs to say "I am not a mechanic, but I play one on UA-cam."
Lol
Suggestion. Go to Harbor Freight and get a one gallon garden sprayer. Remove tip end of hose, Will give you 1/4 inch hose to get into tight spots like that intake port, or sparkplug hole. Different sprayers for different fluids.
Man, First Claude Gray, then Manfred Mann, Hank's really showing one incredible Playlist! 😄
Edit: I swear I can feel that fall Wiley took in my soul!
Once it is hydro locked. the easiest remedy would probably be to loosen the injector crabs (probably no need to actually remove them) to let all of that MMO out.
Nice
Wiley be careful brother. Ugh. I felt that
Yeah.. I genuinely felt bad for him.
Could be hydro locked. You could pull the injectors and see if it will spin over then.
good job and God bless yall
Putting the magic oil in the intake will let it in the bore if the valve is open. Spraying the base of valve spring won't let lube in as it has a seal. Possibility if water got in it can't be compressed like air so appears as stuck.
Hi from uk Hank and Wiley👋👍 well we cant win them all mate this goes to show that the ones that fired straight up arent set up for this is one of a few that have failed to move past that full revolution😢 but maybe in time she may give it up and spin🤔?? Who know lol and why not try putting a bit pipe in the marvels oil bottle and hang it and then get it all in cylinders ? I thought you said you and Wiley where mechanics 😂😂 lol I love it when you dig the comment section lol pmsl 👌 thanks for your time and be safe see you soon👍👋
When you were putting the marvel mystery oil in, you could have just left the manifold attached, took off the hose and poured the fluid in that, then crank it enough to allow oil to run into cylinders. Or just let it set and hope it leaked enough in to lubricate those cylinders.
Awesome vids been watching a lot lately vid you not spin it back via the fan instead of not getting at the flywheel. Tbh it's the first time I've seen you defeated lol.great work from UK b,ham 👍👍
I love your content so much