Non-Coalescence-When Water Repels Itself
Вставка
- Опубліковано 21 гру 2023
- Get your last minute Christmas Gifts at historicmail.com/ACTION and get 10% off on Historic Mail with the code ACTION.
Surprise a loved one with this timeless gift. Thanks to Historic Mail for sponsoring this video!
Slow Mo Guys video: • How small does water g...
Smarter Everyday video: • The WALKING WATER Myst...
Shop the Action Lab Science Gear here: theactionlab.com/
Checkout my experiment book: amzn.to/2Wf07x1
Twitter: / theactionlabman
Facebook: / theactionlabofficial
Instagram: / therealactionlab
Snap: / 426771378288640
Tik Tok: / theactionlabshorts - Наука та технологія
I'd be interested to see the three water streams coloured red green and blue to be able to better observe the different states of repelling/mixing.
Then they wouldn’t be the same solution would they -_-
that would be huge
It would add too much complexity for a UA-cam video. The air bubble thing is also kind of not even close but works for YT. Waves aren't 2D but the demos look better in 2D or 2.5D. Scale is ignored in this demo.
I was thinking the same 😂
Probably could do it with different colored light on each tube, coloring the water without actually changing the solution.
It would be interesting to see what would happen at higher pressure!
Yes! I wanted to know this too. Higher pressure would mean thicker air and harder for water droplets to displace it, I believe? The droplets may last a bit longer.
But I assume it won't be as effective as vibration, since it continuously introduces new air between the droplets and the surface.
Or maybe in a container of SF6
@@Appletank8 . . . Which brings up the related question of whether what's important is number of gas molecules per cm^3 or total mass of gas per cm^3? If the former, then SF[6] wouldn't help, and helium wouldn't hurt; if the latter, then SF[6] would help and helium would make this phenomenon basically impossible at 1 atmosphere.
same
My thoughts too.
Water that doesn't mix with water? Stop trying to break physics. You're going to crash the simulation we all live in.
It's not breaking physics. It's doing physics under uncommon parameters.
Science is always evolving our understanding. Love to learn. We don't know everything.
NEVER mix the streams! 👻
_Guys I have an idea 🥃💧🌧️_
Shhh don’t let them know that we know
4:45 That must explain why it always happens in my bathtub when I turn the shower on. The water in the tub basin mixes with soap residue, then that soapy water is hit with droplets of fresh water from the shower head causing it to repel for a couple of seconds. It’s so cool in the early morning because the sun comes in the shower window at just the right angle to illuminate just the droplets of water dancing around making them look like they’re glowing. Or, the repeated pelting from the drops of water coming from the shower head vibrates the water enough to maintain the spheres longer
Very interesting, especially the one with the vibration. Could you make this in a heavier atmosphere with e.g. SF6 Sulfur hexafluoride as well ?
@6:20 If you would have slighty colored the water solutions with different colors (just as much as not to change the surface tension), perhaps one could discern the repulsion better. Here it seems, that it flows across.
I'm reminded of lava lamps. The coil at the bottom is actually to break the surface tension so the blobs can rejoin each other.
It's hilarious that, to this day, when I hear "surface tension" I automatically think of the James Blish sci-fi story that I read 45 years ago. Imagine all this scientific understanding mixed with tiny life forms, living out their lives in the process. Great video, thank you. I've noticed these effects with water, but never known how and why they work.
I actually observed this by chance while urinating and got so intrigued by it that I ended up destroying the toilet. Needless to say my parents got very angry with me for that...
For that matter, one paper I read suggests that a temperature difference between the droplets and the bulk liquid does help enhance the effect as the droplet evaporates, which is precisely what you get when pissing
Bro……., I thought I was the only one. I was always wary of telling people because they’d either think I was crazy, or a pervert, or that they’d ask me to perform the trick. 😂
@@Martin-hb4illol same here but I went ahead with it anyway in the name of science. My comment was about piss streams splitting in two and sometimes even coming back together into a single stream.
I think I had always wished this would happen when I was a little kid and my cousins and I would “cross the streams” and have battles. Im not certain our moms loved that we played that game.
I'VE ALWAYS WONDERED WHY THIS HAPPENS ONCE IN A WHILE.
I always thought it had something to do with the leidenfrost effect because it was kinda similar but only temporary. I'm so glad I finally understand why this happens.
The Leidenfrost effect is trapped air too, I think. So you were probably right!
@@redryder3721 btw it's steam rather than air for the leidenfrost effect
I accidentally made a weird mixture of liquids containing 5+ kinds of dyes and ink and some other stuff in middle school, and its droplets can stay on itself's surface for minutes when stable. I have absolute no idea how did I made such a weird liquid, and have never reproduced anything close to it again. 😶
Cool 😮💯👍🏻
😮
The droplets in your mixture may have used buoyancy to float instead of coalescence
Invents liquid vibranium by accident. "I accidentally made a weird mixture of liquids in middle school"
Did you record it, or was it back in the "not even a potato" age?
I just used your link to send Historic Letters to a retired teacher that is going to love this. I just received a digital copy for myself. It was from the "Wright Cycle Company" to The Smithsonian Institution. It was dated May 20, 1899. This is so cool!
This sure seems fascinating. Couldn't even wrap around just how impactful this experiment is. Blew my head out of proportion.
Now turn your vacuum chamber into a pressure chamber and see if you can get non-coalescence to occur with regular water by just increasing atmospheric pressure
@@jpetrovich1987 do you know you replied to a comment rather than made your own comment?
@@cinnamoncat8950 yes 😆 I realized that after the fact and honestly I'm still very new to the commenting game on UA-cam so I couldn't figure out for the life of me how to do anything about it 🙃 🤷🏼♂️
I see this phenomenon when pouring oil in a funnel while changing oil in my car. Never knew it had a name though.
Thank you, I've been curious about this lately and you finally explained it!
Wow this is really cool :) I've noticed this phenomenon a couple of times myself, but that vibration trick really blows my mind. Awesome!
James have you ruled out electrostatic effects with the non - coalescing streams of water ? We know that fluids can acquire a charge when forced through a nozzle so maybe there is also some electrostatic repulsion ? Also , with the vacuum chamber how do we know the reduction in boiling point isn’t influencing the amount of vapour from the water itself which might change the forces between the droplets and the water ( or indeed the surface tension) and have an effect?
Not James but, electrostatic effects likely play a role in non-coalescing water streams, as fluids can acquire a charge, potentially leading to electrostatic repulsion.
Regarding the vacuum chamber, non-coalescence is found to be pressure-dependent. Reduced pressure in such environments can alter the boiling point and vapor pressure, impacting the dynamics of droplet behavior.
Damn dude your videos just keep getting better and better over time. I've been thoroughly impressed by the last 6mo of videos
Makes me wonder what effect static electricity would have on this
Op died finding out
EXCELENT VIDEO!!!
THANK YOU! and MERRY CHRISTMAS!!! :)
I think you have nailed it....From my fluid dynamics class you are descrbing classic boundary layer effects where the thickness of the layer is maximum under laminar flow. Just as you created in the in tube jets as tank head dropped.
These beads of water skating across a water surface were called antibubbles in a Physics Girl video from a few years back. That video showed liquid in liquid as well as liquid in air bubbles.
No they're not that's something else
Antibubbles are what happens when you have a membrane of air underwater, literally a reverse bubble, as opposed to a membrane of water in air.
@@crusher9z9 Interesting - so they were not using the correct terminology in that video.
@peglor there is a video you need to see, search smarter every day The WALKING WATER Mystery.
Great episode! You made surface tension seem far more fascinating than I ever thought it could be!
It’s in the simulator
Good explanation.. Always loves to watch
8:04 - It works better when you attach the tray to the vibrating surface..... It also looks cool looking over it w/ a nice back lighting.
I just saw the slow mo guys short and commented I really wanted to see a physicist go into a super in-depth explanation of why this happens, then this video showed up in my recommended. Thanks youtube!
0:34 What in the flying fudge...
That literally looks like how a typical game glitch would look. When the center gets redefined and no external forces force it to be anywhere, it just has no parameters to decide to snap to one side and thus it just centers itself where it is. And that explains reality too, fascinating!
I've seen this effect so many times, and was hoping to see an explanation and official name for it eventually, so this is exciting to see!
It looks so fascinating in slow mo! 💛💛💛
Watched this happen at the beach in the ocean while it was raining. All the rain was bouncing from the fresh vs the salty ocean. Pretty cool to see.
Posy has great footage of this -- a hot drink can emit enough steam from the surface to provide a perpetual cushion, holding up condensed water droplets from the steam itself. Depending on the droplets' size, they can produce an iridescent effect.
If The Matrix/Simulation ever is going to start glitching out. Or if that theory ever is going to be proven, this channel is where we are going to see it first. The man is effectively breaking reality by dismantling it to its most basic functions and putting it back together again. On a platform where its easy to get overwhelmed by intense and dedicated stupidity, channels like this are VERY important. 🧠
Love the slow mo guys and smarter everyday shout-out!
This was very interesting, I learned a lot!
8:30 I was about to complain that you didn't test in vacuum despite having one. God job man!
My first thought was to retry the experiment in higher atmospheric pressure, but then someone suggested a heavier gas. Both might give different results and I'm not sure how the heavier gas would behave... I mean, the two experiments in the video were with a Nitrogen/Oxygen atmosphere and a vacuum. Maybe a different atmosphere would cause the water to behave differently.
@TheActionLab great video as always. What type of microphone do you use? If you've addressed it before I apologize. Thank you for your time.
Venkman: “You said crossing the streams… was BAD.”
The action lab always finds a way to get his vacuum chamber involved
Thanks! You gave me an idea!
For that last test you did, it makes sense that removing the air will make it stop happening since air under the drop was what makes it work in the first place
It's always a resonant frequency created on the surface of the water that creates them. If you notice, it happens mostly near the edge of your container, and the size of your drop, the nearness to the edge of the container effects that resonant frequency. I bet the larger the container is the less likely you can create this with just water.
I don't think pressure has anything to do with it. The main issue is that air gets in between the drop and the surface of the water. All you did was remove the air from the vacuum chamber so there's no more air to get in between the drop and the surface so then there's nothing to bounce against. As someone else suggested, it might be interesting to see what happens when you increase the pressure. Does it add enough air that there's more "cushion" between the drops and surface or does maybe the air pressure can push "harder" against the drop and push it into the surface more?
Pressure and density are related in glasses, so reducing pressure and removing air are the same thing unless you also change he temperature or gas composition.
Also he didn't pull a vacuum since the water would boil in a vacuum, he just reduced pressure to 0.4 (somewhere about halfway between Tibet and Mount Everest)
I would love to see the collaboration between Slow Mo Guys and The Action Lab on this experiment.
Me: GUYS WHAT IF THE CAKE IS A SPY!?!?!?!? cake:eat me
Really cool!. Be interesting to know if raising the pressure would allow the effect to start happening in water without the added soap.
Thanks
Water can have "structure" internally and at the surface. With or without "structure", any of these factors can influence: Air pressure (explored). Electric field & air ions (explored). Sound in the air. Vibration of the water or tank (explored). System temperature. Temperature gradient (explored). Air gas mix ratio (oxygen nitrogen argon; carbon dioxide). Other uncommon gases. Dissolved gases. Deuterium fraction in the water. Dissolved soap (explored). Dissolved salts. Ultrapure water? Reflected waves from one drop can affect the next drop, so use a huge tank so that the waves spread out and don't come back for a long time. Type of light shining on the system (infrared, ultraviolet, visible). Radio waves. Strength of gravity (run the experiment in a large centrifuge for higher gravity; lower gravity is difficult; zero gravity is available in free-fall or in orbit). Laser pulses to tickle the drops at various times after formation.
I have a suggestion for a future video. In soundproofing it is impossible to stop very low frequencies. Even noise cancellation doesn't really work. High frequency sound proofing is no problem. It would seem that having a vacuum chamber around the room to be soundproofed would stop any frequency. This would solve the issue, but you would need a solution for the door. Fun project?
On really cold rainy days I see water non coalescing on top of the lake or river.
Sometimes on my windshield too.
Ah Yes Nice To See This Guy Again!
This is a perfect opportunity to play with INCREASING pressure, instead of always using the vacuum chamber. Try experimenting with a high pressure chamber. Great content as always.
9:22 - I think its more accurate to say that its air dependent, not pressure dependent
Now increase the pressure. See if you can make it last longer.
There's no Action Lab without vacuum chamber 😂
Whilst pouring in new oil to top off the fryer at Sonic Drive In years ago, as a young adult, I discovered that what splashes out of the fryer when pouring is, in fact, the new (room temperature) oil. Because it never burned me when it splattered out due to a careless and rushed pour. It was room temperature rather than 450 degrees F. I'd know the difference.
By extension, when taking a leak, any splashback is pure urine and not toilet water.
9:16 It would be really interesting to see with a more dense gas how the non-coalescence increase, or just augmenting the air pressure instead of degassing
Those historic letters are brilliant. You just pay $70 and they mail you a paper printout from google images each month! What a deal!
Hey Action Lab, could you perhaps make a video on Stoichiometry? I've been trying to get a better idea of how it works and i think it would make for great content on this channel
4:11 it's a good information
I observed a similar effect with oil draining from an ATV. The final stream broke into droplets before hitting the oil in the drain pan and then danced across the top for about 4 inches before snapping into the surface. Perhaps the Texas humidity had some influence?
with no air in the chamber, there can't be a layer of air seperating the droplets.
I think it's an interaction between the surface tension of both liquids and the air trapped between. The air cant leave through the droplet because the surface tension wont let it, and the velocity of the two liquids colliding traps the air between, neither willing to open up and let the air escape so they can unite.
The soap helps because it changes the surface tension of the water. the pressure determines how much air is trapper.
That would be my theory anyways.
The pressure may just be shaping the drop on the way down. Or it is affecting the speed achieved, so the fall distance should be reduced to actually compare extremes.
My brother, and I observed something similar on regular occasions when we were kids.
Water isn’t actually that wet. In that it often sits on top of fabric or substances without soaking in. If you add a small amount of ethanol it increases the waters ability to soak in making it more ‘wet’.
Physics Girl did a video called "What are Antibubbles?" seven years ago about this. 😻
9:15 It is a neat demonstration but it doesn't take away all of the possibilities. There Is a possibility that it is dependent on the closeness to the boiling point and not the pressure.
While the pressure drops so does the boiling point.
Neat, I wonder if you could also increase the duration by increasing the atmospheric pressure, or by trying another gas.
you should also test it with the frequency machine in the chamber, to see if it's only pressure dependant or not, it seemed to me that vacuum chamer not only pull the pressure but also the air and i think it only reducing the chance it happening, and i think i could still see it at max vacuum in this vid
I always wondered what these were when I was a kid, and I did notice that it happened when the water was soapy. Wasn't sure if it was a weird type of bubble or something.
Interesting video. I've mostly noticed this with coffee, didn't realise it happens with slightly soapy water. I would have imagined that soapy water being more sticky / better at wetting things would coalesce more easily than pure water. I also have to remember not to all these anti-bubbles because that's something else.
Me personally, I enjoy a little bit of soapy coffee. It results in zero coalescensce within my body - a truly remarkable phenomenon
Thank you for blinding me at 0:45
Ive always wondered why that happened in my shower sometimes!
3:35 love that Dr. Pepper shirt, now I want one.
Really cool experiment! Thank you! I have a big fascination with water! I took some Laws of Water and experimented in my pool, one summer! LOL Had a blast!
so in ur vacuum pump expt u get beads when pressure is increasing but not when pressure decreasing?
query is why that research article didn't specifically mention about "increasing pressure" condition but only "changing pressure"?
i love your content! I do have a question, Is there a practical application for this effect?
If you build it, they will come
Loving the Fallout 3 -like sound track in the beginning 👌
Might be interesting to see if you could demonstrate the strengthening of the effect in water by increasing the pressure in a chamber🤔🤔
Maybe it's a similar/same effect in the shower when you pour a stream of liquid soap.....like shampoo in your hand, at an ANGLE. It deflects instead of streaming down into your hand.
This would make for a nice segue into cold welding
i discovered this effect as a kid with hot wax, i call these anti bubbles, it happens because of surface tension and difference in density from difference in temperature
It wouldn’t be an actionlab video without a vacuum chamber test
Nice to see you give others some credit.......
I completely understand using oscillations to induce air pressure variations between the droplet and the surface (ideal frequency is probably dependent on droplet size, i.e. related to its resonant frequency). *But,* why would it suddenly stop after 15 minutes? 🤔 ...😮 *UNLESS....* It's slowly _losing molecules_ through evaporation, which eventually changes the resonant frequency, so it's no longer ideal!! So I bet temperature has an effect on how long they last!! Damn, I'm a GENIUS!! 🙊 Wait, _maybe_ I'm a genius... (don't know if I'm right yet lol)
Time to get a pressure globe! 😊
Very cool man
I love how almost everything on this channel ends up being in a vacuum chamber.
can you replace the air with another gas to confirm it instead of removing the pressure/air?
too see if it's pressure or air dependant.
Its not reprlling itself- water doesnt conglomerate immediately in with other water when affected by gravity- its flow of water- which if you slow down youd see when water shot out in a stream eventually breaks. When you uave several streams its a transfer of the energy by inertia, transfer molecules and energy continuing the flow through each stream.
So do ultrasonic atomisers (like you'd find in a humidifier) ultimately work by this principle?
Sir please explain how Archimedes screw climb up the Down flowing water stream
what did you get for the vibrater which you used to vibrate the water and create non-coalescence
put a piece of double sided styky tape under the basin to fix it to the plate
This is so cool
Those few droplets that were bouncing on the surface were so cute
That vacuum chamber has earned its price a hundred times over on this channel.
1:05
When you’re sword fighting with the homies.
Does lamnar flow assist with the liquid/air/liquid barrier?