Oh yes - sound deadener is amazing. I used it when I built my 57 Beetle. The doors sound like a modern car when they shut. A nice thump & click of the latch.
Red reflective electrical tape! Love that stuff. I've used the same stuff on motorbikes for trim effect, mainly rims and rear areas of bikes for extra night visuals. Stuff lights up like taillights do when someone gets behind you, and when applied to chrome parts or aluminum rims is damn near impossible to remove.
Nice, anything reflective is a good ideal for a bike. I’ve sense removed that vinyl stuff and the tape. Had issues with it sticking… I do have some ideals in the pipeline to snazz the door sides up still.
All the speakers were kicker DS series. I remember the dash ones being a little weird with the fit, but it was close enough that I was able to make them work.
@@nicholsperformance92 Good to know this i wanted to go with all kicker ds series. But crutchfield was saying top mount depth was to deep. So TY for info now i can finally get what i want and not what they want me to have lol.
Unfortunately, parts for these things seem to be disappearing,, they’re in this weird stage to where they too old to have aftermarket parts.. but too new to be a classic truck and have aftermarket parts 😢.
Hardest part about the needles it’s just making sure they’re back in the right spots I got all of them right except my gas gauge got to go back for that…. As far as them not working I’m not sure, maybe they’re pressed into to far and rubbing the backing???
I think I remember seeing that one, didn’t realize the 5 speed had a higher rev tach. Check out eBay. Try searching something like “ s10 gauge overlay “
Red electrical tape lol, jk kind of. I keep blowing replacement door cards in half. They love separating at the middle. I've simply self tapped them to the door at this point. The middle hides in the "fur" so I gotvlucky there lol. Eventually I'll just glass them inside , maybe do the interior too/ did 20 years ago on one of my Xtremes. Pain in the neck but after some skimming and paint,(flex additive added) they held up long after I sold the thing. I was recently looking at a dash cap, it's hard , not the stupid rug. Mine hasn't cracked yet nut I know it will! #S10 #7, 1st ZR2
The tape was all I had at the time to finish the job and seem like a decent idea but it started peeling off lol. I’m going to get just some black vinyl to trim it out… i’d like to do a diamond plate pattern instead of that carbon but I can’t seem to find vinyl with that kind of look for some reason.
Sorry, For some reason the link is like a mile long… Just try googling “ S10 gauge overlay ” there’s a couple other ones floating around on eBay. Good luck.
Hey guys, Got some Links in the description. The gauge overlay might be hard to find.
Oh yes - sound deadener is amazing.
I used it when I built my 57 Beetle. The doors sound like a modern car when they shut. A nice thump & click of the latch.
That's cool! Don't count on modern cars being better, there's some thin flimsily doors out there. cough cough, honda odyssey I'm looking at you! 😜
Red reflective electrical tape! Love that stuff.
I've used the same stuff on motorbikes for trim effect, mainly rims and rear areas of bikes for extra night visuals. Stuff lights up like taillights do when someone gets behind you, and when applied to chrome parts or aluminum rims is damn near impossible to remove.
Nice, anything reflective is a good ideal for a bike. I’ve sense removed that vinyl stuff and the tape. Had issues with it sticking… I do have some ideals in the pipeline to snazz the door sides up still.
Keep making the ZR2 videos!!
Now that is SWEET!
Hell yeah! That turned out pretty shnazzy, my guy!
Nicee I am working on my manual 2003 zr2 s10 it’s fun
Stick shift would be cool!
Every thing else I have is stick so im ok with this being auto.
I got lucky and found a manual zr2, and I did a Solid axle swap on it. it's kinda like a little Tonka truck.
Disculpa como consigo. Para cambiarle los instrumentos del panel así como esos
Great video and info!! What type of front seat and console do you have in your truck? Thanks.
Thanks,Seats are out of a equinox, Console is just run-of-the-mill for that truck.
Can you tell me where you bought the gauge cluster and send the link if you can please?
At the time I just searched “ s10 gauge overlay “ mine was from some eBay listing. There should be something out there with some googling. Good luck.
Who sells the gage cluster
hey so i got this and need help i got it in and everything just need help wiring it up
What 4x6's you use in dash? I can't seem to find any that clear depth on drivers side, dang AC duct is in the way. I got a 02 ZQ8
All the speakers were kicker DS series. I remember the dash ones being a little weird with the fit, but it was close enough that I was able to make them work.
@@nicholsperformance92 Good to know this i wanted to go with all kicker ds series. But crutchfield was saying top mount depth was to deep. So TY for info now i can finally get what i want and not what they want me to have lol.
How did u find that on ebay, the cluster cover? I want one but can't find it.
Unfortunately, parts for these things seem to be disappearing,, they’re in this weird stage to where they too old to have aftermarket parts.. but too new to be a classic truck and have aftermarket parts 😢.
Do you plug the overlay into the fuse box or otherwise how do you plugin the lights on the overlay?
I think I just tapped into the power for the air bag switch light. It was the most convenient thing near by.
@@nicholsperformance92most bullshit idea ever invented
Can you post links to everything you used? I'm going to be redoing a 2000 Chevy S10 Extreme
Check out the description, just added some stuff in there. good luck on the build!
@@nicholsperformance92 Thanks.
Any video on installing the overlay and removing the needles? I just did this and now my needles wont move or work.
Hardest part about the needles it’s just making sure they’re back in the right spots I got all of them right except my gas gauge got to go back for that…. As far as them not working I’m not sure, maybe they’re pressed into to far and rubbing the backing???
Where did you get the passenger dash insert thats carbon fiber and says zr2 on it?
Oh, I just wrapped over the stock piece. not sure were I got the zr2 sticker its been a while.
Did you use the inverter or hard wire it ?
I set it to where I was happy with the brightness and then hid it in the dash.
Do they make that overlay with the 5spd tach? 6krpm
I think I remember seeing that one, didn’t realize the 5 speed had a higher rev tach. Check out eBay. Try searching something like “ s10 gauge overlay “
Can u post a link to that dash insert
try giving a search for s10 gauge overlay on eBay or Google. Shouldn’t be too hard to find one. The original listing link is gone.
where you buy?
Check the description, I got some details in there, most things were actually bought through Amazon at the time.
@@nicholsperformance92 thanks, but a don't find the link... :/
I can’t find any custom ones for a 1995 year old
Red electrical tape lol, jk kind of. I keep blowing replacement door cards in half. They love separating at the middle. I've simply self tapped them to the door at this point. The middle hides in the "fur" so I gotvlucky there lol. Eventually I'll just glass them inside , maybe do the interior too/ did 20 years ago on one of my Xtremes. Pain in the neck but after some skimming and paint,(flex additive added) they held up long after I sold the thing. I was recently looking at a dash cap, it's hard , not the stupid rug. Mine hasn't cracked yet nut I know it will! #S10 #7, 1st ZR2
The tape was all I had at the time to finish the job and seem like a decent idea but it started peeling off lol. I’m going to get just some black vinyl to trim it out… i’d like to do a diamond plate pattern instead of that carbon but I can’t seem to find vinyl with that kind of look for some reason.
Link for the cluster?
Sorry, For some reason the link is like a mile long… Just try googling “ S10 gauge overlay ” there’s a couple other ones floating around on eBay. Good luck.
Show the wiring setup not enough information at all
I was expecting a huge box with 2 12s because of all the sound deadening lol that’s what I got in my zr2 with no deadening 🫣
HaHa, part of doing all the was just to make the ride better. Plus that little sub shakes more than I thought... pretty happy with it.