@@MowersNBlowers yeah it's a thought, what could it hurt right, and then if the gasket is good, you can still check to see if the valves are seating correctly.
Love JB Weld and made a lot of repairs over the years... even repaired a deeply scored cyl on an antique Fairbanks Morse engine years ago and still runs good to this day. Project Farm loves his JB Weld too as we all do... couldn't live without it. Enjoy your weekend Henry... watch a rerun or something!
@@MowersNBlowers here is another pet safe www.acehardware.com/departments/lawn-and-garden/lawn-care/lawn-fertilizers/7279698?x429=true&gclsrc=aw.ds&&gclid=CjwKCAjwg6b0BRBMEiwANd1_SD9gD_SOnFhK3kU2QvNEvOkoJuAX1FEdVb1JGZvy0Hgsn6jP7ktawBoCBE4QAvD_BwE
@@MowersNBlowers i go out sometimes not much its hit or miss here with ppl with the masks and gloves at work they are only letting so many ppl in here at a time
In your "alternave voice" (Henry, why don't you just cut the rusted metal out?...)... JB Weld will justbtrap the Rust that is Preexisting! And won't allow a "Proper Seal" against the rotted material! Do you not have a HFT 110 Flux Core Welder yet? How can I send you money/product to make these repairs available? I'm not rich, but your channel makes me WANT to help others. Take care my EST Brother, 🤓 -Thomas Port Orchard, Washington (Just West of Seattle)
I know it has 75psi compression, but you didn't do a sort of leak down test, let it sit and see it the 75psl goes down over a few minutes to see if it has a head gasket or something leaking.
Sticking valve on the Murray mabey
No bro...in a previous episodes, I grinded the intake valve stem too much! I need new valves.
Now that 13.5hp briggs, you might want to check to see if it has a blown headgasket.... Just a thought.
That’s interesting...
@@MowersNBlowers yeah it's a thought, what could it hurt right, and then if the gasket is good, you can still check to see if the valves are seating correctly.
RobertKnighthawk man....but this murray can’t cut the line, 2 other Murray’s are in queue.
@@MowersNBlowers well that's cool, just keep it in the back of your mind for later.
Good day Yea when trying to start, noise from muffler sounded different. Might be easier to head gasket before taking motor out. Thanks
Love JB Weld and made a lot of repairs over the years... even repaired a deeply scored cyl on an antique Fairbanks Morse engine years ago and still runs good to this day. Project Farm loves his JB Weld too as we all do... couldn't live without it. Enjoy your weekend Henry... watch a rerun or something!
Nice work Henry!
Thx george
If you had put lime down in fall like i said with fertilizer your lawn wouldn't look like crap
No fertilizer for Boba!
@@MowersNBlowers milarginite is pet safe
@@MowersNBlowers www.lowes.com/pd/Milorganite-Slow-Release-36-lb-2-500-sq-ft-6-4-0-Lawn-Fertilizer/3069739 it all organic
@@MowersNBlowers and Epsom salt it great for grass also
@@MowersNBlowers here is another pet safe www.acehardware.com/departments/lawn-and-garden/lawn-care/lawn-fertilizers/7279698?x429=true&gclsrc=aw.ds&&gclid=CjwKCAjwg6b0BRBMEiwANd1_SD9gD_SOnFhK3kU2QvNEvOkoJuAX1FEdVb1JGZvy0Hgsn6jP7ktawBoCBE4QAvD_BwE
Hi Henry great video
Look like a productive day to me. it sucks about that 13 horsepower engine though but at least you got another one to swap out with it (identical)
Thanks John! How you holding up? People around your area wearing masks? You go out much?
@@MowersNBlowers i go out sometimes not much its hit or miss here with ppl with the masks and gloves at work they are only letting so many ppl in here at a time
Turning_wrenches85 well, you need to be safe bro! If you’re near people, they may infect you!
@@MowersNBlowers yea it sucks it my line of work tho
Head gasket.
Nope. Sold a year ago.
Would've dried faster if you pointed your heat at it
Not fast enough to paint it! Can’t heat it for a few minutes to get the full 24 hour curing. I’m in no rush bro!
Did you re-check oil on wheelhorse?
No, I forgot, I'll recheck tomorrow when I finish the damn deck!!
In your "alternave voice" (Henry, why don't you just cut the rusted metal out?...)...
JB Weld will justbtrap the Rust that is Preexisting!
And won't allow a "Proper Seal" against the rotted material!
Do you not have a HFT 110 Flux Core Welder yet?
How can I send you money/product to make these repairs available?
I'm not rich, but your channel makes me WANT to help others.
Take care my EST Brother,
🤓 -Thomas
Port Orchard, Washington
(Just West of Seattle)
Lol, yeah...I’m just making it presentable before mando brings me the new deck. All I’m doing is redundant!
Paypal.me/mowersnblowers
My friend My Friend have Patients I’ll bring you that deck
No rush. I have to wait for a deck belt anyways.
What word is carved in paint on the black tractor you put tranny fluid in it ren somthing
Someone’s name was etched into it
Did u sell tractor?
Not yet...dude just came in an Audi just to check it out!
Mowers N Blowers ah I kind of hate those people, who just come to take a look, it ain’t a car. Either be ready to pick up, if you don’t like go home
Same! But no big deal for me... just leave the tractor there... if they want it, good, I didn’t have to do anything
You can tell if they’re serious or not!
Next time for small holes try using two-part Putty for steel
I know it has 75psi compression, but you didn't do a sort of leak down test, let it sit and see it the 75psl goes down over a few minutes to see if it has a head gasket or something leaking.
Every time you use chrome sockets on your impact I scream a little. lol
I have black ones too! But honestly bro... never had a problem! It’s not the space shuttle
@@MowersNBlowers ha ha taryl dactyl here