XIAOMI Mi Air Purifier 3H /Air Purifier 2S - 0% filter remaining - HACK RFID ! 100% WORK
Вставка
- Опубліковано 26 сер 2024
- XIAOMI Mi Air Purifier 3H - 0% filter remaining - HACK 100 % WORK
#xiaomi
#AirPurifier3H
#filter
#oczyszczacz
#reset
#xioami
#filters
#hack
#reset2022
#substitutes
#rfid
#substitutes Xioami
#hack
#Purifier3H
#test
#czyszczenie
#zmiana
#restoration
#reset2022
#filtr powietrza
#xiaomifilter
#modified
#0% xioami
#Xiaomi Air Purifier 2S
resetowanie filtra Xioami Mi Air Purifier 3H
Oczywiście zalecam wymianę filtra na nowy ;)
Pomogłem? zostaw Łapkę :)
Xioami Mi Air Purifier 3H filter reset
Of course, I recommend replacing the filter with a new one;)
I helped? leave the Paw :)
street fighter ultimate combos are less complicated than that ^^
This is not my fault IT must be done on this way 🙂
😂😂😂
U mnie zadzialalo to:
Here is right solution:
1) Remove the air purifier from Mi Home.
2) Disconnect the unit from power.
3) Press and hold the button on the rear of the purifier while reconnecting power.
4) Continue holding the button until the unit beeps. The unit displays some information about EEPROM.
5) Press the front button ONCE.
6) Press and hold rear button for 5 sec
7) Unplug from power. Wait a few seconds and plug back in.
8) Add back into Mi Home
This worked perfectly in 2 mins!! Thank you!
Worked like a charm
bro, it worked like a charm. Thanks
this works..nice..xiaomi 3H purifier..maybe that's why they no longer sell this unit..
Muchas gracias! Funciono y en menos de 1 minuto lo hice todo
Thanks ! Worked for Xiaomi Smart Air Purifier 4 as well.
faster method - just hold power button and display button until you hear three beeps, then release display button while still holding power button and then press display button again. then release all buttons and wait for that screen. then press display button to reset and wait for only "wifi" text on display. then unplug it and plug it again.
👍
Thanks, works on my 3H
Best!
Perfect, works on my H3
Not sure how i did it but it went a lot faster. I couldn’t accept it required that many pointless steps so i tried it my way. This is how i did it but im sure it also has needless steps but here goes: while its on hold both buttons until you hear it beep 3 times (~30sec) then turn it off and do the same again. You should be able to hear it beep another 3 times. Turn it on and then pull the cable. Voila! Next time ill try to do it without bizarre ‘pull the cable’ move. If anyone finds a shorter instruction, do share.
that's great, then make a short video so you don't make senseless steps as you wrote it. I'm sorry you had to watch my video and I took 3 minutes of your life. I hope you can find a shorter version, preferably a 30 second one. You can always buy a new filter and replace it, then it will only take 15 seconds
@@IbizaSP Dude 😂 why take it personal?! I just shared what i learned so you can do it easier in the future. Sorry i took away something you could brag about 😂 now you’ll think of me everytime you reset your filter MY way!
I cleaned my filter with clean water without using any soap or cleaning liquid, just warm water, after that did same reset like on video but just three times beeep, unplugged cabel from wall, plug in again, did three times when got all info on display, unpluged again and it works perfectly, its showing filter 100% so no need to replace it, just wash and make sure its dry before you put filter back on its place
Working perfectly no need to do too much just press both buttons untill 3 times beep sound then press on button and pull the plug .thats all
This video is authentic. My purifier has a top button instead of a built in screen button but still this worked in the third time
Tnx, it worked for Purifier 3C.
If you’ve never used an air filter these are great. ua-cam.com/users/postUgkx_dppjvjF8BYEmPSDTcgCUdRsgWYLXNHN I ended up with three after starting out with one. The noise level depends on the 1-3 settings with how hard you want the machine to work. You can also upgrade the filters and get one better for pet hair and smells which is a must have in my home. I noticed the air seemed lighter and easier to breathe when running the machine for the first time. Works great every time. Highly recommended!
Myślałem, że jedyna opcja to wyjąć filtr i zmieniać dane z tagu RFID na komputerze 😂
Dzięki mordo! Oszczędziłeś mi czasu na zabawy z tym 💪
Ja robię to inaczej. Pod filtr wkładam folię aluminiową i znów mam 100 procent :) Pisze że mam nieoryginalny filtr ale tylko na początku.
Worked! Thanks bro I did little different
Turned it on then Press and hold both display and back button until I heard the beep.
Then display screen button to turn it off.
Then simply pressed both button for 4 consecutive “beep beep beep” and voila entered that screen.
Thanks
Tried it three times and it finally worked Thanks Dude 👍
Works with Xiaomi Air Purifier 2S. Thank you - you are great :)
Holy cow. It actually worked. You just have to set it up again. Thanks!
I finally found it for Pro H!!!
Press the Display button on the front and the Filter Compartment Cover button (!!!) on the back at once for a while and the reset display will be shown. The rest is the same, push Display button, wait until the texts disappear, unplug and replug.
I really found it after my efforts. You're perfect buddy. You are talking about the opening button of my rear filter cover in the Pro H model.
holy moly it worked not expected , shit man thought i have to spend 2500 inr, now i am just going to clean and re insert filter, thanks bro
I do not really understand to follow the steps 😁
thank you for this awsome video, it worked by the first time (3h)
Thanks man!! It's a little complicated but I did it 😃
Genius Thx a lot , I will not buy new filter .
It’s work! Thank you ❤
It actually worked, thank You!
fantastic. This works perfectly. Do you have instructions for 3C?
👍 from Belgrade,Serbia.
Aluminium under the 3c.
It’s working!!! Thanks🙏
I don't see the point in doing this... You are still filtering your air through the same dirty filter... My solution: do nothing, the purifier is still filtering even though the display says 0%... Simply ignore the display...
Thank you, it worked
Thank you very much.
THANKS!
Mine is 3c and I have only 2 bottoms. How can I reset?
Yeah! It's work! Thanks man!
1:03-04 "release the display button and hold" but you release power button.... why?
This is how it worked for me with Xiaomi Smart Air Purifier 4 Compact EU
Shut off device.
Take the filter out, clean at least the primary outer filter with a brush or vacuum cleaner. (Mine was full of fine dust after just one month of use!)
Put the filter back
Long press Power on touch screen
and voilà: 100% 🙂👍
Air purifier 3 H albo coś robię źle albo na tym modelu nie działa
Hat geklappt beim 3H . Danke
OMG it worked 100% ❤❤❤
Thanks.. Its work
It works.
masz piwo... works
Great worked for me!
Seems like this one suffers from pixel burn as well... I have the Smartmi purifier and the display looks horrible after one year of operation.
it’s work thanks man
It works thank you
Me parece muy lioso cómo lo explica él...básicamente tenéis que apretar delante y detrás hasta que hace 5 veces los 3 pitidos, después botón de encender, cuando solo aparece la palabra WiFi desenchufar, enchufar y voilà....al encender saldrá 100 de filtro
It works!
Thanks for this trick.
So the question is why we have to do this as the percentage is showing the filter is supposed to be replaced?
And we need the air to be purified as good as it could be in the first place, don't we?
That is why we buy this air purifier.....
correct. the film aims to show how the filter can be reset, in the description of the film I wrote that it is better to replace the filter with a new one because the longer time of using the filter will catch various bacteria and fungi.
Why make do they make it so complicated? surely the machine can pick up if a new filter has been fitted?
working 🙏🏻
Hallo, tolle Anleitung aber ich bekomme es nicht hin, kannst du es eventuell als Anleitung schreiben? Danke
Hallo, ich weiß nicht viel, was los ist, können Sie es klarer machen? "Google translate - sorry"
👍👍👍👍👍👍👍👍👍👍👍It's works
worked like a charm
Few attempts, final succesfull but a little bit different (lasted much shorter to the Final screen) don't know why, but success matters :)
Hat funktioniert danke dafür
Not working...
Try
@@IbizaSP If he said it doesn't work, he has tried it.
@@tamaszlav I meant that he should try again
Tekken combo moves are easier
100% working! Great hint 👍 thx!
Confusing and too many extra steps resetting.
Działa z Xiaomi Air Purifier 2S. Dziękuję jesteś wielki :)
Will try this!
it works like this on my purifier
Ciekawe czy działa z XIAOMI Mi Air Purifier PRO?
Hmm, zawsze można sprawdzić 🙂
I finally found it!!!
Press the Display button on the front and the Filter Compartment Cover button (!!!) on the back at once for a while and the reset display will be shown. The rest is the same, push Display button, wait until the texts disappear, unplug and replug.
What a way to lie to yourself, that the purifier is still at 0%. How is this helpful? What if my grandma believes this BS. 🤣
Worked for me? So
@@z3ro7o but the filter is still on 0%, how can a 0% filter smoke and other particles? ;) i think after the hack it cant clean the rooms completly or?
@@teLmi if you use it alot with crazy conditions yes its over fast. but we use it all normal. and the owner want you to use it fast so they can sell new filters. 100% works for 2 years
Ага,забитый грязью фильтр😆
Czy to jest procedura factory reset?
Tego nie wiem, wiem że resetuje filtr.
showing full 100% and dirty as F
You can do it in App Xiaomi Home in only one step 🤷🏻♂️
How?
😂😂😂 there is an easier way
What is these
So bad music!! 👎
Click my Video, Turn Off music and turn on XIAOMI Mi Air Purifier.... ;-)