Відео

Tnx, it worked for Purifier 3C.

Thanks ! Worked for Xiaomi Smart Air Purifier 4 as well.

Tekken combo moves are easier

Whow! Podpisuję się pod słowami kolegi - ujęcia, montaż - SZTOS! Brawo! 👏👏👏💪😉

THANKS!

holy moly it worked not expected , shit man thought i have to spend 2500 inr, now i am just going to clean and re insert filter, thanks bro

😂😂😂 there is an easier way

Do yourself a favour, ditch this garbage piece of an equipment. The worst money I ever spent in my life. Total shite

Thank you, it worked

It works.

Genius Thx a lot , I will not buy new filter .

Hat funktioniert danke dafür

It works!

OMG it worked 100% ❤❤❤

If you’ve never used an air filter these are great. ua-cam.com/users/postUgkx_dppjvjF8BYEmPSDTcgCUdRsgWYLXNHN I ended up with three after starting out with one. The noise level depends on the 1-3 settings with how hard you want the machine to work. You can also upgrade the filters and get one better for pet hair and smells which is a must have in my home. I noticed the air seemed lighter and easier to breathe when running the machine for the first time. Works great every time. Highly recommended!

It’s work! Thank you ❤

Why make do they make it so complicated? surely the machine can pick up if a new filter has been fitted?

worked like a charm

I finally found it for Pro H!!! Press the Display button on the front and the Filter Compartment Cover button (!!!) on the back at once for a while and the reset display will be shown. The rest is the same, push Display button, wait until the texts disappear, unplug and replug.

Worked! Thanks bro I did little different Turned it on then Press and hold both display and back button until I heard the beep. Then display screen button to turn it off. Then simply pressed both button for 4 consecutive “beep beep beep” and voila entered that screen. Thanks

👍👍👍👍👍👍👍👍👍👍👍It's works

Confusing and too many extra steps resetting.

I don't see the point in doing this... You are still filtering your air through the same dirty filter... My solution: do nothing, the purifier is still filtering even though the display says 0%... Simply ignore the display...

fantastic. This works perfectly. Do you have instructions for 3C? 👍 from Belgrade,Serbia.

Mine is 3c and I have only 2 bottoms. How can I reset?

Thanks man!! It's a little complicated but I did it 😃

thank you for this awsome video, it worked by the first time (3h)

Ага,забитый грязью фильтр😆

Me parece muy lioso cómo lo explica él...básicamente tenéis que apretar delante y detrás hasta que hace 5 veces los 3 pitidos, después botón de encender, cuando solo aparece la palabra WiFi desenchufar, enchufar y voilà....al encender saldrá 100 de filtro

What a way to lie to yourself, that the purifier is still at 0%. How is this helpful? What if my grandma believes this BS. 🤣

It actually worked, thank You!

Holy cow. It actually worked. You just have to set it up again. Thanks!

Working perfectly no need to do too much just press both buttons untill 3 times beep sound then press on button and pull the plug .thats all

U mnie zadzialalo to: Here is right solution: 1) Remove the air purifier from Mi Home. 2) Disconnect the unit from power. 3) Press and hold the button on the rear of the purifier while reconnecting power. 4) Continue holding the button until the unit beeps. The unit displays some information about EEPROM. 5) Press the front button ONCE. 6) Press and hold rear button for 5 sec 7) Unplug from power. Wait a few seconds and plug back in. 8) Add back into Mi Home

This is how it worked for me with Xiaomi Smart Air Purifier 4 Compact EU Shut off device. Take the filter out, clean at least the primary outer filter with a brush or vacuum cleaner. (Mine was full of fine dust after just one month of use!) Put the filter back Long press Power on touch screen and voilà: 100% 🙂👍

THATS STUPID ! TOTALLY ! YOU ARE BASICALY CHEATING YOURESELF :) SO YOU ARE TELING YOURESELF THAT THE FILTER IS 100% AND YOU ACTUALY KNOW DIDNT FILTER A SHIT SO WERES THE TRICK SMART AS?

This video is authentic. My purifier has a top button instead of a built in screen button but still this worked in the third time

Thanks for this trick. So the question is why we have to do this as the percentage is showing the filter is supposed to be replaced? And we need the air to be purified as good as it could be in the first place, don't we? That is why we buy this air purifier.....

It works thank you

Air purifier 3 H albo coś robię źle albo na tym modelu nie działa

I cleaned my filter with clean water without using any soap or cleaning liquid, just warm water, after that did same reset like on video but just three times beeep, unplugged cabel from wall, plug in again, did three times when got all info on display, unpluged again and it works perfectly, its showing filter 100% so no need to replace it, just wash and make sure its dry before you put filter back on its place

faster method - just hold power button and display button until you hear three beeps, then release display button while still holding power button and then press display button again. then release all buttons and wait for that screen. then press display button to reset and wait for only "wifi" text on display. then unplug it and plug it again.

Not sure how i did it but it went a lot faster. I couldn’t accept it required that many pointless steps so i tried it my way. This is how i did it but im sure it also has needless steps but here goes: while its on hold both buttons until you hear it beep 3 times (~30sec) then turn it off and do the same again. You should be able to hear it beep another 3 times. Turn it on and then pull the cable. Voila! Next time ill try to do it without bizarre ‘pull the cable’ move. If anyone finds a shorter instruction, do share.

Few attempts, final succesfull but a little bit different (lasted much shorter to the Final screen) don't know why, but success matters :)

Seems like this one suffers from pixel burn as well... I have the Smartmi purifier and the display looks horrible after one year of operation.

Great worked for me!

1:03-04 "release the display button and hold" but you release power button.... why?

Hallo, tolle Anleitung aber ich bekomme es nicht hin, kannst du es eventuell als Anleitung schreiben? Danke