Yes Sir! 👍🏿 Good look on the extra throttle. Man you're gonna have thousands of people following your XP Mod, because so far, you're like the only one on UA-cam with a video detailing what's needed and how to set it up!💪🏿💪🏿💪🏿
Did this exact build couple months back. Adding the PAS system for the 2nd motor to the setup is worth it. For some reason it adds close to 5mph to top speed as soon as the sensor senses movement. The pamphlet sort of explains it. Playing Russian roulette without a torque arm or 2 though.
Good update. I put a torque arm on my trike as I have a curved front fork and easier for the motor to pull out.. Slime working for my EUC tires so far. Cheers
Thanks for the update, and you can always get a left hand throttle so they twist in the same direction. Pinch flats are usually from under inflation and going up curbs. I run 18 psi minimum in the back, and when I go up curbs, I pop up the front, then rock my weight forward so the back takes less of a hit. Just a habit from my skinny tire days, lol. Tannus Armour protects from rim cuts and regular flats, and they have 20" fat tire liners available now.
I practice those same habits, I need better lighting for night rides so I can see those potholes coming. Might have to go with a heavy duty inner tube and armor dilloz slime.
Amazing work from a legend! The Gizz, who rode in LA East with the Lectric XP as stock before ever adding any mods! On your next ride you gotta show off the throttle setup.
@@urbangrizzly3709 The video below also shows another way to add a thumb throttle: ua-cam.com/video/diK3JEDaWQc/v-deo.html The thumb throttle is made from rubber so it's very comfortable fairly cheap, and easy to install
There’s a good video on UA-cam for adjusting these XP brakes to eliminate squeaks, etc. you loosen the bolt where the caliper mounts then squeeze and hold the brake lever and then tighten it back up. Lines it up good. Maybe you seen it? There’s an adjustment for the immovable pad on the inside too. Bring that one out to where the caliper just clears the immovable pad. 💯
Bro I just made the transformation on my XP.... WOW what a difference! im not gonna lie my bike was collecting dust until i saw your video. my bike has new life! Maybe i might see you at LAESK8 again
Great update. I was wondering what you were going to do with the rear motor throttle. Also, love the thumb throttle...need to order one. Inside the bag, are you using any kind of foam or insulating materials between it and the battery and controller?
The left throttle was the stock throttle, I just relocated it to the left. The red thumb throttle attachment I got from randy rides. @randyr if you have Instagram.
I bought torque arms just in case--but I was told by the folks that make monarch AWD that retail ebike frames can handle most hub motors under 1500 watts.I am doing this to mine and after years of mountain bike riding--seeing folks jump things that put many times the pressure then these motors will--will let the bike shop decide.Only reason I am considering is i trail ride and want the bike to last many years with no problems.I have seen forks bend over the years but never have seen one actually break--And i went with mountain bikers that were jumping very far ramps and going fast on very very rough terrain.I plan on no jumping and going slow on rough terrain--at a stage where I want to enjoy a bike and not be compettive or do risky things on it.
I been looking and I have yet to see a motor mod upgrade on a Lectric XP 2.0 The mod you and randy rides do are they only for the first Lectric XP model?
@@liDanTheManil definitely feels like that’s what they were going for on the 2.0, the 1.0 was the best option for modding. As soon as they launched the 2.0 they discontinued the OG bike.
Hey bro! I am loving your bike. I just did my Mod on my Ridel Trister, I was wondering if you can help get one of that Throttle you got. I will pay for it
@@urbangrizzly3709 Weirdest thing if I tried to move the video forward with my finger on screen moving it forward I could see a picture as soon as I take my finger off screen back to green.
I’m happy to say that I have finished designing and developing the new thumb throttle. I am taking preorders, so if you are interested, please send me an email (randy@decod3d.com).
I’m happy to say that I have finished designing and developing the new thumb throttle. I am taking preorders, so if you are interested, please send me an email (randy@decod3d.com).
@@urbangrizzly3709 Good to hear. My motor is getting delivered today. Gotta love 2 day shipping! Did you go with the HB100 brakes? That’ll be my next purchase.
Yes Sir! 👍🏿 Good look on the extra throttle. Man you're gonna have thousands of people following your XP Mod, because so far, you're like the only one on UA-cam with a video detailing what's needed and how to set it up!💪🏿💪🏿💪🏿
Did this exact build couple months back. Adding the PAS system for the 2nd motor to the setup is worth it. For some reason it adds close to 5mph to top speed as soon as the sensor senses movement. The pamphlet sort of explains it. Playing Russian roulette without a torque arm or 2 though.
Did you install the PAS sensor on the opposite side?
Urban Grizzly !! I Live On The East Coast And I Wish I Live In L.A To Ride With LAESK8 .. You All Have The Best Group Rides .. Thank To Sawyer ...
West coast has the best weather!
Yea Sawyer started something dope 👌🏾
Good update.
I put a torque arm on my trike as I have a curved front fork and easier for the motor to pull out..
Slime working for my EUC tires so far.
Cheers
I put tire slime in but I'm gonna try the armor dilloz brand, I hear its pretty tough
Thanks for the update, and you can always get a left hand throttle so they twist in the same direction. Pinch flats are usually from under inflation and going up curbs. I run 18 psi minimum in the back, and when I go up curbs, I pop up the front, then rock my weight forward so the back takes less of a hit. Just a habit from my skinny tire days, lol. Tannus Armour protects from rim cuts and regular flats, and they have 20" fat tire liners available now.
I practice those same habits, I need better lighting for night rides so I can see those potholes coming. Might have to go with a heavy duty inner tube and armor dilloz slime.
I put thorn resistant tubes, slime and tuffy tyre liners on my bike.
Amazing work from a legend! The Gizz, who rode in LA East with the Lectric XP as stock before ever adding any mods! On your next ride you gotta show off the throttle setup.
I want to see this too! Get that flat fixed! 😆
@@RandyRides Grizz and Randy doing good things for the Lectric Community!!
Gotchu!👊🏾
The throttle setup is nice!! 👊🏽
Ekfjfi
Had to holla at Randy when I saw your video.
@@urbangrizzly3709 Glad you did 👍🏻
@@urbangrizzly3709 The video below also shows another way to add a thumb throttle:
ua-cam.com/video/diK3JEDaWQc/v-deo.html
The thumb throttle is made from rubber so it's very comfortable fairly cheap, and easy to install
I fuckin love all the modders on the scene, it's cyberpunk af. I don't even have an ebike yet but I love seeing all this stuff.
There’s a good video on UA-cam for adjusting these XP brakes to eliminate squeaks, etc. you loosen the bolt where the caliper mounts then squeeze and hold the brake lever and then tighten it back up. Lines it up good. Maybe you seen it? There’s an adjustment for the immovable pad on the inside too. Bring that one out to where the caliper just clears the immovable pad. 💯
Killer mod brother just did it to my ecotric. It got serious power i live at beach in Atlantic city no problem riding on beach
Bro I just made the transformation on my XP.... WOW what a difference! im not gonna lie my bike was collecting dust until i saw your video. my bike has new life! Maybe i might see you at LAESK8 again
Yea man LAESK8 kicked my ass until I did the mod, I'll be back out there soon.
Hell yea!
Hey man, how you like that bike seat? I just bought and Aventon Sinch Ebike road 15 miles and ass hurts, looking to get a new seat.
Much better than stock, but not the best option. Just ordered a cloud 9 to see which is better
You should go for the front fork upgrade soon, not even that costly either - videos on here showing how.
Yeee almost 700 subs boii, that thing is a beast!
It IS a beast! I can’t wait to do this upgrade!
In the final stretch now...
You thinking about adding a front suspension fork and/or a new handlebar?
Definitely a front suspension fork.
Great update. I was wondering what you were going to do with the rear motor throttle. Also, love the thumb throttle...need to order one.
Inside the bag, are you using any kind of foam or insulating materials between it and the battery and controller?
I need to use something to separate them, the controller is scratching the battery.
Did you have to modify anything to fit the big tires on there?
Would be nice if there was a way to accelerate front & rear simultaneously from one accelerator. Look's like a killer upgrade tho. Thanks for sharing.
I push both works fine
Let us know what is going on with the pinch flats. You're right it aint just you. I definitely want to see if you have to work on the fork.
The Fat Tire Trap...Flat Magnets.
@@allenschmitz9644 do you think under/over inflation is a factor?
If you can can you please tell me what kit you got your left throttle with
The left throttle was the stock throttle, I just relocated it to the left. The red thumb throttle attachment I got from randy rides. @randyr if you have Instagram.
Looking Great! Nice work Sir... Are you still using the same controller?
2 separate controllers for front and rear. No rewiring and no risk of overheating
I bought torque arms just in case--but I was told by the folks that make monarch AWD that retail ebike frames can handle most hub motors under 1500 watts.I am doing this to mine and after years of mountain bike riding--seeing folks jump things that put many times the pressure then these motors will--will let the bike shop decide.Only reason I am considering is i trail ride and want the bike to last many years with no problems.I have seen forks bend over the years but never have seen one actually break--And i went with mountain bikers that were jumping very far ramps and going fast on very very rough terrain.I plan on no jumping and going slow on rough terrain--at a stage where I want to enjoy a bike and not be compettive or do risky things on it.
I been looking and I have yet to see a motor mod upgrade on a Lectric XP 2.0
The mod you and randy rides do are they only for the first Lectric XP model?
There’s a guy that modded his lectric xp 2.0’s but he had to lace his own rims in order for it to fit.
@@urbangrizzly3709 is it me or did Lectric make the 2.0 to stop ppl from doing basic motor upgrades? If so that's really low
@@liDanTheManil definitely feels like that’s what they were going for on the 2.0, the 1.0 was the best option for modding. As soon as they launched the 2.0 they discontinued the OG bike.
Adding a mid drive motor would probably be the next best option for the 2.0
And i put shocks on front wheel you should to it makes big difference in ride ecotric has them in stock for 95 bucks
$95 🤔🤔, I'm gonna take a look at those
I be waiting Every for you to drop some videos for shit breh! #Xpgang
Let’s get it 💯
Bro save alot time and money. And get armor dilloz tire sealant.
@Telephone Tales Yes
Will it prevent pinch flats?
@@urbangrizzly3709 Flats period.
UA-cam armor dilloz
@@Ray_Entertainment gonna try this
Hey bro! I am loving your bike. I just did my Mod on my Ridel Trister, I was wondering if you can help get one of that Throttle you got. I will pay for it
I got mines from Randy Rides, check him out, here's the link 👍🏾
ua-cam.com/users/RandyRides
Thanks brotha. I will see one day at LAESK8.
@@BobDesir fasho 👊🏾
I CAN ONLY SEE A GREEN SCREEN! I was looking forward to see your new video
Can't view the video?
Me too. Green Only
@@1cosmocat the one time I use my iPhone wow. I'll just stick with the gopro.
@@urbangrizzly3709 Weirdest thing if I tried to move the video forward with my finger on screen moving it forward I could see a picture as soon as I take my finger off screen back to green.
I hate flats. Hate them more if its the hub motor. As you can not remove the wheel with the cables tie to the frame.
Yea its going to the bike shop this time, don't have the patience to do it again lol
Cut inner tube in half and then wrap inner tube never ever get flats
how can contact randy rides,you cant send pm in UA-cam,does he have a Instagram?
Instagram: @randyr
I’m happy to say that I have finished designing and developing the new thumb throttle. I am taking preorders, so if you are interested, please send me an email (randy@decod3d.com).
Where do we go from here? Are you selling? If so, shut up and take my money.
🤣 man people been hitting me up about selling like crazy
I’m happy to say that I have finished designing and developing the new thumb throttle. I am taking preorders, so if you are interested, please send me an email (randy@decod3d.com).
First!
Did I forget to send you the hardware? 🤦🏼♂️ I’ll send you an extra one when I send out my updated thumb throttle (hopefully that’s done soon).
Yea lol, but the zip tie works fine.
Nice work randy.
@@urbangrizzly3709 Good to hear. My motor is getting delivered today. Gotta love 2 day shipping! Did you go with the HB100 brakes? That’ll be my next purchase.
@@eastfam9516 Thank you!