جناب آپ نے بہت اچھی ویڈیو بنائی ہے۔ اللہ آپ کو بہترین ویڈیوز بنانے کے لیے مزید وقت دے۔ آپ کم ویڈیوز بناتے ہیں، لیکن آپ اچھی ویڈیوز بناتے ہیں۔ براہ کرم بنیادی الیکٹرانکس پر مزید ویڈیوز تیار کریں۔
Great tutorial! How did you get a hold of the OFW 4.90? I have a bricked CECH-4301C (unable to boot safe mode) that needs some patching on a terrible dump. I've looked everywhere I could, but found nothing. Thank you! :)
Hello, do you maybe have an Idea whats wrong with my xbox one. When i turn it on it shuts down after 10-30min. I checked it with other APU and still the same. I checked another front panel and it still shuts down and you can hear the beep. There is also no dust in there its very clean and it is not warm or hot.
Would you help me? I made a nor dump of a ps3 fat and in the list it said BAD Data match check, I thought it wouldn't be a problem so I recorded it on the chip, now the ps3 turns on and is stuck in the green light, can you tell me if there's a way to fix it somehow ?
Hi. I have phat model CECHL with ver-001 board. My case is: no image (both channels), no entry to recovery mode, but indicator lights green. And no power on usb ports. Is it nor issue, and what can i do to fix it? PS: i don't know console history from previous owner
Hello, I have a question, with the E3 flasher I can unbrick a PS3 Slim with YLOD due to a bad installation of xploit, but I do not have the support of the NOR, can I unbrick it?
Hi there! Unfortunately, if you don't have a backup of the NOR, it becomes much more challenging to unbrick a PS3 Slim with YLOD caused by a bad installation of xploit. The E3 flasher can help if you have a valid NOR backup, as you can flash it back to restore the console. Without the backup, though, the process is much riskier, and there's no guarantee of recovery. If you try it, make sure to proceed with caution and be aware of the potential risks. Good luck!
Good afternoon, Mr. Idrees, I send you from Venezuela and I have a question. I have a blue ps3 super slim and it has a corrupt nort, error 8002f147, and I saw a video where I fixed a slim model with a red screen and it was cfw compatible. I can follow these steps to repair the nor from play I only have the doubt because it is not compatible with cfw my blue super slim
Hello Master 😊
I got too excited when I get notified you upload a video!
Greetings from Colombia. 🇨🇴
جناب آپ نے بہت اچھی ویڈیو بنائی ہے۔ اللہ آپ کو بہترین ویڈیوز بنانے کے لیے مزید وقت دے۔ آپ کم ویڈیوز بناتے ہیں، لیکن آپ اچھی ویڈیوز بناتے ہیں۔ براہ کرم بنیادی الیکٹرانکس پر مزید ویڈیوز تیار کریں۔
Rizwan bhai aap ki hi chhal rahi hy.
Thanks for the video sir, BTW can I use a FT232RL module instead of a teensy ?
No dear.
Great tutorial! How did you get a hold of the OFW 4.90? I have a bricked CECH-4301C (unable to boot safe mode) that needs some patching on a terrible dump. I've looked everywhere I could, but found nothing. Thank you! :)
To perform the same process, you must use the CosOFW490.bin patch.
Hello, do you maybe have an Idea whats wrong with my xbox one. When i turn it on it shuts down after 10-30min. I checked it with other APU and still the same. I checked another front panel and it still shuts down and you can hear the beep. There is also no dust in there its very clean and it is not warm or hot.
Would you help me?
I made a nor dump of a ps3 fat and in the list it said BAD Data match check, I thought it wouldn't be a problem so I recorded it on the chip, now the ps3 turns on and is stuck in the green light, can you tell me if there's a way to fix it somehow ?
Please Make a video on how to use uart on ps3 phat model
Sure, I will.
@@idreestech thanks, may Allah bless ur hardworking
Very good lesson, thank you very much
hello sir it is very difficult to do.
but this is very fun because my hobby is repair
Hi. I have phat model CECHL with ver-001 board. My case is: no image (both channels), no entry to recovery mode, but indicator lights green. And no power on usb ports. Is it nor issue, and what can i do to fix it? PS: i don't know console history from previous owner
You have to check it with TTL UART.
@@idreestech check syscon errors via rs232rl convertor?
Yes.
Hello, I have a question, with the E3 flasher I can unbrick a PS3 Slim with YLOD due to a bad installation of xploit, but I do not have the support of the NOR, can I unbrick it?
Hi there! Unfortunately, if you don't have a backup of the NOR, it becomes much more challenging to unbrick a PS3 Slim with YLOD caused by a bad installation of xploit. The E3 flasher can help if you have a valid NOR backup, as you can flash it back to restore the console. Without the backup, though, the process is much riskier, and there's no guarantee of recovery. If you try it, make sure to proceed with caution and be aware of the potential risks. Good luck!
Hello when i try to patch with 4.90 in ps3 dump checker with file provided by you it shows 3 error with new patch file. Please help
Please join me on Facebook for a video share with the said issue.
Hello!
Do you have CosOFW files for latest 4.91?
I have 4.90. You can search for 4.91 on Google to learn more." Russian forums.
Sir ek video ps4 ki power supply ripair ki banaiye plz🎉
Thank you for the request! I'll definitely consider making a video on how to repair a PS4 power supply. Stay tuned, and I'll try to get it up soon! 🎉
Good afternoon, Mr. Idrees, I send you from Venezuela and I have a question. I have a blue ps3 super slim and it has a corrupt nort, error 8002f147, and I saw a video where I fixed a slim model with a red screen and it was cfw compatible. I can follow these steps to repair the nor from play I only have the doubt because it is not compatible with cfw my blue super slim
Dear, this tutorial is exclusively for non-CFW so you can try it.
Sir, could you please solder it to my ps3 motherboard?
Sure dear I’ll.
i have Teensy ++2.0 how can i use it for read Syscon error?
In order to access the syscon error codes, a UART should be utilized.
@@idreestech
I mean can i access to syscon just by Teensy?
Master for you, what's the most reliable ps3 model?
25xx series
Nice try, but it looks like the fee will be a donor.Thank you, Master. Hello from Russia.
Hey can you help us Please we need the 4.91 CosOFW File or can you send a link to the forum please??????????????
github.com/littlebalup/PyPS3tools/tree/master/PyPS3patcher/patches
I found a link, you can download and try it. Need not to rename it.
@@idreestech thank you
@DelixDex my pleasure!
My pleasure!
Pls which window you're use UART ? My own window 10 UART no working ?
I am on Win 7 dear.
@@idreestech thank you
Thanx master ❤️🇹🇷
Boss 1number
أحسنت أخي الرابط البرنامج
ترجمه عربي 😂
قامت Google بالفعل بترجمتها إلى اللغة العربية. فقط انقر فوق علامة التبويب التسمية التوضيحية.
Nice try master just do a cpu swap
As it has a key code so not that easy.
Just buy a new ps3 this shit isn’t worth it
🌹
great work bro , but there is something missing that we can't find the CosOFW490.bin patch And CosOFW488.bin patch , can you help with that ??
The link is given in the description!