Good.... .... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
To reset rccb- off isolator switch and mcb's, rccb on cheyuka Then isolator on cheyuka... Rccb veendum trip ayillenkil one by one mcb on cheythu oro sub circuit check cheyuka.
Pls make a video about earthing. Different types, new tech to increase conductivity(earthing compounds), earthing pipe/rod selection(ie length) pit size, how to improve earthing after installing pipe etc...
RC CB ട്രിപ് ആയാൽ ആദ്യം ചെയ്യേണ്ടത് ഐസോലേറ്ററും, മുഴുവൻ എം സി ബി ക ളും ഓഫ് ചെയ്യുക, ശേഷം ആർ സി സി ബി ഓൺ ചെയ്ത് ടിപ് ആകുന്നില്ല എന്ന ഉറപ്പ് വരുത്തി ഐ സെലേറ്റർ ഓൺ ചെയുക, ഐസൊലേറ്റർ ഓൺ ചെയ്യുമ്പേൾ RCCB ട്രിപ്പായാൽ N. E, ചെക്ക് ചെയ്യുക, ട്രിപായില്ല എങ്കിൽ എം സി ബികൾ ഓരോന്നായി ഓണാക്കി ട്രിപ്പായ സർക്യൂട്ട് കണ്ടെത്തി ചരിഹരിക്കുക അനസ് എ കെ
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
MCB,RCCB,Isolater,off ചെയ്യുക, പിന്നീട് lsolateron ചെയ്തശേഷം rccb ഓൺ ചെയ്യുക trip ആയില്ലെങ്കിൽ MCB ഓരോന്നായി ഓൺ ചെയ്യുക ഏതു mcb ഓൺ ചെയ്യുമ്പോൾ ആണ് ആർസിസിബി ട്രിപ് ആവുന്നത് അത് ക്ലിയർ ചെയ്യുക എന്നിട്ട് ഓൺ ചെയ്യുക NE fault ആണെങ്കിൽ ഓരോ circuitile neutral remove ചെയ്ത് Fault ക്ലിയർ ചെയ്തതിന് ശേഷം On ചെയ്യുക
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
ഇടിമിന്നൽ വരുന്ന സൂചന ലഭിച്ചപ്പോൾ മെയിൻ ഐസൊലേറ്റർ ഓഫ് ചെഴ്ത് ഇൻവെർട്ടർ ലോഡിൽ ആക്കിയിരുന്നു. ഇടിമിന്നൽ അവസാനിച്ചതിനു ശേഷം രണ്ടു ഫാനുകൾ വർക്ക് ചെയ്യുന്നില്ല. എന്താണ് കാരണം
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
watch this video ua-cam.com/video/tnmR1qsw0IE/v-deo.html Ok... for full detailed answer many videos uploaded on this topics..... Stay subscribe with bell button pressed. If you liked the video, Like and share to family and friends..
Bro, is neutral earthed at the mains entrance, like in UK TNCS System, in Kerala? If yes, is there a chance for polarity reversal, as it will trip the transformer fuse?
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
Sorry what understood is neutral link is not a protective device that cut off... but it is just like TB to connect lines Stay subscribed with bell button pressed.. If you find our video interesting , please like and share this video to friends and family...
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
Actually, what is the purpose in domestic use only 30mA.... For a human anything above 30mA is dangerous... normally we use 100mA for industries only there will be slight leakage normally...
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
Normally fuse don't provide protection against phase to Earth fault . You need an ELCB/RCCB/MCCB with Earth fault detection to have phase to Earth fault protection.
I have seen in one Malaysian vlog they have used rccb for each phase of a 3phase. But in our Indian houses only one MCB is used.. main->isolator->rccb->rotaryunit->MCB Is this good design or per phase rccb is good ? Also, I have seen a vlog where it shows separate rccb for all MCBs getting input from inverter line. Is it needed ? (Also separate neutral requirement for inverter terminating in a neutral bar as per that vlog)
എം സി ബി ഓഫ് ചെയ്യണം െ െ എസുലേറ്റർ ഓൺ ആയിരിക്കണം ശേഷം റിസെറ്റു ചെയ്യുക എന്നിട്ട് ഓരോ എം സിബിയും ഓൺ ആക്കുക അപ്പോൾ ലിക്കേജ് ആയ സർക്ക്യൂട്ട് ഏതെന്നും മനസിലാക്കാം
Ok.... For full explanation...Stay subscribed with bell button pressed to all... If you find our video informative, like and share to friends and family...
RCCB trip ആയാൽ ആദ്യം iSolator ഉം MCB കളും off ചെയ്യുക എന്നിട്ട് ആദ്യം RCCB പിന്നെ isolator പിന്നെ ഓരോ MCB കൾ എന്ന ക്രമത്തിൽ ഓൺ ആക്കുക
Good.... .... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
E type I'll on chyukbol ulla benefits koodi explain chyyu
നിങ്ങളുടെ ഓരോ വീഡിയോയും ഒന്നിനൊന്നു മെച്ചമാണ് .കൂടുതൽ ഉയരങ്ങൾ കീഴടക്കാൻ കഴിയട്ടെയെന്നു ആത്മാർഥമായി പ്രാർത്ഥിക്കുന്നു.
Thanks for your wishes...
അതെ,സത്യം... നല്ല അവതരണ രീതി
To reset rccb- off isolator switch and mcb's, rccb on cheyuka
Then isolator on cheyuka... Rccb veendum trip ayillenkil one by one mcb on cheythu oro sub circuit check cheyuka.
Pls make a video about earthing. Different types, new tech to increase conductivity(earthing compounds), earthing pipe/rod selection(ie length) pit size, how to improve earthing after installing pipe etc...
Request a detailed video on polarity reversal , its effects.
RC CB ട്രിപ് ആയാൽ ആദ്യം ചെയ്യേണ്ടത് ഐസോലേറ്ററും, മുഴുവൻ എം സി ബി ക ളും ഓഫ് ചെയ്യുക, ശേഷം ആർ സി സി ബി ഓൺ ചെയ്ത് ടിപ് ആകുന്നില്ല എന്ന ഉറപ്പ് വരുത്തി ഐ സെലേറ്റർ ഓൺ ചെയുക, ഐസൊലേറ്റർ ഓൺ ചെയ്യുമ്പേൾ RCCB ട്രിപ്പായാൽ N. E, ചെക്ക് ചെയ്യുക, ട്രിപായില്ല എങ്കിൽ എം സി ബികൾ ഓരോന്നായി ഓണാക്കി ട്രിപ്പായ സർക്യൂട്ട് കണ്ടെത്തി ചരിഹരിക്കുക
അനസ് എ കെ
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
First if rccb trips .we must turn off all the MCBs and turn on one by one...
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
P
He
Rccb ട്രിപ് ആയാൽ isolator of ചെയ്ത ശേഷം rccb ഓൺ ചെയ്യുക. ശേഷം isolator ഓൺ ചെയ്യുക.
Isolator load il operate cheyyaruth.
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
Thank you for simple and nice explanation
MCB,RCCB,Isolater,off ചെയ്യുക,
പിന്നീട് lsolateron ചെയ്തശേഷം rccb ഓൺ ചെയ്യുക trip ആയില്ലെങ്കിൽ MCB ഓരോന്നായി ഓൺ ചെയ്യുക
ഏതു mcb ഓൺ ചെയ്യുമ്പോൾ ആണ് ആർസിസിബി ട്രിപ് ആവുന്നത് അത് ക്ലിയർ ചെയ്യുക എന്നിട്ട് ഓൺ ചെയ്യുക NE fault ആണെങ്കിൽ ഓരോ circuitile neutral remove ചെയ്ത് Fault ക്ലിയർ ചെയ്തതിന് ശേഷം On ചെയ്യുക
Main switch,and all MCB'sഉം ഓഫാക്കുക,ശേഷം main switch,Rccb ON ചെയ്യുക പിന്നെ ഓരോ MCBആയി on ചെയ്യുക....
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
Main switch is not in dB box.. so I think isolator in dB box provides the functionality
ELCB Trip ആയാൽ സർക്യൂട്ട് McCB of f ആക്കി (Switches) of fആക്കിയതിനു ശേഷം El CB ON ആക്കുക
SPD യെ പറ്റി ഒരു വീഡിയോ ചെയ്യുമോ സർ
Mcb of cheyyuka
Valare nalla episode thanks
ഇടിമിന്നൽ വരുന്ന സൂചന ലഭിച്ചപ്പോൾ മെയിൻ ഐസൊലേറ്റർ ഓഫ് ചെഴ്ത് ഇൻവെർട്ടർ ലോഡിൽ ആക്കിയിരുന്നു. ഇടിമിന്നൽ അവസാനിച്ചതിനു ശേഷം രണ്ടു ഫാനുകൾ വർക്ക് ചെയ്യുന്നില്ല. എന്താണ് കാരണം
Elcb trip ayal Direct elcb on akathe mcb ellam off aki elcb on akuka ennit oro mcb on cheyth check cheyyuka
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
Load mcb എല്ലാം ആദ്യം off ചെയ്തിട്ട്, RCCB reset ചെയ്യാൻ പാടുള്ളൂ..
Njan daily units consumption nokan try chedapol metee boxil 5 theram kwh und... Kwh 1 kwh 2angana angana... Engane aan calculate cheyuka
watch this video
ua-cam.com/video/tnmR1qsw0IE/v-deo.html
Ok... for full detailed answer many videos uploaded on this topics..... Stay subscribe with bell button pressed.
If you liked the video, Like and share to family and friends..
Good information...thank you
Thanks Seth thanks
1.5sqmmwire എത്ര ആമ്പിയർ വരെ കൊടുക്കാം
Very good
ഗുഡ്
Mcb full ചെയ്തു reset ചെയ്യുക.
What is neutral amps how to check single and three phase
Informative
Stay subscribed with bell button pressed..
If you find our video interesting , please like and share this video to friends and family...
Bro, is neutral earthed at the mains entrance, like in UK TNCS System, in Kerala? If yes, is there a chance for polarity reversal, as it will trip the transformer fuse?
Main swich off cheyththinu sheshm elcb on cheyyuka ..sheshm main onakkuka
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
Good information
Sir, cable, wire എന്നിവയുടെ IR ടെസ്റ്റ് വാല്യൂ chart കിട്ടുമോ
Search in manufacturer pdf document... google it...
Polarity എന്താണ്
Rccb off ayaal ath on akkuka
ചേട്ടാ വയറിങ് ചെയുമ്പോൾ ബൾബ് ഹോൾഡർ 3 wire വരുന്നത് ഏതൊക്കെ ആണ് . അറിയാതൊണ്ട ചോദിക്കുന്നെ 3 wire കണ്ടു ഹോള്ഡറിൽ
Nutral loop cheyyunnath
First off main switch then on elcb. .
Normaly Neutral link is used in neutral line is it cut off when a fault occur
Sorry what understood is neutral link is not a protective device that cut off... but it is just like TB to connect lines
Stay subscribed with bell button pressed..
If you find our video interesting , please like and share this video to friends and family...
Neutral link is not fuse .
Main switch off cheythittu on cheyyuka
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
കഴുങ്ങിനും, തെങ്ങിനും ഒരേ തളപ്പയാണല്ലെ?
Can I use 63A 30ma and 63A 100ma rccb in a same circuit
Actually, what is the purpose in domestic use only 30mA.... For a human anything above 30mA is dangerous... normally we use 100mA for industries only there will be slight leakage normally...
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
And change over. Since this is three phase
Super
Thanks Ok..
Stay subscribed with bell button pressed to all...
If you liked the video, like and share to friends and family...
Sir...How fuses provide protection from phase to earth fault?
Normally fuse don't provide protection against phase to Earth fault . You need an ELCB/RCCB/MCCB with Earth fault detection to have phase to Earth fault protection.
@@EngineeringEssentials ok..thank you
Use proper size of fuse wire for phase to earth fault
@@EngineeringEssentials fuse is providing protection against phase to earth fault but not accurate like elcb or rccb
@@akhilkanthks5478 thnk u👍
എല്ലാ സ്വിച്ചും off ചെയ്ത് rccb ഓൺ ആക്കുക ശേഷം ഓരോന്നു ആയി സവച്ച് ഓൺചെയ്യുക
ആർ സി സി ബി ട്രിപ്പ് ആയാൽ ഐസ് ലെറ്റർ എം സിബി ഓഫ് ചെയ്യുക, ട്രിപ്പ് ബട്ടൺ പ്രസ് ചെയ്യുക, ആർ സി സി ബി ഓൺ ചെയ്യുക
I have seen in one Malaysian vlog they have used rccb for each phase of a 3phase. But in our Indian houses only one MCB is used..
main->isolator->rccb->rotaryunit->MCB
Is this good design or per phase rccb is good ?
Also, I have seen a vlog where it shows separate rccb for all MCBs getting input from inverter line. Is it needed ? (Also separate neutral requirement for inverter terminating in a neutral bar as per that vlog)
No
എം സി ബി ഓഫ് ചെയ്യണം െ െ എസുലേറ്റർ ഓൺ ആയിരിക്കണം ശേഷം റിസെറ്റു ചെയ്യുക എന്നിട്ട് ഓരോ എം സിബിയും ഓൺ ആക്കുക അപ്പോൾ ലിക്കേജ് ആയ സർക്ക്യൂട്ട് ഏതെന്നും മനസിലാക്കാം
ആർ സി സി ബി ട്രിപ്പ് ആയാൽ എല്ലാ എം സി ബി യും ഓഫാക്കുക എന്നിട്ട് ആർ സി സി ബി ഓണാക്കുക എം സി ബി ഓരോന്നോരോന്നായി ഓണാക്കുക
I think this way
Ok.... For full explanation...Stay subscribed with bell button pressed to all...
If you find our video informative, like and share to friends and family...
അതു പോലെ വീട്ടിലെ എല്ലാ ഉപകരണങ്ങളും ഓഫ് ചെയ്യുന്നതും നല്ലതല്ലെ ? അതിനു ശേഷം ഒരാനായി ഓൺ ചെയ്ത് നോക്കുന്നതല്ലെ നല്ലത്?
@@oshapanoshapan4142 അങ്ങനെ എല്ലാം ഓഫ് ചെയ്തിട്ടാൽ കംപ്ലൈന്റ് ഉണ്ടെങ്കിൽ കണ്ടുപിടിക്കാൻ പാടാണ്
Hi.❤️❤️❤️ .v
Hi...Full support... thanks.. Like and share... ok
ആദ്യം Mc B ഓഫാക്കുക
പിന്നീട് RCC B ഓണാക്കുക
പിന്നീട് m c B ഓണാക്കുക
Informative one. Thank you
Sir,
I have some doubts regarding Electrical and electronic engineering.
Sir Please give your email id
Manasil cheetha vilikana varunne 🐒🐒🐒🐒
Send പ്ലീസ് വാട്സ്ആപ്പ് നമ്പർ
+918606472279
Very good.