Gasket goes on the on the top and the other one goes around the top outer rim. There’s a small one that goes in the middle and the thin larger one that goes around the top I usually put a little bit of oil to make a good seal just the dab oil with your finger.
@@colincarlson6465 no worries sorry that it not to clear. I copper washer goes on the bolton the out side. Don’t over tighten. The other is a spare in case you need to losen again. You should only use once. Hope this helps and thanks for watching.
![[UA] Team Vitality проти NAVI | IEM Cologne 2024](http://i.ytimg.com/vi/wttO1zVRTC0/mqdefault.jpg)
Iwish i can learn to be so Godinez with my hands
Where exactly do the two washers on the filter assembly go?
Gasket goes on the on the top and the other one goes around the top outer rim. There’s a small one that goes in the middle and the thin larger one that goes around the top I usually put a little bit of oil to make a good seal just the dab oil with your finger.
16:39 shows both
Sorry I don’t see where they actually go on the bolt in the video. I see them in the bag… Was hoping you could let me know where on the bolt they go.
The metal washers not the gasket.
@@colincarlson6465 no worries sorry that it not to clear. I copper washer goes on the bolton the out side. Don’t over tighten. The other is a spare in case you need to losen again. You should only use once. Hope this helps and thanks for watching.