How To Stamp Metal | Bead and Bones
Вставка
- Опубліковано 7 сер 2019
- My most frequently asked questions are always about stamping! How do I stamp metal? How do I make it straight? How do I get a clean impression? How do I do a whole bunch of them without my hands falling off? In this video, I answer all your burning questions about stamping jewelry plus give you an overview of my favorite tool for stamping... the arbor press! This specific model has been modified with a steel shaft that will accommodate most round and square stamps of varying sizes. It is from TheSupplyGuy on Etsy and is linked below. This little tool will save you countless hours, materials, and money. Oh... and did I mention? It's completely silent. So all you apartment smiths out there-- this is the answer for you! You're welcome!
TIMESTAMPS:
- 0:10 Introduction
- 0:22 1/2 Ton Arbor Press
- 0:35 Modification for Jewelry
- 1:00 Switching Out Block
- 1:30 Demo
- 1:57 Final Results
- 2:00 Details of the Arbor Press
- 2:22 Closeup of Final Results
TOOLS, SUPPLIES, & RESOURCES:
- 1/2 Ton Arbor Press: bit.ly/arborpress
- 2-1/2" Steel Block: amzn.to/31tFCeN
- 4" Steel Block: amzn.to/2yOQyat
- Custom Logo Stamp: stampyours.com/pages/custom-o...
You can find more How To videos by subscribing to the Bead and Bones Jewelry channel on UA-cam! As a self-taught silversmith, I struggled to find quality videos with actionable steps. I now share weekly tips, tricks, and tools to help you on your metalsmithing journey. I genuinely believe that sharing information in an authentic way is the pathway to success!
Check out my instructional videos here: bit.ly/silversmithingvideos
Follow Bead and Bones on social media!
INSTAGRAM: / beadandbones
FACEBOOK: / beadandbones
PINTEREST: / beadandbones
Shop for Bead and Bones jewelry: www.beadandbones.com - Навчання та стиль
I’ve had this tool for two years - and this is the first video that has shown me how to use it properly. I feel so dumb 💀🤣😂. Thank you so much for this video! I’m incredibly happy to have come across it!!
Awesome Arbor Press machine
Thank you for sharing that!
Would love to see a video on how you create that beautiful etching work on your pieces!! 🖤
It's a pretty involved process, but I get this request a lot! If I ever get more time free, I would love to offer a course. 👍
can a 1 ton arbour press stamp lettering onto 304/A2 steel?
I really need this I have issues hand bec have bone spout neck and my hands weak, this look so much easy for what I need where can I find stamp press I been look for I rather in USA, thank you I really need to order I real like stamps but can’t hold enough my hands tried thank you
Hi, Thanks for the video. have you used the SSU stamping machine? If so which one do you recommend ? Thanks
hi, for those of you that use a 1/2 ton arbor press...
what ga metal do you use with it?
i bought one and a few design stamps a month ago, and i tried using 24ga dead stof sterling silver, nothing transfered, so i went to 26ga, and i got a little impression and a better one after i used a hammer on the ram, which i dont want to do. i thought i would just have to pull the handle down and then my design would be on the metal? maybe im just really weak? i just ordered 28ga but am worried that might be too thin.
i can never get the full design when i hand stam, i've tried the tilt n tap but always mess it up. letter stamps,numbers and simple designs i have no problem free handing on metals up to 24ga.
is a 1 ton too much for metal stamping? not sure whether to get 1/2 or 1 ton arbor press
How did you do the leaf impression? Is that etching? Love it.
Yes, I use a combination of etching and stamping in my work. 💟
Hi. are you still doing videos ? I was going to subscribe but it's been awhile since you did a video. I see you live in Denver. I grew up Denver 52 yrs. then moved to Montrose Co. Thanks.
Hello there! I spent several years in Grand Junction so I know right where that's at! I do try to make videos whenever I can, however I do run a pretty successful jewelry business full time. Thanks for understanding!
I'm looking for a tool that could punch a hole in the top of a full can of soda without crushing the can. Do you think think Arbor press can do it?
That's definitely gonna crush a can. Best of luck! 🤞
Where do you get the actual stamping accessories from? I have looked online everywhere & can't find anywhere that sells them
You can find stamps from many online jewelry companies such as cooltools or firemountain, but there's also several companies that will make custom stamps for you! Try googling "stamps for metal jewelry". 💖
I’m from the UK, I’ve found a similar machine but can’t find the attachment you have for the metal stamps to fit into. Hope you don’t mind me asking what is the attachment name?
Thanks for your videos they are so helpful!!
Hi there! I'm not sure it has a specific name, but I do know the company that makes mine offers just that part-- I bet they can shop to the UK! 👍
Bead and Bones Jewelry Thank you!!!
@UCcL7QSN278uKL2S5OVI0f1g You can find all the links in the video description above! 💜
I bought this tool not long ago and cannot get it to make an impression no matter what I do.
What gauge metal are you stamping? I have a one-ton Arbor Press that works great on leather but I can hardly make a dent on even fairly thin metal with my press. I just got it so I am thinking I may need to return it for a hydraulic model instead.
I'm having the same issues! I can't get any full impression on any metal I try and my stamps are rated to stamp up to stainless steel. I am very disappointed with this machine.
@@daniellerhodes8933 yes! I have seen several people post here showing a very nice, deep stamp from an arbor press! It does not work like she is showing! She is only using a half ton! I had a ton Press and it didn’t work. I tried everything! It works great on leather but NOTHING on metal! I took my press back. I can’t believe that I need a hydraulic just to stamp 24 gauge copper!
I know these comments are 2 years old but did you anneal the metal before attempting to stamp it?
Just a thought.😊
Could you use this method for making enamel pins?
Hi there! In order to create a deep enough impression to hold enamel, I would suggest something heavier duty like a hydraulic press. Best of luck!
@@beadandbones thanks so much that's what I thought.
How to you stamp in a line
Do you think it would have enough force to stamp tools
No. For steel you will need a hydraulic press. 👍💕💕
Thanks