You are doing really Great...I started RC Hobby after seeing FT flite videos...thanks to the whole team. In India we do not have much RC hobby club who can teach these thinks...but just by seeing your videos any one can get in to the hobby.. keep going..🎉
Hello, Josh Bixler Sir ! Thanks for another great video. My son and I are still enjoying the FT-22's from years ago! Thanks again brother have a great day !👊😎
Hey Josh if you are paying attention. It would be nice to make plans available again just like in the good old days. What better way to 'Make Memories' as you always allude to.
I just exploded my Might Mini Tiny Tutor on the maiden. The build was cursed from the get go. over bevelled the wings and had to replace them with DT foam which was heavier and thinner. Not sure if that threw off the CG according to the plans. Came in at 260g instead after the swap. Pilot error took care of the rest. Good learning Experience. I've got a new kit in the mail and look forward to mending my broken heart hahaha. PRACTICE THOSE CUTS ON SOME BURNER FOAM BEFORE YOU TOUCH THE KIT.
Thanks to your videos i got inspiration and motivation to try out this hobby. Since the shipping is not supported to Bangladesh i had to bring it from America to Dubai to Bangladesh. I already checked my transmitters and also got the turbo wing. Thanks alot!❤
I'd love to build this for my daughters, but the shipping to Australia is more than twice the price of the kit! The plans don't seem to be on the FTCA store yet either. Any ETA for those?
Hello Flite Test Friends, Congratulations on another amazing project. Please share the plans for building this wonderful plane. We here below the equator, (Tupiniquin people), were unable to buy the construction kit.
@@FliteTestTech in your FTCA website is listed a plan FT Tutor (1055mm), is it the same as this FT Mighty Mini Tiny Tutor in this video? Is this the same sub-250 gram plane mentioned by Josh in the video?
I do alot of soft woodwork, I have a Desk dolly as i call it which would help you no end doing fiddly stuff like this. The dolly.... A 7"x 3/4"x4" soft wood with a 7"x 1/2"x1" off to the side giving a 90* to push against. It also has removable dowls so you can peg it down so it dont run away when you put side load on it. Its great for clamping when glueing up.
I really wish you showed the binding process with the R84 radio master receiver. Still trying to get it bound and it is the most frustrating thing I have experienced in a while./
There is a mother (first time builder) on the FT Forum stating she cannot see which way to install the servos by watching the build video. It would have been very helpful to provide a view of them after installation.
What's the wing span??? It doesn't seem to be in the model's description on the FT site & I can't find any vid in their channels that mention it? Am I missing something here? If I'm over looking something by being an air head, I'll own it, but can someone advise please? Thanks & y'all be well & stay safe! God bless.
Yeah, why should Flight Test make any return on hundreds of hours of R&D, ingenuity, inventiveness and hard work? Who do they think they are being in business anyway, the cretans?! Crimminy, that’s all I can say!
I like it. I've got a few open acres in front of my house; this FT Mighty Mini Tutor would be perfect for the space. Ps. I've already got the swapable Tutor which I fly at the club field.
I was just at the edgewater shop this past Friday and picked up what I thought was the tiny tutor kit but it turned out I bought a wing kit for the tutor mk2. RIP me I guess.
You are doing really Great...I started RC Hobby after seeing FT flite videos...thanks to the whole team. In India we do not have much RC hobby club who can teach these thinks...but just by seeing your videos any one can get in to the hobby.. keep going..🎉
Hello, Josh Bixler Sir !
Thanks for another great video. My son and I are still enjoying the FT-22's from years ago! Thanks again brother have a great day !👊😎
Hey Josh if you are paying attention. It would be nice to make plans available again just like in the good old days. What better way to 'Make Memories' as you always allude to.
I just exploded my Might Mini Tiny Tutor on the maiden. The build was cursed from the get go. over bevelled the wings and had to replace them with DT foam which was heavier and thinner. Not sure if that threw off the CG according to the plans. Came in at 260g instead after the swap. Pilot error took care of the rest. Good learning Experience.
I've got a new kit in the mail and look forward to mending my broken heart hahaha.
PRACTICE THOSE CUTS ON SOME BURNER FOAM BEFORE YOU TOUCH THE KIT.
Thank you for all you do to keep our hobby alive, Josh Bixler ❤
Thanks to your videos i got inspiration and motivation to try out this hobby. Since the shipping is not supported to Bangladesh i had to bring it from America to Dubai to Bangladesh. I already checked my transmitters and also got the turbo wing. Thanks alot!❤
I'd love to build this for my daughters, but the shipping to Australia is more than twice the price of the kit! The plans don't seem to be on the FTCA store yet either. Any ETA for those?
Hello Flite Test Friends,
Congratulations on another amazing project.
Please share the plans for building this wonderful plane.
We here below the equator, (Tupiniquin people), were unable to buy the construction kit.
Hey, is the plan available for the public to download? looking to scratch build this one...
I still haven't given up hope that someday they will make the for Ft Tutor plans publicly available...
Please check out the FTCA plans list? You can get it there :-)
FT Tutor mini not yet available
Pls make it available
@@FliteTestTech in your FTCA website is listed a plan FT Tutor (1055mm), is it the same as this FT Mighty Mini Tiny Tutor in this video? Is this the same sub-250 gram plane mentioned by Josh in the video?
Eu também não encontrei :(
I do alot of soft woodwork, I have a Desk dolly as i call it which would help you no end doing fiddly stuff like this. The dolly.... A 7"x 3/4"x4" soft wood with a 7"x 1/2"x1" off to the side giving a 90* to push against. It also has removable dowls so you can peg it down so it dont run away when you put side load on it. Its great for clamping when glueing up.
You did an awesome job explaining. Can I install a 2200mah battery on this model ?
Thanks Josh, I will be adding it to the build list for sure.
I have been waiting for this
Does the motor come included?
No I wish it did
It would really help if there were close up shots of the parts so that it would be way easier to see all the small things that you missed
It would be nice if Josh didn't cover up 90 percent of the bends and the servos so you get a look at what is happening.
I really wish you showed the binding process with the R84 radio master receiver. Still trying to get it bound and it is the most frustrating thing I have experienced in a while./
59m
Counterclockwise rotation when viewed from what perspective?
Are there free plans online for this plane?
Dear flight test, we really love the ft tiny tutor, please provide the plans for this one... 😢
There is a mother (first time builder) on the FT Forum stating she cannot see which way to install the servos by watching the build video. It would have been very helpful to provide a view of them after installation.
are there plans available?
The best plane for beginers !!!!
Não tem a planta em PDF? Gostaria de comprar
What's the wing span??? It doesn't seem to be in the model's description on the FT site & I can't find any vid in their channels that mention it? Am I missing something here? If I'm over looking something by being an air head, I'll own it, but can someone advise please? Thanks & y'all be well & stay safe! God bless.
it is 27''
Thanks for this, but Free plans please 😢😢
Yeah, why should Flight Test make any return on hundreds of hours of R&D, ingenuity, inventiveness and hard work? Who do they think they are being in business anyway, the cretans?! Crimminy, that’s all I can say!
Gotta order one👍🏼👍🏼
where can i get free plans?
are the wheels in the kit
Yes
I like it. I've got a few open acres in front of my house; this FT Mighty Mini Tutor would be perfect for the space.
Ps. I've already got the swapable Tutor which I fly at the club field.
free plans for this one please!!!
Thanks for this, but Free plans please 😁😁😁
Sadly still very hard to get your kits in the EU
Josh is the Bob Ross of airplane building.
I think free plan😢
Nothing is free these days.
Can you upload free plan please
important point is Wing! and there is no info about building wing in your video
Pls do free plane ftcs web j need this plane
I was just at the edgewater shop this past Friday and picked up what I thought was the tiny tutor kit but it turned out I bought a wing kit for the tutor mk2. RIP me I guess.
What I don't like is that the plans are not published for this plane.
Where are the free plans?