Intense build with a great result. Seemed like you had to add lots of supplies/materials that the kit didn't provide. For a high end kit that was a let down. Same goes for the instructions' inconsistencies. Superb perseverance. Bill
I enjoy watching your videos, because to me you are a real old school modeller - in it' s best sense. The way you surpass problems with scratchbuilds, reminds me of those glory days of "Military Modelling" issues, where they gave you information and advice to all aspects of the hobby. Your videos are a little bit like that. The smell of Humbrol-enamels comes to my mind... one last pledge though - the Arado is a must now, thank you mate. Cheers Fedja
It is fascinating watching your processes. It's the main reason I watch all your videos. I'm 75 and the steady hands and fine motor control are sadly eroded now. I still do a bit of model building but not at your level. I truly admire your skill and your skillful commentary.
Crikey, Greg! You are a better man than I. I wouldn't have the patience for something like this. You did a stellar job on it... you should be well pleased.
You need a medal for your perseverance, Greg. The model itself is more complex (build wise) than the1/32 scale aircraft it's intended for. Terrific job all round and a beautiful final reveal.
This why I watch artists build models….after about 5 minutes of fiddling around with pieces that don’t fit properly, I would have been frustrated enough to just throw the thing away! Brilliant job, and thanks for sharing.
Nice build. have done the same kit, and I must say I didn't find anywhere near the issues you had. I will agree about the hand rails though. Mine has the Revell 1/32 Arado AR 196 float plane on it, and it looks great (I wish I could post a photo on here). I would note that HPH recommends weighting the base, and if you plan to put the aircraft on it, it is needed. HPH has a great range of unusual subjects, and I would encourage people to browse their catalog. Being multi media resin kits, they are not for beginners though, and they are not cheap either. My next build is their 1/32 Catalina cutaway kit, it's on my shelf waiting for me......
Greg, that tested your patience from start to finish! I enjoy listening to your thoughts about how to bring the best out of the kits you do and I am amazed by the confidence you have in mixing your own colours and that's where I struggle to keep up with you. Cheers
Very impressive build. Not something I would have thought doing for a second, but makes up into a super model (with a great deal of effort on your part.) I agree with below... it does need a plane on it to give it a context
Hi Greg. I watch a lot of modelling videos (including yours) and I have to say that the result of this build is absolutely superb, particularly considering the challenges you faced and overcame with this kit.
Your perseverance is amazing watching you struggle with this made me think it was destined for a trip through your first floor window. We'll done I'm really looking forward to seeing the next video. I hope that goes better for you. Take care and stay safe mate and best wishes from NZ.😉
Omg your so patient, all that work. But what an amazing looking kit. I'm new to you and am gonna stay. Loved the German 50's Tractor one. Will defo be watching more 👊👌
Hi Greg great build certainly not seen this before skill &taking time to say the least but what a result your eye for scratch builds is 2nd to none very interesting subject thankyou for shareing glass raised Jon stay safe
I scratch built one in 1/48 scale for my Arado. I didn't realise they were available as kits but I see that HPH do a 1/48 scale one also. However, at the price I think I would still have scratch built it for the cost of a little plasticard and wire. Still another good and interesting video
Wow ! Thanks, You made what I thought would be boreing subject matter & made it INTERESTING . the only thing left to do now is build the float plane 🐒 ⭐⭐⭐⭐👍👍
Beautiful job👍 Your scratch building really is superb and an excellent tutorial as well. Andy from PM models has just finished the Arado for this. Maybe he could lend you it for some shots😀
Wow, very nice, you have a lot of patience, I would of binned the kit about 5 mins into the build, now you need the aircraft to go on top...👌😁, maybe a future build?
Just wondering what your thoughts are on the kit now you've finished it? While it's not insane money, it's not a cheap kit, so the extent of scratch building and making good required was surprising. Will you add the Arado to it or are you happy with it as is?
I'm personally happy with the end results, wouldn't want to build the kit again though. If HpH models brought out a catapult for an American or the Japanese floatplane I'd buy/build them because of the subject, interesting and different, even if they were to have similar issues. As for the Arado; maybe one day but not for the foreseeable future.
excellent as always, I like your professionalism but above all what fascinates me is your unique way of speaking. May I ask what work do you do in life? Or what you did.
Hiya Greg, Great videos. Really well put together and delivered!! 👌 Have you built any other or know if they are worth it, HPH kits? I know they aren't your standard kits but do you reckon they ate worth the money? Interested in the C47 and the Catalina in 1/32 but an awful lot of £££££ what's your opinion please?? Regards and keep doing what you do 🙌
Thank you; It can be all about the detail and subject, especially in a great scale, HPH supply that. Yes the price tags are eye watering but that comes with beautifully detailed multimedia kits. I've always fancied the 1/32 Fw 189 and Me 410 myself, maybe someday.
@@GregsModels well that's kind of you to reply so swiftly. They look like interesting builds (quickly googled them). I'm not a rich guy but really like the kits I mentioned before and love the scale. You got me interested in the 1/24 airfix kits and I've managed to grab a few that aren't readily available any more so I'll keep on watching what you do to inspire me. I'm returning to the hobby after 30 years break and things certainly have changed. I grew up loving Francoise Verlinden dioramas and yourself and others re lit the modelling fuse so thanks again. You make it look so easy ffs 😂. 👏
Your skill and patience definitely completed one of the most problematic kits I have ever seen. I have not built a resin kit before and by the looks of the difficulty, doubt I'll ever try one, It is way above my skill set. The manufacturer should pay the modeler instead of the modeler buying the kit. The finished product, to me, was museum quality finish.
Thank you; it's all about breaking the kit down into small models. If I'd have looked at it as a whole it wouldn't have been put back on the shelf to sit there for more countless years 👍
I’m never going to build this kit but what a joy to watch. Thanks for your continued inspiration Greg
Intense build with a great result. Seemed like you had to add lots of supplies/materials that the kit didn't provide. For a high end kit that was a let down. Same goes for the instructions' inconsistencies. Superb perseverance.
Bill
It's the price you pay when it's the only game in town. Still doesn't make it right 👍
Proof that skills can be applied to any subject matter. Excellent course in problem-solving and scratch building! Thank you. 👌
Thank you 👍
I wasn’t expecting a ship catapult to be an interesting kit but it’s come up a treat. Very nice. And yes it needs an Arado float plane on top.
I enjoy watching your videos, because to me you are a real old school modeller - in it' s best sense. The way you surpass problems with scratchbuilds, reminds me of those glory days of "Military Modelling" issues, where they gave you information and advice to all aspects of the hobby. Your videos are a little bit like that. The smell of Humbrol-enamels comes to my mind... one last pledge though - the Arado is a must now, thank you mate.
Cheers Fedja
Thank you Fedja
It is fascinating watching your processes. It's the main reason I watch all your videos. I'm 75 and the steady hands and fine motor control are sadly eroded now. I still do a bit of model building but not at your level. I truly admire your skill and your skillful commentary.
Wow, thank you
An excellent presentation. No fancy music, just a clear explanation of whats happening!! Fantastic.
Crikey, Greg! You are a better man than I. I wouldn't have the patience for something like this. You did a stellar job on it... you should be well pleased.
Cheers
You need a medal for your perseverance, Greg. The model itself is more complex (build wise) than the1/32 scale aircraft it's intended for. Terrific job all round and a beautiful final reveal.
Cheers
Why dos the phrase "Silk Purse from a sows ears " spring to mind for this build, excellent work as always
Agree.
This why I watch artists build models….after about 5 minutes of fiddling around with pieces that don’t fit properly, I would have been frustrated enough to just throw the thing away! Brilliant job, and thanks for sharing.
Cheers Tom
Nice build. have done the same kit, and I must say I didn't find anywhere near the issues you had. I will agree about the hand rails though. Mine has the Revell 1/32 Arado AR 196 float plane on it, and it looks great (I wish I could post a photo on here). I would note that HPH recommends weighting the base, and if you plan to put the aircraft on it, it is needed. HPH has a great range of unusual subjects, and I would encourage people to browse their catalog. Being multi media resin kits, they are not for beginners though, and they are not cheap either. My next build is their 1/32 Catalina cutaway kit, it's on my shelf waiting for me......
Yes I saw the Catalina at the Telford show some years ago, internal detail looked second to none.
@@GregsModels It's on my shelf goading me to build it:) I have to finish a 1/32 Tamiya F-14 commission build first though:(
Well I must say I thought a catapult video would be very boring but no I thoroughly enjoyed it. Your going to need a float plane video now.
Very good.
It would look fantastic with the Arado sitting on it
Amazing work my friend. I enjoyed watching
Greg, that tested your patience from start to finish! I enjoy listening to your thoughts about how to bring the best out of the kits you do and I am amazed by the confidence you have in mixing your own colours and that's where I struggle to keep up with you.
Cheers
Cool build, I don't think I'd want to be the person operating that given the close proximity to an aircraft sitting there at full throttle. 😉
Very impressive build. Not something I would have thought doing for a second, but makes up into a super model (with a great deal of effort on your part.)
I agree with below... it does need a plane on it to give it a context
Someone's been having some fun!
What a great build - fine finish on it as well. Great video thanks for sharing.
Fantastic job! And that’s what you call ‘modelling’. Great subject too. 👍🏼
Greg: that's a whole video in itself. Nobody wants that.
Oh yes we do, Greg. Yes, we do.
Yet another great video Greg , simple great modelling ...... fantastic
GREAT JOB! Your considerable building skills are exceeded only by your exceptional patience!
Hi Greg. I watch a lot of modelling videos (including yours) and I have to say that the result of this build is absolutely superb, particularly considering the challenges you faced and overcame with this kit.
Finally! Now if they would do a 1/48 scale too. I got to find one of these.
Great job, thank you for sharing.
Wonderful build video, Greg. Fantastic result!
Your perseverance is amazing watching you struggle with this made me think it was destined for a trip through your first floor window. We'll done I'm really looking forward to seeing the next video. I hope that goes better for you. Take care and stay safe mate and best wishes from NZ.😉
cheers 👍
Once again thank you for sharing your amazing talent with us. Your patience and eye for detail is second to none... bravo sir.. amazing job. Take care
Thank you very much!
Enjoyed the video very much.
Omg your so patient, all that work. But what an amazing looking kit. I'm new to you and am gonna stay. Loved the German 50's Tractor one. Will defo be watching more 👊👌
Thank you
Outstanding.
Hi Greg great build certainly not seen this before skill &taking time to say the least but what a result your eye for scratch builds is 2nd to none very interesting subject thankyou for shareing glass raised Jon stay safe
Thanks 👍
Genius,can't wait to see the Arado if you get hold of one
Interesting subject well told with a nice outcome. Stu
Neat project! 👍
Looks really good but better you than me all your missing is the aircraft. Good job Steve U.K.
Brilliant!
Great build again gregg.
Wow. Great work on this very hardcore kit. However, you have a very interesting piece for your collection. Greetings Aleš 😎👍
Awesome video....I have this in my stash along with the Arado. This will be my goto reference for that project.
Thankfully both HpH and Revell's 1/32 Arados are good kits, the detail in the HpH one is amazing, if still available.
Very impressive.
6:36 the infamous Airfix Mac mini.
Well done
I scratch built one in 1/48 scale for my Arado. I didn't realise they were available as kits but I see that HPH do a 1/48 scale one also. However, at the price I think I would still have scratch built it for the cost of a little plasticard and wire. Still another good and interesting video
I didn't know HpH made a 1/48 catapult. Would be interesting to see what comes in the box.
@@GregsModels I would start with the assumption that the kit is exactly the same as the 1/32 kit you built. You've just got to do the Arado now.
Nice work!
Brilliant
Bella l'immagine delle mani di Ryuk!
Wow ! Thanks, You made what I thought would be boreing subject matter & made it INTERESTING . the only thing left to do now is build the float plane 🐒 ⭐⭐⭐⭐👍👍
Casually solving modelling problems iike McGyver escaping from a Federal Prison with a paperclip and half a grapefruit. Cracking job Greg.
If only my life was that exciting 😂😂
This in 1/72 to go with the Takom turret kit would make an interesting display.
Beautiful job👍 Your scratch building really is superb and an excellent tutorial as well.
Andy from PM models has just finished the Arado for this. Maybe he could lend you it for some shots😀
Sounds like a plan to me 👍
Wow, very nice, you have a lot of patience, I would of binned the kit about 5 mins into the build, now you need the aircraft to go on top...👌😁, maybe a future build?
Just wondering what your thoughts are on the kit now you've finished it? While it's not insane money, it's not a cheap kit, so the extent of scratch building and making good required was surprising. Will you add the Arado to it or are you happy with it as is?
I'm personally happy with the end results, wouldn't want to build the kit again though. If HpH models brought out a catapult for an American or the Japanese floatplane I'd buy/build them because of the subject, interesting and different, even if they were to have similar issues. As for the Arado; maybe one day but not for the foreseeable future.
👍
Greg, you got hairy hands? What you been up to? 😳
Another above and beyond build. Lovely stuff 😉
Nice job Greg, you know you have to do an Arado now, right 😂
I wouldn't mind but I had the kit sat around for years and for whatever reason sold it on 😁
fascinating subject outside the box thinking. it certainly isn't a kit for a beginner.
Wow, if you can find a 1 / 32
Avocado.. that would be insane.
Avocado.... ( Sigh,).
excellent as always, I like your professionalism but above all what fascinates me is your unique way of speaking. May I ask what work do you do in life? Or what you did.
Spent a good part of my life working for the aerospace industry.
Greg, what do you do with all of your finished kits?
Some of them are huge!
All put in custom made boxes, and there piling up, safe from the light and that dreaded dust. At some point I'll have to off load some of them.
Hiya Greg,
Great videos. Really well put together and delivered!! 👌 Have you built any other or know if they are worth it, HPH kits? I know they aren't your standard kits but do you reckon they ate worth the money? Interested in the C47 and the Catalina in 1/32 but an awful lot of £££££ what's your opinion please?? Regards and keep doing what you do 🙌
Thank you; It can be all about the detail and subject, especially in a great scale, HPH supply that. Yes the price tags are eye watering but that comes with beautifully detailed multimedia kits. I've always fancied the 1/32 Fw 189 and Me 410 myself, maybe someday.
@@GregsModels well that's kind of you to reply so swiftly. They look like interesting builds (quickly googled them). I'm not a rich guy but really like the kits I mentioned before and love the scale. You got me interested in the 1/24 airfix kits and I've managed to grab a few that aren't readily available any more so I'll keep on watching what you do to inspire me. I'm returning to the hobby after 30 years break and things certainly have changed. I grew up loving Francoise Verlinden dioramas and yourself and others re lit the modelling fuse so thanks again. You make it look so easy ffs 😂. 👏
very nice! i assume a 1/32 Arado next?
Something completely different next
Go on Greg get the Arado please it would really complement this difficult build , look after yourself marra . Regards Gav.
I saw your reveal of the Yokosuka floatplane vid last week, great minds think alike. Be good 👍
Absolutely cracking end result but my God life's too short for me to bother with kits like that.
I do know where you're coming from, I try not to think about it.
Nice build mate...would you be tempted to fit an aircraft to the catapult? .
At some point down the line, yes.
Not a very appealing model for me, yet very pleasant to see you building it.!
Cheers !
Many thanks!
You should do the hph 1/48th scale b 36
I've lost the will to live just thinking about it 😂
Excellent build, but, bit pointless without an aircraft on it!!
There something you don't see on a UA-cam video
And now scratch-build the rest of the ship! :D
😂
Your skill and patience definitely completed one of the most problematic kits I have ever seen. I have not built a resin kit before and by the looks of the difficulty, doubt I'll ever try one, It is way above my skill set. The manufacturer should pay the modeler instead of the modeler buying the kit. The finished product, to me, was museum quality finish.
Thank you; it's all about breaking the kit down into small models. If I'd have looked at it as a whole it wouldn't have been put back on the shelf to sit there for more countless years 👍
I would have tossed the lot in the bin right off! I sure wouldn't have paid money for a kit that janky!