This was so simple. Some people make this seem so tedious. All you are doing is: 1 - unscrew some of the casing to get to the tube on the side of the printer. 2: - Pull the tube out and disconnect it 3 -
Hi thanks for you video your content was so helpful. Just wanna ask a question how often you do a maintenance of epson xp-15000 if it is converted to dtf printer, and do you replace the cartridge pr just refill the ink? Thanks in advance for your response. God bless you.
Can you please talk about why the printer starts printing half way down the page and the whole sensor tape issue? how come no one talks about this in you tube????
Wanting to learn is never dumb 💯, the pinwheels leave scratch marks on the designs. watch this video it explains the reason more in depth. ua-cam.com/video/58uiuYDz86A/v-deo.html
@@matthewgrider33 I broke a connector piece off one of the Ink tank reservoirs, I don't recommend the CISS for this printer. The original tanks are much better for ink preserving ink consumption
Im using oem cartridges. If you use want to use the refillable cartridges, look for a ciss with dampers as well. The cartridges do not need chips, if you have installed the chipless firmware.
@@HangryMuscle I understand. I see that you started the printer without the cartridges connected. Do you not get air inside the head? Because my understanding is that it starts pushing ink to which starts the printer.
This was so simple. Some people make this seem so tedious. All you are doing is:
1 - unscrew some of the casing to get to the tube on the side of the printer.
2: - Pull the tube out and disconnect it
3 -
After that what’s the 2nd step, before starting the chipless software. Do I put the cartridge inks it came with before installing the dtf ones?
Hi thanks for you video your content was so helpful. Just wanna ask a question how often you do a maintenance of epson xp-15000 if it is converted to dtf printer, and do you replace the cartridge pr just refill the ink? Thanks in advance for your response. God bless you.
This is the same process for conversion to sublimation as well?
How about we use the ultrasonic cleaner for this printhead? Any recommendations?
Hi, was wondering if this is the epson expression photo xp 15000? If it is I have it in my cart but I don’t want to buy it if it’s the wrong one.
Yes you have the correct one "XP-15000"
@@HangryMuscle thank you 😊
What happens if you don’t set up an external waste management?
It’s bin a yr. Since you posted this video. So how is this machine holding up.any clogs or did it last more than 6 months
Can you please talk about why the printer starts printing half way down the page and the whole sensor tape issue? how come no one talks about this in you tube????
I would do better research, i have multiple solutions on the channel
Do I do this stuff if I added chipless firmware?
How is it working for you now?
I haven't used the Xp-15000 in about 2 months. I've been using the Et-8550, its a much better printer than the Xp-15000.
Dumb question, why do we remove the rollers?
Wanting to learn is never dumb 💯, the pinwheels leave scratch marks on the designs. watch this video it explains the reason more in depth.
ua-cam.com/video/58uiuYDz86A/v-deo.html
Mine is not loose so what do you do then
Need ink installation paper suggestions
which printer do you prefer the et-8550 or the epson 15000
ET-8550 for sure. I had so many issues just getting the Xp-15000 setup and running
@@HangryMuscle thanks why did you add the ciss tank on the 8550
@@matthewgrider33 I broke a connector piece off one of the Ink tank reservoirs, I don't recommend the CISS for this printer. The original tanks are much better for ink preserving ink consumption
I have a paper jam error on start up
Can you use A3 plus on this one???
What refillable ink cartridges do you need for the printer? I looked on Amazon and they have chipless ones. Are they good to use?
Im using oem cartridges. If you use want to use the refillable cartridges, look for a ciss with dampers as well.
The cartridges do not need chips, if you have installed the chipless firmware.
@@HangryMuscle where do I get the ones you use?
Oem cartridges come with the printer.
@@HangryMuscle okay so I just clean out that ink and put dtf ink in?
ua-cam.com/video/8J1qPdZAsg8/v-deo.html
Thanks man man😁
You bet! 💪
Which xp is this the expression or other
the the expression xp-15000
Do I need to purcahse a software for this to print? Like acrorip?
isn't acrorip free?
@HelmetVanga no not if its a legitimate version
where i can download acrorip?
Here you go dtgpro.com/cicproduct/dtg-pro-acrorip10.php?afl=3277
Can I convert a used printer to dtf?
Yes you can. Clear the old ink first
What do you need to covert it?
ua-cam.com/video/y_49xu3cuoc/v-deo.html
So by adding this does that mean I don’t have to buy maintenance boxes anymore?
No you still need to buy or reset the Maintenance box
You have not had a problem with this CIS system, I understand that it filters and ends up burning the printer
Not if the ciss has dampers, without them there's a possibility because the refillable cartridges tend to leak when running excess printer cleans.
@@HangryMuscle I understand. I see that you started the printer without the cartridges connected. Do you not get air inside the head? Because my understanding is that it starts pushing ink to which starts the printer.
Cool channel amazing content just subscribe
Appreciate you, thank you 🙏😁
Can you use Acrorip 9.0.3 on this? X
No but you can download the ekprint demo
@@HangryMuscle Will I still need to purchase the ekprint or I can continue using the ekprint demo?
Where da rest ?
Still working on it, i have to record it again so you guys can see my computer screen more clearly. What do you need help with?
@@HangryMuscle Awesome! Need help with the whole thing lol. Would like to see a whole processs from start to finish including maintenance and all that
🤙🤙🤙🤙
can print A3 size.?
Up to a3+ . 13inches
@@HangryMuscle how many pins has the ship resetter for the maintenance box? Or the model
@@rubenagurcia906 7 pins. Model number T3661
hey ty! I can't get my printer to print my Cyan? any ideas..
You probably have a clog, you can put hot cleaning solution on a folded paper towel and let the printhead sit over it for like 20 mins.
I'm sorry what kind of cleaning solution?
Any, i use windex
Dead xp15000???
Yeah, the Xp-15000s are down.
I don't recommend the Xp-15000 its hassle to maintain and use compared to the Et-8550
whats the hassle to maintain on the xp15000 compared to the et8550? @@HangryMuscle
Hello I emailed ur business email Can you please respond to it its about the printer
Now what??
I'll be uploading the second part soon.
Was there ever a part two? I don't know what to do with the rollers now lol
Exactly I’m not taking mine apart because WHAT??