You have been a God send. Thank you so much for sharing this information! I was to the point of either breaking down crying or throwing all of this out the window last night. I worked on trying to convert this for hours! And this morning I found your video and did everything step by step as you stated and it WORKED! THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I just want to say thank you for clarity I watched so many videos and yours was the only one that informed me correctly how to set chipless firmware up
Thank you so much for this video. Ive been trying to get this done for about 6 hours now. Did a step by step on your video and it worked on the first try. Life saver!!
Thank you SO MUCH for your videos! I’m trying to install chip ink and I’ve got a message on my printer screen that a firmware update is available. I assume I ignore that?
Hey again , thanks for responding it was some setting blocking me got that squared now I’m all done thank you so much really appreciate you man , now not to bother you again lol but you mentioned initiation process ? Where can I find that video ?
OMG!!!! I'm late to the dtf game, but OMG!!! You helped me SO much!!! I paused at each step till it was done and viola! I have ink chip installed. So many thanks!! Other videos just didn't cut it for me. Your video was a true blessing!!!!!🥲
Hello, so I am new to the DTF world, but I have what may be a stupid question, but I just watched your video on you using the OEM cartridges taking out the manuf ink and replacing it with DTF ink, so if your using the OEM cartridges why do we need to get chipless software? Cause we're just replacing the ink, I'm sorry if its stupid, I'm asking because I am in the process of trying to buy alllll the supplies I need to get up and running, thank you in advance.
If u dnt have chipless firmware you will have to replace your ink cartridges everytime otherwise with the chipless u can use same ones over and over again
Thanks for the video very much helpful. So I converted my xp 15000 to dtf with C.I.S ... and chipless But I was able to print the white all four other colors print when my nozzle check but not the white.. Can it be the wrong type of white.. Or any suggestions?
Buenas tardes Javier, de casualidad no tendrán un video en español explicando paso a paso (para principiante) de como convertir a DTF la impresora XP15000, muchas gracias
Hi thanks for you video your content was so helpful. Just wanna ask a question how often you do a maintenance of epson xp-15000 if it is converted to dtf printer, and do you replace the cartridge pr just refill the ink? Thanks in advance for your response. God bless you.
How did you get the printer software to install without initializing the set up the printer. And do you put original OEM carts in the printer to be able to install printer software. I was told to never use the original ink. I'm stuck.
I have a converted printer Epson xp15 000, but the white ink is not coming out. I put white ink in the red and gray catridge. Do I need to set it somewhere in the software? What is the problem here? Thanks a lot for helping me out x
Glad I could help! If you ever run into trouble, I have DTF coaching available. I can help you solve any issues you might be having. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Uhggg so frustrating !!! Once i finish the firm update my printer doesn’t come up when I start the activation process . It’s just blank . What do i do ??
I downloaded the chipless firmware. After it was finished, I put my new ink cartridges in with my dtf ink and the printer is telling me to "insert ink cartridges" like they aren't there. Need help?
Hey! I got a quick question. I bought new XP-15000 and installed the chipless firmware . However, my machine only prints blank page for some reason. I can't even run test print. Do you know the reason? I don't have CISS byw.
So I already have chipless firmware on my xp15000. Want to install printer to my laptop. With the cd that came with the printer. But I don’t want to mess up my chipless firmware any tips would be helpful?
Great video, thanks! Maybe a silly question but does the firmware get updated in the printer? Just asking as I'm have a bit of trouble with my printer driver and I may want to delete that and reinstall
Do I still need rip software after converting my cartage to Chipless cartage. I’m seeing a lot people converting their xp-15000 and downloading the chipless software and converting the original cartage to chipless and they don’t bring up the rip software. I already converted my ep-15000 just want to know is the chipless software good enough to start printing. Appreciate you if you can help
hey! i have been having issue after issue with trying to install the firmware. finally got it to install, bought my activation code and now every time i click activate online it says "read failed - 1" do you know why this could be?
Als ich es zum zweiten Mal aktiviert habe, nach der Reinigung, ging der Drucker aus und funktionierte nicht mehr, also habe ich den Strom abgezogen und eine Viertelstunde gewartet und neu gestartet, aber sobald ich versucht habe, mit dem Passwort das zu aktivieren Ich kaufte, der Drucker funktionierte nicht mehr
Nevermind I did a print on film and there is white just like one or two lines don't understand it's brand new out of the box how can it be already bad :-)
well update i did several head cleans only for the machine to tell me now "Print Head Adjusemnt Cancelled" There is a problem with the Print head" Wow it's brand new out of the box took me days to finally get it up. Do you know are the activation keys for firmware a one time use if I buy another printer
Hi, I’m watching your video and trying to activate mine but the Activation tool isn’t showing anything in the drop down box and I’ve refreshed and still nothing, what do you think could be wrong ?
I'm having the same issue. Activation tool isn't showing anything in the drop down box. I've refreshed several times...still nothing. I didn't see a response as to what to do, so I'm here asking for help! It's been 4 hours of me repeating all the steps in the video and I still can't get my printer to show in the activation tool.
Ummm I know this video is kinda of old but I followed all steps , after clicking my printer , then clicking activate online Read Failed -1 keeps popping up can you help please??????
I know Epson can get gnarly with their firmware updates, does this method of rendering the 15000 chipless still work currently today?? I'm about to invest into a few of them to convert and refill OEM carts for my print shop.... just want to make sure it still works in todays times before I invest so much into it...
@Ida I was literally about to try setting mine up today, I get my inks to refill my OEM carts and was going to buy the $55 software from ink chip, may I ask what you are having issues with?? did it not work at all?
DO you need to purchase this if you are using the chipless ink cartridges? I am thinking about purchasing this printer and trying to get all the specs before I decide.
Hello Hungry, How much can I use approximately the xp 15000 before changing the waste tank or is it possible to adapt an external waste tank? I appreciate your comment. Greetings from Gran Canaria 👋🏾
Hi, the box fills up quick. I recommend buying a chip reset and installing an external waste tank. It will save time and money. Here's how to install an external waste tank. ua-cam.com/video/uMvxm1qhrWk/v-deo.html
Hello Hungry Boy, Two questions bro! How long have you been working with that XP 15000? Have you tried leaving the metal plate with the two end rollers. Thank you for your videos 🙏🏾👍🏾
Haha Hi what up bro! Briefly it has fatal code, I haven't had much success with the Xp-15000, that was my 6th one. I mainly use the Et-8550. Yeah you can leave the rollers in and just remove the pinwheels the design will pass under.
@@HangryMuscle Well Well Bro thanks and what about you? Me here in the daily fight. Whatttt 😱😅 that you have used 6 in a year?. I imagine you use two sets of cartridges one for ink and one for cleaning. What are the most common problems with the XP 15000? Sorry for all the questions but I know you have plenty of experience with this printer. Here they are very cheap at 250 euros, that's why I want to try it. Thanks thanks a lot for you great help 🙏🏾💪🏾🤝🏾
I tried this recently and the error threw me off. Do you know what the firmware version was on the printer before and after the chipless firmware? I don't want to spend $50 if it won't work for me!
Are you referring to the Error at the end when the software reaches 99%. That is normal, click next and once the printer restarts it'll be chipless. I've done it with 6 different printers haven't had an issue.
@@HangryMuscle ok I just got the printer couple weeks ago. I wasn't sure if it only worked on older firmware versions? Have you tried it recently? The inkchip instructions state to check the version before activation - as it should've changed. Mine hasn't. There's youtubers reporting that it no longer works. Seeing the code is non-refundable, I'm trying to verify the details before purchasing.
@@OpenFilmmaker I converted one this month. You can update the printer firmware by going to epson and downloading the latest drivers and utilities. The instructions are in the video
Is there anyway to completely bypass the maintenance box chip? Why doesn’t the firmware have it read full all the time? Super annoying to keep pulling the maintenance box despite having an external waste tank.
I much prefer the ET-8550, I had too many issues with the Xp-15000 and its hassle to maintain, daily cleans and constant refilling. I don't have any of the issues with the Et-8550
@@HangryMuscle sorry for the typo. I meant to say that msg popped up on mine at 83% after I press next ( not retry) do I keep waiting for it to go past 83% or do I press finish and move on the last step which is buying the chip key
Sure, we can do a video call session. You can sign up on my website. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Hi, no this is so you can use third-party refillable cartridges in the printer without chip sensors. If you need help with your maintenance box reset. Check this video out ua-cam.com/video/4A0Zy40Fc4c/v-deo.html
When I click activate online that window never pops up. If you could walk me through this process it would help a lot because asking the company for help is useless.
Hello. I just followed your steps my printer prints blank. do you by chance know what is causing that. i am so frustrated. i cannot any solution to that. please help.
You have been a God send. Thank you so much for sharing this information! I was to the point of either breaking down crying or throwing all of this out the window last night. I worked on trying to convert this for hours! And this morning I found your video and did everything step by step as you stated and it WORKED! THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!
When I open the Activation, it doesn't allow me to select a device. The section is blank. What do I do now? I've already purchased the code.
I just want to say thank you for clarity I watched so many videos and yours was the only one that informed me correctly how to set chipless firmware up
Thank you so much for this video. Ive been trying to get this done for about 6 hours now. Did a step by step on your video and it worked on the first try. Life saver!!
my printer has been sitting for 2 week i haven't been able to convert it until today Finally some real help... thank you I was able to convert it....
You are welcome!
Thank you! Thank you!! I was just so fed up because of the error code saying my printer wasnt connected. It would get to 99% and that was it
Thank you SO MUCH for your videos! I’m trying to install chip ink and I’ve got a message on my printer screen that a firmware update is available. I assume I ignore that?
Hey again , thanks for responding it was some setting blocking me got that squared now I’m all done thank you so much really appreciate you man , now not to bother you again lol but you mentioned initiation process ? Where can I find that video ?
OMG!!!! I'm late to the dtf game, but OMG!!! You helped me SO much!!! I paused at each step till it was done and viola! I have ink chip installed. So many thanks!! Other videos just didn't cut it for me. Your video was a true blessing!!!!!🥲
Hello, so I am new to the DTF world, but I have what may be a stupid question, but I just watched your video on you using the OEM cartridges taking out the manuf ink and replacing it with DTF ink, so if your using the OEM cartridges why do we need to get chipless software? Cause we're just replacing the ink, I'm sorry if its stupid, I'm asking because I am in the process of trying to buy alllll the supplies I need to get up and running, thank you in advance.
did you get an answer?
If u dnt have chipless firmware you will have to replace your ink cartridges everytime otherwise with the chipless u can use same ones over and over again
This was a great tutorial and very informative. Got my xp15k setup. I also used your discount count, thank you.
Appreciate you watching and thank you for using my code. Glad I could help brother💪🏾
@@HangryMuscle hey can u tell me the discount code so I could buy it also
@izzysc24 Discount code: Hangry
Thanks for the video very much helpful.
So I converted my xp 15000 to dtf with C.I.S ... and chipless
But I was able to print the white all four other colors print when my nozzle check but not the white..
Can it be the wrong type of white..
Or any suggestions?
My activation will not pull up printer selection. How do I get it to show printers to select from?
Buenas tardes Javier, de casualidad no tendrán un video en español explicando paso a paso (para principiante) de como convertir a DTF la impresora XP15000, muchas gracias
Hi thanks for you video your content was so helpful. Just wanna ask a question how often you do a maintenance of epson xp-15000 if it is converted to dtf printer, and do you replace the cartridge pr just refill the ink? Thanks in advance for your response. God bless you.
How did you get the printer software to install without initializing the set up the printer. And do you put original OEM carts in the printer to be able to install printer software. I was told to never use the original ink. I'm stuck.
I have a converted printer Epson xp15 000, but the white ink is not coming out. I put white ink in the red and gray catridge. Do I need to set it somewhere in the software? What is the problem here? Thanks a lot for helping me out x
Thank you so much!! I've been trying to figure this out for a week now!
Glad I could help! If you ever run into trouble, I have DTF coaching available. I can help you solve any issues you might be having.
www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Uhggg so frustrating !!! Once i finish the firm update my printer doesn’t come up when I start the activation process . It’s just blank . What do i do ??
Do you know if this will work with regular ink? I just wanna save on buying cartridges . I’m not wanting to convert to dtf
You're a lifesaver
does anyone get a read fail when they try to hit activate online?
Did you ever get pass this problem ? I’m having the same problem right now it’s killing me 😢
It never reaches 100%, when it fails press continue (not retry) then the printer will shut off and restart. After the restart it should be chipless
@@HangryMuscle what about once you finish everything with the firmware and click activate online but read failed -1 keeps coming up ?
I downloaded the chipless firmware. After it was finished, I put my new ink cartridges in with my dtf ink and the printer is telling me to "insert ink cartridges" like they aren't there. Need help?
Hey Hangry Thank you for all your very informative videos. Did you have to do this process with each printer you had to replace from the XP15K
You're welcome 🤙
Yes you'll need to purchase a new activation code for each printer. The chipless firmware isn't transferable to different printers.
@@HangryMuscle Thank you for responding, I'm on my 2nd XP15k. Would I need to download the drivers too?
No
@@HangryMuscle Gracias :)
Hey! I got a quick question. I bought new XP-15000 and installed the chipless firmware . However, my machine only prints blank page for some reason. I can't even run test print. Do you know the reason? I don't have CISS byw.
You probably have a clog or your carts are not primed.
Thanks a lot! You saved me with this tutorial!
I'm stuck on step 5 of the inkchip update. I have my printer plugged in, but it's not populating to proceed to the next step
So I already have chipless firmware on my xp15000. Want to install printer to my laptop. With the cd that came with the printer. But I don’t want to mess up my chipless firmware any tips would be helpful?
Great video, thanks! Maybe a silly question but does the firmware get updated in the printer? Just asking as I'm have a bit of trouble with my printer driver and I may want to delete that and reinstall
Do you need the cartridges in the printer mine keeps getting error saying the printer can't be updated (xp-15000)
Do I still need rip software after converting my cartage to Chipless cartage. I’m seeing a lot people converting their xp-15000 and downloading the chipless software and converting the original cartage to chipless and they don’t bring up the rip software. I already converted my ep-15000 just want to know is the chipless software good enough to start printing. Appreciate you if you can help
ua-cam.com/video/y_49xu3cuoc/v-deo.html
hey! i have been having issue after issue with trying to install the firmware. finally got it to install, bought my activation code and now every time i click activate online it says "read failed - 1" do you know why this could be?
I did step by step and it initialized but still printing blank pages? Do you have any suggestions for me? Thank you so much!!
Great video. Thank you.
You bet, appreciate you taking the time to watch, thank you!🙏💪💪💪
Als ich es zum zweiten Mal aktiviert habe, nach der Reinigung, ging der Drucker aus und funktionierte nicht mehr, also habe ich den Strom abgezogen und eine Viertelstunde gewartet und neu gestartet, aber sobald ich versucht habe, mit dem Passwort das zu aktivieren Ich kaufte, der Drucker funktionierte nicht mehr
Thank you used your discount code.. so far next issue is I can't seem to get the white to print. Color works just fine just no white
Do you have white on your nozzle checks?
@@HangryMuscle I don't see white on the Nozzle check
Nevermind I did a print on film and there is white just like one or two lines don't understand it's brand new out of the box how can it be already bad :-)
well update i did several head cleans only for the machine to tell me now "Print Head Adjusemnt Cancelled" There is a problem with the Print head" Wow it's brand new out of the box took me days to finally get it up. Do you know are the activation keys for firmware a one time use if I buy another printer
Hi, I’m watching your video and trying to activate mine but the Activation tool isn’t showing anything in the drop down box and I’ve refreshed and still nothing, what do you think could be wrong ?
Make sure to use a usb cable
@@HangryMuscle I am but it seems to not recognize it and it says network
@@HangryMuscle It worked that you so much for the quick response. 😁
I'm having the same issue. Activation tool isn't showing anything in the drop down box. I've refreshed several times...still nothing. I didn't see a response as to what to do, so I'm here asking for help! It's been 4 hours of me repeating all the steps in the video and I still can't get my printer to show in the activation tool.
Can you please tell me what cleaning solution you use?
Hi i use this kit
dtgpro.com/cicproduct/dtfpro-epson-univ-maintpack.php?afl=3277
@@HangryMuscle thank you for your help.
@@HangryMuscle thank you so much for sharing!
What rip software do you use for this? My friend just bought one and the rip software suggested to her is $500
Hi, I use Acrorip. You can get it here for 379. For an extra discount Use code: Hangry
dtgpro.com/cicproduct/acrorip10-5.php?afl=3277
Ummm I know this video is kinda of old but I followed all steps , after clicking my printer , then clicking activate online Read Failed -1 keeps popping up can you help please??????
I know Epson can get gnarly with their firmware updates, does this method of rendering the 15000 chipless still work currently today?? I'm about to invest into a few of them to convert and refill OEM carts for my print shop.... just want to make sure it still works in todays times before I invest so much into it...
@Ida I was literally about to try setting mine up today, I get my inks to refill my OEM carts and was going to buy the $55 software from ink chip, may I ask what you are having issues with?? did it not work at all?
On my activation it doesn’t show my printer I’m connected with WiFi and not usb. Could that be the problem ?
DO you need to purchase this if you are using the chipless ink cartridges? I am thinking about purchasing this printer and trying to get all the specs before I decide.
Yes because if not you would need to keep replacing the chips on the cartridges
Can I do this to convert to eco solvent on a xp 5k as well?
Hello Hungry,
How much can I use approximately the xp 15000 before changing the waste tank or is it possible to adapt an external waste tank?
I appreciate your comment.
Greetings from Gran Canaria 👋🏾
Hi, the box fills up quick. I recommend buying a chip reset and installing an external waste tank. It will save time and money. Here's how to install an external waste tank. ua-cam.com/video/uMvxm1qhrWk/v-deo.html
@@HangryMuscle thank you my friend...where I can buythat chip reseter?
I appreciate your help 🙏🏾 ☺
ok im confused a little, so i will need to make my xp 15,000 chipless plus i need acrorip aswell ? both ?
Yes, Both programs serve different purposes
Did you still need a RIP software using this conversion method?
Yes
question... does this mean that I can use my epson eco tank ET-15000 as a DTF? if so... where do I put the white ink in at?
ua-cam.com/video/y_49xu3cuoc/v-deo.html
Hello Hungry Boy,
Two questions bro!
How long have you been working with that XP 15000?
Have you tried leaving the metal plate with the two end rollers.
Thank you for your videos 🙏🏾👍🏾
Haha Hi what up bro! Briefly it has fatal code, I haven't had much success with the Xp-15000, that was my 6th one. I mainly use the Et-8550.
Yeah you can leave the rollers in and just remove the pinwheels the design will pass under.
@@HangryMuscle Well Well Bro thanks and what about you?
Me here in the daily fight.
Whatttt 😱😅 that you have used 6 in a year?.
I imagine you use two sets of cartridges one for ink and one for cleaning.
What are the most common problems with the XP 15000?
Sorry for all the questions but I know you have plenty of experience with this printer. Here they are very cheap at 250 euros, that's why I want to try it.
Thanks thanks a lot for you great help 🙏🏾💪🏾🤝🏾
Hi, does this work for Mac? I downloaded the firmware and it said there was no application that could open it.
Will going chipless work if the printer was setup with the original cartridges?
Yes
What software is used for prints? Cadlink?
You don’t have to wait for the progress bar to fill before cancelling the update.
I keep getting a SN ERROR when input my code in. Do you know what that means I just purchased it 🤦🏽♀️
I tried this recently and the error threw me off. Do you know what the firmware version was on the printer before and after the chipless firmware? I don't want to spend $50 if it won't work for me!
Are you referring to the Error at the end when the software reaches 99%. That is normal, click next and once the printer restarts it'll be chipless. I've done it with 6 different printers haven't had an issue.
@@HangryMuscle ok I just got the printer couple weeks ago. I wasn't sure if it only worked on older firmware versions? Have you tried it recently? The inkchip instructions state to check the version before activation - as it should've changed. Mine hasn't. There's youtubers reporting that it no longer works. Seeing the code is non-refundable, I'm trying to verify the details before purchasing.
@@OpenFilmmaker I converted one this month. You can update the printer firmware by going to epson and downloading the latest drivers and utilities. The instructions are in the video
@@HangryMuscle I got it to work, thanks for the responses. What a pain that was. Your video was useful!! thank you!!
@@OpenFilmmaker Let's go! Glad you got it. Appreciate you watching. Thank you!
Is there anyway to completely bypass the maintenance box chip? Why doesn’t the firmware have it read full all the time? Super annoying to keep pulling the maintenance box despite having an external waste tank.
No
When I get to the activation, nothing shows up in the printer section.... it's blank. Firmware downloaded successfully.
Use a usb connection
I’m on step 6 but it says it couldn’t be updated. Help me. I’ve been trying everything
Did you get another printer? What happened to your et 8550? Just curious
No I have multiple printers.
I have a couple of XP-15000s, Stylus Pro 3880 and the Et-8550 printer
What do you recommend I get started with xp15000 or et 8550? I already do sublimation but wanted to start dtf.
I much prefer the ET-8550, I had too many issues with the Xp-15000 and its hassle to maintain, daily cleans and constant refilling. I don't have any of the issues with the Et-8550
Thank you. Really appreciate your honesty. God bless you.😊
How do you like you 15000 printer for DTF?? Would you recommend it and do you have a lot of problems with it?
Can you take a used XP 15000 and convert it? Or does it have to be brand new never used to be able to convert?
It can be converted used or new.
@@HangryMuscle Thank you
That msg popped up in mine at 83% do I keep eating after pressing next for it to get to 100 or do I press finish at 83%?
It doesn't reach 100%, press next, not retry.
@@HangryMuscle sorry for the typo. I meant to say that msg popped up on mine at 83% after I press next ( not retry) do I keep waiting for it to go past 83% or do I press finish and move on the last step which is buying the chip key
Can you use that site for any epson printer that take cartridges?
I would check their website, not every printer is compatible
Can i use pigment ink for the epson xp 15000 and does inkchip sells pigment ink for this epson model
What is pigment ink?
You can put whatever ink you want in.
Inkchip only sells software, they do not sell ink supplies.
Hello I have an Et8550 and my prints are only coming out half the image could you please help if possible
Sure, we can do a video call session. You can sign up on my website.
www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
It’s stopping at 14% do you know why it would be doing that? I have the newest drive and the newest ink chip files?
I HAVE AN xp15000
does it wrk for mac. having trouble extracting
No
can ou do this to a xp440
I did all this but the software won’t install it says update failed and the ink levels on the printer show all empty
It doesn't reach 100% during installing, when it fails, press continue (not retry) after the printer should reset and update
This firmware affects the maintenance box chip too?
No its for the cartridges
where it says to select printer on inkchip firmware my printer does not pop up it just sits there loading what am i supposed to do
Might need to put the printer in update firmware mode and use a usb connection if you're not already
Where’s the 2nd part to this?
Why cant I download the activation it says failed insufficient permissions. I am stuck what should I do?
Have you disabled your antivirus?
Got it to work but now activation giving me read failed - 1 what should I do ?
Did you ever get pass this ? Please help ?
Hello, does this help with the waist maintenance tank? Can a mac computer be used?
Hi, no this is so you can use third-party refillable cartridges in the printer without chip sensors. If you need help with your maintenance box reset. Check this video out ua-cam.com/video/4A0Zy40Fc4c/v-deo.html
@@HangryMuscle do you know any software to use for Mac? Thank you for your help!🙂
This one. dtgpro.com/cicproduct/devstudio-rip-a3pl.php?afl=3277
@@HangryMuscle i must say you are very good you are quick on relying and have good informative videos ty I Greatly appreciate it.
Thank you! I appreciate you watching 🙏
Is this done with the chipless carts in or original?
The original cartridges that came with the printer
Nice
Hello I did the conversion and everything prints but the white can you PLEASE HELP????
Sure thing www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Do you know of any Mac software that can do this?
I do not
My printer is not showing up in the activation window 🤷🏼♀️
Can this printer be converted to eco solvent????
Im not sure, I don't have any experience with eco solvent printing.
There's any Free Rip Software Available to do DTF?
No, but cadlink & ekprint offer demos.
its coming up saying read error for activation
mines keeps saying firmware failed to update. Any tips?
And the second round only goes up to 83% is that ok?
When I click activate online that window never pops up. If you could walk me through this process it would help a lot because asking the company for help is useless.
Hi, are you using a usb cable connection between the printer and pc? Is your pc recognizing the printer?
@@HangryMuscle yes I’m using a cable
Do you see your printer in the program?
When I download the firmware it’s nothing to extract
Make sure you downloaded the correct file and that your anti virus program isn't deleting the files
It doesn't give me the option to add my printer when I add my activation code
Make sure your pc recognizes your printer and use a usb cable
@@HangryMuscle it does
@@HangryMuscle still nothing
Can I download firmware to any computer?
Yes
Thanks
How do you get past the asking for a password
Not sure, you can contact the Inkchip customer service.
It says that I have to put the printer password damn it but when I put it it doesn't work sh**
I wish I can upload a picture and show you
Hello. I just followed your steps my printer prints blank. do you by chance know what is causing that. i am so frustrated. i cannot any solution to that. please help.
mine has been stuck at 71% forever
The problem I'm having I'm not seeing my printer
Did you ever get it fixed ?
I just paid $55 and all they sent me was a activation key no downloads
The downloads are posted on the website
NOO!!!! Download the DRIVER only!!
U left the Y out at the start from the last bit u copied n saved.