Thank you.. Very helpful.. But I have any problem after installation I can not print my white (DTF)on my xp 15000. I did multiple head clean nozzle checks, still no white showing even though I see white on capping station.. Any idea how to solve this problem??
I just purchased this printer, and I'm not sure how to covert it. Is there any way you could do a tutorial? Do I need an external waste tank? And what film do I need?
I converted my printer but i am using the oem carts. i drained, cleaned them and refilled them with dtf ink. i installed chipless firmware, drivers and acrorip. i actually watched your video on print settings on acrorip but my printer prints blank. i have not been able to find a solution. it has been a week of searching and i am so sad and frustrated. i do not not what to do. nozzle checks print blank pages. it is a brand new printer. not refurbished.
when doing the initial set up for the first time do i need to use the ink cartridges tha came with it or can i just use the empty cartridges i got for the dtf ink?
trying to get the printer to work. Unfortunately without success. the print looks weird. as if my dtf ink would run and lots of small holes in the white. did you have the same problem?
Hi, have you had issues with the refillables leaking? I read people saying it's better to use oem carts. Got a ciss on the way and just wondering if it will be an issue. Thanks.
I have heard that you can not go more than one day without printing, or the inks start to clog up. Thats the only thing that has been holding me back. Is there anyway to take the ink out and it be ok to sit for a couple weeks to a month???
You need to print often. DTF printers can not just sit for weeks. Watch the maintenance video. DTF is not meant to sit. If you can't handle the time commitment, then please buy your prints instead. DTF isn't cheap and it isn't plug and play. There is daily maintenance of the printers and it's not if but when you have a problem. When everything is running right it's a fantastic process. But when it's bad it's really bad. Not for the faint of heart or those easily frustrated lol
I saw that you have an etsy store where you list printers. Are you selling new printers or new and are you able to take out the cartridge and shake them? Thanks!
I was putting my cartridges in my printer and noticed that the ink was literally pouring out of the bottom. My guess is I got some bad cartridges. I wanted to ask you about that to see if maybe I need to get some new ones. My ink is like dripping off the paper every print no matter how low I see the ink to come out. What is your opinion on that?
Thank for this! I haven't been able to find a good video on filling anywhere!
Thank you so much
only my white been printing out and not the colors even though I did a nozzle clean. I’ll most definitely try this asap
Nice video! Excellent resource if I ever get this printer.
your videos are the best thank you so much ❤
Thank you..
Very helpful..
But I have any problem after installation I can not print my white (DTF)on my xp 15000.
I did multiple head clean nozzle checks, still no white showing even though I see white on capping station..
Any idea how to solve this problem??
Are you using a rip software?
I just purchased this printer, and I'm not sure how to covert it. Is there any way you could do a tutorial? Do I need an external waste tank? And what film do I need?
Go to kingdomDTF and watch his videos
I followed all instructions, but my printer is not printing, any clue what might be happening?
I converted my printer but i am using the oem carts. i drained, cleaned them and refilled them with dtf ink. i installed chipless firmware, drivers and acrorip. i actually watched your video on print settings on acrorip but my printer prints blank. i have not been able to find a solution. it has been a week of searching and i am so sad and frustrated. i do not not what to do. nozzle checks print blank pages. it is a brand new printer. not refurbished.
you should mention where the whites go in what order and how does the printer know where every color is?
why 2 whites and what colors are you omitting? the printer only accommodates certain number of carts.
I am very new and the printer says to check my codes for the cartridges. Am I missing a step? How do I make it chipless? Can you help me by chance
Great video.
Would you recommend using Chipless or Chip Cartridges ?
Thanks
its much cheaper to use chipless but you have to get the chipless firmware. but you can keep using the ones that are chipless
Is there a certain order you have to put tge white inks in?
No. You can put your inks in any order you want. Most prefer to replace the gray and red with the white and leave the CYMK as is.
I’m stuck on the carts not being recognized. I’ve tried everything.Any suggestions.
Hello, how do I configure the white color on my xp 15000, I used it but the white base did not print, thank you.
when doing the initial set up for the first time do i need to use the ink cartridges tha came with it or can i just use the empty cartridges i got for the dtf ink?
You have to use the carts it comes with until you install chipless firmware
@@ssvcustomtransfers thank you
Great video. Thank you
trying to get the printer to work. Unfortunately without success. the print looks weird. as if my dtf ink would run and lots of small holes in the white. did you have the same problem?
Hi, have you had issues with the refillables leaking? I read people saying it's better to use oem carts. Got a ciss on the way and just wondering if it will be an issue. Thanks.
How do you pull the rollers out of this model? Thanks.
Great video. How do you like it so far?
I really like both the XP15000 and the L1800. Both are excellent entry- intermediate level printers.
how do i get my printer to print and what software to use
Do you recommend using oem carts? I only have one sent off cartridges coming and was going to use them for cleaning.
I didn't have luck with the oem carts. I had issues filling them. I just use the regular refill carts.
Did you remove the roller?
I have heard that you can not go more than one day without printing, or the inks start to clog up. Thats the only thing that has been holding me back. Is there anyway to take the ink out and it be ok to sit for a couple weeks to a month???
You need to print often. DTF printers can not just sit for weeks. Watch the maintenance video. DTF is not meant to sit. If you can't handle the time commitment, then please buy your prints instead. DTF isn't cheap and it isn't plug and play. There is daily maintenance of the printers and it's not if but when you have a problem. When everything is running right it's a fantastic process. But when it's bad it's really bad. Not for the faint of heart or those easily frustrated lol
When you first power on the printer it makes you put in the original cartridges to start it, is there any way to bypass this?
I am assuming your talking about a brand new printer not yet converted with chipless firmware. No, it is required to set up the printer the 1st time.
@@ssvcustomtransfers So you have to run the priner with the oem first right?
@@tonelessbod correct
so the chipless firmware makes it so you can add the carts with no chips right?
Correct
If the firmware is updated, how do you fix that?
How many prints before refills carts?
Depends on the designs but on average 10
Please help mine is saying install the ink that came with printers idk what to do it won’t let me dismiss it
You have to set up a new printer with the original ink cart then install chipless firmware.
@@ssvcustomtransfers do you have a video on how to install the chipless firmware
Why did you not use the rear feeder ?
For what?
@@ssvcustomtransfers paper feed
For the regular paper during the checks? Easier to just use the bottom try.
Are these chipless or do you have to download the firmware and convert it to Chipless? This is compatible with AcroRip 10.3? Thanks.
You have to install chipless firmware
Do you use an external waste tank?
Yes I do. More cost effeciant.
I saw that you have an etsy store where you list printers. Are you selling new printers or new and are you able to take out the cartridge and shake them? Thanks!
www.southernsassvinyl.com/products/l1800-converted-dtf-direct-to-film-deluxe-printer-bundle-with-ink-maintenance-supplies-and-acrorip-software-1-beginner-dtf-printer
I was putting my cartridges in my printer and noticed that the ink was literally pouring out of the bottom. My guess is I got some bad cartridges. I wanted to ask you about that to see if maybe I need to get some new ones. My ink is like dripping off the paper every print no matter how low I see the ink to come out. What is your opinion on that?
Yes get new and don't use those. You will flood your printer.