TYVM for this. I found the manual to be very confusing. Installation was a breeze but programming was non-intuitive for me and I could make no sense out of the manual. Your description was perfect and I was able to set my thermostat and understand the programming by the end of this video - can't thank you enough for doing this!
Thanks for your video. It helped me a lot. One question. Does the heat only come on up to the comfort zone. I have that set at 68. But when I see 70 that means that’s the room temperature. The heat won’t go on over what I have it set at. Is that right? I’m concerned about my electric bill.
Great video but I have just one question . I would like to set A Sunday morning temperature of 23° from 7 AM to 11 AM After those four hours on Sunday I wanted to go to 5° and stay there till the next Sunday.
Hi @Radiant your help is much needed. i have made the settings as suggested in video,i can still see the heating symbol on screen but neither the automatic nor manual setup is not working.can you suggest something.
Confused time about time n minutes settings- today is Friday and I hv set 07:30 on screen, this is the time I want the heating to turn on , until wot time it will stay on and when heating will start , it’s 7:44 now- no heating
@@ambermclaughlin3852 omg - some how it got up To 80 🔥☄️ lol I dnt wnna mess with it tho lol I just use the ON/off switch and listen for the click ! 😂 I still hate this heater !
You mentioned it is faster to set all days for program and turn off day you don't need. I want mine to run mon-fri. And off sat and Sunday. How do I do this? Thanks
Will you please explain how to remove the cover to get to the micro switches? I'm afraid it will break the plastic if I attempt to pry it off improperly. Also, you wrote switch 3 is for "AF", what is AF?
Default is C. You have to take the cover off and the unit on the wall is where this is set. Those little switches that show 1, 2, and 3 represent: 1 up position=F; down position=C....2 up position=early start so if you set the unit to come on at 6 am, if this is up, the unit will start earlier so that at 6 am, the temperature will be at that temp already; 3 is for AF mode so you probably want this up.
I want to control this unit manually. I follow the book’s instructions, but when I later go back both the day and night settings are back up higher than I set. What am I doing wrong? Thanks in advance for any help available. This is frustrating.
No, it’s electric underfloor heating just like an electric blanket on a bed. The resistance of the wires to the electric current is what warms the floor and air above it. It doesn’t do cooling.
great video but i have a question. Does this unit require a battery. I have the same unit for approximately 8 yrs and now it is not working and no display. The power to the unit from the breaker seems to be ok. Perhaps the battery needs to be changed. If so what battery is required> Thank you.
@@irenelabonne6068 I ended up having an appliance repair company come out, and it turns out that it was the panel I need to replacing, costing $400 for parts and labor. Now it works fine.
Economy is the lower temp you program into the thermostat for the hours you are away or sleeping and want to 'economize' . . . (house icon #2 and #4) Comfort is the higher temp you program into the thermostat for the hours you are home and want to be 'comfortable' . . . . . . . (house icon #1 and #3)
In a temperate climate you can think of economy temperature as the “off” temperature. For when u don’t need any heating such as during the day. But in cold countries in winter you might still want to set to a minimum, for example 2 deg C to stop the pipes freezing
I have been dying in my apartment and nobody could explain how to work the ac… thank you so much
TYVM for this. I found the manual to be very confusing. Installation was a breeze but programming was non-intuitive for me and I could make no sense out of the manual. Your description was perfect and I was able to set my thermostat and understand the programming by the end of this video - can't thank you enough for doing this!
How to fly a 747 might be easier
Great video, very helpful. But I would also have liked to see how to manage the Away function, hinted at by the suitcase icon.
I'm wondering this as well.
I just want to turn the heat on
Thanks for your video. It helped me a lot. One question. Does the heat only come on up to the comfort zone. I have that set at 68. But when I see 70 that means that’s the room temperature. The heat won’t go on over what I have it set at. Is that right? I’m concerned about my electric bill.
Great video but I have just one question . I would like to set A Sunday morning temperature of 23° from 7 AM to 11 AM After those four hours on Sunday I wanted to go to 5° and stay there till the next Sunday.
Hi @Radiant
your help is much needed.
i have made the settings as suggested in video,i can still see the heating symbol on screen but neither the automatic nor manual setup is not working.can you suggest something.
this unit doesn't have cooling does it?
Great vid, but you say that the on/off button will be displayed when the system is on, yet the manual says the opposite… which one is it?
Thanks 😊 I never know everything in our life 😊
Confused time about time n minutes settings- today is Friday and I hv set 07:30 on screen, this is the time I want the heating to turn on , until wot time it will stay on and when heating will start , it’s 7:44 now- no heating
This is real programming
I’ve never had to UA-cam how to use a heater until this one 😵💫😂 I hate it lol I just need 70 everyday all day..
Dang..70 is way too hot 🔥🥵
@@ambermclaughlin3852 omg - some how it got up
To 80 🔥☄️ lol I dnt wnna mess with it tho lol I just use the ON/off switch and listen for the click ! 😂 I still hate this heater !
@@GENAEARIJACKSON There IS no on/off switch. I'm looking at the switch panel to shut it off
You mentioned it is faster to set all days for program and turn off day you don't need. I want mine to run mon-fri. And off sat and Sunday. How do I do this? Thanks
Set the week first, then change sat and sun individually
Will you please explain how to remove the cover to get to the micro switches? I'm afraid it will break the plastic if I attempt to pry it off improperly. Also, you wrote switch 3 is for "AF", what is AF?
Monitoring both Air and Floor
There's a set screw at the bottom of the faceplate loosen up to get desired effect face (cover removal)
Does it always have to be shown as Celcius and if not how do you change to F?
Default is C. You have to take the cover off and the unit on the wall is where this is set. Those little switches that show 1, 2, and 3 represent: 1 up position=F; down position=C....2 up position=early start so if you set the unit to come on at 6 am, if this is up, the unit will start earlier so that at 6 am, the temperature will be at that temp already; 3 is for AF mode so you probably want this up.
I want to control this unit manually. I follow the book’s instructions, but when I later go back both the day and night settings are back up higher than I set. What am I doing wrong? Thanks in advance for any help available. This is frustrating.
This is happening with me! Did you fix it? I don’t know what to do, I really regretted doing it ):
Maybe a dumb question but can this system also be used to cool down your house.
No, it’s electric underfloor heating just like an electric blanket on a bed. The resistance of the wires to the electric current is what warms the floor and air above it. It doesn’t do cooling.
How to skip 2 and 3 programs? I want 6 am to 6 pm on...them 6pm to 6am off..
great video but i have a question. Does this unit require a battery. I have the same unit for approximately 8 yrs and now it is not working and no display. The power to the unit from the breaker seems to be ok. Perhaps the battery needs to be changed. If so what battery is required> Thank you.
I have the same problem. Can the wall unit be 'burnt out'? Is there an alternative to having to replace the entire unit?
I hooked mine up to power, turned the breaker back on, but the unit will not power on. I followed all of the instructions in the manual, but no luck.
I have the same issue it's dead! one year old.
@@irenelabonne6068 I ended up having an appliance repair company come out, and it turns out that it was the panel I need to replacing, costing $400 for parts and labor. Now it works fine.
How do you change from centigrade to Fahrenheit?
I'd like to know too!
what is an economy temperature and comfort temparture mean?
Economy is the lower temp you program into the thermostat for the hours you are away or sleeping and want to 'economize' . . . (house icon #2 and #4)
Comfort is the higher temp you program into the thermostat for the hours you are home and want to be 'comfortable' . . . . . . . (house icon #1 and #3)
In a temperate climate you can think of economy temperature as the “off” temperature. For when u don’t need any heating such as during the day. But in cold countries in winter you might still want to set to a minimum, for example 2 deg C to stop the pipes freezing
To confusing it drives me nuts! I want a old fashion heater turn the heat on and off with a dial to turn the temp you want that's it that's all.