How to Replace Cooling Fan Assembly 05-14 Subaru Outback
Вставка
- Опубліковано 18 вер 2018
- Buy Now!
New Radiator Cooling Fan Assembly from 1AAuto.com 1aau.to/ia/1ARFA00302
1A Auto shows you how to repair, install, fix, change or replace a broken radiator fan. If your car overheats or runs hot and the radiator cooling fan will not turn on, then this may be your solution. This video shows the process for the 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Subaru Outback
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oady/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oady/1AXAA00013
• 17mm Wrench 1aau.to/ooC/1AXAA00010
• 12mm Socket 1aau.to/oZL/1AXAA00015
• 8mm Socket 1aau.to/oTc/1AXAA00017
• Trim Tool Set 1aau.to/on9/1AXXX00004
For More Info visit us at 1aau.to/h/a8z/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Maybe on this model this is the correct way to do it but I changed my 2013 outback in about 20 minuteswithout pulling the radiator.
Very clear and well thought out video! Thanks very much.
+David Doerschuk Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Can you explain why it is necessary to remove the entire radiator to do this job? Seems like this could be done without doing all that extra work...the bolts are even at the top for easy access. Not trying to be critical, just wanting to understand.
You can remove the fan only.
This video should actually say 2009-2012. For the 2002-2009, the cooling fans have a clip that holds the transmission cooler line and it is very hard to reach. For the 2009+ they removed that, so I agree it seems like it would be quite easy to pull the fans out individually without removing the radiator.
This video also appears to be geared as a "radiator replacement" because they stripped the radiator completely and then reassembled it?
you do not need to remove any of that. pull ur car up on ramps/ brake and block it/remove engine cover top and splash shield bottom/remove over flow tank it pops off/disconnect both fan plugs 4each 10mm or 12mm bolts on top, pull up fan drop down to ground from engine bay/ fix whatever it is and reverse
Thanks for this video! We had this replaced on our 2017 outback 3.6r but only the passenger side radiator fan turns on when we have the AC on and idle. I’ve tried a bunch of different ac settings but none of them make the drivers side fan turn. Is this normal?
check your relays go to the outback forums
No cap this helpd
I assume going through all this work taking out the radiator before the fans is to avoid possibly damaging the radiator and/or tranny hose???
This should be titled “how to replace a radiator”, 95% of these steps are completely unnecessary for fan replacement, very misleading to unknowledgeable people. Turned a 10 minute job into an hour. 😂😂😂
This lady’s voice sounds just like my Female Boss
A no nonsense BOSS !
Dumb question; do I need to fill the tranny fluid back up and if so, how much?