David, I think too many viewers of yours are missing a few important facts. 1. This is YOUR boat. 2. As you are the owner, you can jolly well do anything you want to it, even glue pink flamingos over the entire outside if you should have the urge. Carry on Sir, and enjoy YOUR BOAT.
My friend and I did exactly the same job on his open Dory. We found out that the original transom was made up of layers of plywood. We replaced it with one solid piece painted with resin and then re glassed the transom. That boat is now towed all over the place making regular trips to Scotland with a 75hp outboard motor hanging on the back. Good luck from “Keith’s Broken Boat”
I love your do it yourself attitude! This is why we watch. My wife and I are from St. Louis Missouri and boated on the Mississippi river for 20 years. Keep up the good work.
I found this cliff hanger video absolutely riveting to watch. Will it come off, if not why not?. Yet the best part is your resolve that regardless of what comes along you can fix it. When part 2 comes along I'm preparing a cuppa and a chocolate biscuit just for my nerves.
Oh, my goodness. I have laughed until I have tears running down my face. You are so funny, and I am absolutely floored with your ability to remain calm in such stressful situations. I absolutely love Vandemonium and think this is even better. This cliff-hanger is horrible. Please hurry back with the next episode. Thank you! Becky W.
It's always a choice between DIY (Do It Yourself) or PSE (Pay Someone Else) ... I respect David's confidence in fixing things as they come, and love following this project.
The thing with small and old boats - getting someone to do things can get easily that expensive, that it would cost more than a similar boat without that problem. Most older boats are total economic losses the moment you buy them and will just be "worth" it, if you try to do most things yourself.
First of all, I enjoy your multifaceted approach to this channel. This Yankee has learned quite a bit from your efforts. Secondly, and perhaps more importantly I think most of the viewers have faith in your ability to adapt and overcome. I look forward to your future videos.
To paraphrase, "Bravely bold Sir David, rode forth from Camelot..." This IS going to work, but, as with all my projects, inconvenient things 'turn up'. I loved the phrase, 'Suddenly a little torrent of brown yuck.' Sounds like one of the dinner parties I have attended. Thank you, David, for your SAS-esqe fortitude -Who Dares Wins!
I am sometimes (most times) too nervous to do a project for fear of screwing it up. Your answer to the suggestions of hiring someone at 3:50 has inspired me. Keep up the great work! Love your vlogs!
For me you’re doing it the right way and not rushing at it like a bull at a gate…. It’ll be great when you finish, it’ll be sooo much stronger and you’ll know exactly how it’s put together (not the case if you pay to have it done by someone else) … Sure they’ll be setbacks and unforeseen things but once completed they’ll be a huge sense of achievement of which you can be proud …. Also think about all the folk you are helping who will also be having a crack at this repair in the near future… this video series will be a ‘go to’ for fiberglass canal boat transom repair …. Great video thankyou for taking the time to record your efforts 👍
I've been following this channel (and Vandemonium) since basically the beginning. I have no doubt you'll see this project through til the end; complete and better than ever. Looking forward to videos of the boat back out on the canals!
I loved your little rant at the start about people telling you to pay somebody to do the job. As you quite rightly said, the fun is Doing it Yourself. The clue is in the name DIY!
All very interesting! Your bevelled joint is, I think, called a scarf joint, much used in wooden-boat building. I do like your attitude! I have a 'desert island' approach to fixing things, using what I have on board wherever possible. DIY is indeed not about getting someone else to do it. 🙂
Best of luck. I have learned, over the years, that nothing ever goes as planned. That you suspected that something would go awry, speaks to your experience in this department.
No worries Dave you make us laugh and I`m just watching your latest episode and the hornet was having a fine time. lol. Keep up the good work your videos are a must in our house .🥰
I love your eagerness and enthusiasm when you started, I had that when I first got my rotten boat. Unfortunately it didn't last😂. Nearly two years on I'm (very) slowly getting there, just got the fun of the engine to sort next. It's easy when you say it quick.....sort of! I second your opinion of Fish Bump TV, he's great at explaining things in a way you can understand and seems to be a genuine nice guy with lots of knowledge to share without a load of waffle. Highly recommended 👍
I am 66 years old. When I was young and living in Southern California, I was "rented out" (child labor) to work on Fiberglas projects - boats mostly. To this day, I hate Fiberglas. I breathed in so much of the stuff that I lost my sense of taste and smell for decades. So, you have my deepest sympathies.
You are fantastically English. It is wonderful to listen to you. It brings a such warm sense of familiarity. You should be proud of your bravery for such an endeavour, it is no small task. I look forward to your updates! Greetings from the midlands.
Love your logic, that its "YOUR D.I.Y." scheme, successful or not. We are only here to watch. I personally will come along, looking over your shoulder, as it were, to enjoy the whole experience and celebrate in your triumph at the end and we witness your re-launching, back onto the waterways. Always enjoyed your channel before, no reason to doubt you now, just take care.👍👍👍
How to scrap a boat: 1. buy inflatable kayak and manual drill 2. load said kayak and drill on back of boat 3. drive boat to center of river (preferably the Themse, but most other deep bodies of water will do) 4. Drill hole in bottom of boat (be sure to also drill holes in any flotation devices) 5. get on inflatable kayak 6. row away 7. watch problem solve itself 8. leave country 9. change name
I have a 20ft sail boat and have learned all my repair 'skills' from DIY... only way to learn - thank you for being brave enough to video it all for our enjoyment.
Loved the video and (especially) the rants, can't believe viewers haven't seen the van channel. Don't scrap Twiggy lots of content there and amusement for us.
You certainly have a project. Can't wait to see how it turn out. After working in a yacht dealership as a mechanic for over 10 years, I highly recommend that you keep the garboard drain plug. I have seen boat owners leave the plug screwed in when the boat is out of the water for the winter. The boats then can get filled with water from snow melt and rain and in essence sink while on the shore. Removing the plug when the boat is out of the water prevents that from happening. The threads on the plug are tapered like in pipe threads and makes a natural seal. You can always add some Teflon tape on the threads for a little piece of mind.
As you have said David, you will never learn anything until you Do It Yourself. Nothing ventured, nothing gained old boy. But as usual David, It will all come together in the end. Happy day's. 🖖👍If you know the enemy and know yourself, you need not fear the result of a hundred battles. Or something like that. 😉
I’ve watched nearly every video of yours as I’ve followed you over the years. This is the most animated I’ve seen you. Mad scientist comes to mind and that boat is your Frankenstein!! 😂
I'm enjoying this series immensely. I can't wait for the next episode abd see what's under that fiberglass. Good luck on getting it off and hopefully no more surprises.
David, I have watched many of your submissions over the years, and humbly ask you to have a good cup of tea, think things through, and get on with it! (And make sure to video it so I can learn too!) 👍
You could do with one of those little cheap USB borescopes that fit onto your mobile phone. That might give you a bit of a view in between the layers or tell you whats wood and whats fibreglass. But yes, scary job indeed! brave man.
I just enjoy being part of what you do - just fun watching another person go about doing things. Don’t let others get you down. I often forget to hit the like button but I always enjoy what you are doing. Frankly, your DIY projects are my fav videos. I have a “Best of David” playlist I’ve created for my enjoyment - starts with the baking bread episode, includes the shower remake, … I do watch the Van channel you have as well. - your standing shower was one of my favs. I tackle things on my own as well so I understand your desire to just do things yourself.
Scrap a boat ? What a novel concept. I was under the impression that the procedure of surrendering a boat project was to sell it on to a new restorer 😁
Your BOAT is putting up a good 'scrap' as well! The best way to scrap this boat is probably for you to continue to work on it.😇 Thus far, it seems salvageable.😊
You are hilarious!! So entertaining! Your voice and persona was on high alert for the whole video. I was on the edge of my seat and didn’t take a breath until you said “cheerio” ! Thank you 😁😁
Brilliant video David and it looks like you fooled most of the viewers. Well done for exploring the boat construction with the multitool and you now have full understanding of the construction details. Now that the difficult bit is out of the way - looking forward to the next phase where you absolutely smash the rebuild of the transom which is clearly well within your capabilities.😀👍⛵️
I know nowt about cruising, am terrified of locks and get seasick on the pirate ship at Scarborough. Yet here I am, mesmerised and totally invested in one man and his boat. I got the nervous sweats for you. Xxx
I feel for you (and for myself as it's bringing back terrible memories 😢). Always a pain when one's carefully crafted assumptions and intelligent guesses are found to be wrong. Don't suppose there's a drawing of the construction to be had?
No plan of battle survives contact with the enemy. You can make all the plans and take all the precautions you want, but typically the moment the first round is fired, it's all in the bin, and you're just making it up as you go along. Have fun, and good luck!
David, we just love your DIY. There are always knuckle-heads who try to bring us down to their level. Should keep their opinions to themselves if they have nothing good to say. Love your explanations & humour. Good luck. Regards from New Zealand.
A complete joy as usual David....out of all your vlogs (and I've seen them all) this might be my favourite. From one DIY numpty, whose expertise is far, far inferior to yours (anything I attempt invariably gets labelled as 'rustic'...that covers a multitude of sins) I applaud your enthusiasm and application. I await the sequel with great anticipation.
The hand built fiberglass over wood boat my girlfriend had ( and thankfully sold) just had a 1/2" deep bilge. Bilge pumps only remove water to 1/4" so there was water there all of the time. We could not find a pump that drained it all out. We had to sponge out water before we could go anywhere. And the Marine supply place we used once commented when we checked out with under a $100 amount and they were impressed..Heck, the anti-fouling hull paint was $300 a gallon. I forget what we were paying for the epoxy. She has now bought a 1782 era house the we are restoring. Similar issues but just larger. I really enjoy your channel!
I like your channel as is! I’m speaking of the diversity of subjects, canals restoration, different boats and their owners, even coal barges. Monty Python didn’t just sing “Spam, Spam, Spam”, so you shouldn’t just maim small yellow boats 😂. Keep up the good work
About a week of itchy skin ahead, long sleeves maybe an idea to reduce the itchy feeling. That 49 year old fiberglass loves to give a reminder, I wish I had wormed long-sleeved shirt. Life is a learning curve that never ends.
Congratulations!!! I am glad to see that I am not the only one who figures out the situation, after starting to do the work! It was very surprising how you seemed much calmer about the transome situation, then you seemed to be about responding to comments and answering questions at the front of the vlog. I very much enjoy your content, even though it is not all about referbishing the current project. Thank you!!!
Scrapping it is as ez as slapping a for sale sign on it, but don't throw in the towel just yet, we've watched you accomplish much more daunting tasks than this! Nevermind the laughing or cursing you may hear in the background. 💪👍
If I may offer some constructive advice? Find a decent sized roundabout and trailer the boat there. Tip it on its side and fill it with soil and flowers. Will look lovely in spring. You're welcome :)
If I may suggest and if you have the resources, think about a portable battery pack (those 200 Wh or the like) that you can put in your van(demonium) so that you can charge tools. Farmcraft101 actually has quite some reviews on those.
@@CruisingTheCut true! Forgot that you have big batteries. What I meant is that there portable batteries are portable. That is even without van one can carry them.
You’re a brave soul for taking on such a project! With that said, like you mentioned, you’ve accomplished some amazing projects spot on! Looking forward to seeing the end product.
Kudos to you for having a crack at it - I've just had the transom replaced in my boat, it was EXPENSIVE!! Mostly labour, so you can save a ton by DIYing it. A tip - use a composite material for the new transom, not wood. It's a bit more expensive but it will never rot again. Here in Australia we call it thermolite, in the US they call it coosa board. That's if you're planning on keeping the boat.
David, I think too many viewers of yours are missing a few important facts. 1. This is YOUR boat. 2. As you are the owner, you can jolly well do anything you want to it, even glue pink flamingos over the entire outside if you should have the urge. Carry on Sir, and enjoy YOUR BOAT.
Thank you, YES, and even if it sinks, I've still enjoyed the learning and the experience!
@desertrose2059 - ooh! Yes! By all means, pink flamingos! 🦩🦩🦩🦩🦩🦩🦩😂😂😂
Absolutely! Well said! Out of curiosity, I wonder how may of the negatively commenting "experts" speak from actual experience? 😊
Lorna would love it if you painted pink flamingos all over your boat…😂😂😂
Precisely! Well said, carry on David.
I think the process of scrapping a boat starts with cutting off the transom......
😳
😂😂😂😂 now that was funny! 👍
😆😆🤣🤣
😂
David, hire some boat elves to help!
I can't believe you didnt call it "cutting the cruiser"... Hope it all goes well in the end
LAMO
Exactly my thoughts. But 'cruise-r' with very tiny letters - as the boat is. 😂
Quit talking for nothing..just get on with it
I have done this repair, don't freak out it is doable, and you can make the boats transom even stronger. Don't give up.
My friend and I did exactly the same job on his open Dory.
We found out that the original transom was made up of layers of plywood.
We replaced it with one solid piece painted with resin and then re glassed the transom.
That boat is now towed all over the place making regular trips to Scotland with a 75hp outboard motor hanging on the back.
Good luck from “Keith’s Broken Boat”
Poor Twiggy. It always looks worse before it gets better. Good luck, sir.
It’s your boat, your project, you do you! Having fun following along on the discovery.
Go for it David. I learned to build boats, both wood and fiberglass, make your mistakes, learn things first hand. I never regretted the mistakes.
This is what I call jumping in with both feet !!! Can't wait to see how it goes !! Cheers from Florida.
You and me both!
I love your do it yourself attitude! This is why we watch. My wife and I are from St. Louis Missouri and boated on the Mississippi river for 20 years. Keep up the good work.
Oh, David! I know nothing about boats, fixing, changing, but your videos are so amusing and watchable. Keep going and enjoying!!
Judging by all the UA-cam recommendations I get, the easiest way to scrap a boat is to sell it to another UA-camr...
I found this cliff hanger video absolutely riveting to watch. Will it come off, if not why not?. Yet the best part is your resolve that regardless of what comes along you can fix it. When part 2 comes along I'm preparing a cuppa and a chocolate biscuit just for my nerves.
If I only would have 1/100 of your energy. You are an awesome inspiration!
Hahaha I take a nap every afternoon so I'm not entirely sure that's correct!!
Oh, my goodness. I have laughed until I have tears running down my face. You are so funny, and I am absolutely floored with your ability to remain calm in such stressful situations. I absolutely love Vandemonium and think this is even better. This cliff-hanger is horrible. Please hurry back with the next episode. Thank you! Becky W.
Your frustration bespeaks your lake of confidence.
It's always a choice between DIY (Do It Yourself) or PSE (Pay Someone Else) ...
I respect David's confidence in fixing things as they come, and love following this project.
The thing with small and old boats - getting someone to do things can get easily that expensive, that it would cost more than a similar boat without that problem. Most older boats are total economic losses the moment you buy them and will just be "worth" it, if you try to do most things yourself.
Love your 'have a go' attitude.
People that don't know that you can handle (and enjoy!) DIY projects are surely new viewers. They will learn.
Ah don’t worry David, as you said at the beginning. It’s why you’re doing this - to learn (and help us learn something new too).
First of all, I enjoy your multifaceted approach to this channel. This Yankee has learned quite a bit from your efforts. Secondly, and perhaps more importantly I think most of the viewers have faith in your ability to adapt and overcome. I look forward to your future videos.
Thanks for that!
Love your DIY attitude! I've done DIY that I'd never imagined, thanks to vids like yours. :)
The best laid plans of both mice and men sometimes go awry. It’s how you adapt and carry on that’s important. I applaud your efforts good sir.❤
Love the fact you are never really daunted by tasks the many of us wouldn’t dream of attempting. ‘Give it a go’ has worked so far!
To paraphrase, "Bravely bold Sir David, rode forth from Camelot..." This IS going to work, but, as with all my projects, inconvenient things 'turn up'. I loved the phrase, 'Suddenly a little torrent of brown yuck.' Sounds like one of the dinner parties I have attended. Thank you, David, for your SAS-esqe fortitude -Who Dares Wins!
I'd stay away from those dinner parties if I were you
@@CruisingTheCut Ah - to be young again, and to challenge one's digestive tract with fiery curries!
More like "Who Dares: Sinks"
I love this little boat. She's in good hands.
For every naysayer there are dozens of us enjoying the rebuild.
Part of the fun is learning more about your boat!
Keep up the excellent work, we all know that you’ll not let this beat you!
That's the plan!
You go for it David prove em wrong I have faith in you
I am sometimes (most times) too nervous to do a project for fear of screwing it up. Your answer to the suggestions of hiring someone at 3:50 has inspired me. Keep up the great work! Love your vlogs!
#1 YT for content & pure entertainment, cheers & good luck David
For me you’re doing it the right way and not rushing at it like a bull at a gate…. It’ll be great when you finish, it’ll be sooo much stronger and you’ll know exactly how it’s put together (not the case if you pay to have it done by someone else) … Sure they’ll be setbacks and unforeseen things but once completed they’ll be a huge sense of achievement of which you can be proud …. Also think about all the folk you are helping who will also be having a crack at this repair in the near future… this video series will be a ‘go to’ for fiberglass canal boat transom repair …. Great video thankyou for taking the time to record your efforts 👍
I've been following this channel (and Vandemonium) since basically the beginning. I have no doubt you'll see this project through til the end; complete and better than ever. Looking forward to videos of the boat back out on the canals!
I loved your little rant at the start about people telling you to pay somebody to do the job. As you quite rightly said, the fun is Doing it Yourself. The clue is in the name DIY!
I like DIY projects myself. I give you credit for taking on such a complicated one. I will be watching to see how it all comes out.
I hope you're young ..lol
Heck ya! Dig into it for the experience. You got skills and will learn more as you go!
Famous last words.....How hard can it be.
Great video
Loved watching this, it’s your boat, have fun with it!
Warm greetings from the Netherlands🇳🇱.
All very interesting!
Your bevelled joint is, I think, called a scarf joint, much used in wooden-boat building.
I do like your attitude! I have a 'desert island' approach to fixing things, using what I have on board wherever possible. DIY is indeed not about getting someone else to do it. 🙂
Brilliant. So good to watch and listen. You will succeed. Your DIY skills are amazing.
Best of luck. I have learned, over the years, that nothing ever goes as planned. That you suspected that something would go awry, speaks to your experience in this department.
No worries Dave you make us laugh and I`m just watching your latest episode and the hornet was having a fine time. lol. Keep up the good work your videos are a must in our house .🥰
Thanks 👍
I love your eagerness and enthusiasm when you started, I had that when I first got my rotten boat. Unfortunately it didn't last😂. Nearly two years on I'm (very) slowly getting there, just got the fun of the engine to sort next. It's easy when you say it quick.....sort of! I second your opinion of Fish Bump TV, he's great at explaining things in a way you can understand and seems to be a genuine nice guy with lots of knowledge to share without a load of waffle. Highly recommended 👍
That’s how you learn by doing
I am so glad you are still boating after selling your narrow boat
Cut the back off your boat you say? What could possibly go RIGHT?!🤣
Gosh David at a loss for words...Have fun...bless you..take care.
Ahhhhhh😱😱😱😱
This is a real cliffhanger !!! I thought by the end the transom would be off. Anxiously awaiting the next chapter 😵💫
I am 66 years old.
When I was young and living in Southern California, I was "rented out" (child labor) to work on Fiberglas projects - boats mostly.
To this day, I hate Fiberglas.
I breathed in so much of the stuff that I lost my sense of taste and smell for decades.
So, you have my deepest sympathies.
When you do it yourself, you get what you want. Go for it David. 💪
You are fantastically English. It is wonderful to listen to you. It brings a such warm sense of familiarity. You should be proud of your bravery for such an endeavour, it is no small task. I look forward to your updates! Greetings from the midlands.
Cutting parts off of boats?! You have now officially become a pirate.
Yaarr!! 😊
Ahhhhaaaaaaarrrrggghhhh
his shivered his own timbers!😂😂😂
@@CruisingTheCut Heidi would be Proud!!
@@geoffupton I laughed harder than I expected at this :D
@adamnorris8006 yes !
Love your logic, that its "YOUR D.I.Y." scheme, successful or not. We are only here to watch. I personally will come along, looking over your shoulder, as it were, to enjoy the whole experience and celebrate in your triumph at the end and we witness your re-launching, back onto the waterways. Always enjoyed your channel before, no reason to doubt you now, just take care.👍👍👍
How to scrap a boat:
1. buy inflatable kayak and manual drill
2. load said kayak and drill on back of boat
3. drive boat to center of river (preferably the Themse, but most other deep bodies of water will do)
4. Drill hole in bottom of boat (be sure to also drill holes in any flotation devices)
5. get on inflatable kayak
6. row away
7. watch problem solve itself
8. leave country
9. change name
I like your thinking woody!!!.🤣🤣
Super easy, barely an inconvenience.
That would be something to see
I have a 20ft sail boat and have learned all my repair 'skills' from DIY... only way to learn - thank you for being brave enough to video it all for our enjoyment.
What does not kill you, sends you off to buy more supplies and make the project stronger!❤
always a good laugh when your doing a project. keep it going.
Thanks, will do
Loved the video and (especially) the rants, can't believe viewers haven't seen the van channel. Don't scrap Twiggy lots of content there and amusement for us.
Seen the van channel, foreshadowing of things to come!
I've always enjoyed watching a bit of demolition. If David ever needs a rebrand, CursingTheCut would work!
“Is this the fun part? Are we having fun yet?” - random old movie quote that seemed to fit😂
You certainly have a project. Can't wait to see how it turn out. After working in a yacht dealership as a mechanic for over 10 years, I highly recommend that you keep the garboard drain plug. I have seen boat owners leave the plug screwed in when the boat is out of the water for the winter. The boats then can get filled with water from snow melt and rain and in essence sink while on the shore. Removing the plug when the boat is out of the water prevents that from happening. The threads on the plug are tapered like in pipe threads and makes a natural seal. You can always add some Teflon tape on the threads for a little piece of mind.
As you have said David, you will never learn anything until you Do It Yourself. Nothing ventured, nothing gained old boy. But as usual David, It will all come together in the end. Happy day's. 🖖👍If you know the enemy and know yourself, you need not fear the result of a hundred battles. Or something like that. 😉
I like that!
I’ve watched nearly every video of yours as I’ve followed you over the years. This is the most animated I’ve seen you. Mad scientist comes to mind and that boat is your Frankenstein!! 😂
You are doing great. Drill some test holes if needed. Well done.
I'm enjoying this series immensely.
I can't wait for the next episode abd see what's under that fiberglass.
Good luck on getting it off and hopefully no more surprises.
David, I have watched many of your submissions over the years, and humbly ask you to have a good cup of tea, think things through, and get on with it! (And make sure to video it so I can learn too!) 👍
You could do with one of those little cheap USB borescopes that fit onto your mobile phone. That might give you a bit of a view in between the layers or tell you whats wood and whats fibreglass. But yes, scary job indeed! brave man.
Only about a tenner off Amazon.
I don’t about Britain’s auto parts stores but a lot of the auto shops will set you up with one from their loaner tools program.
I just enjoy being part of what you do - just fun watching another person go about doing things. Don’t let others get you down. I often forget to hit the like button but I always enjoy what you are doing. Frankly, your DIY projects are my fav videos. I have a “Best of David” playlist I’ve created for my enjoyment - starts with the baking bread episode, includes the shower remake, … I do watch the Van channel you have as well. - your standing shower was one of my favs. I tackle things on my own as well so I understand your desire to just do things yourself.
Scrap a boat ? What a novel concept. I was under the impression that the procedure of surrendering a boat project was to sell it on to a new restorer 😁
Talk about ending on a cliffhanger 😜
Can't wait until the next installment.
Thanks for sharing David
After refurbishment, Twiggy was renamed Trigger's broom.
I admire and love your bravado. Persevere David and enjoy the unknown and the challenge! I’m cheering for you.
Your BOAT is putting up a good 'scrap' as well! The best way to scrap this boat is probably for you to continue to work on it.😇 Thus far, it seems salvageable.😊
You are hilarious!! So entertaining! Your voice and persona was on high alert for the whole video. I was on the edge of my seat and didn’t take a breath until you said “cheerio” ! Thank you 😁😁
It’s like watching an episode of Mr Bean !!
Brilliant video David and it looks like you fooled most of the viewers. Well done for exploring the boat construction with the multitool and you now have full understanding of the construction details. Now that the difficult bit is out of the way - looking forward to the next phase where you absolutely smash the rebuild of the transom which is clearly well within your capabilities.😀👍⛵️
I always confuse DIY (do it yourself) with DYI (do yourself in). I would have paused eons ago for tea and a cheese sandwich. But I love your attitude.
I know nowt about cruising, am terrified of locks and get seasick on the pirate ship at Scarborough. Yet here I am, mesmerised and totally invested in one man and his boat. I got the nervous sweats for you. Xxx
I feel for you (and for myself as it's bringing back terrible memories 😢). Always a pain when one's carefully crafted assumptions and intelligent guesses are found to be wrong. Don't suppose there's a drawing of the construction to be had?
No plan of battle survives contact with the enemy. You can make all the plans and take all the precautions you want, but typically the moment the first round is fired, it's all in the bin, and you're just making it up as you go along. Have fun, and good luck!
NOAH of the 21 century!
Well done David , your enthusiasm is inspiring.
Thank you for sharing.
Glad you enjoyed it!
David, we just love your DIY. There are always knuckle-heads who try to bring us down to their level. Should keep their opinions to themselves if they have nothing good to say. Love your explanations & humour. Good luck. Regards from New Zealand.
If "this" (the refurbishment) works out then I suggest a renaming ceremony. I think Phoenix might be appropriate.
Very best wishes.
A complete joy as usual David....out of all your vlogs (and I've seen them all) this might be my favourite. From one DIY numpty, whose expertise is far, far inferior to yours (anything I attempt invariably gets labelled as 'rustic'...that covers a multitude of sins) I applaud your enthusiasm and application. I await the sequel with great anticipation.
😀😀🤣🤣
I have little understanding of floating things but, as far as I'm aware, you're OK as long as the front doesn't fall off.
Absolutely right, lots of sailing boats don't have backs anyway.
The hand built fiberglass over wood boat my girlfriend had ( and thankfully sold) just had a 1/2" deep bilge. Bilge pumps only remove water to 1/4" so there was water there all of the time. We could not find a pump that drained it all out. We had to sponge out water before we could go anywhere. And the Marine supply place we used once commented when we checked out with under a $100 amount and they were impressed..Heck, the anti-fouling hull paint was $300 a gallon. I forget what we were paying for the epoxy. She has now bought a 1782 era house the we are restoring. Similar issues but just larger. I really enjoy your channel!
Thank you!
I like your channel as is! I’m speaking of the diversity of subjects, canals restoration, different boats and their owners, even coal barges. Monty Python didn’t just sing “Spam, Spam, Spam”, so you shouldn’t just maim small yellow boats 😂. Keep up the good work
We are renovating too. Frustrating and fun! Equal portions...next spring...tarps for now!
You should speak to Gemma at ship happens. They really know there stuff with fibreglass
David, we love your videos so much. Thank you for sharing this journey with everyone! Good luck with Twiggy...you can do it!
About a week of itchy skin ahead, long sleeves maybe an idea to reduce the itchy feeling. That 49 year old fiberglass loves to give a reminder, I wish I had wormed long-sleeved shirt. Life is a learning curve that never ends.
Life is not a highway, it's a learning curve!!
Congratulations!!! I am glad to see that I am not the only one who figures out the situation, after starting to do the work! It was very surprising how you seemed much calmer about the transome situation, then you seemed to be about responding to comments and answering questions at the front of the vlog. I very much enjoy your content, even though it is not all about referbishing the current project. Thank you!!!
Scrapping it is as ez as slapping a for sale sign on it, but don't throw in the towel just yet, we've watched you accomplish much more daunting tasks than this! Nevermind the laughing or cursing you may hear in the background. 💪👍
That was a nailbiter! Twiggy's makeover is coming along nicely. I love a good cliffhanger. I look forward to part 2.
Real life used boating adventures! Thanks for being so candid for the rest of the world!
another great video, thanks for taking us along!!!
Glad you enjoyed it
If I may offer some constructive advice? Find a decent sized roundabout and trailer the boat there. Tip it on its side and fill it with soil and flowers. Will look lovely in spring.
You're welcome :)
I cannot believe I get enthusiastic when I see the posts for re-doing the boat. Enjoying it. Thank you for filming and editing and posting.
If I may suggest and if you have the resources, think about a portable battery pack (those 200 Wh or the like) that you can put in your van(demonium) so that you can charge tools. Farmcraft101 actually has quite some reviews on those.
Ah but if I'd had the van with me, I wouldn't need a power pack because I'd have the van's electrical setup (4kWh battery, inverter, solar etc)
@@CruisingTheCut true! Forgot that you have big batteries. What I meant is that there portable batteries are portable. That is even without van one can carry them.
@@CruisingTheCut - Details, details.
You’re a brave soul for taking on such a project! With that said, like you mentioned, you’ve accomplished some amazing projects spot on! Looking forward to seeing the end product.
"fish bump TV" sounds like a fish fornication site XD
They have those?! Well I never!!
@@AlphaNerd132 Don't drink water. Fish make love in it.
@@djwarren5081 "you know your drinking fish jizz right?.... ew"
Or maybe piscine porn 😂
Kudos to you for having a crack at it - I've just had the transom replaced in my boat, it was EXPENSIVE!! Mostly labour, so you can save a ton by DIYing it. A tip - use a composite material for the new transom, not wood. It's a bit more expensive but it will never rot again. Here in Australia we call it thermolite, in the US they call it coosa board. That's if you're planning on keeping the boat.