Excellent video. Very informative and it gave me the confidence that I can easily undertake replacing the ignition lock cylinder in my 2008 Chevy Silverado. Had decided I was going to order a new Ignition lock cylinder and do the replacement. First, I want to thank you for sharing your time and expertise. It clearly laid out how to go about making the replacement. As always I read the comments others make to see if there are any tips and ideas shared that might be applicable to my project. Wow, within the first few comments there was one from Orem Lock stating that about "99% of the time you do NOT need to replace the cylinder at all. Just get a new Factory Cut key from a locksmith or dealership. Worn-out keys will cause you to have to jiggle the key in the ignition to turn. A new cut key (Not just a copy) will solve the problem". I immediately thought that since I had been using the same key since 2008 I should take a look at my key. Very worn, so I dug out the second key that came with the truck and tried it. Works like a charm, my ignition lock cylinder issue is gone. Thanks again 1A Auto for the video, time and expertise AND I also want to thank Orem Lock for their comment. The two of you have simple made my day and saved me a few bucks.
+@nancymabry Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
You need to include what to do about the theft deterrent system. Cause I did everything you did ij the video and the truck didn't turn on. I freaked out. Not cool.
If your just changing the cylinder you can literally pop the top cover off and pop the ignition out quickly. I just did it without even disconnecting the battery it ran for a few seconds while I plugged the new one in. If you guys wanna save a few minutes
@@salvatoregallo4409 Sometimes Just go to Dealer get brand new key about $40 should work. It's usually a combination of worn key and cylinder that causes malfunction. So brand new key may work. Not a new copy, that won't work. Must be brand new from key code
Try twisting key from top and bottom using both hands. Grab top of key with right fingers and bottom of key with left fingers. Usually that gets mine to turn and currently it’s pretty bad compared to issues I’ve had in the past
I can’t get my key cylinder back in the correct position. I noticed there are two springs in the back that the flat part of cylinder goes between. Can you rotate those in the back ?
If I replace the ignition lock cylinder in my husband’s truck, will he still be able to use his old key fob to lock, unlock, and automatic start his truck? Thank you in advance!
I would jiggle my key back and forth in order for it to turn. I bought the kit thinking it was the cylinder and the lock tumblers. It was pretty easy and straight forward to uninstall & install back. Didnt really fix the issue. What i do is i stick the key into the ignition pull it out just a bit and it turns perfectly. I believe the key is the issue, i need a new cut key.
Couple of questions: 1. What was your original issue? 2. After changing the cylinder did you have to do any kind of programming or was it a simple take off, put on?
Can’t you just take off the upper cover to get to the spot where you put the pick in to release the cylinder? I’m confused by taking all the stuff off underneath???
Ok so i have a 2009 GMC Sierra 1500 5.3 liter and I can’t turn the key at all anymore I can put the key in and out but can’t turn it on any position at all trying for almost 4days on and off I’m stuck I need help please badly
I bought a cheap set on a very popular shopping site that included the ignition tumbler and door lock cylinder with two keys 5 years ago for my '06 Suburban and they've worked perfectly since I put them in . I kept my old key for the spare tire lock . And I just received another set for my '07 Yukon I bought 5 days ago .
What do you do if your kid didn't disconnect his battery first and pulled the tumbler out while running and now is somehow locked out form installing it
+James Chuaycham ป้อม ศักดิ์ชัย Thanks for watching! You will be able to reuse your original key, but will have to set all of the tumblers with the new part. Here is a video on how that procedure works: ua-cam.com/video/3DKNx7im76s/v-deo.html
99% of the time you do NOT need to replace the cylinder at all. Just get a new Factory Cut key from a locksmith or dealership. Worn-out keys will cause you to have to jiggle the key in the ignition to turn. A new cut key (Not just a copy) will solve the problem.
Yours didn't need those tumblers or whatever? Idk my 08 just stopped turning over today when I got gas. I got power everything it just don't make a noise at all. Key has been a struggle to turn last few weeks but I can still turn it and it don't do nothing still. Pos chevy
+Rick maser We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Nothing replaced in this video requires programming. The key cylinder was replaced which you code the internals to match your current key and it's coding.
Yes fudgin a-sphincter correct they got the best videos they fast forward or delete the things we really don't have to spend time on or wasting time on watching a video and they do it right just like Jimmy Dean's sausage they do it right or they just don't do it I think Jimmy was talking about his girlfriends I'm not sure
+bambinθ Thanks for checking us out! We cannot guarantee this will fix the issue since we cannot look at this however it sounds like the best place to start as it seems like the keys inside are worn out and not engaging properly.
Thanks a lot for this video! Along with your other video with the Suburban that shows how to recode ua-cam.com/video/BkhFQ86qRz4/v-deo.html I was able to do the job in about 30 minutes on my 2008 Silverado.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I always breath a sigh of relief when I see 1A auto has the repair video I need.
Exactly!!!
Excellent video. Very informative and it gave me the confidence that I can easily undertake replacing the ignition lock cylinder in my 2008 Chevy Silverado. Had decided I was going to order a new Ignition lock cylinder and do the replacement. First, I want to thank you for sharing your time and expertise. It clearly laid out how to go about making the replacement. As always I read the comments others make to see if there are any tips and ideas shared that might be applicable to my project. Wow, within the first few comments there was one from Orem Lock stating that about "99% of the time you do NOT need to replace the cylinder at all. Just get a new Factory Cut key from a locksmith or dealership. Worn-out keys will cause you to have to jiggle the key in the ignition to turn. A new cut key (Not just a copy) will solve the problem". I immediately thought that since I had been using the same key since 2008 I should take a look at my key. Very worn, so I dug out the second key that came with the truck and tried it. Works like a charm, my ignition lock cylinder issue is gone. Thanks again 1A Auto for the video, time and expertise AND I also want to thank Orem Lock for their comment. The two of you have simple made my day and saved me a few bucks.
What do you do if you can't turn the key to the start position?
Either drill it or keep turning it and tapping it these often have failed tumblrs
Very valid question. The exact reason I’m changing mine out. Lol
Excellent tutorial! Dorman key set programming was pretty straight forward & instructions were spot on. Thanks,
Great video! Super helpful! Borrowed my husband’s truck, his ignition is worn out!! Ordered one, found your video, and I think this will be easy!
+@nancymabry Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
You need to include what to do about the theft deterrent system. Cause I did everything you did ij the video and the truck didn't turn on. I freaked out. Not cool.
If your just changing the cylinder you can literally pop the top cover off and pop the ignition out quickly. I just did it without even disconnecting the battery it ran for a few seconds while I plugged the new one in. If you guys wanna save a few minutes
was just about to ask, why i needed to take all the extra stuff off.
Did you have to have new keys programmed?
Thanks again. The way you explained it in your clear mellow voice makes it so easy and understandable
Well that's pretty cool.. except for the people who need to change the Cylinder cuz it won't turn lol
What if the lock will not turn to the on position how do I get it out?
Had to drill mine out! Use a dye grinder !
So how do I get the lock out if the cylinder out if the key won't turn
@@salvatoregallo4409 Sometimes Just go to Dealer get brand new key about $40 should work. It's usually a combination of worn key and cylinder that causes malfunction. So brand new key may work. Not a new copy, that won't work. Must be brand new from key code
Try twisting key from top and bottom using both hands. Grab top of key with right fingers and bottom of key with left fingers. Usually that gets mine to turn and currently it’s pretty bad compared to issues I’ve had in the past
How do you get it out if you dont have a key
Wow what an amazing video! I’m ready to tackle this job now! Thanks!
Why doesnt the new ignition cylinder I installed not turn the truck on do I have to replace the security system
I can’t get my key cylinder back in the correct position. I noticed there are two springs in the back that the flat part of cylinder goes between. Can you rotate those in the back ?
If I replace the ignition lock cylinder in my husband’s truck, will he still be able to use his old key fob to lock, unlock, and automatic start his truck? Thank you in advance!
Could you do a video for 2004 Silverado’s or do you already have one? Thanks!
I would jiggle my key back and forth in order for it to turn. I bought the kit thinking it was the cylinder and the lock tumblers. It was pretty easy and straight forward to uninstall & install back. Didnt really fix the issue. What i do is i stick the key into the ignition pull it out just a bit and it turns perfectly. I believe the key is the issue, i need a new cut key.
Did you get a new key? If so, did that solve the problem?
Did it solve it? Having the same issue
@@joncrall4628 did it solve it?
@@MrCneo what about you?
Great vid. saved me shop charges !
Couple of questions:
1. What was your original issue?
2. After changing the cylinder did you have to do any kind of programming or was it a simple take off, put on?
Thanks! This video was very helpful.
Does the set come with new keys? And does your original fob still work?
Does the new cylinder need reprogramming after installation?
I hope it’s as easy as you make it look 😆 😂 😆🤣
I’ve lost my key on a 2008 chevy express, can I buy a new lock cylinder with key and program the key
Yep...need to relearn the key though
How do I re install it . When i put the new one in I wiggle it and it won’t go back in
How you programe the new cylinder key with the car ? I'll try .bat it won't start the engine .
what i can do already change the ignition switch but not starting my truck?
need another work my truck to started??
Do you need to program new key to the vehicle? Ill need a fairly quick response? Thx
+Kim H This does not require reprogramming.
Did anything need to be coded?
Can’t you just take off the upper cover to get to the spot where you put the pick in to release the cylinder? I’m confused by taking all the stuff off underneath???
Great video. Worked like a charm.
did you have to program it?
Any tips on removing the cylinder if the key will not turn the cylinder?
Pull everything off exposing the cylinder pull the plastic piece off the cylinder grab with channel locks and turn
Can I remove my ignition cylinder wit the key , I lost it unfortunately
Ok so i have a 2009 GMC Sierra 1500 5.3 liter and I can’t turn the key at all anymore I can put the key in and out but can’t turn it on any position at all trying for almost 4days on and off I’m stuck I need help please badly
Can I use my old key that is program for truck
Thank you so much
I bought a cheap set on a very popular shopping site that included the ignition tumbler and door lock cylinder with two keys 5 years ago for my '06 Suburban and they've worked perfectly since I put them in . I kept my old key for the spare tire lock . And I just received another set for my '07 Yukon I bought 5 days ago .
Are you confirming I should just buy one off eBay for half price instead of a 100$ one from autozone?
At 2:50 of the video what if I don’t have the old key, how do I pull the ignition cylinder out
drill the pin out
Excelente thank you for y’all help I fix my Silverado
+German Alfaro Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Did you have to get a new key?
What do you do if your kid didn't disconnect his battery first and pulled the tumbler out while running and now is somehow locked out form installing it
When do I need to change the ignition switch and where is it
How much different to do on an 06?
Thanks for the help!!!!
Is this the same for Ltz Models? No programming or anything? Because my keys are chipped
+War Bear The install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Is that a chipped key ?
What if the ignition will not turn to get to the pin hole
Will this work with with existing keys, or it come with new keys?
+James Chuaycham ป้อม ศักดิ์ชัย Thanks for watching! You will be able to reuse your original key, but will have to set all of the tumblers with the new part. Here is a video on how that procedure works: ua-cam.com/video/3DKNx7im76s/v-deo.html
What if key is stuck in start position n can't turn off engine??
How do you get it out if it won’t get out of the like position
Do you know if this also works for a ‘09 sierra?
Yep...no need to remove bottom though. Just pop top cover off
All that extra that you did in the beginning that you didn't need to do
Should have made a video to change the springs inside the lock cylinder.
+I am Strictly We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
You should learn how to request a tutorial respectfully instead of acting like an entitled brat.
How to remove lock cylinder without a key?
99% of the time you do NOT need to replace the cylinder at all. Just get a new Factory Cut key from a locksmith or dealership. Worn-out keys will cause you to have to jiggle the key in the ignition to turn. A new cut key (Not just a copy) will solve the problem.
+Gary Anderson Thanks for the feedback!
Did you habe to reprogram stuff
What is the tumbler key code ?
Yours didn't need those tumblers or whatever? Idk my 08 just stopped turning over today when I got gas. I got power everything it just don't make a noise at all. Key has been a struggle to turn last few weeks but I can still turn it and it don't do nothing still. Pos chevy
Same thing for GMC correct
+Rick maser We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
Yes that’s how you remove it but you forgot to add how to add the lock codes that come with switch and how to install them the way they should go
+Robert Robert Thanks for checking us out!
No problem but video did help a lot 👍✌🏼
What they don't mention is that if you are replacing with new parts your security system has to be reprogrammed to the new key.
Nothing replaced in this video requires programming. The key cylinder was replaced which you code the internals to match your current key and it's coding.
@@constantevo5184 and what does it mean if everything was done correctly and everything turns on dashboard radio etc except the car itself?
@@nelsonmendoza3245 Probably needs key relearn...anti theft issue
@@constantevo5184 how do you code the internals
Yes fudgin a-sphincter correct they got the best videos they fast forward or delete the things we really don't have to spend time on or wasting time on watching a video and they do it right just like Jimmy Dean's sausage they do it right or they just don't do it I think Jimmy was talking about his girlfriends I'm not sure
Went to buy the new cylinder today and the guy said I'd have to get the new one coded at the dealership??
I have to put my key in and out multiple times till the cylinder finally turns to start the truck.will this fix my issue?
+bambinθ Thanks for checking us out! We cannot guarantee this will fix the issue since we cannot look at this however it sounds like the best place to start as it seems like the keys inside are worn out and not engaging properly.
@@1AAuto is it a plug and play situation or I'm going to need a lock smith to make a new key?
Hey, I have the same problem, did you fix it? And what did you ended up doing?
You took way too many parts off. Just pry plastic piece above the ignition off.
+Jesse Hernandez We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
@@1AAuto oh hear ya. I watched hours of videos from you guys and many other mechanics.
I was thinking the same thing
But the new lock doesn't use the same key, correct? So you end up with 2 keys.
yes keep the old key for the door lock
You can get a door lock cylnider that takes the same key . They come as a set for cheap .
Thanks a lot for this video! Along with your other video with the Suburban that shows how to recode ua-cam.com/video/BkhFQ86qRz4/v-deo.html I was able to do the job in about 30 minutes on my 2008 Silverado.
+William Zeigler Thanks for checking us out! 1AAuto.com
My key wont turn forward
+John Smith Thanks for checking us out!
I had to drill and pry mine out!
Mine didn’t start 🙌😭
How do I do this if my lock cylinder will not turn at all?