MEASURE YOUR WATTS! SMD Amplifier Multi Meter / Amp Dyno
Вставка
- Опубліковано 5 лют 2025
- The AD-1, AMM-1 Available now: www.wcCarAudio.com
For more pics/vids: www.stevemeaded...
The purpose of this tool is to enable the user to:
Measure True Amplifier Power output into any load reactive or resistive
Measure Common DC voltages
Measure DC voltage drops during quick transients on cable runs or battery / charging systems
Measure Impedance of speakers at any power or frequency from 20Hz - 1kHz (box rise)
Measure Phase Difference between Voltage and Current into reactive loads (Power Factor)
Find Tuning Frequency of subwoofer enclosures
Tune subwoofer enclosures for maximum power transfer
Measure AC Volts (amplifier output)
Measure AC Amps (amplifier output)
Measure apparent power (VA) output, Phase Angle, and Real Power (Watts) of audio amplifier, or consumption of appliances that run on AC power
Measure Frequency of a Sine Wave
What is included?
The AMM-1 tool
Protective silicon rubber boot
Harness
This manual
Pride of ownership
Specifications
DC Voltmeter: -100 Volts to +100 Volts
AC Voltmeter: 0 - 150 VRMS
AC Ammeter: 0 - 100 ARMS
AC Apparent Power: 0 - 15,000 VA
Power Factor: 50 - 100%
Frequency: 10 - 20,000 Hz
AC Impedance: 0 - 200 Ohms
True Power Dyno: 0 - 15,000 Watts
Auto-shut off timer: 8 - 10 minutes after ON button is pressed
Battery self-test and display of condition when AMM-1 is initialized
Subscribe to this youtube channel today!
Also, check out my other pages:
Instagram: / meade916
Facebook Page here:
/ 59127968198
Follow: / meade916
FOR THOSE WONDERING: THE DGAF PROJECT IS GETTING READY TO START UP AGAIN SOON! XS POWER IS FINALLY GETTING MY 16V BATTERIES (D1600) TO ME AFTER BEING OUT OF STOCK FOR MONTHS! STAY TUNED!
Awesome! Keep us updated man.
YES!
Sweet!!
Man you got me waitin like a kid on Christmas eve
yes! big steve is at it again :D
I would be a recluse if I had a shop like that! you got an awesome job and do awesome work!
Loving the C2 Audio
Meade is the man, simple and plain.
Nice tool Meade,
That's what she said.
Hell yeah man. DGAF project. Can't wait.
Wow, smart engineering... never tought of using this scheme to test amplifiers!
A must have piece of equipment, man this is a feather in the hat for sure!!!
Can't wait to get a hold of this one
AMP TEST Monday lol love these vids Steave
Steve, I love your work and what u bring to the table. I have been watching u do some awesome builds. Keep doing what u doing man .
Nice vid as usual. Loving the look of that amp and numbers as well. Gotta look into them.
dont stop SOTM and keep on keepin on with the cool vids
What about doing a sundown saz-5000d would love to see that thing work and see if it does what its supposed to do...
It's all Sold out, Are you guys not making it anymore?
Cool portable ad1. So what you can do with it is find the max power before it clips?
The AMM-1 factors in and accounts for clipping.
I have a Panasonic CD player with the touch panel do you now where they usually distort
Nice tool.
Very useful tool, mate. Keep it up!
Is it possible to get 1ohm out of two dual2ohm sub's?..I know with one sun you can get that with the way you wire it but if you did the same wiring with two sub's you get .5ohms which I don't want cause the risks but I would like 1ohm oppose to 2ohms..I have the RF p3s and RF T1000
Love the new SMD/ D'amoew multimeter. I was wondering when something like it was gonna be released. Wish I could get my hands on one! Currently I'm not working in car audio but I'm an auto technician, I have a power probe 3 but this would be a great tool to add to my box. How much $ and when can I get one Steve? By the way I love what your doing. Doing it big!
Steve, the insulation jacket on one of the leads of my AMM-1 cracked and I need replacements. Where do I get them?
Very nice!
Hey bro! I have a 2013 f150 that comes with a Sony sound system... The sub it comes with has its own little amp I believe... I want to delete it and add a better amp with a 12 inch sub like a jbl... Is this possible? If so what would something like this run me to have installed ? Thanks..
Nice product Steve. Pretty darn expensive but I guess you have to pay for what you are getting. Do you have a product that just reads how many watts your system is putting out for a cheaper price? Keep up the good work!
Have you done a hifonics brx2400.1 yet ?
Sonic Electronix did....with an SMD AD-1....go check it out.
Does the AMM-1 help with setting the gains too? Or just the DD-1?
Need one yes, yes. Need one. Where can I purchase one and how much mad man?
What is ur take on cheap amplifiers like the ssl 5000d mono block?
@Meade 916 I just came in to a Phoenix gold zpa0.5 Amp with the driver line is that a good amp to push Memphis me 15's?
Can't wait
bad ass a lil out of my price range but deff on my list of things to buy
It's amazing, good job, and thank for share
Love all your work you do
thanks Mack!
if I had the money I would come down just to hear your system Ever since I crossed it 3 years ago I been wanting to do just about the same in my chevy Blazer
Love it!!!
I want to see more of the Toyota project
Ok thanks
C2 doing work! Yee"
this dino where is this on calibratet
this is what I need to test amps with, only thing is I need to build a load bank
Those things should sell out.
So wait...if I get this all I need is this to test how many watts I'm getting out my amp? If so that's genius and I thank you!
Too bad you don’t sell them anymore
Nice
thats a good looking amp tho
out of all the cool gadget u make this 1 is the last 1 I though would ever come about-as soon as I can afford it ill buy 1 for sure this thing will put my buddies who love to talk shit about who has more rms n yadayada- with me & my system this will surly put the weekest in check lol
wow now all u need is a eq box....
Good sh*t
@Meade 916 I just came in to a Phoenix gold zpa0.5 Amp with the driver line is that a good amp to push Memphis me 15's?
this dino where is this on calibratet