That does look like a lot of fun! Try getting 6000 rounds of 5.56 for $10. The other three benefits are that the bb gun is much cheaper than the real sbr, there is no NFA tax, and you can safely shoot it in the backyard. The Umarex replica of the M712 Schnellfeuer (full auto C96) looks like it would also be a lot of fun to plink with.
You really need to show us if both CO2 cartridges actually emptied. I have 3 magazines and none of them actually work correctly. Meaning it only uses the cartridge on the left. And when I go to replace the left cartridge, the one on the right side gasses out. At that point its useless to change the right side one and just replace the left one, and leave an empty one in the right side. I have a solution though. I plan on marketing it to users of the DPMS SBR. It not only corrects for and eliminates the C02, But is also upgrades the unit to 1100 psi PCP air(vs 900 psi CO2). Its a great adaptor. Easy to install, and upgrades to 13 cubic inches of air. Now it really cranks.........I plan on launching sales sometime in 2024 or early 2025. I figure there are around 1 - 2 million of these guns out there that need this mod.
Wow it was windy, nice video man, that wind probably had something to do with accuracy. I never use the Pellet gun oil. Mine works great, except when running out of co-2. It’s a common problem.
HI Justin, if I may. I recommend you get a can of WD40 silicone spray with the folding spray nozzle/needle. It is safe for airgun use and won't damage the seals. Spray it liberally in the magazine BB reservoir and down into the action/workings of the gun. That should do the trick. Oh, and the the Copperhead BB's are notoriously bad and inconsistent. Try a pack of the Daisy BB's that will also help.
Well either I'm slow (possible) or you have a twin. Cause I was just watching (you?) on the Guns of the West channel I have been subscribed to for quite a while now, but today was researching the Crosman DPMS SBR and POOF here (you?) are. LOL Great vid too. Subscribed to this channel as well now. lol
just ordered myself one, doing all the research and stuff i can to know everything there is about the gun lol, that lube tip was pretty cool, shoutout you
don't use copper in the DPMS they are slightly bigger and will cause issues, also get yourself a 300 round mag with built-in reloaded. find a,177 tracer bb glow kit
It loses FPS which each shot because the CO2 is getting cold. If you allow more time between shots it will be more consistent. All CO2 guns are like that, but it doesn't matter no big deal. I just got one of those guns and man it's so much fun! I have never had such a fun BB gun!
To be honest, that looks like some piece of crap that keeps jamming and doesn't lock back on the last BB most of the time. Sounds horrible too, like a metallic farting noise in full auto. I will definitely not be buying this. Thanks for saving me $260 CAD. For full auto fun, I'll keep shooting my PFAM9B which hasn't failed me yet. Thanks for sharing nonetheless.
That does look like a lot of fun!
Try getting 6000 rounds of 5.56 for $10. The other three benefits are that the bb gun is much cheaper than the real sbr, there is no NFA tax, and you can safely shoot it in the backyard.
The Umarex replica of the M712 Schnellfeuer (full auto C96) looks like it would also be a lot of fun to plink with.
You really need to show us if both CO2 cartridges actually emptied. I have 3 magazines and none of them actually work correctly. Meaning it only uses the cartridge on the left. And when I go to replace the left cartridge, the one on the right side gasses out. At that point its useless to change the right side one and just replace the left one, and leave an empty one in the right side. I have a solution though. I plan on marketing it to users of the DPMS SBR. It not only corrects for and eliminates the C02, But is also upgrades the unit to 1100 psi PCP air(vs 900 psi CO2). Its a great adaptor. Easy to install, and upgrades to 13 cubic inches of air. Now it really cranks.........I plan on launching sales sometime in 2024 or early 2025. I figure there are around 1 - 2 million of these guns out there that need this mod.
@Esotericgemini Sorry, not yet. Jsut simply life getting in the way, but looking for 2025 launch.
@Esotericgemini working on it.
Wow it was windy, nice video man, that wind probably had something to do with accuracy. I never use the Pellet gun oil. Mine works great, except when running out of co-2. It’s a common problem.
I bought direct from Crossman website with a coupon for $89. I then bought the optional magazine that holds a ton of bb’s and you just shake to reload
did u hut the 80 dollar mag, if so does it actually hold 300 bbs
I had the issue of the bolt not locking back, i called crosman they sent me a new bolt catch and spring. Fixed the issue
HI Justin, if I may. I recommend you get a can of WD40 silicone spray with the folding spray nozzle/needle. It is safe for airgun use and won't damage the seals. Spray it liberally in the magazine BB reservoir and down into the action/workings of the gun. That should do the trick. Oh, and the the Copperhead BB's are notoriously bad and inconsistent. Try a pack of the Daisy BB's that will also help.
Good tips! Thanks for watching!
Takes any cool 14mm ccw suppressor easily. Got a cheap 8" aluminium Swiss Arms airsoft suppressor for my DPMS..
That’s awesome! Thanks for watching!
i wonder if you can use it for to blow bugs that dont need to be there
Well either I'm slow (possible) or you have a twin. Cause I was just watching (you?) on the Guns of the West channel I have been subscribed to for quite a while now, but today was researching the Crosman DPMS SBR and POOF here (you?) are. LOL Great vid too. Subscribed to this channel as well now. lol
Haha! I’m everywhere! Thanks for watching!
just ordered myself one, doing all the research and stuff i can to know everything there is about the gun lol, that lube tip was pretty cool, shoutout you
Thanks for watching!
Is there any chance that i can put a small silencer on this?
Good revue Dustin.
Thanks for watching!
would you recommend lubing the co2 canisters for the peacemaker by umarex?
Yes. Those CO2 cartridges should always have that drop of lube applied to them. Thanks for watching!
FULLY RECOMMEND. Just fun an amazing gun.
Can this gun be used for self defense?
I wouldn’t recommend it.
@@LegacyAirguns which rifles would you recommend
Yes
@@malindubassmusic1644 B.A.R.
Mine will shot like 3-4 bbs even with auto on. What did I do?
don't use copper in the DPMS they are slightly bigger and will cause issues, also get yourself a 300 round mag with built-in reloaded. find a,177 tracer bb glow kit
Heisenberg having fun
Can it kill a bird ?
I got mine from Crosman and it came defective :(
I love my sbr. Nice video brother. Sub'd
It loses FPS which each shot because the CO2 is getting cold. If you allow more time between shots it will be more consistent. All CO2 guns are like that, but it doesn't matter no big deal. I just got one of those guns and man it's so much fun! I have never had such a fun BB gun!
Yeah, the full auto does affect velocity, but it sure is fun. Thanks for watching!
I don’t understand how a $230 BB gun wouldn’t be accurate..
To be honest, that looks like some piece of crap that keeps jamming and doesn't lock back on the last BB most of the time. Sounds horrible too, like a metallic farting noise in full auto. I will definitely not be buying this. Thanks for saving me $260 CAD. For full auto fun, I'll keep shooting my PFAM9B which hasn't failed me yet. Thanks for sharing nonetheless.
Yea . Does not always lock open at last shot. The Crosman's bolt catch-release button is not the best..
ты че еврей что ли