You're the man! Why has it taken so long for someone to think of such a simple yet, amazingly practical reticle? Now, I'm not saying designing it was simple I'm saying it's not a complicated reticle.
quick question and I apologize if I missed something: at 2:30, you say "this target is BIGGER than the Chevron", but it looks like the (width of) the target is slightly SMALLER than the Chevron (?). Everything else makes sense, assuming that was a verbal typo. It makes total sense that since the Chevron width corresponds to 300 yards and if the target is smaller than that Chevron width, then it would, in fact, be past 300 yards. I hesitate to ask this question, as it seems like I have missed something, but any clarification you could provide on this point would be greatly appreciated. Thanks!
Outstanding, simply outstanding Sir. Still wondering when the METER based ACSS 4X ACOG!!! How about hitting up Trijicon for an ACSS reticle on the VCOG? Now THAT would be the shit!
Trying to pick my first scope is a difficult thing. I keep coming back to the PA 1-8 accs then the raptor pops up making me second guess my choice. I want to buy one scope and not have any buyers remorse later on. Your friends are lucky they can try out all your cool stuff first. Thank you for the video.
I was looking for a scope for my newest build, a 458 Socom and I came across something that I hope you could confirm. ACCORDING to STRELOK, this scope could be used for the 458 socom. Using a zero of about 120 yards for lighter loads, the bottom line for 600 yards .556/.308 comes close to 300 yards. The wind dots are closer to 4 & 8mph rather than 5 & 10 mph. Also, the hash marks for 400, 500, 600 can be used for ranging but instead of 18 inches, it is equivalent to 9 inches. 9 inches is still usable for ranging, just use centerline (zipper, belt buckle, etc) to the outside.
I want that one. When I built my Spikes Tactical 223/5.56 AR I was running low on funds and bought Primary Arms' first Gen 1-6x w/ ACSS reticle. Then the expensive $1200 or $1300 1-8x came out which I wanted but couldn't and last year you guys release a 1-6x and a 1-8x with the new chevron instead of the dot which made me mad cuz there was a cheaper 1-8x out and now here's a more simplified version of the ACSS w/out the range finder on the right side. I've almost everything I've ever bought for ARs which is more than 2 but less than 10 I bought from Primary Arms and got my coworker and dad ordering from there. I alone have probably spent $6000-$8000 ordering from there. Figures no new I'm better stuff is coming out I can't afford any new toys. I really want a 1-8x ACSS Raptor scope. 😭
Love this reticle, IDK why all the higher end FFP LPVO options you offer have super busy reticles. You only offer one, 1-6 SLX and I like it, but I want a GLX or PLX 1-6, 1-8, and 1-10
One question. You have 5 and 10 mph hold offs, but only one set of dots at the 400 yrd. cross. I am assuming the dots are for 10 mph, and the ends of the hashmark are for 5 mph? Thanks.
Primary Arms, LLC No big deal. Easy to overlook, and pretty easy to figure out, looking at the reticle logically. I just wanted to confirm. Thanks. Oh, and nice design. I really appreciate all the work you are doing to bring some awsome reticles and products to us. Keep it up. We are thankful.
I put a Raptor on a 13.7" carbine I built. Love the optic, but haven't had a chance to field test yet going between 100-600, back again and all over yet. According to Strelok Pro, 1" high at 100 should make everything line up super nice with 55gr FMJ. Gonna have to test with some M193 and some 75gr HPBT handloads to see how they line up, but Strelok has always done me right and gets me on target out to 1200 yards with other rifles.
@@scott2228 oh damn that sucks! I haven't had any issues with my build. Even took SOLGW advice and got the SprinCo 'blue' carbine spring and H2 buffer and it runs like a clock.
@@nativewarrior5052 I’m running the blue as well. Only thing I was able to try swapping at the range was the BCG. 🤷♂️ I’ll figure it out!!! That’s part of the fun of putting these together. With the 13.7” barrel, what muzzle device did u go with to hit 16”? I’m running NOX.
Best distance to zero? What is my point of aim point of impact distance using my 300 yard line aim point to get on paper to then later confirm at 100 yards?
on the 3x micro prism, with the raptor 5.56 yards reticle, how many MOA is the bottom of the chevron? based on my calculations, if the 300 yard hold over is also 18" @ 300 yards, then that would equate to the bottom of the chevron( from left tip to right tip) would be approx. 6 MOA.
The only range by me is 50 yards max(using an ar15, 16” barrel). I zero’ed the tip of the chevron at 50 yards, how does that equate at you get to longer distances? Yes, I’m terrible at math haha.
I’m actually debating on a few options of your scopes right now for my 20” 6.5 grendel, so my ears perked up when you said it lighted up well with that round. Where would I zero my 6.5G for this option to be “combat” effective?
I see these now with range brackets on the left and right of the horse shoe. Are those belt to head or foot to head? Sorry I dont know the technical terms for the man size target designations.
So let’s say you put the tip of the chevron on say a 50 yard target an zero it at 50 would that messup the rest of the bullet drops? Is the best way to zero at 100 yards with the tip of the chevron? Problem is I don’t have a hundred yard range I only have 50 yards 🤷🏻♂️
Yes the BDC Tree will be off because its calibrated to 100yards. There are several graphs which show the basic velocity and trajectories of 55gr and 62gr for various zeros. Use those to gues-i-mate your BDC if zeroing outside of 100yds.
It was stated in this video that the donut portion of the reticle is etched, so it will always be red despite possibly despite having a dead battery. For mine, that is certainly is not the case. Are there other models of this scope that I may not know about?
The reticle being laser etched, means that the reticle will ALWAYS be there, and doesn't rely on batteries to function like a holographic sight or red dot. The ILLUMINATION makes the reticle red and runs on a battery, but the optic doesn't need illumination to have a visible reticle. I only use my illumination in low light situations.
I'll be listing the MOA of the Raptor Ret here in a few days when I figure it out. Why Dimitri didnt include those figures.. IDK... He did say a target from the bottom of the chevron to the bottom line is 500 yards away...so I am ass-u-ming that is based on a 5 foot 10 object, so 70 inches at 500 yards, and from the top of the vert line to the bottom is 600 yards..again ass-u-ming 70 inches at 600 means the vert line is a MOA of 35 so 5.8 MOA at 100 yards.
I believe with a FFP scope you should be able to measure on any power. Thats the benefit of it over a SFP scope. As the target grows when you dial up the magnification, as does the retical, ensuring the retical to always be a true representation and available to measure.
Was hoping the only difference between the Raptor 1-6 and the Raptor M2 1-8 would be the high density glass, optical quality, and higher magnification.. Not gonna lie, I'm a little bummed this doesn't have the same reticle you put in that M2 Raptor.. The latter is demonstrably superior.
The velocity matters the most, so yes (basically). The error would be greatest at longer ranges, but wind, skill and bullet quality will be a greater factor then the error produced by the difference between .223 rem and 5.56x45.
What specific bullet weight/load for 5.56 was used for the bdc? I recently attended a class shooting out to 650 yds shooting 55gr ball. Obviously not the best long range round but nevertheless the bdc was way off for that bullet weight. I was holding way off into space at the bottom of the scope at 575 and not able to hit anything past 525. Could have been the ammo but even at 300 I had to hold higher than the bdc indicated. Btw I’m shooting a 16” BCM mid length. Shot the instructors 14.5 BCM shooting 77gr OTM and was getting 1st round hits at 650 with his dope on a mil reticle with a wind hold. Anybody else run into this?
If ya'll could release a version of the ACSS that lets you range estimate a target closer than 400 that is also FFP I would throw my money at you, I'm buying this one for now but im not super focused on targets that are +400 yards out
I just got the 1-8 raptor FFP and I noticed no one is answering questions in the comments so I think we all should if we own the scope. I will be trying to provide information not given.
For longer shots (50-100yds), you can choose a different magnification or whatever works for you, but out closer to 100 yards, use the point of the chevron (if it’s sighted at 100yds). In closer (25-50yds), use the height over the bore to make an estimation. But we’re talking about fractions of an inch. You’ll need to adjust if you’re using a different sight in like 50-200, but this is a ranging reticle, not a precision reticle (although, in the right hands, it’s plenty precise).
@@sailure1 the graduation are fixed each round does not have the same bullet drop no way you can share same reticle holdovers. Thus why NO one else makes a dual 556/308 reticle scope. Only way is if you can adjust / calibrate the individual graduations or 556 / 308 have its own illuminations and the others are hidden?
@@StrapDLBStyle so what you are saying is a professional scope manufacturer with THOUSANDS of hours of testing and HUNDREDS of satisfied customers are wrong..and you are correct.. ok man..
and just to de-fang this incorrect statement by you...graduation marks are simply marks at a set distance apart...things effected by gravity fall at the same rate, their velocity extends only the distance that fall occurred in. Dropping a 1oz pill takes X time to reach the ground, and shooting a 1 oz pill 100 miles an hour still takes the same amount of time for that pill to reach the ground, it just reaches the ground farther away from the place you dropped the other other 1oz pill. the difference between 1oz and 1,1oz and even 2oz would be nearly indistinguishable as would 110MPH or even 125MPH... so in the PA manual it shows that 5.56 M855 62 gr fired from a 14.5" will have the same trajectory as a .223 55gr VMAX, and 7.62x31 / 308 M80 147 with only a +1" upward deviation at 100yards...it also shows the +/- of elevation from sea level giving dope for 1000ft, 2000ft and 3000ft above sea level..this is due to air density....you need to read the manual...
@@sailure1 only hold over you could use is 100. This is just a 300 chart comparison you can see how bad it gets at just 300 let alone more. Wasn't trying to start an argument just sharing it didn't makes sense to me when the bullet drops are not even close.
Great reticle, just sucks it's in such marginal glass. PA is excellent at being average. I'd gladly pay more if it meant y'all would step up your glass and turret game a tad.
Release the Raptor!!
Oof missed opportunity for PA to name it the kraken
You're the man! Why has it taken so long for someone to think of such a simple yet, amazingly practical reticle? Now, I'm not saying designing it was simple I'm saying it's not a complicated reticle.
Tyler idk😀
quick question and I apologize if I missed something: at 2:30, you say "this target is BIGGER than the Chevron", but it looks like the (width of) the target is slightly SMALLER than the Chevron (?). Everything else makes sense, assuming that was a verbal typo. It makes total sense that since the Chevron width corresponds to 300 yards and if the target is smaller than that Chevron width, then it would, in fact, be past 300 yards. I hesitate to ask this question, as it seems like I have missed something, but any clarification you could provide on this point would be greatly appreciated. Thanks!
I love these optics, so far I have the 1-6x gen3 on a 6.5 Grendel and the 3x prism on a 7.62x39 AR. Thanks Dimitri
Outstanding, simply outstanding Sir. Still wondering when the METER based ACSS 4X ACOG!!!
How about hitting up Trijicon for an ACSS reticle on the VCOG?
Now THAT would be the shit!
Trying to pick my first scope is a difficult thing. I keep coming back to the PA 1-8 accs then the raptor pops up making me second guess my choice. I want to buy one scope and not have any buyers remorse later on. Your friends are lucky they can try out all your cool stuff first. Thank you for the video.
What's up Dimitri! Looking forward to the new products this year. Got my eyes on that Apollo Creed!
Great explanation and visual references. Thank you. I love my Prism.
Please do a live stream so our hundreds of questions can be answered.
This is stellar. The big guys and their exorbitant optics should take note.
Till this day//// still my go-to very very accurate!!!!
I was looking for a scope for my newest build, a 458 Socom and I came across something that I hope you could confirm. ACCORDING to STRELOK, this scope could be used for the 458 socom. Using a zero of about 120 yards for lighter loads, the bottom line for 600 yards .556/.308 comes close to 300 yards. The wind dots are closer to 4 & 8mph rather than 5 & 10 mph. Also, the hash marks for 400, 500, 600 can be used for ranging but instead of 18 inches, it is equivalent to 9 inches. 9 inches is still usable for ranging, just use centerline (zipper, belt buckle, etc) to the outside.
I want that one. When I built my Spikes Tactical 223/5.56 AR I was running low on funds and bought Primary Arms' first Gen 1-6x w/ ACSS reticle. Then the expensive $1200 or $1300 1-8x came out which I wanted but couldn't and last year you guys release a 1-6x and a 1-8x with the new chevron instead of the dot which made me mad cuz there was a cheaper 1-8x out and now here's a more simplified version of the ACSS w/out the range finder on the right side. I've almost everything I've ever bought for ARs which is more than 2 but less than 10 I bought from Primary Arms and got my coworker and dad ordering from there. I alone have probably spent $6000-$8000 ordering from there. Figures no new I'm better stuff is coming out I can't afford any new toys. I really want a 1-8x ACSS Raptor scope. 😭
Love this reticle, IDK why all the higher end FFP LPVO options you offer have super busy reticles. You only offer one, 1-6 SLX and I like it, but I want a GLX or PLX 1-6, 1-8, and 1-10
Very cool man. Can't wait to see what other reticles & scopes you will have for us this year.
One question. You have 5 and 10 mph hold offs, but only one set of dots at the 400 yrd. cross. I am assuming the dots are for 10 mph, and the ends of the hashmark are for 5 mph? Thanks.
JunkfoodZombie correct I should have covered that
Primary Arms, LLC No big deal. Easy to overlook, and pretty easy to figure out, looking at the reticle logically. I just wanted to confirm. Thanks. Oh, and nice design. I really appreciate all the work you are doing to bring some awsome reticles and products to us. Keep it up. We are thankful.
I like the ranging on the right side better like the pre iojs acss good job
Raptor is on my “buy list.” Just received my PA 4-14 ACSS scope for an SBR build. Raptor will go a 12.5” to 13.7” carbine.
I put a Raptor on a 13.7" carbine I built. Love the optic, but haven't had a chance to field test yet going between 100-600, back again and all over yet. According to Strelok Pro, 1" high at 100 should make everything line up super nice with 55gr FMJ. Gonna have to test with some M193 and some 75gr HPBT handloads to see how they line up, but Strelok has always done me right and gets me on target out to 1200 yards with other rifles.
@@nativewarrior5052 I put 1 on a 13.7” as well. Took it to the range once. Had cycling issues so never got to really test it out. 🤷♂️
@@scott2228 oh damn that sucks! I haven't had any issues with my build. Even took SOLGW advice and got the SprinCo 'blue' carbine spring and H2 buffer and it runs like a clock.
@@nativewarrior5052 I’m running the blue as well. Only thing I was able to try swapping at the range was the BCG. 🤷♂️ I’ll figure it out!!! That’s part of the fun of putting these together. With the 13.7” barrel, what muzzle device did u go with to hit 16”? I’m running NOX.
@@scott2228 I'm running the same, Sons of Liberty NOX to reach 16". Also using the SOLGW barrel and BCG.
Best distance to zero? What is my point of aim point of impact distance using my 300 yard line aim point to get on paper to then later confirm at 100 yards?
For the 5.56 is there and ideal bullet weight and velocity this was calibrated with?
Finally got this thing out to the range! Super fun to use! Thanks again!
on the 3x micro prism, with the raptor 5.56 yards reticle, how many MOA is the bottom of the chevron?
based on my calculations, if the 300 yard hold over is also 18" @ 300 yards, then that would equate to the bottom of the chevron( from left tip to right tip) would be approx. 6 MOA.
Great intro. Thanks a lot!
SO the 200 mark would be the 50 yard mark as well ? Just wonder if I sight in at 50 at that point with 308 if the rest would be on.
(Tayloring a custom .223 load) What are the MOA substitutions for the 556 100-600 yard Markings?
Would you zero an inch high at a 100 yrds.for the 6.5 Grendel also?.Want to see this for .224 valkyrie.
I wouldn't mind a " notify me" option on the website for this one, Dimitri.
The only range by me is 50 yards max(using an ar15, 16” barrel). I zero’ed the tip of the chevron at 50 yards, how does that equate at you get to longer distances? Yes, I’m terrible at math haha.
I’m actually debating on a few options of your scopes right now for my 20” 6.5 grendel, so my ears perked up when you said it lighted up well with that round. Where would I zero my 6.5G for this option to be “combat” effective?
Do 308 and 556 really drop the same or are there different versions for each caliber.?
I see these now with range brackets on the left and right of the horse shoe. Are those belt to head or foot to head? Sorry I dont know the technical terms for the man size target designations.
Question I only have access to a 25 yd range where would line up on the chevron to zero in my ar? Thank you.
Thank you. Very cool . ready to try it out!
So let’s say you put the tip of the chevron on say a 50 yard target an zero it at 50 would that messup the rest of the bullet drops? Is the best way to zero at 100 yards with the tip of the chevron? Problem is I don’t have a hundred yard range I only have 50 yards 🤷🏻♂️
Yes the BDC Tree will be off because its calibrated to 100yards. There are several graphs which show the basic velocity and trajectories of 55gr and 62gr for various zeros. Use those to gues-i-mate your BDC if zeroing outside of 100yds.
Good stuff as usual Dimitri!
Wow this is a perfect and simple reticle!!!! Any plans on putting it in the 5x prism???Love that chevron!!!!
Cool so we should expect this reticle to start being integrated with ACOG's in the near future?
If I only have a 25 yard range to zero on, where should my poi be to achieve my proper 100 yard zero?
It was stated in this video that the donut portion of the reticle is etched, so it will always be red despite possibly despite having a dead battery. For mine, that is certainly is not the case. Are there other models of this scope that I may not know about?
The reticle being laser etched, means that the reticle will ALWAYS be there, and doesn't rely on batteries to function like a holographic sight or red dot.
The ILLUMINATION makes the reticle red and runs on a battery, but the optic doesn't need illumination to have a visible reticle.
I only use my illumination in low light situations.
Is this the best ACSS rendition, or just equally as good?
This is my first optic I’m putting on my first rifle I’m quite happy with it
Between the two discounted mounts offered, deluxe AR15 & deluxe extended AR15 Which scope mount would you recommend for 556 Raptor?
What is the height of the vertical target for ranging. I heard 18” horizontal . Didn’t get the vertical though .
I'll be listing the MOA of the Raptor Ret here in a few days when I figure it out. Why Dimitri didnt include those figures.. IDK... He did say a target from the bottom of the chevron to the bottom line is 500 yards away...so I am ass-u-ming that is based on a 5 foot 10 object, so 70 inches at 500 yards, and from the top of the vert line to the bottom is 600 yards..again ass-u-ming 70 inches at 600 means the vert line is a MOA of 35 so 5.8 MOA at 100 yards.
When using this scope for 6.5 grendel is it best to set up as 5.56 or 308 with 1” high at 100 yards? And can all 308 scopes be used with a Grendel?
The eyebox on the 1-8 version, will it be as tight as the current one, or will it be a little more forgiving?
What power are you on when your measuring the distance on the retical?
I believe with a FFP scope you should be able to measure on any power. Thats the benefit of it over a SFP scope. As the target grows when you dial up the magnification, as does the retical, ensuring the retical to always be a true representation and available to measure.
Are the bdc figures in the manuel ? per grain ? how about for off calibers like 6.8 spc ?
what’s the BDC for a 10.5” 5.56?
Very nice! What Optic models will this be available in?
Release this already So I can buy!!!
Great stuff, can't wait to get my hands on one, please make more simulation videos
Was hoping the only difference between the Raptor 1-6 and the Raptor M2 1-8 would be the high density glass, optical quality, and higher magnification.. Not gonna lie, I'm a little bummed this doesn't have the same reticle you put in that M2 Raptor.. The latter is demonstrably superior.
Is the entire reticle illuminated?
quick question, muzzle velocity was this designed in mind for?
yeah, every load i can find matches up better with 50/200/300/4/5/6. instead of a 100 yd zero, having a 50 yd zero.
Is this the same for the GLX x2 ? The range finder thingy
How about range estimating from 100-200yds?
Might be a dumb question but can i also use .223 with the 5.56/308 reticle and still be as accurate?
The velocity matters the most, so yes (basically). The error would be greatest at longer ranges, but wind, skill and bullet quality will be a greater factor then the error produced by the difference between .223 rem and 5.56x45.
about the 308...is the point of aim 1inch higher at 100 or point of impact?
What specific bullet weight/load for 5.56 was used for the bdc? I recently attended a class shooting out to 650 yds shooting 55gr ball. Obviously not the best long range round but nevertheless the bdc was way off for that bullet weight. I was holding way off into space at the bottom of the scope at 575 and not able to hit anything past 525. Could have been the ammo but even at 300 I had to hold higher than the bdc indicated. Btw I’m shooting a 16” BCM mid length. Shot the instructors 14.5 BCM shooting 77gr OTM and was getting 1st round hits at 650 with his dope on a mil reticle with a wind hold. Anybody else run into this?
This reticle is calibrated for mil rounds. 62 gr. 5.56
If you would make this optic with the Orion reticle I'd buy it in a heartbeat
Will this be coming out in the 250- 350 dollar range as well
How good will thjis scope do with a 6.5 Creedmore>
Hey I wanna get a raptor 1x6 ffp for my 18 inch 6.5 grendel should I shoot a inch high at 100 on the 308 Verizon?
as per the user manual
This is very helpful.
So does this optic lose the height based ranger on the right hand side of the tube?
NVM I see that's been answered. Just had to finish the video lol
which 556 is this set for? 55gr 62 gr 77 otm?
On the range estimates, do you estimate those at the maximum zoom in, or at the 1 power setting?
Its a front focal plane so power value does not matter on the raptor.
Thank you.
If ya'll could release a version of the ACSS that lets you range estimate a target closer than 400 that is also FFP I would throw my money at you, I'm buying this one for now but im not super focused on targets that are +400 yards out
Been waiting for this thing! Drop that link!
akiraproject24 almost out
Does it have a leads for walking targets?
I just got the 1-8 raptor FFP and I noticed no one is answering questions in the comments so I think we all should if we own the scope. I will be trying to provide information not given.
Will yall do a 300 blk video,
Do you dial in 100 yards at full magnification
Yes.
When will it be available to purchase?
marcus esler after feb
Kind of bummed it doesn’t go past 600 yards. 6X is more than adequate out to 800.
My money is burning a hole in my pocket! When is this going to be released?
so whats the big draw on this on as opposed to the original ACSS reticle on the platinum optics? ua-cam.com/video/MguiGJZipGg/v-deo.htmlm41s
How would you use this reticle to aim at targets closer than 100yd?
Set it at 1x and the circle essentially becomes a single dot for cqb. Take into account height over bore just like a red dot.
For longer shots (50-100yds), you can choose a different magnification or whatever works for you, but out closer to 100 yards, use the point of the chevron (if it’s sighted at 100yds). In closer (25-50yds), use the height over the bore to make an estimation. But we’re talking about fractions of an inch.
You’ll need to adjust if you’re using a different sight in like 50-200, but this is a ranging reticle, not a precision reticle (although, in the right hands, it’s plenty precise).
Is it daylight bright
I don't see a link.
Goddamn this thing is beast
This helps alot
Price range please.
Can you calibrate it for different calibers?
you can zero it to the caliber of the host riflr within the range of given calibers as per the manual.
I like it but the Creedmoor keeps demanding R-Grid. I simply cannot dissuade him from it.
The human shrug. Look up Athena BPR mil
No link but I love it!
ScottyM1959 almost out
My Gf trashed my manual I need the the bullet weight and barrel length info.
she trashed it..tell her to find you one...do you think she would let you off the hook if it was reversed?
You can download a PDF of the manual on Primary Arms website. 👍
How is this both a 556 and 308 retical?
as per the manual you zero the ret differently
@@sailure1 the graduation are fixed each round does not have the same bullet drop no way you can share same reticle holdovers. Thus why NO one else makes a dual 556/308 reticle scope. Only way is if you can adjust / calibrate the individual graduations or 556 / 308 have its own illuminations and the others are hidden?
@@StrapDLBStyle so what you are saying is a professional scope manufacturer with THOUSANDS of hours of testing and HUNDREDS of satisfied customers are wrong..and you are correct.. ok man..
and just to de-fang this incorrect statement by you...graduation marks are simply marks at a set distance apart...things effected by gravity fall at the same rate, their velocity extends only the distance that fall occurred in. Dropping a 1oz pill takes X time to reach the ground, and shooting a 1 oz pill 100 miles an hour still takes the same amount of time for that pill to reach the ground, it just reaches the ground farther away from the place you dropped the other other 1oz pill. the difference between 1oz and 1,1oz and even 2oz would be nearly indistinguishable as would 110MPH or even 125MPH... so in the PA manual it shows that 5.56 M855 62 gr fired from a 14.5" will have the same trajectory as a .223 55gr VMAX, and 7.62x31 / 308 M80 147 with only a +1" upward deviation at 100yards...it also shows the +/- of elevation from sea level giving dope for 1000ft, 2000ft and 3000ft above sea level..this is due to air density....you need to read the manual...
@@sailure1 only hold over you could use is 100. This is just a 300 chart comparison you can see how bad it gets at just 300 let alone more. Wasn't trying to start an argument just sharing it didn't makes sense to me when the bullet drops are not even close.
Great reticle, just sucks it's in such marginal glass. PA is excellent at being average. I'd gladly pay more if it meant y'all would step up your glass and turret game a tad.
Link?
jln370 not out yet
Primary Arms, LLC Will it come out in March???
👏👏
Buying. And the Cyclops. Hurry and take my money!!!
Think I found my next optic.....