SDG
Вставка
- Опубліковано 21 лип 2024
- Hot Air Rework Station Reseller - China Phonefix - A professional phone repair tools and accessories supplier: www.diyfixtool.com/
ATTEN ST-862D (AliExpress): s.click.aliexpress.com/e/_DdT...
ATTEN ST-862D: www.diyfixtool.com/products/a...
Phonefix Giveaways: www.diyfixtool.com/collection...
Picoscope 5000 Series: www.picotech.com/oscilloscope...
Support the Channel with Patreon: / sdgelectronics
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made Solder: solderking.com/
----------------------------------------------------------------------------------------------------------------------
SolderKing UK Made solder available at Kaisertech:
UK JBC Distributor kaisertech.co.uk/ Discount Code: "SDG5"
----------------------------------------------------------------------------------------------------------------------
0:00 Introduction and Pricing
1:31 Handpiece Details
4:38 Main Control Unit
6:23 Inside the ST-862D
10:30 User Interface
15:08 Calibration
16:39 Short Rework Test
17:37 Conclusions
----------------------------------------------------------------------------------------------------------------------
3D Printers:
Ender 3 S1 Pro on AliExpress: bit.ly/3Tfiz22
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Artillery Genius at Banggood: bit.ly/32iG2dv
Geeetech Mizar S on AliExpress: bit.ly/3MN0c0M
Geeetech A20M at Banggood: bit.ly/2YooVll
Geeetech A20M at AliExpress: bit.ly/3oBqo2I
Geeetech PLA+ Filament: amzn.to/3gelSX1
Ender 3 V2 at Banggood: bit.ly/36lN8Ny
Ender 3 V2 at AliExpress: bit.ly/3j1C2CO
-------------------------------------------------------------------------------------------------
Soldering Tools and Equipment:
Aixun T420D On AliExpress: bit.ly/3cQXXhh
Aixun T3B on Aliexpress: bit.ly/3CHerj1
Aixun T3B on Aliexpress: bit.ly/3cDkWIY
Aixun T3A on Aliexpress: bit.ly/30LDcgG
AiXun T3A on Aliexpress: bit.ly/2VdRVhU
Yihua 853A Preheater: www.banggood.com/custlink/DGD...
Youyue 946C Hotplate at Banggood: bit.ly/2MuLwqM
Youyue 946C on AliExpress: bit.ly/374v3Tp
Solder Paste: bit.ly/2E1P5jR
Solder Flux: bit.ly/2MQn7we
Quick 857DW+ Hot Air Station: bit.ly/2OWDvf4
T12 Soldering Station: www.banggood.com/custlink/3KK...
AC Version: www.banggood.com/custlink/3GK...
T12 Iron Tips: www.banggood.com/custlink/3DG...
Daniu Tip Cleaner: bit.ly/31VHwWM
KSGER T12-BCM3 Tip: bit.ly/2xgYXCQ
-------------------------------------------------------------------------------------------------
Microscope Equipment:
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope US: amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope UK: amzn.to/2GYGYFV
Visit my website: www.sdgelectronics.co.uk/
-------------------------------------------------------------------------------------------------
#ElectronicsCreators - Наука та технологія
Hot Air Rework Station Reseller - China Phonefix - A professional phone repair tools and accessories supplier: www.diyfixtool.com/
ATTEN ST-862D (AliExpress): s.click.aliexpress.com/e/_DdTDa4N
ATTEN ST-862D: www.diyfixtool.com/products/atten-st-862d-lead-free-hot-air-gun-soldering-station-for-pcb-repair
Phonefix Giveaways: www.diyfixtool.com/collections/all?sort_by=price-ascending
Picoscope 5000 Series: www.picotech.com/oscilloscope/5000/flexible-resolution-oscilloscope
Support the Channel with Patreon: www.patreon.com/sdgelectronics
Thank you for going over the features and settings.
I haven't had the nerve to try this machine yet.
I think it would be better to describe the temperature in Celsius or Fahrenheit rather than C and F.
there is also a "hidden feature" with the handpiece button. if you press it for at least 3 seconds, you can toggle to blower mode, where the heater is disengaged and you just get airflow at the set speed. i don't know if anyone finds it useful, but hey, now you know!
i like the station quite a lot, have been using it for 3 years now
Please pin this
but I don't understand how one can speak of 1000W by looking at the dimensions of that transformer
@@TheFelix63 the transformer is only supplying 24v for the blower and voltages for the control circuitry, the heater itself is running straight off of 240v. see 6:53
@@bwimtg Ok, sorry, but the cables that enter the heater are a bit small in section
One of the best hot air station I have ever used. I have been using it for almost a year now
I was looking for a Quick but found this one costing a lot less and gave it a try. I was not disappointed and the positive reviews are justified. If I *had* to nitpick something, it's that the buttons on the front panel feel cheap. That's it. Everything else is very nice. Just like some of the other commenters I used to use an Aoyue station and that was a toy in comparison, despite not being much cheaper. Desoldering even big packages takes seconds instead of minutes.
I've been using this for approx 3 months. It works absolutely fine for me. I use it to do a lot of console repairs.
I've had this station for a little over a year. I've got it on a shelf slightly above my desk and the hose is plenty long enough for anything I've used it for.
Thank you for sharing and I have been using this one for about 2 years + and I am not changing unless I can find one that is cheaper and better than this one.
I use one of these. I have it on a shelf above my desk. That way the short hose is no problem.
Nice station. I like the heavy duty strain relief on each end of the handpiece. Looks like great quality for the price.
I currently use the Circuit Specialist CSI 825A and wish I had never bought it. It's noisy and low on air volume. But, at the time I liked the idea of the SMD vacuum pick up tool. Turns out, I very rarely use it. This looks a much better system. Thanks for sharing.
Nice review. I just got one in Nov 2023 after watching your review and others. The hose is longer than mentioned in your review. It measures just about 800mm, so this may be an upgrade/improvement from the model you tested. Thanks for all your reviews. Very informative and enjoyable to watch 😊
i was using a cheap hot air station from a local retailer for years a Duratech Hot Rework Station and it would take a long time to get heat into anything at times i would give up trying to remove stuff. i admit i purchased this device becuase of seeing it on many different board repair yt channels. im glad i did. this things a F#$king beast compared to my old unit i felt like i was in the movie twister when i removed my first chip with it. i dont know why i did not buy one sooner
Got the same station a few weeks ago. They changed the firmware since the Rossman review, "long press of the button switches to cooling mode" feature is no longer present. The hose on my unit is 80cm long. 2 of those straight nozzles should have a structure inside that supposedly swirls the air so that you don't have to do it manually. The largest diameter nozzle is an adapter for older style nozzles. You need a better test case BTW, I had to use it at full blast to remove a memory chip from a GPU. The heater is 1KW but the average power at full airflow is around 700W.
Would you still recommend this station? Wdym by test case?
@@phr3ui559 It still works great but you can find cheaper alternatives that work just as well judging by the reviews. BEST clone seems to be good.
i get the impression that they keep the hose relatively short to match the airflow resistance / impedence against the bldc fan. this aught to be especially true for the atten, as it seems to have a slightly smaller / weaker fan than certain other hot air stations. however it may have a slightly wider diameter hose? to help compensate? i forget now...
but i also feel that the hose on my bst-863 is similarly too short. there is another station out there with a longer hose more comfortable. but again i forget which one it is. but perhaps quick tr1300 can since it does have a beefier fan? i am not sure.... but have often wondered if it could be possible to retro fit a fan replacement of tr1300 to other hot air station models that were not originally designed for it. the replacement part cost however was quite high last i checked about 130 euros. so it is rather too much. maybe easier just to sell the old station and buy a whole new one. except i have become way too attached to this randomhacks ui upgrade for my station. with the potentiometer knobs and all that. such a joy to be adjusting with real dials
I love mine, the only thing is that you must open it up to check the connections to the chassis for the safety ground which was loose...
Looks great and with a temperature response like that you would think they would show the 'Real' temp !....cheers.
"Display of messy code" LOL!
I WISH my Quick had the ON/OFF button on the handle. When I have it on a stand for larger reflows, I have to use a magnet to stop it. Even a button on the station itself would have been a good idea.
I recently get one for about 90 quid delivered, which is no brainer. And it performs very well.
damn, thats a steal!
@@ChriFux happy happy
i love mine! was a huge upgrade from my last hot air station from aoyue. love how fast it heats. i keep my presets for general rework, blast furnace, and heat shrinking. got mine from northridge fix here in california
Nice review Steve.. And not a bad station it seems, well apart from the mentioned shortish hose. I do like the way the nozzle tips attach too. I would hope the sprung bearings are up to the job, & will last with all the heat cycles.
Cheers mate
John
Hi there, thanks for the nice Video. Can you tell me, what kind of brushless Motor controller IC they use?
Thank you very much in advance! All the Best Frederik
Which one is better in terms of manufacture and use. Atten 862d or quik 861
Some users said that atten spoils quickly
Do you like this hot air station more than the Best 863 station for working on the Apple boards?
Mine didnt have nor mode when im trying to scroll the menu 🤣
the transformer has not suffered any damage, they are made in this way by Atten itself
Would you recommend this still in 2024?
Atten or quik 861?
Like mercedes or lada.
nothing can beat this at this price. dont waste money on the cheap yihua shit. get this instead if you want the work to be done