Lightweight is good and what did I use it for it’s a lawnmower ua-cam.com/users/postUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
It's always the smallest thing you never look at... Two simple twists of that adjustment piece and this thing just tried to yank my arms from my shoulder sockets. I exaggerate, but that's what it feels like after only having 1 wheel working for the last 2 years 😅
What if you don’t have one of those adjustment things. I have one closer to the top of the mower and its encased in a piece of hard plastic and i can’t get to it. What I do then????
I have one of these and I've had lots of trouble with the front transmissions. I have replaced two. I was wondering, is there some way to buy a smaller belt and just make it a rear we will drive?
I have one of the same mowers, I'm guessing mine gets hot after fifteen minutes.Then shuts off and won't start until it cools off. What do you think the fix may be?
Hiya, Hoping you might be able to help me with my mower. There's a spring that came off and I'm not sure where Or how it goes back. The reason I was messing around down there was that my mower wasn't shutting off, so Noticed that the cable near the propeller level at the handlebar wasn't going into it sleeve and the machine was not turning off because of that. I had to force the cable back down to shut it off. When i turned it over, i saw there was a bunch of lawn material in the way, so I started scraping it out and then the spring popped off in the rop right corner. Sorry I can't give you more accurate part definitions, This is new to me. Thanks :)
You saying he’s lying? 😂 When they need more adjustment the wheels can/will turn with no load, but you put a load on it and you can see if it actually works.
When I wheeled my mower out from winter storage and took off its cover, I accidently broke off the left handle of the drive housing. So, I think I only need the only need to replace the drive handlebar or whole cable casing on the mower handle of my HU275E mower. All I need to know is the sequence to returning the main cable back into its housing...as far as I can tell, the rest of my mower is working. The electric start button works just fine, started right up, except w/that handle broken the rear left wheel won't turn. Can you help me?
Also the rear Tran goes bad first and only front is pulling, at the price of rear assembly just leave it unless you got a couple of hundred bucks extra
There's another problem with these mowers, he did the right thing checking the simple first, but those plastic wheels have these gear like plastic things that runs with the metal gear. These plastic ones will break and you'll be stuck again....YOu remove the wheel and inside the wheel is a hub that drives it, look for broken teeth on the gears. The wheel assembly is almost 50 bucks too
It's always the smallest thing you never look at... Two simple twists of that adjustment piece and this thing just tried to yank my arms from my shoulder sockets. I exaggerate, but that's what it feels like after only having 1 wheel working for the last 2 years 😅
![How To Replace Self Propelled Drive Cable on Husqvarna Push Lawnmower [Self Propelled Not Working]](http://i.ytimg.com/vi/2mBXfFqTDOU/mqdefault.jpg)
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
you were right my lawn mower needed the same adjustment, thank you so much for sharing
Lightweight is good and what did I use it for it’s a lawnmower ua-cam.com/users/postUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
It's always the smallest thing you never look at... Two simple twists of that adjustment piece and this thing just tried to yank my arms from my shoulder sockets. I exaggerate, but that's what it feels like after only having 1 wheel working for the last 2 years 😅
Thank you for saving me both time and money.
I'm glad it helped you! 👍👍
Yes, that was a quick and easy fix because of you. Thank you, keep it up!!
Great job. The owner should have you do a tune up on it so it is ready to go for another 5 years. Thanks for the video.
I did the tune up...running great again!
What if you don’t have one of those adjustment things. I have one closer to the top of the mower and its encased in a piece of hard plastic and i can’t get to it. What I do then????
Which way do you turn the adjustment cable?
Any idea why the same mower would clunk when put into gear?
I have one of these and I've had lots of trouble with the front transmissions. I have replaced two. I was wondering, is there some way to buy a smaller belt and just make it a rear we will drive?
Thanks! Awesome advice!
👍👍
Great video. Thanks.
Thanks!
Exactly the video I needed.
I have one of the same mowers, I'm guessing mine gets hot after fifteen minutes.Then shuts off and won't start until it cools off. What do you think the fix may be?
Hiya, Hoping you might be able to help me with my mower.
There's a spring that came off and I'm not sure where Or how it goes back.
The reason I was messing around down there was that my mower wasn't shutting off, so Noticed that the cable near the propeller level at the handlebar wasn't going into it sleeve and the machine was not turning off because of that. I had to force the cable back down to shut it off. When i turned it over, i saw there was a bunch of lawn material in the way, so I started scraping it out and then the spring popped off in the rop right corner. Sorry I can't give you more accurate part definitions, This is new to me.
Thanks :)
Figure it out?
Thanks for the video.
You bet
Thanks much for the detailed info 👍
Good job, however would have liked that you raised the front, then the rear wheels to show that the are turning on their own.
You saying he’s lying? 😂 When they need more adjustment the wheels can/will turn with no load, but you put a load on it and you can see if it actually works.
You can see the wheels turn on their own
When I wheeled my mower out from winter storage and took off its cover, I accidently broke off the left handle of the drive housing. So, I think I only need the only need to replace the drive handlebar or whole cable casing on the mower handle of my HU275E mower. All I need to know is the sequence to returning the main cable back into its housing...as far as I can tell, the rest of my mower is working. The electric start button works just fine, started right up, except w/that handle broken the rear left wheel won't turn. Can you help me?
I wish I could edit out my words "only need" that I typed twice, on one of my sentences..sorry
How to change oil
What if you don't have an adjustment on your cable?
If you have the dual trigger kind on the push handle you spin the cable out of the housing of the trigger mechanism to adjust.
Can that adjustment loosen by itself from the vibration??
Of course its very possible unless you put loctite on it and I don't recommend that
Belt stretches over time.
Also the rear Tran goes bad first and only front is pulling, at the price of rear assembly just leave it unless you got a couple of hundred bucks extra
Most have the second belt pulley guard missing from factory and they will not warranty it
New guard 50 bucks
Great video. Btw….it sounds like it’s hot where you live. I think I heard cicadas??
You heard correctly. A gazzilion cicadas in Texas.
I adjusted mine but its not working
great info , thx for sharing sir
Need to zoom in on drive cable attachment; too much shade on the area of interest
Yes, and go slower so this dummy can re attach the cable... Thanks..
People don't worry about the oil, filter until something else goes wrong with them most the time . Investments need maintenanced too .
preventive maintenance is the name of the game
The name of the game is not to be in the game ...
Where in east texas are you?
After replacing the belt,it still didn't work. I tried this. BINGO
Awesome. I'm glad the video helped.
There's another problem with these mowers, he did the right thing checking the simple first, but those plastic wheels have these gear like plastic things that runs with the metal gear. These plastic ones will break and you'll be stuck again....YOu remove the wheel and inside the wheel is a hub that drives it, look for broken teeth on the gears. The wheel assembly is almost 50 bucks too
"It ain't got no gas, mm-hmm."
And got some of them fried tators mm-hmm
I hate this lawnmower. It is designed specifically to throw grass up in the pulleys and belt
Second guard missing on most of them
Not a fan of these AWD mowers. just more things to fail.
I have had mine 6 years 0 issues
Basic mechanical skills can fix.. it's a lawnmower.
@@robginn24 that's not my point. I repair plenty of machines. They're gimmicky. AWD mowers sounds silly.
@@norge696 That's your opinion.
@@norge696 They're nice to have if you deal with hills.
It's always the smallest thing you never look at... Two simple twists of that adjustment piece and this thing just tried to yank my arms from my shoulder sockets. I exaggerate, but that's what it feels like after only having 1 wheel working for the last 2 years 😅
👍👍 awesome
I know that feeling personally 😉😅