If you would like to support my channel plesse check out my wish list and buy something for the channel will also be sohown on the channel www.amazon.co.uk/hz/wishlist/ls/1TU1W0YZ3EZ12?ref_=wl_share
Did all this, thank you by the way.....then looked on the gas tank and the hose was broke off up by the hole.....no wonder it stopped running.....at least the carbs new now... thanks for the help, thumbs UP
One year on but i thank you for these titan videos i think i now know what is wrong with my titan petrol strimmer & hopefully i can fix rather than have to scrap it & buy a new one THANK'S.
I have one of these that’s seized, any chance of a video in the future of how to cure it please? It was running fine until l fell over backwards with it running. It conked out and was locked solid 🤷🏻 don’t think it’s vapour lock as l removed the spark plug etc. Thanks.
They machines are so bad for this issue I have 2 of them in my trailer holding down the plastic that’s protecting the trailer lol I moved on to a full stihl kit for all my garden needs . Great outro brother 👌😁 gb 🙏 you & family
The green B&Q strimmers are the same - they are shipped with an over lean carb setting. 1/4 turn richer usually fixes the issue. You need the Pac man carb tool...
I watched this hoping it would fix my problem but it didn't only because my pull cord is pulled out and realy stiff and it won't start could you help me Rob many thanks Dave
Great video mate. I've got a collection of 2 stroke trimmers. Just find them very handy! My favourite is an echo I got for 20 quid. Runs like a dream, made in 1990. 😁
Hi Rob whereabouts are you pal, I have a Titan and it’s trying to start but won’t, I dropped it since then it won’t start, it’s like no fuel is getting in as spark plug ignites makes the sound but not running , and help pls. Where would you turn up the fuel intake? I am in Sheffield, Thank you Hussain
I’ve got a similar model and the fuel looks a bit thick in the fuel line,,just wondering if there’s a way to completely empty all the old fuel in it,,it’s been sat in the shed for months
Hi Rob, goid video mate keep them coming! My son has one of these, & couldn't get it to run? He gave it to me to sort out? It kept locking up during pulling the cord? I stripped it down & found the piston & ring were damaged. I now need a new piston & cylinder set? Ive seen similar looking units on Amazon, but cant identify their size? Can you help in finding a replacement please?
Hi have titan ttbcp33-4 brush cutter would not rev up so bought new carb and still same problem , there is no mixture adjustment that I can see any ideas ?
Hi mate could be running to rich what ratio of fuel 2 two stroke are you using also got need adjusting at the carburetor but the machine smoking will not do it any harm
Ive got an old titan wont start…hardly had any work…its a very clean machine . It became hard to start couple years ago and bogged down once started . Now it wont start… do you recon its just like yours needing a clean out in the carb. Got the special tool to adjust mixture now. That was next call.
Hi Andy I would start by checking all the fuel lines etc making sure there not perished or cracked if there ok drop some fuel down the head and fire it up if it runs Definitely a carb issue hope this helps mate
@@Robsenginerepairs afternoon Rob…. Checked fuel lines and popped some easy start down plug hole …nothing at all! Does easy start go off? Had it 2-3 years maybe
Did you try using the Premium petrol, to make the mixture with? I have had nothing but trouble with the regular petrol, since the Government decided to put more alcohol in the petrol. I went over to Premium, and no problems with the 2 stroke machines.
Yay! a fellow left-hander, there's not many of us :-) just ordered a new carb for mine, perhaps I should clean the existing one first though, looks easy enough to do after seeing your video, thanks for the help it's appreciated.
I was going to order the PAC man screwdriver but managed to get the screw out cut a slot into the screw and was able to adjust using the carburettor video thanks again. But aye it's a pain with the fuel changing !
Hi Rob, got a small problem with my titan trimmer ,took the handle grip off to change the throttle cable and the springs that held the triggers on/in came out and ive got no idea how they go back, hoping you could tell me or have a vid.
mine starts, idles then as soon as i apply any sort of throttle it cuts off, i’ve done everything to a t from this vid, what were you adjusting at the end of the video??
If its not reving out you will need to adjust the high and low screw while the throttle is getting pulled with the engine running till its at full power
Nice pleasant well explained video, only problem it’s obviously reversed as Triton spells notirt and when you unscrew nuts etc they are going anti clockwise, this did confuse me to start with, thought it was something to do with the Chinese manufacturing. Cheers. John
Got a titan strummer still running like a dog. Friend looked at it. Maybe old fuel? If I run it hard, will it kick out the dirt and new premium fuel (with a dash of two stroke), will run better? And stop losing power?
Great video mate! Can I ask what tool you use to adjust the carb? Mine needs doing and it is a strange head with a dot on it. Titan branded and only 12-18 months old Much appreciated
These carbs don't have any adjustments re mixture, the only adjustment is the idle screw - you can just use a set of pliers to screw it in or out. The only way to adjust the amount of fuel going through the carb into the cylinder is to bend the metering needle retaining flap (inside the section he didn't open).
Hello and yeah it most definitely would as the tank pressures up by the prime to push fuel throughout the carburettor till the engine starts and sucks it through
I have the exact same issue... time to repair :) Step by step tutorial and how easy it is to solve.............Where can you get that tool for tuning the carb?
Hello mick thanks for watching mate and I would recommend a complete different Carb check the link below www.ebay.co.uk/itm/184355394583?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2I6EZvdYQqe&sssrc=2349624&ssuid=bb6VJaAKQRi&var=&widget_ver=artemis&media=COPY
My apologies matey this is the correct one Carburettor, 22cc 26cc 33cc 34cc 36cc 11mm Carburettor Carb fits for MultiTool Hedge Trimmer Brushcutter Chainsaw Engine Parts. amzn.eu/d/iGmTunA
Got the same engine on a hedge trimmer, it starts after a few pulls and will stay running with choke off but as soon as I throttle it it cuts out, I've changed the fuel lines and stripped the carb but still doing the same, is there anything else you can suggest, thanks
Mine keeps making a horrible squealing noise. When the strimmer arm is detached it’s fine. But when I have anything connected to it, regardless of strimmer, hedge trimmers, pruner etc there’s a horrible squealing noise. It cuts fine…for now. Any idea what the issue is and how I can fix this?
@@Robsenginerepairs Sorry for getting back to you so late but I just wanted to tell you that the WD-40 worked a charm! Just so glad I don’t have to open it up and replace the clutch. Thanks so much!
I’m a maintenance technician people bring all sorts to fix. I had one a few days ago less than a year old. He said “it works fine upside down?”That was because the pick up pipe was in two half’s
Can u please at least leave the door open when u running the engine? Kid walked in burning his eyes because of the fumes. Please be careful carbon monoxide can kill. Love ur video. God bless.
Hello mate mines bogging out Tryed cleaning carb no luck I’ve been playing with the fuel mix and sometimes it’s better then just does the same thing I noticed the air filter is loose what should I try ?was working fine yesterday
If you would like to support my channel plesse check out my wish list and buy something for the channel will also be sohown on the channel
www.amazon.co.uk/hz/wishlist/ls/1TU1W0YZ3EZ12?ref_=wl_share
Did all this, thank you by the way.....then looked on the gas tank and the hose was broke off up by the hole.....no wonder it stopped running.....at least the carbs new now... thanks for the help, thumbs UP
One year on but i thank you for these titan videos i think i now know what is wrong with my titan petrol strimmer & hopefully i can fix rather than have to scrap it & buy a new one THANK'S.
Had this exact problem and done exactly what he did step by step and its back working perfect
Thanks dude you saved me money 👍
Also I used wd40 spray which was just as good, I wasn't sure if I could use it or not..
Thanks again
What I'm learning from your channel mate is that titan are not a bad machine if maintained........ Good work
Cheers mate much appreciated and yeah they csn take some hammer
I have one of these that’s seized, any chance of a video in the future of how to cure it please? It was running fine until l fell over backwards with it running. It conked out and was locked solid 🤷🏻 don’t think it’s vapour lock as l removed the spark plug etc. Thanks.
Hello bud try a mixture of transmission fluid and diesel leave it to soak
Just bought one of these so hoping I dont need this for a while but its good to learn a bit. Thanks for thd great video. 👍
They machines are so bad for this issue I have 2 of them in my trailer holding down the plastic that’s protecting the trailer lol
I moved on to a full stihl kit for all my garden needs .
Great outro brother 👌😁 gb 🙏 you & family
Wow thank you so much for this video my machine was driving me nuts you sir are a god send ,happy riding stay awesome🤘
Hello thanks for watching and your more then welcome stay safe
The green B&Q strimmers are the same - they are shipped with an over lean carb setting. 1/4 turn richer usually fixes the issue. You need the Pac man carb tool...
Have the same problem, will follow the process. Thank you sir!
No problem buddy and love the profile pic legend any problems drop me a message
I watched this hoping it would fix my problem but it didn't only because my pull cord is pulled out and realy stiff and it won't start could you help me Rob many thanks
Dave
Having just this problem, will follow your steps
Great video mate. I've got a collection of 2 stroke trimmers. Just find them very handy! My favourite is an echo I got for 20 quid. Runs like a dream, made in 1990. 😁
Absolute machines mate had a few old is gold machines built to last mate
@@Robsenginerepairs Too true. Got a mantis tiller from 1990 that I use once a year. Never fails to start.
Hi Rob whereabouts are you pal, I have a Titan and it’s trying to start but won’t, I dropped it since then it won’t start, it’s like no fuel is getting in as spark plug ignites makes the sound but not running , and help pls. Where would you turn up the fuel intake?
I am in Sheffield,
Thank you Hussain
I’ve got a similar model and the fuel looks a bit thick in the fuel line,,just wondering if there’s a way to completely empty all the old fuel in it,,it’s been sat in the shed for months
Did you find a solution?
@@weescottishladynot yet,,thinking of going for a stily strimmer
Another fine job done Rob
Thanks brother
Hi Rob, goid video mate keep them coming!
My son has one of these, & couldn't get it to run? He gave it to me to sort out? It kept locking up during pulling the cord? I stripped it down & found the piston & ring were damaged. I now need a new piston & cylinder set? Ive seen similar looking units on Amazon, but cant identify their size? Can you help in finding a replacement please?
Hope you got it sorted
Great job rob nailed it again
Thanks Kev buddy
Nice job Rob mate! The 10 mil fairies are at it again. Hello Frankie! Good lad you've got there.
Hi mate and you know Bill forever taking them
Hi have titan ttbcp33-4 brush cutter would not rev up so bought new carb and still same problem , there is no mixture adjustment that I can see any ideas ?
Got to be a mixture screw somewhere bud is the fule mixture correct ratio
Good job Rob and loved the ending with LiL Rob. 🙂👍
Thanks brother hope you and Mrs k are well
We're doing good my friend, hope all is well your way bud.
Mine works if I hold it upside down, but it giving some blue smoke. What could that mean please mate?
Hi mate could be running to rich what ratio of fuel 2 two stroke are you using also got need adjusting at the carburetor but the machine smoking will not do it any harm
Nice Job, will give that a try with mine. Hopefully it will work. 👍
Ive got an old titan wont start…hardly had any work…its a very clean machine . It became hard to start couple years ago and bogged down once started . Now it wont start… do you recon its just like yours needing a clean out in the carb. Got the special tool to adjust mixture now. That was next call.
Hi Andy I would start by checking all the fuel lines etc making sure there not perished or cracked if there ok drop some fuel down the head and fire it up if it runs Definitely a carb issue hope this helps mate
@@Robsenginerepairs cheers ill try that first before tuning carb. Thanks .
@@Robsenginerepairs afternoon Rob…. Checked fuel lines and popped some easy start down plug hole …nothing at all! Does easy start go off? Had it 2-3 years maybe
Did you try using the Premium petrol, to make the mixture with? I have had nothing but trouble with the regular petrol, since the Government decided to put more alcohol in the petrol. I went over to Premium, and no problems with the 2 stroke machines.
Always use premium fuels much better mate or premixed
I have one that only starts with choke OFF, what would that be symptom of? Fresh fuel @ 40:1 mixture.
Hi there does it run OK or is it bogging
@@Robsenginerepairs vibrates a bit at idle, runs ok..ish at half throttle and loses a bit of power at full throttle and can cut out.
Sound like a fuel issue carburetor or fuel lines
@@Robsenginerepairs Cheers, might give some sea foam a try or just strip it down and rebuild / replace lines.
@@_Miner to be honest i think carbs are no more then 10 of amazon mate some Come with fuel lines
First time on your channel . Great stuff .Thanks 👏
Good easy repair. Nice one
Thanks Al mate
Cheers my man just what I need to do with mine appreciate it
No problem buddy 👍
@@Robsenginerepairs top man
Yay! a fellow left-hander, there's not many of us :-) just ordered a new carb for mine, perhaps I should clean the existing one first though, looks easy enough to do after seeing your video, thanks for the help it's appreciated.
Thanks dave and thanks for subscribing mate and they run loads better on the new Carb
He’s not left handed the video has been inverted for some reason - look at the brand name and watch video in a mirror
@@CGfortruth yes l noticed everything he unscrewed was opposite way round to lefty loosy righty tighty 😂
What is the spray you use to clean it .
It's just wd40 mate or gt85
@@Robsenginerepairs Thankyou , going to have a go at fixing mine over the weekend .
Yep exact same issue 👍 I was going to order a new carb might try this. I wonder if the E10 additive is causing issues?
Hi mate most certainly it's the fuel I've had lots of repairs try to use the v power proper fuel if possible
I was going to order the PAC man screwdriver but managed to get the screw out cut a slot into the screw and was able to adjust using the carburettor video thanks again. But aye it's a pain with the fuel changing !
Hi Rob, got a small problem with my titan trimmer ,took the handle grip off to change the throttle cable and the springs that held the triggers on/in came out and ive got no idea how they go back, hoping you could tell me or have a vid.
Hi Paul it's just the return spring for the trigger you mean ? If so I could do a video on it for you no problem
hi Rob, its for both throttle trigger and throttle interlock, that would be great and tell me what you want off your list and i will get it you..
@@paulfreeman4297 no problem buddy and anything towards the channel would be appreciated thank you
Awesome job brother as always 👏 👍
How do you replace the trimmer line on these
Cracking job there Rob 👍👌
Thanks buddy
My Titan I can’t pull the starter cord. ? If I take out the spark plug it is ok.
Hi Fred is the engine pulling over when the plug is out ?
Yes.
Had that problem with mine. Washed cleaned the air filter and worked fine. Lack of air.
Shoukdnthe choke lever vw loose ? Tight
mine starts, idles then as soon as i apply any sort of throttle it cuts off, i’ve done everything to a t from this vid, what were you adjusting at the end of the video??
The high and low screw for the throttle the same thing will need adjusting on yours till it revs out
im going to blow an airline through the carbarator tomorrow to see if that would make any difference
If its not reving out you will need to adjust the high and low screw while the throttle is getting pulled with the engine running till its at full power
Nice pleasant well explained video, only problem it’s obviously reversed as Triton spells notirt and when you unscrew nuts etc they are going anti clockwise, this did confuse me to start with, thought it was something to do with the Chinese manufacturing. Cheers. John
Did it just need tuning ?
Got a titan strummer still running like a dog. Friend looked at it. Maybe old fuel? If I run it hard, will it kick out the dirt and new premium fuel (with a dash of two stroke), will run better? And stop losing power?
This video is back to front but still very informative 😃
Hi it is yes didn't realise till it was up and to late hope it has helped
Great video mate! Can I ask what tool you use to adjust the carb? Mine needs doing and it is a strange head with a dot on it. Titan branded and only 12-18 months old
Much appreciated
These carbs don't have any adjustments re mixture, the only adjustment is the idle screw - you can just use a set of pliers to screw it in or out. The only way to adjust the amount of fuel going through the carb into the cylinder is to bend the metering needle retaining flap (inside the section he didn't open).
Great job runs good 🔧👍
Nice one Rob 👍🏻
Cheers bud
My priming button has a joke in it would this cause my strimmer ti cut out and have little power??
Hello and yeah it most definitely would as the tank pressures up by the prime to push fuel throughout the carburettor till the engine starts and sucks it through
@@Robsenginerepairs once engine is running does it have any function?
@CORRIGEEN71 yes it's part of the system but it can be bypassed with a primer bulb built on the carburettor
I have the exact same issue... time to repair :) Step by step tutorial and how easy it is to solve.............Where can you get that tool for tuning the carb?
There on amazon bud there carburettor tuning tools
@@Robsenginerepairs Ok, thanks for the reply 👍
Nice one Rob
Thanks matey
Got exactly this problem but am a pillock re mechanics. Could you move to south wales and fix mine instead : )
i have ryobi petrol strimmer it got air bubble in primer bulb it want start how do i get rid of air bubbles plarsle
The air bubble shouldn't matter it will push any air out keep priming and running the fuel through
Hi rob, what is that tuning tool you used pleased? Cheers
Hi bud it's called a packman mate
@@Robsenginerepairs thanks mate! Very helpful video as well! My titan decided to do the same thing.
Hi Rob
Having some problems with my titan
TTL488GDO WHAT CARB WOULD YOU RECOMMEND
thanks mate
Hello mick thanks for watching mate and I would recommend a complete different Carb check the link below www.ebay.co.uk/itm/184355394583?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2I6EZvdYQqe&sssrc=2349624&ssuid=bb6VJaAKQRi&var=&widget_ver=artemis&media=COPY
@@Robsenginerepairs as my engine is only 25cc thought that carb would be OK, what you think ? Loving the videos too keep up the good work
My apologies matey this is the correct one Carburettor, 22cc 26cc 33cc 34cc 36cc 11mm Carburettor Carb fits for MultiTool Hedge Trimmer Brushcutter Chainsaw Engine Parts. amzn.eu/d/iGmTunA
Great content mate ,
My multi tool(26cc) starts , runs but gets hot very quickly then cuts out and is hard to start ,can you help ?
Got the same engine on a hedge trimmer, it starts after a few pulls and will stay running with choke off but as soon as I throttle it it cuts out, I've changed the fuel lines and stripped the carb but still doing the same, is there anything else you can suggest, thanks
Diaphragm
Video is flipped left to right so untighten screws anti-clockwise. Good tips though.
Great video.
Whats the spray u are using? Would wd40 do the same
It would mate yes
Thanks for reply, great video
@@wallm30 your welcome bud
Hi man I also have titan trimmer I am having the same problem. I'm in Manchester where is your workshop ?
nice content rob never douted you bro nice machine
Nice one matey
Sounds like a motorcycle that thing runs nice 👍
Only 25cc can take some hammer tho Bill thanks mate
I have tried everything in the video but mine want start at all😢
New carb bud ?
Mine keeps making a horrible squealing noise. When the strimmer arm is detached it’s fine. But when I have anything connected to it, regardless of strimmer, hedge trimmers, pruner etc there’s a horrible squealing noise. It cuts fine…for now. Any idea what the issue is and how I can fix this?
Try dropping a bit of wd40 down the shafts sometimes could be dirt ect failing that could be the clutch on it
@@Robsenginerepairs
Legend thanks so much for your reply. I’ll give this a go and let you know if it works. Thanks again!
@@Robsenginerepairs
Sorry for getting back to you so late but I just wanted to tell you that the WD-40 worked a charm! Just so glad I don’t have to open it up and replace the clutch. Thanks so much!
Your more then welcome mate
Anyone had the problem of not being able to unscrew the spool on the titan 2 in 1 multi tool......2nd time ive got this now
............
I’m a maintenance technician people bring all sorts to fix. I had one a few days ago less than a year old. He said “it works fine upside down?”That was because the pick up pipe was in two half’s
Great video, shame I didn’t see this before I lost my head and took mine to pieces then shoved it in a drawer. 🤣
Ha ha I know what you mean bud and thanks for watching mate
Can u please at least leave the door open when u running the engine? Kid walked in burning his eyes because of the fumes. Please be careful carbon monoxide can kill. Love ur video. God bless.
When buying new fuel pipes for small engines , ignore the yellow type prone to hardening n splitting
Hello mate mines bogging out Tryed cleaning carb no luck I’ve been playing with the fuel mix and sometimes it’s better then just does the same thing I noticed the air filter is loose what should I try ?was working fine yesterday
I've another video on just about the carburetor that will tell you and hopefully sort the problem
For fathers day they should sell a socket set with just 10 mm sockets in it😅
Your video is back to front, so you loosen screws in a clockwise direction.
Mirrored video!
The flipped image is twisting by my melon!
ha ha yeah it's front facing camera sorry dude
Can’t see what ur doin mate
Are you on Facebook mate
Hi mate I am yes
Or my email is on my about page
The problem with that was it was sucking air through the carb gasket , if you tightened the carb nuts 1/4 turn it would have been fixed ,,
Your video is a mirror image so everything is reversed. Just to let you know.
look at the video strimmer a natit not a titan lol
Omg this guy 😂😂😂😂😂😂😂😂
Ffs
Wrong on so many levels
?
Titan tools are awful....avoid