How To Bi-LED Projector Retrofit - Super Easy! Do it Yourself - Toyota 79 Series LandCruiser

Поділитися
Вставка
  • Опубліковано 28 лют 2023
  • How to install retrofit projector headlights! Projector retrofit install DIY!
    This video will show you how to install Bi-LED projectors into your factory headlights! We will cover everything you need to know before attempting this retrofit.
    This has to be one of my favourite mods that we have done to my white Portal 79 Series so far! If you are on the fence, just do it! And do it yourself!
    You will need the following:
    Bi-LED retrofit kit
    Basic hand tools
    Automotive Black Silicone
    We cover every step of the retrofit process in detail so that your finished product will be superb. The basic premise is that you will bake your headlights for around 5-8 minutes, remove the lens from the headlight, remove the shroud from the reflector, install the aftermarket Bi-LED projector, and finally seal the headlight back up.
    Please let me know if you have any questions! Please hit that like and subscribe button! Thanks for watching!
    Link to kit:
    www.pvsautomotive.com.au/coll...
  • Авто та транспорт

КОМЕНТАРІ • 20

  • @Albertautolight
    @Albertautolight 10 днів тому

    Nicely bi Led lens❤

  • @ivansidoruk7542
    @ivansidoruk7542 9 місяців тому

    what about wiring? i wan to do this to a dump truck that had regular headlights. how would i wire this?

  • @Albertautolight
    @Albertautolight 5 днів тому

  • @rocstamalatji448
    @rocstamalatji448 5 місяців тому

    Can this projector work on Toyota Etios Liva ?

  • @berktan9371
    @berktan9371 Рік тому

    Hi, I have H4 bulb headlight. How is the wiring done? Is it easy? Is there any wiring diagram?

    • @PVSAutomotive
      @PVSAutomotive  9 місяців тому

      Its plug n play with our harness

  • @ggwproaster
    @ggwproaster 10 місяців тому +2

    What a poor cutoff for the projectors! What substandard stuff is this?

    • @PVSAutomotive
      @PVSAutomotive  9 місяців тому +1

      They have full adjustment left and right as well as up and down. Thats also 1m away from the roller door.

  • @chaseboatright1186
    @chaseboatright1186 6 місяців тому

    do you have an update on the link yet?

  • @johnnyl3993
    @johnnyl3993 Рік тому

    Can the kit be used on the factory headlights?

    • @PVSAutomotive
      @PVSAutomotive  Рік тому

      Yes any factory headlight with H4 Globes

    • @christurner68
      @christurner68 Рік тому

      How do you control the the motorised adjuster?

    • @PVSAutomotive
      @PVSAutomotive  Рік тому

      @@christurner68 we haven't released the controller but the motors get installed into the headlights so they are future ready.

  • @user-it4gl9fu5h
    @user-it4gl9fu5h 11 місяців тому

    So I assume these are not street legal lights

    • @404-Error-Not-Found
      @404-Error-Not-Found 11 місяців тому +1

      Bi led lights are street legal. If you decide to do red and blue flashing rgb while driving on the roadway, you're going to have a problem.
      Just keep it white on the street.

    • @NobelisBMX
      @NobelisBMX 6 місяців тому

      Bi-LED projector swap is illegal in, at least Europe (possibly elsewhere also). Any other light source, besides the one, designed to be used in original headlight assembly, is not leagal to use. Also, vehicles with Bi-LED headlights must be equiped with self leveling headlight beam mechanism.

  • @reeladventures3196
    @reeladventures3196 9 місяців тому +3

    WTF! The output is about 5 degrees off from being level with the ground. That’s absolute trash. Wouldn’t get that with Mick’s HID retrofits

    • @PVSAutomotive
      @PVSAutomotive  9 місяців тому

      Thanks for commenting. That roller door is around 6m tall and the vehicle has a massive 5 inch lift and 37's so it looks very deceiving.

  • @jhmastanjhmastan2898
    @jhmastanjhmastan2898 5 місяців тому

    Sir your number