I called a licensed painting contractor to get a quote on refurbishing some custom cabinets in our home and some wood flooring. 20 years earlier I had paid $5,000 to a licensed contractor to do the same. This time a salesperson came out who had no knowledge, took pictures with their macbook and then emailed a quote of $24,500. UA-cam saved me with videos like this one. Especially helpful were Ron's suggestions on replacing the hardware with new hardware and not shaking the can but stirring instead to avoid air bubbles. Thanks, Ron!
I just decided last week that I am going to try to refurbish my cabinets. I’m researching options. This video by far has help me to understand what I need to do.
Here, here! I actually believe I can do this; instead of watching 20 minutes of someone else make mistakes, and confusing dialogue of every single thought they have😅
The sequence of events is spot on. Two that are not used by most "flippers" are washing off with a solvent prior to sanding to remove if only some wax and cooking grease. The second is when painting multi layer doors including entry doors is to paint from the inside out saving the horizontals and then the vertical elements for last. The product used is an alkyd and a natural bristle brush is more suitable than a synthetic bristle. Natural bristle brushes should be considered needing pre washing and drying in paint thinner before any painting or clearcoating is done.Working out of paint cans is counterproductive. Transferring the "paint" to a container larger than the volume of paint allows one to see if the "paint" has been completely mixed with no traces of pigment, filler or flattning agents left in the can. A great 5:19 lesson from a pro.. Yep, we can tell...just by the way the sandpaper was folded.
My Grandparents house, RIP. The New Owners Took all the Glass Knobs Hardware off, replaced with cheap plated brass hardware. Then they Painted the Solid Maple Doors, my Grandfather Finished them himself around 1947, and refinished the Varnish over the years. The Varnish was as smooth as glass. There were no Stains Scratches or Chips in the Wood. Makes me sick what they did.
I get paid good money to paint stained cabinets. Usually do a specialty finish over the paint. Looks way better in older homes with too much stained wood. I also do his style of finish also. Never do I use stain and poly.NEVER. It just looks really cheap. After using gell stain,I will spray poly over it.
We are getting ready to remodel our kitchen and want to keep the wood cabinet faces out neighbor made 30+years ago. It doesn't appear that ours have been sealed at all. I'm thinking of just using re-store on them, than some wax made for them. I'll probably do it this way when we remodel our bathroom.
Exactly!!!! I just bought a home where they hired a person to paint the entire interior, and they did such a bad job. They applied primer on cabinets without sanding and also on the door trim. So I removed the primer on the cabinets, and I am about to stain the cabinets.
This video was SO helpful! I have never restained cabinets before, but I watched this video, bought exactly the supplies Ron said to buy, and followed his steps exactly. They turned out amazing! I love how he explains things very thoroughly and understandably even if you have no knowledge coming in.
Hi ali what color stain did use use, I rent so have to stick with something close to the ugly oak.. he stained with something a bit darker than I can go with...thanks
You're the only video I found that solve the missing color scenario. I love the appropriation of stain markers to fill in the bare wood areas. Good job on the video, thank you.
Great lesson Ron! As an "older" woodworker, saving steps is always appreciated....especially from one of your knowledge and talent we can trust. Thank you!
First time coming across this video in May of 2024!! I have searched many UA-cam videos on how to update my kitchen cabinets doing the job myself. Mist of what is see on UA-cam is painting over your wood cabinets. Nothing wrong with that, but it’s not what I was looking for. I want to keep the look of varnish wood but a little deeper color. Your video was perfect! Just what I was looking for! Thank you ❤🙏🏽 😊
Excellent video refreshingly from an expert and not a self centred influencer waffling on with semi accurate info. Loved the matching colour touch up demo
Usually when I look at a how to video on UA-cam I have to look at several to get to what I need to know. I've been painting since I was 19 and I'm now 61. And this is a technique I have never done but I have to bid a job today. So thanks to you not only do I know what to do I know how to bid the job. Plus I don't have to look at for more videos to get her done. You got to love UA-cam thank you for the good advice
Kept searching for a video tutorial like this and took me a while. Thank you for putting this video up. I have two upper cabinets that I secured together to form a moveable island and wanted to stain them a darker color. Now I know how!!!!!
Another way to stir is with a bent wire coat hanger. Straight into a drill then bent at the bottom into a whisk form. It stirs the bottom into the body and doesn't introduce bubbles into the mix. You can stir fast or slow - your preference. By raising and lowering it, you blend the whole thing - or put bends into a length that fits the can and then blend the whole thing together. I use this to blend/mix my stains and paints.
Wish I had seen this before I completely sanded my bathroom cabinets down to the clean white oak surface and refinished with stain and polyethylene. Also use caution when updating the hinges. I removed the old antique brass hinges and replaced with the same kind of oil rubbed bronze hinges. Even though they looked the same, they are different. The screw holes do not line up. I just screwed into another place on the door, but had to drill out the old holes on the cabinets and plug them with dowels before realigning and reinstalling the doors.
I am going to use the same hinges and just clean them thoroughly. The old ones are made really well compared to the new ones. Also, why waste good hinges when I use reuse the old ones. Also, it will be easier just to put them back.
THANK YOU, GOOD ADVICESES, I AM GOING TO TRY IT THIS I HOPE WILL HELP ME BECAUSE I DO NOT PAINT EVER A WOOD KITCHEN CABINET. I HAVE A QUESTION IF I WANT TO PAIN BUT IN A FORMICA CAN BE DONE. AND HOW ? 😊 🙏
Perfect - easy to do after watching this video- And of course, make my life happy 😃 because Happy wife, Happy life 👍 thank you for your guidance and video
Beautiful! I am going to do this. What is the stain you used? This is exactly what I want to do. Stain description would be helpful. Thank you. Update: I did it. looks beautiful as a new cabinet. removing the doors and staining made it look so neat. your tips are great.
The tip about folding abrasive paper into 3 is actually more useful than you would imagine, whether you tear your paper into halfs or quarters isn't the point,the point is you have 3 faces,6 edges and the folding it back on its self means it holds it self together, if just folded in half it just slips...as told to me by my tutor in college on the first day....40 years ago.
One of the things I was really looking for was doing both sides. In my previous projects I have found that the stain/finish application always accumulates where you can't see it from the top until you turn it over. Then it's a chore to get rid of the excess and still make it look good. I'm guessing you rest the door on something smaller then the door to raise it so that you have access to that excess.
I've had that happen to me as well. What I found best is to place a gallon paint can, or something a bit taller, under the item so that as I do each edge I can gently wipe away any finish that may have run under the edge. I use a clean cloth dampened with mineral spirits. I use this same method when I]m staining or painting.
Polyshades works quite well for this. However, you do have to apply it as thin as possible and look over your project carefully for sags on vertical edges. It tends to settle along these edges leaving a darker line. A high quality brush is very important.
Hot cakes, this is a winner! THANKS you can teach me anything. Quality instructions. I found out that style brushing the hard way but it makes you look like a pro.
best how to video I have found for my project. Thank you i am going to refurbish my oak cabinets with combination coating and stain! I'm using whitewash color by minwax polyshades with a natural bristle brush
Thank you so much for making the effort and taking the time to teach us how to do this❣️ Your cabinets look great! I am excited and hopeful of trying this technique! Our cupboard doors look to be some kind of real wood, but the wood veneer on the actual cupboard cabinets is a faux wood finish; can I still use this technique on the faux wood veneer on our rv cabinets? If not, what would you suggest? Thank you for your help!😊🥰 Full time rv’ing and lovin’ it!
Based on my 40 years of experience, now retired, in painting, staining, faux finishing, restoring antique wood finishes in all kinds of furniture, this is the worst advice I have ever heard from someone who is suppose to be a craftsman. My god, LOOK AT THE DETAIL after he is finished showing the before and after. There is all kinds of flaws in the finish!!! YOU NEVER EVER USE A POLYSTAIN in refinishing....PERIOD..and NEVER USE A STAIN PENCIL...PERIOD....Refinishing anything without taking it completely down to bare wood requires time and patience in order to get the stain evenly dispersed around your project no matter what it is. Yes, for the novice, do the prep work he suggests and thats where you stop with this guys advice. Again, for the novice, buy yourself a ' GEL STAIN' and a professional natural bristle brush. I recommend getting the blond bristle. Again, for the novice, you want to take the brush and place it in a container full of mineral spirits and bounce the brush up and down on the bottom for a minute. This will aid in loosing and loose bristles that may be in the ferral. Remove the brush and shake it out by placing it between both your hands and rubbing the brush back and forth causing the brush to swirl back and forth. Put the brush back in the mineral spirits and repeat. Next put the brush back in the it's wrapper that it came in and let it dry over night. Again, for the novice, After you have prepped your project, use a little amount of gel stain on the brush and get in all the crevices first and they all the flat parts and sides, called revels, and let dry over night. Remember to clean the brush each time you use it!! DO NOT USE a lot of gel stain because to do this right you may have to do this a number of times perhaps up to as much as 3 coats for uniformity. Next day, look where all the light spots are, that is where you need to add just a little of the stain. Dab a little on with a non shedding cloth or paper towel than take your brush and sweep very lightly over the area to cover it and feather it into the rest of the wood that is not so light. Let dry. Do this again until you see uniformity. Then apply another light coat of gel stain and let dry and again, look for light spots and repeat what I said above and let dry. Next look for light spots if any, repeat if necessary. After you have uniformity, and your project is dry, apply by spraying, from a can, a light coat of polyurethane to seal in the stain. Let dry. Then you can a use either 2-3 more coats of spray or 2 coast of brush on polyurethane and let dry completely before putting the hardware back on. Now enjoy your project.
Based on my 40 years of experience, now retired, in painting, staining, faux finishing, restoring antique wood finishes in all kinds of furniture, this is the worst advice I have ever heard from someone who is suppose to be a craftsman. My god, LOOK AT THE DETAIL after he is finished showing the before and after. There is all kinds of flaws in the finish!!! YOU NEVER EVER USE A POLYSTAIN for refinishing..PERIOD.. and NEVER USE A STAIN PENCIL...PERIOD....Refinishing anything without taking it completely down to bare wood requires time and patience in order to get the stain evenly dispersed around your project no matter what it is. Yes, for the novice, do the prep work he suggests and thats where you stop with this guys advice. Again, for the novice, buy yourself a ' GEL STAIN' and a professional natural bristle brush. I recommend getting the blond bristle. Again, for the novice, you want to take the brush and place it in a container full of mineral spirits and bounce the brush up and down on the bottom for a minute. This will aid in loosing and loose bristles that may be in the ferral. Remove the brush and shake it out by placing it between both your hands and rubbing the brush back and forth causing the brush to swirl back and forth. Put the brush back in the mineral spirits and repeat. Next put the brush back in the it's wrapper that it came in and let it dry over night. Again, for the novice, After you have prepped your project, use a little amount of gel stain on the brush and get in all the crevices first and they all the flat parts and sides, called revels, and let dry over night. Remember to clean the brush each time you use it!! DO NOT USE a lot of gel stain because to do this right you may have to do this a number of times perhaps up to as much as 3 coats for uniformity. Next day, look where all the light spots are, that is where you need to add just a little of the stain. Dab a little on with a non shedding cloth or paper towel than take your brush and sweep very lightly over the area to cover it and feather it into the rest of the wood that is not so light. Let dry. Do this again until you see uniformity. Then apply another light coat of gel stain and let dry and again, look for light spots and repeat what I said above and let dry. Next look for light spots if any, repeat if necessary. After you have uniformity, and your project is dry, apply by spraying, from a can, a light coat of polyurethane to seal in the stain. Let dry. Then you can a use either 2-3 more coats of spray or 2 coast of brush on polyurethane and let dry completely before putting the hardware back on. Now enjoy your project.
I called a licensed painting contractor to get a quote on refurbishing some custom cabinets in our home and some wood flooring. 20 years earlier I had paid $5,000 to a licensed contractor to do the same. This time a salesperson came out who had no knowledge, took pictures with their macbook and then emailed a quote of $24,500.
UA-cam saved me with videos like this one. Especially helpful were Ron's suggestions on replacing the hardware with new hardware and not shaking the can but stirring instead to avoid air bubbles.
Thanks, Ron!
How did u work
I just received a $20k estimate to repaint my kitchen cabinets. I laughed when I saw it. I'll be doing it myself!
I would not pay 24k to remodel my entire kitchen.
I just decided last week that I am going to try to refurbish my cabinets. I’m researching options. This video by far has help me to understand what I need to do.
I SERIOUSLY appreciate how TO THE POINT this video is. Thank you for sharing. You've given me the confidence to tackle my project.👍
Yes very to the point. Can't wait to start my cabinet staining!
Here, here! I actually believe I can do this; instead of watching 20 minutes of someone else make mistakes, and confusing dialogue of every single thought they have😅
I always watch old people for projects like this. They know how to do it right and easy. Thank you
hes not old!
🥰Good Wisdom! Lol The older you get, the older “older” gets! Enjoy your youth, but prepare and expect to enjoy your “older” too!😄
Smh.... That was a backhanded.
Yes fossils do pack knowledge.
That was rude saying a mature knowledgeable adult is old!
The sequence of events is spot on. Two that are not used by most "flippers" are washing off with a solvent prior to sanding to remove if only some wax and cooking grease. The second is when painting multi layer doors including entry doors is to paint from the inside out saving the horizontals and then the vertical elements for last. The product used is an alkyd and a natural bristle brush is more suitable than a synthetic bristle. Natural bristle brushes should be considered needing pre washing and drying in paint thinner before any painting or clearcoating is done.Working out of paint cans is counterproductive. Transferring the "paint" to a container larger than the volume of paint allows one to see if the "paint" has been completely mixed with no traces of pigment, filler or flattning agents left in the can. A great 5:19 lesson from a pro.. Yep, we can tell...just by the way the sandpaper was folded.
I may actually use this technique in the future. I like how to video wasn't 45 minute. Purely information on the most basic level
Finally someone who's not painting over beautiful wood cabinets.Thanks.
My Grandparents house, RIP. The New Owners Took all the Glass Knobs Hardware off, replaced with cheap plated brass hardware. Then they Painted the Solid Maple Doors, my Grandfather Finished them himself around 1947, and refinished the Varnish over the years. The Varnish was as smooth as glass. There were no Stains Scratches or Chips in the Wood. Makes me sick what they did.
I get paid good money to paint stained cabinets. Usually do a specialty finish over the paint. Looks way better in older homes with too much stained wood. I also do his style of finish also. Never do I use stain and poly.NEVER. It just looks really cheap. After using gell stain,I will spray poly over it.
We are getting ready to remodel our kitchen and want to keep the wood cabinet faces out neighbor made 30+years ago. It doesn't appear that ours have been sealed at all. I'm thinking of just using re-store on them, than some wax made for them. I'll probably do it this way when we remodel our bathroom.
Amen.
Exactly!!!! I just bought a home where they hired a person to paint the entire interior, and they did such a bad job. They applied primer on cabinets without sanding and also on the door trim. So I removed the primer on the cabinets, and I am about to stain the cabinets.
This video was SO helpful! I have never restained cabinets before, but I watched this video, bought exactly the supplies Ron said to buy, and followed his steps exactly. They turned out amazing! I love how he explains things very thoroughly and understandably even if you have no knowledge coming in.
Never have either, wish me luck.
@@Laffy1345 I'm about to do that
Can you please mention what products you bought
I’m curious do you have pic? And what colors did you go with ?
Hi ali what color stain did use use, I rent so have to stick with something close to the ugly oak.. he stained with something a bit darker than I can go with...thanks
You're the only video I found that solve the missing color scenario. I love the appropriation of stain markers to fill in the bare wood areas. Good job on the video, thank you.
Great lesson Ron! As an "older" woodworker, saving steps is always appreciated....especially from one of your knowledge and talent we can trust. Thank you!
Omg! I am so happy I found this! I've had anxiety over my fading kitchen cabinets. Thank you for simplifying the process for me
What a reassuring voice! Thank you for these videos, Ron
First time coming across this video in May of 2024!! I have searched many UA-cam videos on how to update my kitchen cabinets doing the job myself. Mist of what is see on UA-cam is painting over your wood cabinets. Nothing wrong with that, but it’s not what I was looking for. I want to keep the look of varnish wood but a little deeper color. Your video was perfect! Just what I was looking for! Thank you ❤🙏🏽 😊
Did it work for u
Thank u so much. This video gave me courage to do something I never done before and my bathroom cabinets look amazing. Thanks again!!
Excellent video refreshingly from an expert and not a self centred influencer waffling on with semi accurate info. Loved the matching colour touch up demo
Usually when I look at a how to video on UA-cam I have to look at several to get to what I need to know. I've been painting since I was 19 and I'm now 61. And this is a technique I have never done but I have to bid a job today. So thanks to you not only do I know what to do I know how to bid the job. Plus I don't have to look at for more videos to get her done. You got to love UA-cam thank you for the good advice
This video is so informative, motivating, and helpful. I haven’t seen a great tutorial like this in a minute. Thank you.
Thank you so much for such clear, detailed verbal instructions and demonstration.
You are awesome 👍 Ron !!! ...I am tuning in to your videos so I can live a better life 😎👍...You have made my day.
Great video Ron! You saved me hours of work on my beautiful wood cabinets. I love your no nonsense approach as well!
Just did my first staining project. Small bathroom cabinet. Wow. It looks great now. Thanks for making this easy to watch video. Def saved $$ too
Best information I’ve ever seen in just a few minutes wow ! This guy doesn’t beat around the bush! Thank you very much 🙏🇨🇦
Kept searching for a video tutorial like this and took me a while. Thank you for putting this video up. I have two upper cabinets that I secured together to form a moveable island and wanted to stain them a darker color. Now I know how!!!!!
Another way to stir is with a bent wire coat hanger. Straight into a drill then bent at the bottom into a whisk form. It stirs the bottom into the body and doesn't introduce bubbles into the mix. You can stir fast or slow - your preference. By raising and lowering it, you blend the whole thing - or put bends into a length that fits the can and then blend the whole thing together.
I use this to blend/mix my stains and paints.
This video was so informative and encouraging. I have complete confidence that I can do this. Thank you!
EXCELLENT job!
Thank you for the simple, to the point tutorial❣️
This video has helped me refresh soooo many things in my home (kitchen cupboards, baseboards, etc.). Thank you so much for a great video!!
Nice job, no bs ,straight to the point, very easy to understand an clear directions.
Nice to find a no scam video !!’
Great instructional video! Thanks Ron!
I'm so well educated now!!! Thanks!! I'm doing it to my apartment cabinet
very well explained . thank you
Absolutely beautiful! I'm going to do this with our dining room table and chairs! Wish me luck!
Wish I had seen this before I completely sanded my bathroom cabinets down to the clean white oak surface and refinished with stain and polyethylene.
Also use caution when updating the hinges. I removed the old antique brass hinges and replaced with the same kind of oil rubbed bronze hinges. Even though they looked the same, they are different. The screw holes do not line up. I just screwed into another place on the door, but had to drill out the old holes on the cabinets and plug them with dowels before realigning and reinstalling the doors.
I am going to use the same hinges and just clean them thoroughly. The old ones are made really well compared to the new ones. Also, why waste good hinges when I use reuse the old ones. Also, it will be easier just to put them back.
You were better off with that method, trust me. You dodged a bullet.
GREAT WORK! BEAUTIFUL CABINETS! VERY HELPFUL VIDEO!
Excellent job explaining everything, thank you!
Beautiful job! I watched this bc I want to redo my kitchen table without removing everything
Loooove❤❤❤❤❤ I want to do my cabinets watching this!!
Amazing work
Best video I have found so far . Thanks for the info
Wow! This is going to save me a lot of money! Huge Thank YOU!
I can't wait to try this. It actually looks like something I can do. Thanks for sharing
Excellent video with attention to details and to the point. Thank you for sharing.
Thank you, appreciate your knowledge gained from years of experience....so helpful!
Blue Vireo
So helpful.
Helpful. Thank you.
THANK YOU, GOOD ADVICESES, I AM GOING TO TRY IT THIS I HOPE WILL HELP ME BECAUSE I DO NOT PAINT EVER A WOOD KITCHEN CABINET. I HAVE A QUESTION IF I WANT TO PAIN BUT IN A FORMICA CAN BE DONE. AND HOW ? 😊 🙏
.
Great job on the cabinet 👌👌👌👌👌👍👍👍👍👍
I'd like a soundtrack for all of your videos. They're awesome.
Amazing video! I was trying to figure how to do what you just did in this video so thank you
Wow! I’m so glad that I stumbled across this video. You answered all the questions I had. Cant wait to start on mine!
Great job and very teachable video
Beautiful work
Thank you, this video was very helpful, and short and to the point!!! Can't wait to do my cabinets🙂
I love how clear this was! I greatly appreciate it, thanks so much!
thank you for posting this video. it helped me pick Natural Cherry Satin as the stain!
Is that the color of the finished product in this video?
As much as I enjoyed the original score for this video, I also learned something too! Thanks for your handy tips.
Perfect - easy to do after watching this video-
And of course, make my life happy 😃 because
Happy wife, Happy life 👍 thank you for your guidance and video
O.M.G.! Wowza, thank you so much. Loved how to-the-point this video is. Much appreciated
What a video! I will be trying this soon.
i liked how he made refinishing so easy to do.thanks you
Thank you , so much for sharing Sir
I like your video a lot I’ll follow your introduction and do my project
My wood cabinet like yours.
Good job! 👍
Wow! What a great video! Very detailed and clean!
Beautiful! I am going to do this. What is the stain you used? This is exactly what I want to do. Stain description would be helpful. Thank you.
Update: I did it. looks beautiful as a new cabinet. removing the doors and staining made it look so neat. your tips are great.
Hello what colr is the stain. I love it
Brilliant work
The tip about folding abrasive paper into 3 is actually more useful than you would imagine, whether you tear your paper into halfs or quarters isn't the point,the point is you have 3 faces,6 edges and the folding it back on its self means it holds it self together, if just folded in half it just slips...as told to me by my tutor in college on the first day....40 years ago.
You make it look easy!
This was GREAT! Thank you
Very helpful, so much cheaper than buying new ones.
Wow great video
Perfect!!! Easy to follow. Thank you!!
This guy is awesome!
Extremely useful video.
This is great. Very do-able. I am going to try it.
You are giving me courage🤓
just updating my kitchen cupboards wow they look amazing. thanks for your tips :)
One of the things I was really looking for was doing both sides. In my previous projects I have found that the stain/finish application always accumulates where you can't see it from the top until you turn it over. Then it's a chore to get rid of the excess and still make it look good. I'm guessing you rest the door on something smaller then the door to raise it so that you have access to that excess.
I've had that happen to me as well. What I found best is to place a gallon paint can, or something a bit taller, under the item so that as I do each edge I can gently wipe away any finish that may have run under the edge. I use a clean cloth dampened with mineral spirits. I use this same method when I]m staining or painting.
Great advice! Thank you!
Thank you for the great tips, trying to go from dark color cabinets to light color cabinets
GREAT VIDEO 👍
Polyshades works quite well for this. However, you do have to apply it as thin as possible and look over your project carefully for sags on vertical edges. It tends to settle along these edges leaving a darker line. A high quality brush is very important.
What about applying with a cloth?
@@careybowden4864 I have never tried it. A good brush and mineral spirits to clean the brush is not that expensive.
i like to have some foam brushes handy for those areas your referring to.
TBH, I was skeptical at first with the chosen color but it turned out really nice! 😉
Kimberly Eteeyan it looked like candy apple dip lol
Mrs T in short what process did you take on for it....degreased sanded primed ? Any top coat ? Thanks!
Thank you - great video
Thanks, it’s really helpful video
Very Nice 👍
Thanks for the tips. Great job!!
Hot cakes, this is a winner! THANKS you can teach me anything. Quality instructions. I found out that style brushing the hard way but it makes you look like a pro.
You saved my cabinets. Thanks. You should put a donation link below your video. I would love to gift you a cup of coffee.
Nice job 👍
So helpful and wonderfully easy to understand. Thanks 🙏
Looks great. Much better than coating with paint.
Thank you!
Wow that's great!
Thanks for sharing!
best how to video I have found for my project. Thank you i am going to refurbish my oak cabinets with combination coating and stain! I'm using whitewash color by minwax polyshades with a natural bristle brush
How did it turn out?
You are amazing)
Beautiful
Thank you so much for making the effort and taking the time to teach us how to do this❣️ Your cabinets look great! I am excited and hopeful of trying this technique! Our cupboard doors look to be some kind of real wood, but the wood veneer on the actual cupboard cabinets is a faux wood finish; can I still use this technique on the faux wood veneer on our rv cabinets?
If not, what would you suggest? Thank you for your help!😊🥰
Full time rv’ing and lovin’ it!
Thank you for the pointers. I will be re-staining my kitchen cabinets in the next couple of months
Me too!! from golden oak to a beautiful grey!!
Based on my 40 years of experience, now retired, in painting, staining, faux finishing, restoring antique wood finishes in all kinds of furniture, this is the worst advice I have ever heard from someone who is suppose to be a craftsman. My god, LOOK AT THE DETAIL after he is finished showing the before and after. There is all kinds of flaws in the finish!!! YOU NEVER EVER USE A POLYSTAIN in refinishing....PERIOD..and NEVER USE A STAIN PENCIL...PERIOD....Refinishing anything without taking it completely down to bare wood requires time and patience in order to get the stain evenly dispersed around your project no matter what it is. Yes, for the novice, do the prep work he suggests and thats where you stop with this guys advice. Again, for the novice, buy yourself a ' GEL STAIN' and a professional natural bristle brush. I recommend getting the blond bristle. Again, for the novice, you want to take the brush and place it in a container full of mineral spirits and bounce the brush up and down on the bottom for a minute. This will aid in loosing and loose bristles that may be in the ferral. Remove the brush and shake it out by placing it between both your hands and rubbing the brush back and forth causing the brush to swirl back and forth. Put the brush back in the mineral spirits and repeat. Next put the brush back in the it's wrapper that it came in and let it dry over night. Again, for the novice, After you have prepped your project, use a little amount of gel stain on the brush and get in all the crevices first and they all the flat parts and sides, called revels, and let dry over night. Remember to clean the brush each time you use it!! DO NOT USE a lot of gel stain because to do this right you may have to do this a number of times perhaps up to as much as 3 coats for uniformity. Next day, look where all the light spots are, that is where you need to add just a little of the stain. Dab a little on with a non shedding cloth or paper towel than take your brush and sweep very lightly over the area to cover it and feather it into the rest of the wood that is not so light. Let dry. Do this again until you see uniformity. Then apply another light coat of gel stain and let dry and again, look for light spots and repeat what I said above and let dry. Next look for light spots if any, repeat if necessary. After you have uniformity, and your project is dry, apply by spraying, from a can, a light coat of polyurethane to seal in the stain. Let dry. Then you can a use either 2-3 more coats of spray or 2 coast of brush on polyurethane and let dry completely before putting the hardware back on. Now enjoy your project.
Based on my 40 years of experience, now retired, in painting, staining, faux finishing, restoring antique wood finishes in all kinds of furniture, this is the worst advice I have ever heard from someone who is suppose to be a craftsman. My god, LOOK AT THE DETAIL after he is finished showing the before and after. There is all kinds of flaws in the finish!!! YOU NEVER EVER USE A POLYSTAIN for refinishing..PERIOD.. and NEVER USE A STAIN PENCIL...PERIOD....Refinishing anything without taking it completely down to bare wood requires time and patience in order to get the stain evenly dispersed around your project no matter what it is. Yes, for the novice, do the prep work he suggests and thats where you stop with this guys advice. Again, for the novice, buy yourself a ' GEL STAIN' and a professional natural bristle brush. I recommend getting the blond bristle. Again, for the novice, you want to take the brush and place it in a container full of mineral spirits and bounce the brush up and down on the bottom for a minute. This will aid in loosing and loose bristles that may be in the ferral. Remove the brush and shake it out by placing it between both your hands and rubbing the brush back and forth causing the brush to swirl back and forth. Put the brush back in the mineral spirits and repeat. Next put the brush back in the it's wrapper that it came in and let it dry over night. Again, for the novice, After you have prepped your project, use a little amount of gel stain on the brush and get in all the crevices first and they all the flat parts and sides, called revels, and let dry over night. Remember to clean the brush each time you use it!! DO NOT USE a lot of gel stain because to do this right you may have to do this a number of times perhaps up to as much as 3 coats for uniformity. Next day, look where all the light spots are, that is where you need to add just a little of the stain. Dab a little on with a non shedding cloth or paper towel than take your brush and sweep very lightly over the area to cover it and feather it into the rest of the wood that is not so light. Let dry. Do this again until you see uniformity. Then apply another light coat of gel stain and let dry and again, look for light spots and repeat what I said above and let dry. Next look for light spots if any, repeat if necessary. After you have uniformity, and your project is dry, apply by spraying, from a can, a light coat of polyurethane to seal in the stain. Let dry. Then you can a use either 2-3 more coats of spray or 2 coast of brush on polyurethane and let dry completely before putting the hardware back on. Now enjoy your project.
Dannyixoye well do a video on how to do it properly then
@@dannyixoye262 thank you. Taking your advice. Now make a video please
Beautiful! I wish you could come do my kitchen... Its in need!
Very good perfect job 👍
Ok sir, I'm gonna follow your instructions and see what happens! 😍😁
Did you try it? How did it turn out?
@@miadee7037 Well, I tried. Wasnt really happy about it.
@@jayw8726 thanks for letting me know! Guess I won’t be touching mine!
Beautiful! Thank you =]
Thanks buddy. This exact method will work for my "little red kitchen".
Great job. Thank you.