How to Use FX on the Analog Rytm MK2
Вставка
- Опубліковано 26 сер 2024
- This video goes over effects and its various parameters and most importantly what they sound like on the Elektron Analog Rytm MK2. Rather than just talk about the parameters individually, I like to show what each one sounds like and talk about various applications of how to use them.
My Gear (Amazon Affiliate):
Analog Rytm:
amzn.to/3tPWL1y
Elgato Stream Deck:
amzn.to/3tTwTSD
Canon G50:
amzn.to/3lEDvAE
Rode GO Wireless:
amzn.to/3znuNM3
Universal Audio Apollo x4:
amzn.to/39jB5la
RetiCam Tabletop Tripod:
amzn.to/3tS6apk
NEW SINGLE '100 MILE WILDERNESS' OUT NOW!
*Sign up for my site to receive rewards points to be used towards merch discounts!!*
ponchymusic.com
just wanted to say that applying compression on each individual track is not the same as buss compression since the loudest sound will have the most effect on the compressor and thus have the most effect on all sounds. sorry if this is corrected in your compression video, but i felt it needed to be clarified.
No prob and I totally agree. It does depend greatly on the compressor settings however, especially the threshold. If you were to copy/paste the same compressor with the same settings across every track with a high threshold, not every track would trigger the compressor because not every track would hit the threshold. I agree with what you said but it just depends on the compressor settings.
Excellent. This really helped me. Please could you do a video on compression?
Yes! Here you go! ua-cam.com/video/0ONiN4Lzc44/v-deo.html
@@Ponchy oh awesome! Sorry, I'm a new subscriber and hadn't seen this. Loving your tutorials dude. I'll go looking for the performance video next as every other tutorial video on how to acces the performance mode has made zero sense to me. Thanks again :)
@@gadd1111 no prob at all! And I'm just glad to help
Sorry mate, it's not my intent to contradict you but - "there is no actual master track" - there is. Every device has its source and routing, therefore, master bus/track and the output. On AR Master track is the signal path that combines all outputs , master effects, reverb and delay. Architecture of AR allows to detach a track from AR master bus/track and route it separately (which happens by default if you plug a cable into one of the track outputs). In the settings section, it is also possible to re-route tracks from master bus to separate tracks, bypassing compressor and distortion. As for the effects, they can be pre and post distortion, and they can also be routed away from the master bus like so that you sum the return signal of the effects only on a separate track. None of this is possible though, without either
separate physical connections - so if you use AR main out only, everything goes through master bus
overbridge - will allow you to open multiple outputs and route tracks as you wish.
this is very important when it comes to effects. You can have effects processed through distortion, or not.
No problem man and thank you for making that distinction. I suppose I was talking about the master track more in the sense of the Octatrack how you can manipulate it differently and apply different fx.
@@Ponchy I get it. Well , Octatrack has totally different architecture being fully digital machine, as well as that 8th track you can turn into "master". I actually wrote comment above so people are aware of the limitations single output can cause when using AR as opposed to dedicated channels or Overbridge. While I love Ar for being 2many things in the box", i always use it with at least 4 dedicated tracks out of the main bus.
@@earlsfield I definitely appreciate you lookin out, man. It's important for being to be aware of everything they can in order to make the best decision for themselves.
Very helpful. You missed master lfo, which I don't fully understand. ✌️
Yeah I mentioned in the vid how I wouldn’t be going over the LFO and that I would do it in a future vid so keep an eye out for that.
FYI this video is not on your list of Analog Rytm, you might want to add it there ❤
Thanks for letting me know! ❤️
Hi, i really don't understand why i can't compress the kick individually without a connected daw. Is the basic in a professional music production process the ability to compress drum parts individually.
Are u sure such a bug Into this Maschine ?
Hey Massimo! In the video I talk about the sidechain compression and how you can just compress the low end so using that you would be able to achieve kick-only compression however there is no way to compress each pad individually as the compressor is a master effect.
Hey, I lost the default settings for the delay - Could someone be a legend and tell me what they are at? In particular the Time setting? I cant figure it out for the life of me. Thx!
If you wanna reset the delay tab then just hold it and press clear. Hope that helps!
@@Ponchy Thanks man appreciate it!
How do you apply different fx parameters (eg. Delay time or delay feedback) to each track? Everytime I p-lock this to a trig, the entire delay chain for all channels changes too. So is there no way to p-lock track trigs individually?
The only real way to do delay time or feedback, for example, to an individual track is with performance mode or a scene, depending how you want the p-lock to behave. Just select which track/tracks you want the delay to affect and then press fx to goto the delay settings and you will be able to p-lock those delay parameters to a single track or more.