DIY 12v Control Box! | Fused Switch Panel and LED Wiring | Ford Ranger Mods
Вставка
- Опубліковано 23 тра 2022
- Making a 12v control box to make power more accessible from the rear of my tub.
Housing a fused switch panel for lights, extra anderson style plugs and USB's, this is the compact solution I envisioned.
Check out Shenanigans4x4 Merch!
www.bonfire.com/store/shenani...
Links to all eBay items below:
Project Box - ebay.us/LvlNQE
Switch Panel - ebay.us/5gymqb
Fuse Box - ebay.us/x2D3ny
Anderson Plugs - ebay.us/nfhSxs
Isolator Switch - ebay.us/THZNKf
Terminal Block - ebay.us/xq99WH
3mm Dual Core Wire - ebay.us/wWCdo6
6mm Dual Core Wire - ebay.us/TA9gaX
Save an extra 10% on Haynes Repair Manual bundles. Use code - HMBNDL10
haynes.pxf.io/ZQ6v4q
Follow me on:
Facebook:
/ shenanigans4x4
Instagram:
/ shenanigans4x4
Music:
freemusicarchive.org
Crowander - Flash
Soundstripe.com
Beez Kneez - Neon Beach - Авто та транспорт
Very well done. Cheers for the gd ideas 👌
Neat job mate, well done! I think I’ll give that a go now🤙
Cheers mate 👍
Good luck with the project!
Top video mate! I have been looking at doing the same kinda thing 👌
Cheers Trav!
It's a lot easier than it looks once you get your head around it
Thanks for watching 👍
Nice work!
Cheers mate 👍
very helpful gave me some good ideas
Glad it helped mate!
Cheers for watching 👍
Good work bud.
Cheers mate 👍
Hey mate I’ve got the same tub rack and love your setup with the fridge and false floor etc I’m looking to do exact same thing but just with a tonneu soft cover instead! I’m just a bit stumped with how to wire up the lights I haven’t got an auxiliary battery setup yet and I’m wanting to wire them up to the starter battery with a rocker switch on the dash and also reverse lights! How did you wire yours up? Cheers mate love the content! Keep it coming 🤙
Cheers Ethan! Glad you like the content :)
I'm not an auto elec so don't go just of my word.
All I've done is used the dual core wire from the lights to the switch (+) and earth (-), then added a fuse on the positive into the switch.
All earth's go back to the negative side of my secondary battery.
I may add some relays later on but I think the LED's are low enough amperage to run just with the switch (again confirm this before doing it yourself).
Thanks for watching 👍
Awesome video and instructions. Thanks. Can you provide the box dimensions as the link is no longer active. Thanks.
Cheers mate! The box I got was 290 x 210 x 100mm
Thanks for watching 👍
Awesome 🍺
Love your work! What’s the butane torch you are using?
Thanks mate 👍
It's my Snap-on butane soldering iron with the tip taken off
Cheers for watching 🍻
He brother, what size box did you get? Im looking at your links in the decription but there is 4 to choose from? Cheers mate.
Hey mate, I got the largest one 290x210x100mm
@@Shenanigans4x4 Thanks mate. cheers
Kings have a compact control box for less then 100 bucks
Where did you get the plastic enclosure from mate?
Hey mate, check out the project box link in the description 👍
Cheers for watching!
Hello mate,
I follow you on UA-cam, I also have a roof tent and I contacted PPDperformance to get OzRoo tub rack to put the tent on, I would like to know where you got the reinforcement you have in the box for the mountain top roller like mine. thanks if you can answer
Cheers mate!
Check out bespoke_offroad_accessories on instagram
Great quality product and made in Melbourne
@@Shenanigans4x4 thanks my friend greetings from Italy
@@aroundtheworld1963 caio mate!
Does it still come out cheaper after buying the tools?
Not if you include the tools no
The assumption is that these tools and the wire would be needed anyway if buying a pre-built box to add in your accessories
Always good to have handy also when out and about for any repairs
Hey mate, where did you get the box from?
Hey Jack, check the description I put a link in there 👍
Cheers for watching!
Seriously dig this control box. The link has expired unfortunately what's the diameters of the box if you don't mind?
Hey mate, dimensions were 290 x 210 x 100mm
Cheers for watching 👍
@Shenanigans4x4 thank you appreciate it ima try get the same and build along with you
Mate do you know things that’s problematic on the px2 ranger 3.2 I am thinking of buying one
Hey mate, mines only a PX1. I would suggest the Ranger owners group on Facebook for advice: facebook.com/groups/452268501615524/?ref=share
Every car has its problems but that's all people talk about, not how great they are
@@Shenanigans4x4 yea I know I just wanted to ask you mate