Nice work dude! I just got my first scooter 87 elite 50s and I finally got it driving around after sitting for 30 years. Watching your videos got me going. Thank you
9:13 check the masses usually all boosters have this problem which can be solved by putting a wire that secures the mass from the chassis to the engine block
Hey if your looking for a stock like noise level but want extra power I can recommend the Tecnigas Silent Pro. They don’t scream like an expansion chamber and look cheesy like the stock system but they go really well and are quiet. 55mph easy
I have typhoon 50 2011 watching this very epic. I wanna upgrade it to 70cc but feel like it's better to get something more light plus feel sorry for my stock crank...
Hey i have a question i have a 50cc mbk and im learning wheelies on it ,but I read somewhere that wheelies are actually bad for your engine ,so i just want to confirm if it's ok to wheelie your bike withiut destroying it
@@MOPBOYZ Yeah I know. I've watched every episode. Asked coz if I remember correct, there was some issues with it and it was not yet functioning as it should.
Hey bro I have a 2000 Aprilia sr-50. It has a 70cc MHR rep, 19mm carb & a either Technigas Next R or Leo Vince pipe. That I would part with for $150, I have keys and title if interested. I live in Reno NV not too far away. I would love to see you build it. All the plastics are good etc.
Ile start with feel better brotha💯🤙 And I’ve been looking at like the Polini team 4 pipe, yasuni r, or stage6 pro rep and currently am about to try the Malossi flip🤙 The flip is suppose to be comparable to stock pipe bottom end wise but a little more peppy top end wise, I’m also running a contessa, cp21 and s6 intake
Hey, if you haven’t bought the Flip yet - the Gianelli V2 Extra is the exact same pipe with different logos. It’s at least £30 cheaper and comes with rollers too! How Malossi thinks they can put their logo on an exhaust and charge at least £30 more is a complete joke! I bought a Flip then discovered the Gianelli V2 Extra and I was mad. Real mad 😂
Hi there Mopboy, as an expert on anything that has to do with our beloved Yamaha BWS/Booster/Zuma I can tell you that the exhaust you have there which you don't know the brand isn't no eBay special but rather a Firebox best suited for stock and slightly modified engines,👍🏻🇵🇹🙋🏻♂️.
@@MOPBOYZ Let me think🤔...Taking into account that this Firebox exhaust model is made only for vertical Minarelli engines I guess that then the exhaust you have there must've gotten bent somehow, maybe it was due to a crash or maybe even the previous owner tried to bend it on that particular section so that it could be fitted on a different kind of scooter🙄, which one was it only God can say for sure...
@@MOPBOYZ I'm more of a deep expert with BWS's, never disassembled a Booster so far nor have I a Zuma, I know there are particular differences here and there like on the fairings, frame, stickers, colors and under the fairings as well,all minor details, but when it comes to the block/case my guess is that there aren't any differences as far as the eye can see, much less when it comes to the holes for the exhaust screws wether that be on the exhaust flange mount or to the 2x screw mounts on the side of the block.Surely all 4 holes must be off a few microns if we were to check all 3 Yamaha models but not in such a way where one couldn't fit a particular exhaust to them 🙄.
@mopboyz you thought about opening a community discord, so we can all share photos, stories, videos and chat? could post on there when your uploading and do some cool stuff man!
Try running nitro methanol it’s a hobby store, airplane race fuel it runs better than gasoline I guarantee that you’ll keep buying and putting it in all your scooters.
All the bolts stripped bc they are not American Phillips head. They look the same but they are Japanese Phillips don’t know the real name. U should be using a screwdriver made for these or u run the risk of stripping them out.
Nice work dude! I just got my first scooter 87 elite 50s and I finally got it driving around after sitting for 30 years. Watching your videos got me going. Thank you
heck yea man , glad to hear it’s back running 💪🏼
9:13 check the masses usually all boosters have this problem which can be solved by putting a wire that secures the mass from the chassis to the engine block
sleeper build?
Nice built i just finished building my piaggio zip 172cc scooter
Bro in itali we have the first series of this mbk called Booster spirit , After they created first bws , and they created zooma for the usa market .
Hey if your looking for a stock like noise level but want extra power I can recommend the Tecnigas Silent Pro.
They don’t scream like an expansion chamber and look cheesy like the stock system but they go really well and are quiet. 55mph easy
bro this is my dream bike this build looks so cool too love from the UK ✌
LETS GOOO!!! i was looking eirlyer today to see if there was a new video out, im so hype man congrats!
Appreciate it!!
i was driving on icy roads last night with my piaggio typhoon, sketchy shit but we got home ;)
Is that the stock 105mm converter or a 107mm from a minarelli horizontale engine ?
try a yasuni c21 on some bike or gianelli go because low end torque and it will be adream to wheelie
Try the stage 6 pro replica mk1 its Loud asf but it rips
try the polini pipe
cant wait for the test drive, but i would like to hear it with different exhaust!!
Where are the bolts from tho I need!
amazon !
Looks good like always
I have typhoon 50 2011 watching this very epic. I wanna upgrade it to 70cc but feel like it's better to get something more light plus feel sorry for my stock crank...
Toronto Canada love
Let's see some more f12 content 🛵
Hey i have a question i have a 50cc mbk and im learning wheelies on it ,but I read somewhere that wheelies are actually bad for your engine ,so i just want to confirm if it's ok to wheelie your bike withiut destroying it
No its not bad
@@mathiasleys625 i learned how to wheelie and you right my moped is still fonctioning well
try find a jazen cono exhaust thay rip real hard
love the vids bro sick bws keep up the consistent vids🔥
Ayyy another vid lets go
The exhaust pipe is a Proma reverse replica
what's your opinion on stunting w a stock scooter?
you can’t stunt anything on wheels!
Is the Derbi/Piaggio LC build buried?
it was motor swapped to an rc-one engine, theres a lot of vids on it on the channel
@@MOPBOYZ Yeah I know. I've watched every episode. Asked coz if I remember correct, there was some issues with it and it was not yet functioning as it should.
nice bike keep up the good work man you shold get a gilera stalker
You should get a Piaggio bike, would be really cool to see you swap a 125 under something nice!
We never see americans do that :(
which year model is this? is this 1997 or 2013
2001
The 2nd you put the stock clutch back on my stoner ass laughed so hard. I've made that mistake a few times just running on autopilot I swear.
Hey bro I have a 2000 Aprilia sr-50. It has a 70cc MHR rep, 19mm carb & a either Technigas Next R or Leo Vince pipe. That I would part with for $150, I have keys and title if interested. I live in Reno NV not too far away. I would love to see you build it. All the plastics are good etc.
dm me on instagram @mopboyz
the exhaust is a rare old polini marmitta!
First off > feel better. And I do like the stock pipe... so get her done wheely master. Old man mop peace out***
Ile start with feel better brotha💯🤙 And I’ve been looking at like the Polini team 4 pipe, yasuni r, or stage6 pro rep and currently am about to try the Malossi flip🤙 The flip is suppose to be comparable to stock pipe bottom end wise but a little more peppy top end wise, I’m also running a contessa, cp21 and s6 intake
Hey, if you haven’t bought the Flip yet - the Gianelli V2 Extra is the exact same pipe with different logos. It’s at least £30 cheaper and comes with rollers too! How Malossi thinks they can put their logo on an exhaust and charge at least £30 more is a complete joke!
I bought a Flip then discovered the Gianelli V2 Extra and I was mad. Real mad 😂
@@exgtt2061 I’ve had the flip for a couple months now, seems decent so far🤷♂️ but I may want a little more later down the road
Hey, i was wondering maybe you could sell me one USA type headlight for zuma? Because here in europe it cost alot.
i don’t have any for sale right now but check some of the prebug pages on facebook there’s always parts being listed !
Looks like a arrow exhaust
I hope Have this one rare Moped here indonesia
Hi there Mopboy, as an expert on anything that has to do with our beloved Yamaha BWS/Booster/Zuma I can tell you that the exhaust you have there which you don't know the brand isn't no eBay special but rather a Firebox best suited for stock and slightly modified engines,👍🏻🇵🇹🙋🏻♂️.
i googled firebox and it looks like thats it forsure, but thats strange how it doesnt line up to the minarelli engine at all
@@MOPBOYZ Let me think🤔...Taking into account that this Firebox exhaust model is made only for vertical Minarelli engines I guess that then the exhaust you have there must've gotten bent somehow, maybe it was due to a crash or maybe even the previous owner tried to bend it on that particular section so that it could be fitted on a different kind of scooter🙄, which one was it only God can say for sure...
@@thedownhillerboy is booster /bws have slight differences maybe in the exhaust holes on the case? or are they exact same minarelli engine?
@@MOPBOYZ I'm more of a deep expert with BWS's, never disassembled a Booster so far nor have I a Zuma, I know there are particular differences here and there like on the fairings, frame, stickers, colors and under the fairings as well,all minor details, but when it comes to the block/case my guess is that there aren't any differences as far as the eye can see, much less when it comes to the holes for the exhaust screws wether that be on the exhaust flange mount or to the 2x screw mounts on the side of the block.Surely all 4 holes must be off a few microns if we were to check all 3 Yamaha models but not in such a way where one couldn't fit a particular exhaust to them 🙄.
@@MOPBOYZ exact same engine bws booster slider and zuma
Big W!
@mopboyz you thought about opening a community discord, so we can all share photos, stories, videos and chat? could post on there when your uploading and do some cool stuff man!
Yazuni R , is best C16 is full rev demanding crazyness unreal day to day usage unles your in a full track
buy a zip type 3 it weighs 80kg its easy to wheelie
Try running nitro methanol it’s a hobby store, airplane race fuel it runs better than gasoline I guarantee that you’ll keep buying and putting it in all your scooters.
Isn't that like 20 bucks a litre?
Spell it bweez not b w s
U make it look to easy
why didnt you say that 15 years ago!!(grounded cdi) i sold mine because of that. But thanks now i know 😉
i read FiRST ART!
Damn how many zumas?? 😂😂
too many now hahaha
First💪
All the bolts stripped bc they are not American Phillips head. They look the same but they are Japanese Phillips don’t know the real name. U should be using a screwdriver made for these or u run the risk of stripping them out.
Tey some fresh plastic
it is not yamaha, yamaha start the production from 200*something, that is an mbk booster, maibe spirit
no…. it’s yamaha lol. they started in 1989 . i have a 1989 yamaha zuma and a 1990 zuma lol
1sy
Try the stage 6 pro replica mk1 its Loud asf but it rips